Related
I got my new black verizon s3 yesterday and i love it, buttery smooth. I was coming from a HTC Thunderbolt. I had rooted my thunderbolt, however since rooting that phone, i noticed that data connectivity didnt seem to be as stable as the non rooted version of that phone.
Here is my question, do you guys recommend rooting this S3 phone? Has it effected the data connectivity (dropped signals, etc)? Some advice and direction for this new S3 user would be helpful from some of you all who have been S3 users for a while. Thank you!
I would recommend rooting since there is a lot of support for the device. Data should be fine but there have been some problems either user related mistakes or bugs in a ROM. Those problems are fixable. Most of the ROMs are stable even the 4.2 ROMs.
i rooted and i think its worth it. it is easy to do and pretty low risk. I did mainly because i wanted to under clock and get better battery life. I haven't noticed any issues regarding loss of data or anything. i run into some issues at times because i try different kernals and roms that are not 100% in their stable phase. But the act of rooting itself isn't going to cause you any issues.
thanks guys, i am going to root the phone tonight after work. i browsed thru the rooting instructions for the jellybean update software (which i got when i activated my phone). I just didnt want to run into unstable data connections like i had with my thunderbolt.
Can you guys recommend any good 4.1 Roms as well as 4.2 roms? Also what is the difference between android 4.1 & 4.2?
It depends on the ROM as all 4.2 ROMs as of now are AOSP ROMs while the 4.1 ROMs are either TW based or AOSP based.
TW is ok... better then Sense IMO, however I like the stock ASOP feel. I will give a 4.2 rom a try. can you recommend a popular, 100% working 4.2 ROM? I looked in the dev section and there are so many Roms to choose from........ 24 hours of having my S3 and i LOVE it! so buttery smooth!
Blackbean 7 Is the most stable of the bunch as of now.
Ok. If you are going to root and Rom there are some things you need to know.
Your going to want to unlock your boot loader. And make an imei backup incase you lose it during a flash.
Search those up and get them done and your good to go
Via my Google Galaxy S3 running magic beans
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
thanks guys, i rooted the phone with no problems last night. got root and unlocked bootloader. I wanted to try out CM10 so I fla**** it this morning. So far so good. really like 4.2
bsdesign0000 said:
thanks guys, i rooted the phone with no problems last night. got root and unlocked bootloader. I wanted to try out CM10 so I fla**** it this morning. So far so good. really like 4.2
Click to expand...
Click to collapse
Do you mean Cm 10.1? Because if you flashed cm10 you're still on 4.1. Cm10 has a stable release while cm10.1 is still on nightlies. I've been running 10.1 nightlies for about a month and have only noticed very minor issues. So minor I can't even remember what they are.
Hello, I just rooted my Galaxy S3 for Verizon for the first time yesterday, therefore I am fairly new to this. After I flashed CM10 using TWRP, my Google apps are gone. I've tried flashing gapps on TWRP but it gives me a message saying "unfortunately, Google Play has stopped working." I know that this is due to the licensing issues and all, so my question is, what ROMS can I flash that has GApps available in it?
Thanks in advance!
SketchySean said:
Hello, I just rooted my Galaxy S3 for Verizon for the first time yesterday, therefore I am fairly new to this. After I flashed CM10 using TWRP, my Google apps are gone. I've tried flashing gapps on TWRP but it gives me a message saying "unfortunately, Google Play has stopped working." I know that this is due to the licensing issues and all, so my question is, what ROMS can I flash that has GApps available in it?
Thanks in advance!
Click to expand...
Click to collapse
To answer your question, any TW based roms will have Gapps with it. So practically any rom in the Verizon Galaxy S III Android Development forum would have it. To your issue, are you sure you flashed the right Gapps version? Just as reference you can get any version from here http://goo.im/gapps I assumed you flashed 10.1 version of CM since they are the latest which you should be using the 20130301 version of Gapps following the table that is on that website.
This might be a stupid question, but where can I find this forum? And yes, I did flash that version of Gapps... And correction; I have the 10.0.0-d2vzw version of CM. Am I supposed to get another version of Gapps? I really like this ROM and I want to try it out for a few weeks until I switch to a new one.
SketchySean said:
This might be a stupid question, but where can I find this forum? And yes, I did flash that version of Gapps... And correction; I have the 10.0.0-d2vzw version of CM. Am I supposed to get another version of Gapps? I really like this ROM and I want to try it out for a few weeks until I switch to a new one.
Click to expand...
