Database Info

ROOTING AND ONLY RUNNING XPOSED and OTA

Guys, I need some advice.
If I'm rooted and I solely depend on Xposed for tweaks (that means I don't modify system files), will my moto g be fit for OTA updates? like I read here somewhere that if you're rooted and no system files were tweaked, OTA updates won't be a problem.
Thank you so much. New XT1033 Moto G owner here running Stock 4.4.2 rom. Still on the fence when it comes to rooting tbh. Also, I haven't been able to find changelogs for the 4.4.4 update. Thank you!

@OldYellowBricks
The short answer
If you have stock recovery and have not modified any system files, you will be able to OTA without a problem. Did it myself from 4.4.2 to 4.4.3.
The long answer
Here is how updating works:
The updater has a list of files that are going to be modified by the update. It first calculates the checksum of every file that is going to be modified and compares it to the cheksum it has on a list. If there is a checksum mismatch, the update process is aborted. If all the checksums agree, the updater starts patching the files.
Now, since the updater doesn´t expect you to have xposed and supersu on your system partition, it doesn´t look for them and it does not care about them - it just patches the files on the list. That´s all.

knizmi said:
@OldYellowBricks
The short answer
If you have stock recovery and have not modified any system files, you will be able to OTA without a problem. Did it myself from 4.4.2 to 4.4.3.
The long answer
Here is how updating works:
The updater has a list of files that are going to be modified by the update. It first calculates the checksum of every file that is going to be modified and compares it to the cheksum it has on a list. If there is a checksum mismatch, the update process is aborted. If all the checksums agree, the updater starts patching the files.
Now, since the updater doesn´t expect you to have xposed and supersu on your system partition, it doesn´t look for them and it does not care about them - it just patches the files on the list. That´s all.
Click to expand...
Click to collapse
Okay now I get! Thank you so much. I would like to keep to stock ROM andbrun some xposed modules for stability and to be honest, I'm pretty reluctantbto flash ROMs on this dual sim phone cause support is pretty wonky from what I've read (no disrespect to the developers!)

