Hello,
I am an owner of an eStar (MID9768) intel Crystal clearview 9,7'' Model number: (OTA test) , Android version: 4.2.2 , IAFW version: 0002.0003, FW version: V1.01_v1 , Kernel version: 3.4.43-00010g26cfc46-dirty.
As I did my research I came up that my device is identical with Onda V975i, so I have a question, can I root it by using root procedures for Onda? Also I used Kingoroot and iroot but nothing happened cause I dont have the drivers for the android connection with desktop. With ADB drivers also nothing new, the android driver remains with the exclamation mark!
I am almost sure that my device is identical with Onda V975i cause all the specs are the same, also the case for Onda is fitted to my eStar perfectly!
After the root I want to try dual boot it with Linux or only Linux as OS.
Thank you for you time.
Hi there,
I'm sorry but I can't find anything related to your question/device but you can try some methods from here: How to Root Any Device
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
Ok. I bought what was advertised as 7" Allwinner q88 A13 mid tablet pc's. I believe these are single core and single cam.
Out of 3, 2 of them are bricked on the Android logo screen. I do have one that is still properly functioning. I've been wanting to learn more about software developement, rooting, adb, and flashing tablets.
So, is there a way I can copy the software of the working tablet and flash it onto the other 2 bricked tablets? I'm a novice and want to LEARN! Can anybody help me out? Any resources would be helpful. Or maybe a coach?
This is what the working tablet shows About Tablet:
Model number: ococci_MID
Android version: 4.2.2
Firmware version: v1.2.2
Kernel version: 3.0.8+
[email protected] #23
Build number: nuclear_ococci-eng 4.2.2 JDQ39 20130709 test-keys
Hi,
I'm sorry but I don't find anything related to your device, so you must start asking in one of this Q&A forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or
> General discussion > Questions and Answers
Good luck
Thread closed, thank you.
I have a LandRover Discovery V8 phone with a jellybean OS, that i would like to upgrade to KitKat if possible.
CPU: MT6582 Qual-core.
Model: V8W05
Version: 4.2.2
Kernel version: 3.4.5
Build # : V8W05 201 40919-132057
Can anyone point me to the right thread to root, and flash the rom for this type of phone please.
Hi,
Unfortunately my reply is the same as your last thread.... I can't find anything relevant on XDA for your device. As I mentioned last time, here is where you can ask about anything for your device,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
I rooted my S4 mini clone but have failed to flash a cwm recovery successfully despite all the provided solutions on the site including this one http://forum.xda-developers.com/showthread.php?t=2379412
Can someone help me?
Phone brand Alps
Model GT I9190
Kernel version: 3.4.5 [email protected]
Build no. : JDQ39.I9190XXUAMDE
MTK BUILD: ALPS.JB3.MP.V1.8
Android version : 4.2.2
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
You can try some recovery from official S4 mini I9190 but i'm afraid you will soft brick your device.
Good luck
Good evening Guys, i have a problem.
Here is the situation, i bought a mobile custom version Lenovo S660w from aliexpress. This cellphone it supose that has mtk6592 on it, but after a check with Droidtools i have found that the china guy, scum on me... He sold me mtk6572( dual core) with fake firmware, so every cpu-z like tool shows that the mobo has mtk6592(octacore) in it... ... The mobile is to slow.. So I thought to downgrade to another android version (now it has 4.4.3 i think). What can i do. What is your opinion...
Kernel version: [email protected]#1
Plz Help me
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello everyone!
This will be a bit long but here is my problem.
I got aAkai Tab-7800 that was dropped by a kid when he was playing with it. Since than it won't go past the android logo when booting. I took off only the backcover but I didn't see any damage there.
I tried to go into the recovery menu but when I try to start the tablet with the volume + and power button it won't start.
Tablet specs:
-Android 4.0.4
-Allwinner A13
- 512 MB RAM
Since my Concorde tablet also has an Allwinner cpu I tried PhoenixSuit because thats what I used to flash mine.
The tablet is still "alive" since it can communicate with the pc and got these info from it:
- Model: nuclear-evb
- Rom version: nuclear_evb-eng 4.0.4 IMM76D 20130115 test-keys
- Android version: 4.0.4
- Chip type: nuclear
- Kernel: Linux version 3.0.8+ ([email protected]) (gcc version 4.5.1 (Sourcery G++ Lite 2010.90-50)
When I tried to use the "recovery mode" in Phoenix, the tablet only restarted.
Now my question is what do you suggest? Shall I try to flash a new rom onto it and if yes which one? Or is there something else I could try?
Thank you for your answares in advance.
Some update on this. I could flash this rom that I found on the tablet. (A13 Q8 v6.6 OCOCCI nuclear_evb-eng 4.0.4 IMM76D)
While first I had a bootstuck now I have a bootloop...
Can someone suggest a rom?
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in one of the links bellow for more answers from the experts:
[Ask Any Question][Newbie Friendly]
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
R_a_z_v_a_n said:
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in one of the links bellow for more answers from the experts:
[Ask Any Question][Newbie Friendly]
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Click to expand...
Click to collapse
Thank you for the answer. I only now got time to reply. I actually solved my problem.
I tried out many roms, most of them didn't boot, one cyanogen booted but the touchscreen didn't work. Finally I found this http://forum.xda-developers.com/showthread.php?t=2312731 and one of the TS driver worked. Then I only had the problem of the camera but I could solve that too with these files http://forum.xda-developers.com/showpost.php?p=55727899&postcount=109 . So for now it looks like everything works fine.
So in short for those who may have problem with an Akai Tab-7800:
- Flash FaaastJB v2.5 on the tablet.
- use these moduls for TS "ssd253x-ts.ko+dmard06.ko"
- use these files from the post for camera: http://forum.xda-developers.com/showpost.php?p=55727899&postcount=109