Click to collapse
Forum section for us is http://forum.xda-developers.com/forumdisplay.php?f=1708 Go there and click on Verizon Galaxy S III Android Development forum. If you look at the website link I gave you, they have a table. On the left, it shows the CM versions and on the right shows the corresponding Gapps version you are suppose to use with that CM version. Since you are using 10.0.0, if you look on the left you will see 10.0.x and on the right, you will see the corresponding gapps version 20121011. You use that version for CM 10. Btw if you find CM 10 interesting go to the Verizon Galaxy S III Original Android Development forum. They have roms based on CM, AOSP, AOKP, etc. Be sure to read up more on flashing since you are pretty new to this. Bricking phones isn't fun lol
What ROMS do you personally recommend? And I know! I almost bricked it yesterday, and trust me, it was not fun at all.
SketchySean said:
What ROMS do you personally recommend? And I know! I almost bricked it yesterday, and trust me, it was not fun at all.
Click to expand...
Click to collapse
Depends on your preference. If you are into the Stock TouchWiz look but without the bloat that verizon puts, I recommend CleanRom. I also recommend it to people who are new to flashing since it is a pretty simple rom. This rom is pretty much as close as you can get to getting stock reliability. If you want to go into a more customize it yourself TouchWiz roms, I would suggest SynergyROM, Jelly 'Beans' Rom, Hyperdrive, or Axis. Besides each having their own tweaks and sometimes themes, during install, you get to choose which apps/settings/kernel/theme, you want to have, so pretty much you get to customize almost all aspects of the rom to your liking. They all also get updated on a somewhat regular basis. You will have to flash all of them and play with them to see which one is to your liking.
For CM 10.1 based roms, CM 10.1 Nightlies, Slimbean, Carbon Rom. I would be careful with these roms, as they are a bit temperamental with some phones. Most of the time you are fine and you won't get into an issue but the times that you do, you will have to read through the threads to see if there is a solution to it.
There are also the PARANOIDANDROID and ParanoidKANGdroid roms, I haven't personally tried them but heard good things, they are also based on CM 10.1
I really appreciate your help, bro. For now, I'll stick to the CM 10.1 ROM that I just flashed. It's good so far, and I finally got t solve my issue of gapps thanks to you.
Great example of helping someone! Posts like this are the reason why I became a member of this site and fell in love with it (actually my wife calls it addiction)! I wish there were more people helping others like this, it would only make this forum better.
Hi all.
I'm trying to run CM10.2 on my tf101g from this thread: http://forum.xda-developers.com/showthread.php?t=2402752
But all i'm getting after flashing from TWRP only asus splash and nothing is booting there. What i must to check or look for to fix this? CM10.1 with android 4.2.2 running very nice, but when i trying to go on 4.3 it fails. Flashing process done ok without any problem.
KatKiss with 4.3 also booted without any problem, but y really liked CM.
So, any advice? By the way, what happend with those builds from NoName team? No update since the end of september, why so?
Sorry, but I can't post in development forum due to restrictions for new users. Thanks for helping and for great job by the way.
I recently purchased a photon Q, unlocked the bootloader and rooted it. All went well until I tried installing a new ROM. I've tried installing both Carbon and CM11 but with no luck. Thankfully, I've been keeping backups of my stock ROM so I'm still able to restore the phone and use it.
I'm currently using cwm 6.0.1.3 , and I had been trying to install the new ROMs via rom manager. I'll try to get more error details up Friday as that's when I'll attempt to install the new roms.
I tried installing the latest nightlies for both CM11 and Carbon.
Any advice or help would be greatly appreciated.
Thanks
CWM 6.0.1.3 doesn't support SELinux and so it doesn't support any KitKat ROMs (CM11 and newer).
Use TWRP or OR as a recovery.
I wondered if that was the problem. How would I go about putting twerp on my phone? Do any threads cover that? Would it cause an issue with CWM or would I have to get rid of that in order to install TWRP?
Thanks, by the way.
[email protected] said:
I wondered if that was the problem. How would I go about putting twerp on my phone? Do any threads cover that? Would it cause an issue with CWM or would I have to get rid of that in order to install TWRP?
Thanks, by the way.
Click to expand...
Click to collapse
The TWRP page for the Photon Q goes over how to flash TWRP.
http://teamw.in/project/twrp2/137
Any recovery you flash will simply overwrite the previous one. Simply flashing TWRP as normal will just replace CWM.
Same with OpenRecovery, simply flashing OR over CWM will replace CWM with OR.
Let us know if you have questions. I like the fastboot method, but there was an app in the Play Store TWRP Manager - which I have never used, but should work fine.
Awesome! I replaced cwm with twrp last night. I'm going to try installing Carbon either tonight or tomorrow. Thanks a bunch for the help guys!
