Database Info

[ROM][PORT] ROM for Karbonn A12+

[Custom Rom] ROM for Karbonn A12+
How To Flash :
( You Can Take CMW Backup for Revert back to your old system )
1) Download .zip File
2) Put into ROOT OF YOUR SD CARD
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Intall From SD and Select file And Click YES
9) Select .zip. And Select YES
10) Reboot
11) Congrats
Features-
->Zipaligned
-> Pre-Rooted
-> BusyBox Support
-> New Boot Animation
-> Faster WiFi Connect and Internet Access Mod
-> New Processing and RAM Management Files
-> Fully Deodexed
-> Battery Tweaks
-> Kernel Tweaks
-> NO TWEAKS TO UI.
-> Free RAM generally above 150mb
-> /data/app functionality
Credits-
->dsixda for his android kitchen
Download link-
http://www.mediafire.com/download/s0sq68fonnppqsx/hct72_wet_jb3_signed_123113_084019.zip
Lewa OS (Ported)
its a port from xolo a500s and not tested by me because i lost my karbonn a12+ few days back
Download Link-
http://www.mediafire.com/download/qnp4o08fac9uaqt/LEWA_signed_020114_111626.zip
DONATE ME TO BUY KARBONN A12+ AND SUPPORT MY WORK
Screenshots-

Thanks for your hard work. Any improvements on the GPS?
Can you please upload some screenshots as well?

nightcrawler218 said:
Thanks for your hard work. Any improvements on the GPS?
Can you please upload some screenshots as well?
Click to expand...
Click to collapse
Yes!! i also want screenshots.. but i thinks there isn't any change in UI..
this Rom is only DeoDexed, Zipalign, etc..

suthar88.sunil said:
Yes!! i also want screenshots.. but i thinks there isn't any change in UI..
this Rom is only DeoDexed, Zipalign, etc..
Click to expand...
Click to collapse
yes there is no change in ui... but try installing lewa and see its working or not for further improvement

suthar88.sunil said:
Yes!! i also want screenshots.. but i thinks there isn't any change in UI..
this Rom is only DeoDexed, Zipalign, etc..
Click to expand...
Click to collapse
Okay! Bro.

[ROMS][Root][Mods] QMobile i9

Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting​
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha​

Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4​

Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha​

Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186​

Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman​

Custom ROMs
Reserved For More ROMs

KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link

Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app

Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow

qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app

malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2

QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492

For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui

qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928

To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools

Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!

Its already on post

AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app

It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9

I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse

XPERIA Z3 OS 4.4.2 MOD for MicroMaX Canvas 2+ A110Q

XPERIA Z3 OS 4.4.2 MOD for MicroMaX Canvas 2+ A110Q
Orignal Thread :- http://4pda.ru/forum/index.php?showtopic=577004&st=1380#entry34707052
SYSTEM PARTITION NEEDED
-Latest Android 4.4.2
-Latest Android 4.4.2 Lenovo Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-KK LockScreen
-KK Dialer
-KK Contacts
-KK Messages
And Many More.........
Bugs :
Tell if you see any....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** Process To flash Patch **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
For More Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : DinasNet from 4pda, Besik_13 xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
Happy Diwali and this is your DIWALI BONUS
Downloads
Mirror1
Mirror2
For root Problem Flash this
boot_updateV3(PERFORMANCE, BATTERY)
Tip :- Register free account on UsersFiles then activate then login with your ID and Pass then download. There is no download limit

[Q&A] [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }

Q&A for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

not working..after imstalling it reboot to recovery
not working..after imstalling it reboot to recovery..help

Follow the instructions carefully
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
1) Download the zip file from the download link provided below...
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
5) Go to recovery mod and firstly take the nandroid backup and reboot...
6) Again go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone ....now fly with sparrow
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
Do not flash the addon zip just after installing ROM .... A reboot is necessory after installing ROM and after a reboot then flash addon zip.. Also don't do any factory reset after installing both rom and addon zip.
And after this if again any problem occur then do inform me...

a complaint
My handset has been appearing white and then booting often, but it is not booting properly and it becoming white and then again booting as ninja..I don't know what to do...please help me Bro's....I can't use my headset ninja a89..;reply me soon... XDAXda
Finally sorry for my English...

I think you don't followed the instructions to install flying sparrow carefully... Please read the instructions first and strictly follow them.. And also use the cautions..
Also report me if it work

USB Mass storage not working
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..

solution
Karthik Bala said:
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
Click to expand...
Click to collapse
Actually flying sparrow is completely bugless but if you are facing problem of usb ,do the following things for solution. Firstly install the rom zip only don't flash the addon zip and reboot .Then try to connect your phone to your computer. Then usb will work.. And after this try ,go to recovery mode and flash the addon zip.. And reboot. Don't do factory reset.. Now usb will work.. If any other problem occurs report me

Not Working in my A89
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832

solution
vsmv said:
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
Click to expand...
Click to collapse
Installation is abroted because you are installing the wrong zip file...
You need to firstly extract the downloaded zip file and you will find the ROM zip inside it
Kindly follow the steps...
1) Download the zip file
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
6) Go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone

Need Help
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast

Abhay S said:
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Click to expand...
Click to collapse
Everything is ok but between steps 1 and 2 you forget to extract zip file... After extraction you will find rom zip and addon zip.. You have to put these two zip files in your sdcard...

install fly sparrow in micromax a89 ninja
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast

Installation steps updated
Steps for installing rom properly are updated now and explained properly for cwm and twrp users individually in the discussion page.....:d

regarding xblast tools
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you

Solution
Pbm12345 said:
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Click to expand...
Click to collapse
For changing the background wallpapers of apps you need to decompile them.. There are many tutorials available on xda ,kindly follow them..
Quick settings will not work work on flying sparrow as quick setting will only work for jb.. You can try to install them but i know that this feature will not work for an ics based rom.. Proceed to post no.2 in the discussion thread of flying sparrow for installing xposed framework.. Also i have provided the list features of xblast tools which are tested and work perfectly on flying sparrow.. If follow the procedure in post 2 correctly you will successfully work with exthemer... You need to select exthemer in the module list of xposed installer.. And reboot.. I hope this will help you and give answers to you your questions... Also participate in poll in flying sparrow thread...