Outdated MOFO IMG Computerfreek274_1.6 ,Pon-3V4A,PowerSave_11/7/15

With Sunshine unlocking droid Turbo Bootloader I will be moving on to making ROM's not just an img. please see my Forum on XDA here and my Website Computerfreek.com Here for more info.
I will continue to do MOFO support for the next month or so as users make the switch.
Computerfreek274_Turbo_lollipop (SU4TL-44)​
Also On my website Computerfreek.com Now has updated help and support how to setup stuff like adaway,Boot anamation, Dpi and more. Also I will be posting Pre-Released images there days be for there on XDA. There will also be images some custom images that will not ever be listed on here on XDA for I will not support them. So please check out the site it is still a work in progress but it is getting there. As of right now I did not get custom IMG listed and the newest ver is still 1.6 and it is listed below.
This Firmware upgrade to 5.1 SU4TL-44 from 4.4.4! VIA Mofo.
If you took the OTA 5.1 update you out of luck as you where told not to on here over and over. Go check out sunshine root maybe coming soon for locked 5.1 users.
If this software somehow kills your phone I am not to be held liable.
PLEASE BACKUP YOUR DATA 1st For the best speed and no bugs if you are coming from 4.4.4 for the 1st time I recommend that you backup your photos,music and other data. and when you get to step 3 wipe Data and cache. It is not a must but for me to give you support this is a must.​
Thanks to @firstEncounter for his great post and images. Thank you @mattlgroff for his help and everyone who sent me links to the OTA and Full ver.
Thanks to http://motofirmware.center/files/ for hosting stock lollipop IMG's so I an update missing or outdated system files I had.
Big Thanks for PON-3 Audio mod from @mrchezco1995 and his forum is here
Please support better battery stats and give a big thanks over on there forum here. The better battery stats companion app installed in 1.4 will only work with paid ver of bbs from google play.
Thank you guys so much.
Features:
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - Custom version from DPI dpi higher resolution to Custom fonts
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional adblocking! - Adblocking via AdAway that can be toggled on and off.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android which comes bundled in this system image.
Enabled for XPOSED Updated to newest ver. - This system image has been enabled for the XPOSED framework as well as includes BusyBox.
For better support I have removed old versions on here my focus is to have better support for all of you starting from 1.5+
Please Read! If your not on Kernel Version 3.10.40-perf-g90ddf4a Sept 1st 2015 Please Download and flash all .IMG files in this zip here. To find the kernel build go to settings > About phone. Most of you guys will need to update!
Computerfreek274_TurboPop_1.6 Update. 11/07/2015
Now With Turbo 2 Command Center. Screenshot
Download 1.6 Here
Change Log.
Updated .img files in 1..6 No need to download Img pack when upgrading from KK or to update your kernel,modem,etc... all files are updated 1.6 Zip.
Cleaned up some more junk from system
Updated some apps.
Removed music2 aka google music.
Samsung Sans Font IMg's has the IOS9 emojis.
Turbo 2 Command Center​
Download 1.5B Here Updated 10/16/2015 Base on SU4TL-44
Download 1.5 Here 10/5/2015
Custom fonts in 1.4 I will update 1.5 as needed.​1.4 Download Here.
All Files and IMG's files that are needed to install my IMG are Zipped with all my system images from ver 1.3 and up Just download 1.4 or 1.3 and unzip open the help file and do a step by step install.
Please Read 09/12/2015 For Android Pay support and Setup please see Post #3 ​
You can still download 1.3 and 1.3A here.
[/URL].
1.5B Change Log 10/16/2015.
Updated to SU4TL-44
Updated Xposed
Boosted overall audio and mixer profile updated
Fix Pon-3 audio buffer for large audio high bit rate files buffer from 32m to 48m
Few other tweaks also see 1.5 for more info. This has all the tweaks from 1.5 and 1.5 is the best battery and fast running ver to date.
​
1.5 Change Log 10/5/2015
Removed more junk like maps and stuff as you have updated ones from market.
Added for more Tweaks for faster GPU and CPU and more memory.
In call VOL boosted default was max 3 now max 10.
Better GPS.
Battery Seems much better with memory fixes.​
1.4 Change Log 6/12/2015
Android Pay Support Please see post #3 For more info.
Custom Fonts There will be 1.4 img with custom fonts. More to come check one of the last post for more info.
Some Of the changes listed here is from 1.3A
PowerSave Is in all from 1.3A and up.
Removed some more bloat.
SuperSU is the stable ver.
Xposed to newest ver Please uninstall your old xposed.apk be for you flash.
HDR Camera setting is fixed as of 1.3A
Updated some system files.
Tweaked GPS a bit for faster lock.
PON-3 updated
Fixed audio profiles for PON-3 to match are turbo for a more stable PON-3 audio.
Updated Mixer Profiles for better audio.
mixer_paths updated louder audio as we had in my ver of KK. 09/02/2015 I had to make a new one for Lollipop as the old mods did not work.
updated to work better with the turbo Pon-3.
There is now a set of 1.4 Pure/MAX IMG's also for none Verizon users only.
​
More help and support can be found on my website at Computerfreek.com for full install and updates Or read below.
How to install
See Post number 2. http://forum.xda-developers.com/showpost.php?p=61636340&postcount=2.
To setup DPI,Adaway and more.
To install system img via mofo see post 2.
Setup Adaway Install AdAway from Play Store. Run AdAway (don't download hosts files yet) and go to settings - preferences. Check 'allow redirections' and under 'target hosts file' select '/data/host Then go back and hit update host files.
Xposed In Pre-installed and setup just install the mods you like to use.
On Pon-3 V4A Open Pon 3 and check the sound devices you like to enable.
Setting up an custom boot animation place bootanimation.zip under /data/local/moodle/bootanimation.zip for more info or watch this small video on how to. https://www.dropbox.com/s/lom6zduant...rding.mp4?dl=0
For 493 Builds to fix the ambient display being off set you must install xposed MOD app settings found here or download it from inside of xposed. and set moto diplay to 640 DPI. If you need more help check the forums here.​

