Good Morning,
After I forgot my security code I went a did a hard reset only to find that my phone wasn't passing the boot logo.
I went ahead and tried to use ODIN but after many attempts all have failed, after reading up I realised am in fact on firmware 4.3 and cannot downgrade to firmware 4.11 thats on sammobile site. Is there anyway I can get firmware 4.3 and still use ODIN to flash?
Also tried updating from SD Card but failed.
Also, when I am in Download mode this is what I am seeing:
ODIN MODE
Product Name: SGH-i747
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader AP Swerv: 2
What does all this mean?
Hi,
I tried downloading a custom Rom but I cant use ODIN to install it, I have to send it to my SD Card and try to install it there.
Can you tell me how to install the Custom Rom using ODIN ?
I have this Custom ROM I747UCUEMJ2.7z
Hi
Thanks for writing to us at XDA Assist. Are you still having this problem?
No response in two days, thread closed, thanks.
Related
hi all,
sprint samsung galaxy s5, SM-G900P user. turn on phone, get a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." error. here's what the rest of the screen says:
PRODUCT NAME: SM-G900P
CURRENT BINARY: Custom
CURRENT SYSTEM: Custom
REACTIVATION LOCK (KK): OFF
KNOX WARRANTY VOID: 0xl (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
VOC START
this error came about as i was trying to install the custom ROM MOAR here. didnt know that 5.0 android version = having OA6 so i was trying to install that per the thread's instructions. so that messed up somehow and i get the above error. download mode works, recovery mode does not.
tried a number of solutions, including the Kies thing, said that my device was not supported. also tried flashing OA6 stock firmware i believe? not too familiar w the shorthand, just got this phone yesterday. i upgraded the phone when i got it so i am 99% sure it's on 5.0, and i read that this error can be received by trying to downgrade back to an earlier android version / firmware, but as far as i know i've been trying to flash the stock 5.0 firmware. whenever i tried Odin'ing the firmware, i get a fused 2 > binary 1 error. i am downloading earlier firmwares to try to Odin those and see if it helps but I'm really at a loss here. i read that as long as download mode still works there is hope left for me and I'm hoping that's true. please help me at all if you can.
markgnarza said:
hi all,
sprint samsung galaxy s5, SM-G900P user. turn on phone, get a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." error. here's what the rest of the screen says:
PRODUCT NAME: SM-G900P
CURRENT BINARY: Custom
CURRENT SYSTEM: Custom
REACTIVATION LOCK (KK): OFF
KNOX WARRANTY VOID: 0xl (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
VOC START
this error came about as i was trying to install the custom ROM MOAR here. didnt know that 5.0 android version = having OA6 so i was trying to install that per the thread's instructions. so that messed up somehow and i get the above error. download mode works, recovery mode does not.
tried a number of solutions, including the Kies thing, said that my device was not supported. also tried flashing OA6 stock firmware i believe? not too familiar w the shorthand, just got this phone yesterday. i upgraded the phone when i got it so i am 99% sure it's on 5.0, and i read that this error can be received by trying to downgrade back to an earlier android version / firmware, but as far as i know i've been trying to flash the stock 5.0 firmware. whenever i tried Odin'ing the firmware, i get a fused 2 > binary 1 error. i am downloading earlier firmwares to try to Odin those and see if it helps but I'm really at a loss here. i read that as long as download mode still works there is hope left for me and I'm hoping that's true. please help me at all if you can.
Click to expand...
Click to collapse
I suspect your phone has been updated to the new build ending in OD3. What that means is that you can not downgrade the firmware. I have read of people successfully installing MOAR via custom recovery but there is no need to downgrade the firmware to OA6. If you can still get into Download Mode, you "may" be able to use Odin (not Kies) and install a custom recovery such as TWRP or Philz and immediately boot into in to Recovery. You will need to copy the MOAR installer to an extSD card prior to doing this. Make sure to read the OP's for both MOAR and the MOAR FAQ where you'll find links to everything you need.
Ramer said:
I suspect your phone has been updated to the new build ending in OD3. What that means is that you can not downgrade the firmware. I have read of people successfully installing MOAR via custom recovery but there is no need to downgrade the firmware to OA6. If you can still get into Download Mode, you "may" be able to use Odin (not Kies) and install a custom recovery such as TWRP or Philz and immediately boot into in to Recovery. You will need to copy the MOAR installer to an extSD card prior to doing this. Make sure to read the OP's for both MOAR and the MOAR FAQ where you'll find links to everything you need.