Error
Hey,there is problm after reboot......
it does not go further after boot animation..
plz help me out....

How to remove transparency in each view
Hi Preet,
I have installed your ROM, on MMX A89 just few minutes before, and it looks nice.
I have some questions and main is I DO NOT want Transparent background in any case.
How do I achieve that in your ROM? I do not like transparent background.
Please help me for this.
Note: I will wait for 1 day otherwise I will restore my old backup (ICS 4.0.4 company look). And what you had said about battery saver? What bug it has for battery?
Thanks in advance.

[MODs][GUIDES][CM12][CM12.1]

MODS FOR CM12 AND CM12.1 ROMS
TESTED ON WIKO RAINBOW
WARNING:
BEFORE PROCEEDING, MAKE A NANDROID BACKUP OF THE CURRENT ROM
I WILL NOT BE RESPONSIBLE FOR ANY KIND OF BRICK OR DAMAGE
ANDROID M LOCKSCREEN
INSTRUCTION
1-DOWNLOAD THE ANDROID M LOCKSCREEN.ZIP
2-BOOT IN TO THE RECOVERY AND FLASH THE ZIP
3-REBOOT
HOW TO CHANGE LOCKSCREEN WALLPAPER
INSTRUCTION
1- DOWNLOAD THE APP AND CHANGE THE WALLPAPER
OR
IF THE ABOVE METHOD DOESN'T WORK, TRY THIS
THINGS YOU'LL NEED:
1-ROOT ACCESS
2. A ROOT FILE EXPLORER LIKE ES FILE EXPLORER ETC
STEPS:
1-Download/place the wallpaper you need in your internal/external storage and remember it's location.
2-Download, install and open a root file browser. (ES File Explorer recommended)
3-Grant the file explorer root access.
4-Go into the root directory and then go to data/system/users/0.
5-Here, rename the "keyguard_wallpaper" to "keyguard_wallpaperOLD" to keep it as a backup.
6-Now navigate to where you saved your new wallpaper, and rename it to "keyguard_wallpaper" REMEMBER TO REMOVE THE FILE EXTENSION.
7-Lock the phone now, and enjoy your new wallpaper.
HOW TO GET NETWORK TRAFFIC ON STATUS BAR WITHOUT GBOX OR ANY APP
INSTRUCTIONS
1-DOWNLOAD Network_traffic_CM12.1.zip
2-BOOT TO RECOVERY AND FLASH THE ZIP
3-REBOOT
4-GO TO SETTINGS/STATUS BAR FOR THE NETWORK TRAFFIC OPTION
MUSIC MODS FOR CM12 AND CM12.1
1. Xperia Walkman(VIPER FX)
STEPS:
-FLASH IN RECOVERY
2. Xperia Walkman Material Design
STEPS:
-INSTALL AS NORMAL APK
3.XTREMEMusic STABLE V4.0.2
STEPS:
-FLASH IN RECOVERY
OR TRY
4.New XTREMEMusic v4.2 BETA 1!!
STEPS:
-FLASH IN RECOVERY
5.DOLBY ATMOS
STEPS:
-FLASH IN RECOVERY
6.XTREME VIDEO
STEPS:
-FLASH IN RECOVERY
HOW TO INCREASE WIFI SPEED(DHCP)
INSTRUCTIONS
1-DONWLOAD THE DHCPv2.TAR
2-EXTRACT
3-OPEN THE FOLDER AND COPY THE FILE AND REPLACE
your system/bin/dhcpcd with this one, and it should be way faster
HOW TO ENABLE QUICKBOOT
1. Download QuickBoot.zip
2. Flash the downloaded zip file from the recovery
3. Enable QuickBoot from Developers options
4.Want to try, just power off and power on
ENJOY THE MODS
NOTE: I DIDN'T DEVELOPED ANY OF THE ABOVE MODS I M JUST SHARING
HIT THANKS BUTTON IF I HELPED U AND IF U R DOWNLOADING THE MODS​

Any Mod For Battery Tweak ...?

Will add soon if i find one
Sent from my rainbow using Tapatalk

Will these mods work on all phones?

sharezaman said:
Will these mods work on all phones?
Click to expand...
Click to collapse
I also want to know.

Sandeep5303 said:
Will add soon if i find one
Sent from my rainbow using Tapatalk
Click to expand...
Click to collapse
Found any Yet??

dolby atmos has stopped in xperia p cm12.1. any solutions?

Any Tweak to get Clear Ram option in CM 12.1 Mod. Which we used to have in vibe default Lenovo K3 Note.

shafyqsod said:
dolby atmos has stopped in xperia p cm12.1. any solutions?
Click to expand...
Click to collapse
Try new version or any other mod
Sent from my Micromax E481 using XDA-Developers mobile app

anish274 said:
Any Tweak to get Clear Ram option in CM 12.1 Mod. Which we used to have in vibe default Lenovo K3 Note.
Click to expand...
Click to collapse
Screenshot please!!
Sent from my Micromax E481 using XDA-Developers mobile app