Flashing from KitKat to Lollipop
This is a nice well written guide by @Purpeltendire Thank you @Purpeltendire Thank you for this great guide.
If you are new or upgrading and need more help I updated help and info on my website also at computerfreek.com
Steps to flash from KitKat to Lollipop - This assumes that you're currently using a rooted KitKat image already, and have used mofo to get root.
BACK UP ANY DATA YOU DO NOT WISH TO LOSE.
YOU ARE ULTIMATELY RESPONSIBLE FOR ANY LOST FILES OR DEVICE PROBLEMS.
Make sure you have a good hour or two set aside, at the minimum. It’s probably not a great idea to try this right before work or class.
Install mofo, ADB, and fastboot on your computer if you haven't already. On Windows, I like using this for ADB/fastboot.
Download the image of your choice.
Download 5.1_images.zip. Extract the files, and put them into the same directory as fastboot. Next, boot into your phone's bootloader (turn the phone on by holding power and volume down), and flash each file seperately using fastboot:[/FONT]
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot erase ddr
Now open mofo_gui.bat, and flash the system image you downloaded:
Code:
mofo flash Your_imagename_here.img
Once that finishes, you want to try to boot the phone. Select Boot to System from the bootloader and then go grab a snack - chances are, it will sit at the Motorola boot screen for some time. After about five minutes, press and hold power to turn the phone off.
Next, boot into the bootloader again and select Recovery. You will likely get a "Dead Android" screen with "No Command." To bypass this, hold power and tap volume up (if that method does not work after a few tries, hold volume up and press power).
Now that you're in recovery, you're wiping both data (factory reset) and cache. Wipe cache first - this may take a very long time (20-30 minutes), especially if you've never done it before. Wipe data/factory reset second. If you're feeling paranoid, wipe everything again.
From recovery, boot to the bootloader. From bootloader, boot to system. This first boot might take some time as well.
Assuming all went well, you should see a Lollipop setup screen within 10-15 minutes. Congratulations!
Remember that your device is now in “like new and improved” mode. You’ll need to restore your apps and settings from wherever you backed them up to, and you'll still need to get the APKs for Xposed and AdAway. Again, nobody else is responsible for any of your lost data.
[FONT=Arial[/FONT]
For more help see Computerfreek.com

Android Pay Setup and Support. 9/28/2015
Update The updated android pay from google market is no longer working with root so if you flash back to an rooted img after setting up this one android pay will stop working.
9/30/2015
For Working android play and info please go to this forum I have made an IMG with tweaks and more here with working android pay.

Tomsgt said:
just talked with the dev behind moforoot and he said that mofo was patched in android 5.1 but he may look into other ways to get around it.
Click to expand...
Click to collapse
This was stated in another thread. I don't know if you heard, but I'm holding on that there's still hope. Is there still a possibility to be able to make a rooted image? I'm really hoping that we'll be able to have root with lollipop, but at the same time, I don't want you to put in all this time and effort for nothing.
Sent from my XT1254 using XDA Free mobile app

There's a lot of places with the ota, try one of them

Jaocagomez said:
There's a lot of places with the ota, try one of them
Click to expand...
Click to collapse
he needs the firmware img's

Michaelmansour1997 said:
he needs the firmware img's
Click to expand...
Click to collapse
Those will be released in the following days

Jaocagomez said:
Those will be released in the following days
Click to expand...
Click to collapse
noooo i need them today to fix my paperweight

Ahhhhh! I can barely wait!

Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /

MoPhoMike said:
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
Click to expand...
Click to collapse
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.

Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883

TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
Yes but I like to get ahold of a system dump. I been working on the ota today.

Pretty stoked!
Sent from my XT1254 using Tapatalk

siegesoldier said:
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Click to expand...
Click to collapse
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.

Want to make sure so if you have root via MOFRO then you should wait and not install the OTA and wait for new System Image from the Freek!!!

computerfreek274 said:
Yes but I like to get ahold of a system dump. I been working on the ota today.
Click to expand...
Click to collapse
Gotcha. Well unless someone has had luck with Kingroot (early reports said that it didn't work), I don't think that will be possible.
EDIT: Nevermind. It's totally possible. I'll try to track down someone who can get it to you.

computerfreek274 said:
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Click to expand...
Click to collapse
Pulling /system with adb should be easy and noob-proof.
Sent from my LG-E400 using XDA Free mobile app

TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
there are no system img's in the ota, its a flashable zip not an xml

Is this what we're looking for?
http://forum.xda-developers.com/droid-turbo/general/lollipop-5-1-coming-23-11-38-t3146663/page4
I have the restore firmware ... where should I host it?
VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/general/droid-turbo-lolipop-firmware-t3147979

[ROM][SCREENSHOTS][ACER ICONIA B1 SERIES][5.0.1]Lollipop ROM For Acer Iconia B1

Hey guys.
I'm currently working on a Lollipop ROM For 7" MTK Acer Tablets. (I'm currently using the B1-720 as the 'Testing Tablet.')
FEATURES...
-Being based off Xperia Z4 Tablet LOLLIPOP
-Z3+ Boot Animation
-Lollipop UI (with its own unique touches.)
-Lots of Lollipop Animations. (Ripple Effect, App open Animations, Listview Animations etc.)
-Animations and Apps ported from other ROMS.
-...and much more.
I was going to make a Marshmallow 6.0 ROM, but the Project fell right on its face. Lollipop is much easier to work on.
And BTW I'm sorry for posting this into on the General Forum section. Since there isn't an Acer Iconia B1 Forum, I had to post it here. Any quote movements won't bug me at all!
Compatibility list:
Fully Working Devices:
Acer Iconia B1-720
Devices that may use this ROM but DOESN'T support the build.prop and SystemUI.apk in the ROM.
Acer Iconia B1-730/HD
Acer Iconia b1-750
Acer Iconia B1-770
Acer Iconia B1-710
Other Devices that MAY work with this ROM.
Acer Iconia A-Series Tablets
Other MTK based Acer Tablets
Other Android phones running Android Kitkat
Oh Yeah and If you want to see Progress videos of the Early ROM in action on the B1-720, then click on this link: https://www.youtube.com/playlist?list=PL2WiOdCyolCAua6FClkgBrO3UlDZYnW2s
UPDATE 12 MARCH 2016!!!
Hey guys. I've got great news. The ROM is done and ready to be downloaded! Remember: THIS IS NOT A FLASHABLE .ZIP ROM PLEASE DON'T TRY TO FLASH THIS VIA CWM, TWRP, OR ANY OTHER RECOVERY! Instead, extract the zip file folders and files using a trusted app such as Root Explorer and follow the steps giving in the _READ_THIS_TEXT_FILE!.txt file given in the ROM.
REMEMBER: this is a 80% DIY ROM with giving files and Apps to be manually installed by YOU! Don't try to flash this via CWM!
Steps:
1: Extract the zip file with Root Explorer.
2: Open the _READ_THIS_TEXT_FILE!.txt file and read for more steps.
3: Enjoy!
All apps and files given in this ROM is owned by their respectful owners!
Enjoy!
DOWNLOAD LINK
https://www.dropbox.com/s/589mm9hroosq4ox/LOLLIPOP_5.0.1_ROM_ACER_ICONIA_B1_SERIES.zip?dl=0

Would this work on a B1-730?

ctyndall77 said:
Would this work on a B1-730?
Click to expand...
Click to collapse
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work prefectly. Thanks! ?