Click to expand...
Click to collapse
i flashed the latest version of TWWP and had auto-reboot enabled, and my phone booted into the stock ROM. do you think i should still try to install MOAR or just leave my phone alone? im not new to ROMs in general, i came from a heavily messed with S3, but this problem kinda freaked me out. also, my phone is indeed on OD3. thank you so much for your help!
edit: also, can i still install MOAR if i am on OD3?
markgnarza said:
i flashed the latest version of TWWP and had auto-reboot enabled, and my phone booted into the stock ROM. do you think i should still try to install MOAR or just leave my phone alone? im not new to ROMs in general, i came from a heavily messed with S3, but this problem kinda freaked me out. also, my phone is indeed on OD3. thank you so much for your help!
edit: also, can i still install MOAR if i am on OD3?
Click to expand...
Click to collapse
Yes you can, just don't try to download the bootloader. See if you can get into TWRP, it may have gotten over written by stock. If it did, use Odin to reinstall twrp but turn off auto reboot in Odin and immediately go into twrp manually. Make sure you have MOAR installer on your phone beforehand.
Ramer said:
Yes you can, just don't try to download the bootloader. See if you can get into TWRP, it may have gotten over written by stock. If it did, use Odin to reinstall twrp but turn off auto reboot in Odin and immediately go into twrp manually. Make sure you have MOAR installer on your phone beforehand.
Click to expand...
Click to collapse
got it working again. thank you so much!
This is my first switch from htc to a samsung device.
I have been with HTC for years and gotten used to the procedures on rooting and unlocking bootloarder before flashing recoveries and custom roms.
I newly got the galaxy s3 with the intention to root and flash on custom roms as I heard all samsung phones by default have their boot loader unlocked.
with my search to root my new s3 I discovered of the many variants and how verizon variant having 4.3 and 4.4 can't be bootloarder unlocked and as such limited to custom roms to flash.
Here's the confusion:
Going through settings and about, it states I have - GT-I9300, ANDROID 4.3, Baseband Version : I9300ZCUBMLI
And the boot loader information:
ODIN MODE
Product Name: SCH-1535
Custom Binary Download: Yes (1 counts)
current binary: custom
system status: none
Qualcomm secureboot: enable
warranty bit:1
bootloader RP swerv: 1
So, from the setting information one could conclude its the international version but when I rooted the phone with towel root (successful) , I tried flashing the latest twrp both variants , I got an error from the recovery. i was able to restore back my stock recovery from the backup.
WHAT CAN I DO?
CAN I DOWNGRADE TO 4.1.2?
WHICH OF THE S3 VARIANTS IS THIS ?
Thanks to every replies in advance
ehis3emma said:
This is my first switch from htc to a samsung device.
I have been with HTC for years and gotten used to the procedures on rooting and unlocking bootloarder before flashing recoveries and custom roms.
I newly got the galaxy s3 with the intention to root and flash on custom roms as I heard all samsung phones by default have their boot loader unlocked.
with my search to root my new s3 I discovered of the many variants and how verizon variant having 4.3 and 4.4 can't be bootloarder unlocked and as such limited to custom roms to flash.
Here's the confusion:
Going through settings and about, it states I have - GT-I9300, ANDROID 4.3, Baseband Version : I9300ZCUBMLI
And the boot loader information:
ODIN MODE
Product Name: SCH-1535
Custom Binary Download: Yes (1 counts)
current binary: custom
system status: none
Qualcomm secureboot: enable
warranty bit:1
bootloader RP swerv: 1
So, from the setting information one could conclude its the international version but when I rooted the phone with towel root (successful) , I tried flashing the latest twrp both variants , I got an error from the recovery. i was able to restore back my stock recovery from the backup.
WHAT CAN I DO?
CAN I DOWNGRADE TO 4.1.2?
WHICH OF THE S3 VARIANTS IS THIS ?
Thanks to every replies in advance
Click to expand...
Click to collapse
You have a VZW S3. It's the Verizon variant. Not all Samsung devices have unlocked bootloaders. With Verizon they do almost whatever they can to lock it down.