Brandon Nel said:
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work perfectly. Thanks!
Click to expand...
Click to collapse
What exactly does the build.prop file do?

ctyndall77 said:
What exactly does the build.prop file do?
Click to expand...
Click to collapse
Changes RAM limit, Android version in settings, ROM name, Pixel Density etc. Only use the build.prop file if you have a B1-720 though!

Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.

ctyndall77 said:
Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.
Click to expand...
Click to collapse
Yes I recommend starting from the start then installing and moving all the files for the most amount of space on your device to install these files. In future updates I will provide updated apps and maybe a flashable ROM which can be flashed using stock recovery!
And if your using a B1-730, don't use the systemui.apk or odex. This will leave you with a black nav and status bar.

One last question. Is there a certain order to apply the files or not?

ctyndall77 said:
One last question. Is there a certain order to apply the files or not?
Click to expand...
Click to collapse
I recommend going in this order:
1: Install normal apks
2: Installing root
3: installing xposed apks and xposed installer it self.
4: Open the boot animations app and choose the cm12 boot animation.
5: Apply wallpaper
Then the rest if there are any more files.

If I Have A B1-710 With Android 4.1.2 I Can Use This?

Hugo Salce said:
If I Have A B1-710 With Android 4.1.2 I Can Use This?
Click to expand...
Click to collapse
Yes you can use 90% of this ROM woth your device. Use all of the files given in the ROM except for the SystemUI. Sorry for late reply
Sent from my D6503 using XDA-Developers mobile app

do you have a step by step guide for this?

On my acer b1-730hd 3g modem Huawei doesnt work on android 4.4.2 because it doesnt support Data usage or mobile data. B1 doesnt have opcion on/off... Does Lolipop 5 support 3g modem?

currently the link is broken
it will not work

Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!

malar413 said:
Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!
Click to expand...
Click to collapse
Snap. I'm hoping I can use it to cure the curse of losing wifi passwords on a B1-730.

I have acer b1-750 and I can't format it when I want to go to recovary mode I get this in my tablet
Entering Dnx mode.
waiting for fastboot command...
Help me plzz

This is a modified version of Kitkat.

Is this ROM available for download somewhere else?

@Brandon Nel, could you add a link again?

Stock Android/Linux software images by Planet Computers

The Gemini PDA has native Android + dual boot Linux support, and Planet Computers have provided a flashing tool for firmware.
There is a detailed guide on the flashing process of either Android and Linux available on their support page.
A flash guide for Linux is also available through there, along with a flash tool and drivers.
This thread will feature the stock image firmware for both Android & Linux.
In this thread I will also provide direct download links to those images.
Android:
Android firmware v1.0 (Nougat)
Rooted boot-verified.img (replace in above build)
Linux:
Debian Technology Preview build

Hey thre,
Does the PDA handle system apps differently? I've been trying to remove some system apps, for instance, Google Play Movies and TV, but my app remover, that has worked on my past three phones, is having trouble getting root access. I've used root checkers, and replaced the rooted boot img. in the Android foler myself.
I guess its just not rooted.
Any tips?
Thanks.

What about WIFI only device rooting?
Which image should i use?
Also I see that your link points to version 1.1 of the firmware.
Is it still compatible with rooted img?
Also is this new 1.1 version the one that users complain about battery draining?