If you took the NC1 update you would of been on a locked bootloader. But you still may be on a locked bootloader. I'm truly not sure. Check out this thread for more information
http://forum.xda-developers.com/showthread.php?t=2639337
Nexus 6 via Pure Nexus
thanks for your reply
I've been reading several thread on this for hope . I dont wish to upgrade to 4.4 2, that will mean total lock up .
Then I found this link, it talks about a downgrade of 4.3 to 4.1.2
http://forum.xda-developers.com/gal.../downgrade-4-3-to-4-1-2-unlock-t3142876/page4
ehis3emma said:
This is my first switch from htc to a samsung device.
I have been with HTC for years and gotten used to the procedures on rooting and unlocking bootloarder before flashing recoveries and custom roms.
I newly got the galaxy s3 with the intention to root and flash on custom roms as I heard all samsung phones by default have their boot loader unlocked.
with my search to root my new s3 I discovered of the many variants and how verizon variant having 4.3 and 4.4 can't be bootloarder unlocked and as such limited to custom roms to flash.
Here's the confusion:
Going through settings and about, it states I have - GT-I9300, ANDROID 4.3, Baseband Version : I9300ZCUBMLI
And the boot loader information:
ODIN MODE
Product Name: SCH-1535
Custom Binary Download: Yes (1 counts)
current binary: custom
system status: none
Qualcomm secureboot: enable
warranty bit:1
bootloader RP swerv: 1
So, from the setting information one could conclude its the international version but when I rooted the phone with towel root (successful) , I tried flashing the latest twrp both variants , I got an error from the recovery. i was able to restore back my stock recovery from the backup.
WHAT CAN I DO?
CAN I DOWNGRADE TO 4.1.2?
WHICH OF THE S3 VARIANTS IS THIS ?
Thanks to every replies in advance
Click to expand...
Click to collapse
Your phone is giving conflicting information, I have no idea what you have.
If it's possible, take the battery out and take a picture of the sticker and post it.
Verizon phone also has a Verizon marking on the back of it. An sch-1535 is not a Verizon phone. An SCH-I535 is. It's possible you have a Chinese knockoff device. In which case you may need different firmware to fix your device. Flashing wrong firmware could break your phone completely.
Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)
Hi, I'm trying to downgrade from 7.0 to 6.0.1. Odin keeps failing.
When Odin fails (after NAND write start), I see an error pop up on the Download mode screen (red letters):
SW REV. CHECK FAIL. DEVICE: 6, BINARY: 5
Tried different versions of Odin, and made sure I had a good copy of the right version of firmware from Sammobile.
Any idea if it's possible? Is there another way to do this besides Odin? Phone is not rooted, stock, Knox intact.
I've been off Samsung for a few years, and my memory is spotty... but would it help if I installed a Recovery, then flashed a custom 6.0.1 rom? Or is that also a problem?
Thanks for any help!
Mike
resarfekim said:
Hi, I'm trying to downgrade from 7.0 to 6.0.1. Odin keeps failing.
When Odin fails (after NAND write start), I see an error pop up on the Download mode screen (red letters):
SW REV. CHECK FAIL. DEVICE: 6, BINARY: 5
Tried different versions of Odin, and made sure I had a good copy of the right version of firmware from Sammobile.
Any idea if it's possible? Is there another way to do this besides Odin? Phone is not rooted, stock, Knox intact.
I've been off Samsung for a few years, and my memory is spotty... but would it help if I installed a Recovery, then flashed a custom 6.0.1 rom? Or is that also a problem?
Thanks for any help!
Mike
Click to expand...
Click to collapse
the failure message is saying that your phone has a version 6 bootloader and youre trying to flash a version 5 bootloader. you cant downgrade from 6 to 5. sorry mate, nothin' doin'
Hello I have A41 (SM-A415F) with last Android 12.
I like to downgrade to android 10.
I tried Odin but I get error SW rev check fail (boot) fused:2 -> binary: 2
and the phone briched until I restore last FW with Odin.
I unlocked boot loader but the same appened and when I replace last firmware boot loader locks again
Anyone can help?
Thanks in advance
Anyone can help? I unlock bootloader but is not still possible flash old firmware (I think due to fused sw version)
Are any custom rom available for this device? Or at least I can installa another offiial rom with less blootware?
Read to remove these bloatwares
: https://us.norton.com/blog/online-scams/bloatware#
There is no custom rom for you device to date. Please, read the post above.
The problem is that you are using an old firmware. Your phone is up-to-date. I think the only solution is to unistall the bloatwares.