Does anyone have the link to download the Partition Tool? The link they keep mentioned on the Support site just leads to a "Coming Soon" page: http://support.planetcom.co.uk/partitionTool.html

deleted, problem getting torrent seeding to work, sorry

when I get seeding to work, I'll update my posts

Official EUI 6.0.030S ROM (CN-EN) for Le Pro 3 AI [project x7 | codenames x650-x659]

Few days ago as expected, official users (who is using CN-EN official ROMs) of Le Pro 3 AI (further mentioned "x7") got an OTA update to the latest release of EUI 6.0.030S.
The miracle that expected was not appeared. It is still based on Android 6.0.1 (Marshmallow).
The ROM is still not localized for other countries, it contains only CN and EN languages.
And there still many bloatware of LeEco services that is very annoyance.
But first of all, the apps inside are now more optimized and as I see, they starting and function faster then previously.
Ok, let's go to the main part - links =)
The Official Site where you can download the ROM based on OTA update scheme is HERE. Also you can download a copy of OTA package from HERE.
But if you want to download faster, you can use my clouds where I'm continuously holding the most of Official ROMs for x7.
---> MEGA (follow into the folder called "original_stock")
---> FEX
Inside my clouds you can find that the ROM filenames contains not only a version but also an appropriate suffix (_OTA or _FASTBOOT). It's used to separate the ROMs by the installation method.
The FASTBOOT prepared ROMs contains an installation scripts (.BAT for Windows and .SH for Linux/Mac) for not only full installation (with clearing of User Storage), but also for update (without clearing of User Storage).
Please be careful, don't even try to install via FASTBOOT without clearing of User Storage, if you currently have functioning non Official multilingual EUI like 5.9.027S (faked as 028S in menu "About phone") or other non official!!! If you'll do this you will get many conflicts in settings and apps.
I expect that the FASTBOOT updating instructions are widely known, but remind them once more:
1) Enable the "Developer options" menu by clicking on "Build number" 7 times in the "About phone"
2) In the "Developer options" menu, turn on "OEM unlocking" and "USB debugging"
3) Connect the phone to the computer with a USB cable
4) Run one of the installation scripts from the folder of the unpacked firmware
5) Immediately upon startup, allow on the phone screen the "USB debugging" permission for your computer, preferably within the checkbox "always trust this device"
6) Wait until the installation process finishes (15-20 mins), calmly referring to the fact that the phone itself will reboot into FASTBOOT mode, and also please ignore the Sparse format error message (it's normal)
7) The phone itself will reboot into a new OS ... the first launch will be very long
Please feel free to ask anything here about the installation process, cloud links etc.
But be ready that I'm not fast answering.
Any other questions including the comparison of EUI versions performance and functionality will be ignored by me.
We still have the device that is highly secured with unknown protection mechanism and that gets us unable to build any quality custom ROM. =|

thank you
I should have researched before buying the device kk was already "lost" trying to find a customized rom for him. this part of the text: "We still have the device that is highly secured with unknown protection mechanism and that gets us unable to build any quality custom ROM. =| " , clarified me a lot

I istalled it but it does not have google play store?

azizo07 said:
I istalled it but it does not have google play store?
Click to expand...
Click to collapse
ROM does not have Google applications. You need install it. I think this still working in this version: https://forum.xda-developers.com/le-pro3/leeco-le-pro3-a1-model-x651-guides-development--and-mods/automated-installer-gapps-morelocale2-t3752576

Ok installed the 30s mod version from https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
and it includes gapps.
You can install another launcher to get rid of ads.
There is no root for this rom, right?

azizo07 said:
Ok installed the 30s mod version from https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
and it includes gapps.
You can install another launcher to get rid of ads.
There is no root for this rom, right?
Click to expand...
Click to collapse
030S mod is based on APKs of 030S with few modifications... but it also runs the old Boot from version 027S... so it may have some unexpected behavior...
yes, all of these ROMs have no root... but with mods based on Boot of 027S version you can use a temporary root (one time booting into TWRP) for further system modifications and then back to boot with native stock kernel and modified system will run good (expect the problems with apps you may cause by modifications)

hi, how i can install this ROM if I use a non official Rom? I mean, I recived this phone yesterday with a 028s (stable) that is non official, and I want to install this official ROM.

Help please
My cell phone has brick
You have some rom to fix it?

Does the NFC work on this rom? I had 028s before but the NFC was disabled.

Hi im install rom eui 6.0.030s "https://4pda.ru/forum/index.php?showtopic=895159&st=2020#entry77308634"]https://4pda.ru/forum/index.php?showtopic=895159&st=2020#entry77308634 But me phone have in antutu 50000 . Ealier was 100000. What is wrong i see Stock-thermal.zip but i cant dowload . plise help

can't see inside the package "4) Run one of the installation scripts from the folder of the unpacked firmware"
or can i use rename the package to update.zip and run on the system update?

cyzarine said:
can't see inside the package "4) Run one of the installation scripts from the folder of the unpacked firmware"
or can i use rename the package to update.zip and run on the system update?
Click to expand...
Click to collapse
What you can't see? The scripts?
You need to look at the contains of unpacked ROM zip that have suffix "FASTBOOT" in filename. There must be files with names like "x7_fastboot_tool.bat" and "x7_fastboot_tool_noUser.bat" and also same files with ".sh" extensions for Linux.
For installation to start you need to run one of this scripts. To run from CLI (CMD), not by double-clicking on it.

what's the score in antutu in new rom ? I have 50000....

dilnix,
I've downloaded the FULL_X7_X7-CN-FN-KGXCNFN6003009091S-6.0.030S.zip which don,t have the fastboot tools.
Do you have instructions to install this?
Big thank you!

cyzarine said:
dilnix,
I've downloaded the FULL_X7_X7-CN-FN-KGXCNFN6003009091S-6.0.030S.zip which don,t have the fastboot tools.
Do you have instructions to install this?
Big thank you!
Click to expand...
Click to collapse
This is an OTA package. But it's buggy, my try to make a direct update from 028S to this 030S with OTA way was failed, and I heart many reviews about same behavior.
So I think the best way to update is to use Fastboot with scripts and executable provided in my package that contains "_FASTBOOT" suffix in filename.
From there you can use script "x7_fastboot_tool_noUser.bat" (or .sh option in Linux) to make update to 030S (only from clean stock 025S, 026S or 028S, not from fake 027S or any mod) without clearing of Userdata Storage.
Or you can use script "x7_fastboot_tool.bat" (or .sh option in Linux) to make a new installation of 030S with clearing of Userdata Storage (from any other previous ROM).
If you can't download by my links provided in topic, please write here and I'll try to solve this.

grzegorzkuc said:
what's the score in antutu in new rom ? I have 50000....
Click to expand...
Click to collapse
My x650 shows 87000 in antutu on 030S. I can't know what is reason you having less.

Currently my Le pro 3 ai is on non official 5.9.27s I have to downgrade it to 5.9.25s.what should I do. Further I want to update my device to eui 6.0.30s. Any help is highly appreciated .

I think that is 027s custom rom better than this 028s. I recommend you to not change anything.
Sent from my LEX657 using Tapatalk

AmanS99 said:
Currently my Le pro 3 ai is on non official 5.9.27s I have to downgrade it to 5.9.25s.what should I do. Further I want to update my device to eui 6.0.30s. Any help is highly appreciated .
Click to expand...
Click to collapse
As an example of this way how to move into stock 028S with flashing first 025S and then just update to 028S (or 030S if you want) I prepared a video half of year ago. HERE
I understand that not all processes there are perfect... for example I used ADB to push ROM instead of MTP that is much faster =)
But if you have experience and you sure in other option of processing the steps explained in this video - enjoy and good luck.
Hope it will help somebody.
P.S.: Now I have some trouble with focus (can't focus larger then 120 cm) in stock Camera on EUI 030S and have a plan to get 028S back just for testing of Camera and focus processing.
P.S.2.: If you will have desire to get back into custom 027S you had earlier, you always can make it. It's available on both forums (XDA & 4pda). But you need to know, that changing of using between clean stock and custom ROMs is always requires you to clean a Userspace too.

Thanks for your reply . But I want to ask is there is risk of getting brick if anything goes wrong.