Well, it worked...sorta. i tried installing Carbon, but there seemed to be some kind of bug that didn't let the wifi turn on(along with some performance issues) and I have horrible reception at my place so that didn't get too far in setting up the phone.
So I installed the latest CM 11 snapshot and that's working great! Pretty awesome to be on the latest version of Android for a change!
Still want to try Carbon though, do they have more stable releases or do you just have to go out on faith with the nightlies?
[email protected] said:
Well, it worked...sorta. i tried installing Carbon, but there seemed to be some kind of bug that didn't let the wifi turn on(along with some performance issues) and I have horrible reception at my place so that didn't get too far in setting up the phone.
So I installed the latest CM 11 snapshot and that's working great! Pretty awesome to be on the latest version of Android for a change!
Still want to try Carbon though, do they have more stable releases or do you just have to go out on faith with the nightlies?
Click to expand...
Click to collapse
I run Carbon as my daily driver, no problems.
Post in the thread if you have issues. As always, clean flash before reporting any.
I posted this in a couple other threads as well but since you guys are talking about it... do you think the Carbon is superior to the CM10/11/12 roms? I've found mine to be laggy lately. Maybe it always was I'm not sure.. lol but I was thinking of going to 10.2.1 .. someone on another thread said he did that and it was like having a different phone .. it was so fast.
Fever905 said:
I posted this in a couple other threads as well but since you guys are talking about it... do you think the Carbon is superior to the CM10/11/12 roms? I've found mine to be laggy lately. Maybe it always was I'm not sure.. lol but I was thinking of going to 10.2.1 .. someone on another thread said he did that and it was like having a different phone .. it was so fast.
Click to expand...
Click to collapse
Please quit cross-posting. You are severely diluting any community effort to respond to you by posting the same question in so many threads...
Truth be told, YOU need to make the decision for yourself. Take a backup of your current setup and try something new, you have nothing to lose but some time. If you don't like it, restore the backup you took (please please take a backup IN RECOVERY before making any changes).
LOL sorry lets not kid ourselves. There are 4 active threads since May 24 in this sub category of the Photon Q. My intention was not to spam-post, however given the slow movement of the forum I posted in a few relevant threads in the thinking that those who were active would have subscribed and were maybe notified Sorry if I did a few too many... for tonite I probably have had a few too many Coronas (Cervesa Mas Fina!).
This device is in a production environment. There is not much room for any downtime on the device so I do not have that luxury of playing with it. All these Photon Q's I would think have the same specs so there must be a general consensus or benchmark'ed result as to which ROM offers best performance with the usability balanced. I do need more of these devices moving forward.
Funny thing, I live within 50 miles of Blackberry's campus and they have failed us yet again. Their passport phone is a little more reliable and less buggy than last years Q or Z models, however I'm still lacking a row of numbers and a dang home and back key. When are they gonna figure it out! Just using the gesture/swipe to get to the homescreen doesn't appeal to me. You can't give me a home button? Anyway #offtopic a little.. but is there no general consensus or are they so close its difficult to pick a winner?
/Fever
Have tried a number of ROM's carbon, PAC, Cmod, stock ICS, & JB.
Tried different flavours & unofficial versions.
I'm now happier than ever, running stripped JB - removed bloat ware & other obsolete APK's, plus added a few niceties using xposed framework.
Phone is fast - as in no slow downs & pauses, like I was getting with carbon & PAC, battery is unbelievably long life - using an xposed battery saver module, plus I added extended power menu options.
The main killer of all the other custom ROM's is the persistent Bluetooth error during calls. This is something that has been in the ROMs since Cmod wrote the first one, as all the other are built off of it.
If you don't require Bluetooth for calls, then go for it - personally I am finally happy with the JB stripped & tweaked stock.
Sent from my XT897 using XDA Free mobile app
Hi
I'm not very old... but I am old lolm but also, Ive had the TF101 since just after launch and for most of that time it has sat gathering disk only being used when visiting friends as internet access rather than use their computers, I tend to use my phone or a 7" tablet but I want to take it abroad and also upgrade the o/s from 4.1.1 and also run xbmc... or Kodi , the last upgrade was the Cyanogen mod, but when ive charged it today its really slow and I think it may be best to just do a complete wipe and update.
Can anyone give me any ideas on whats best, i'll only be using it for web browsing and media (xbmc) .. is it still up to the job?
Thanks
I suggest you update to the latest TWRP recovery by sidneyk first: http://forum.xda-developers.com/showthread.php?t=2434422
There are two actively developed kitkat ROMs for TF101: Unofficial OmniROM by sidneyk and KatKiss by timduru. I personally use KatKiss and it's buttery smooth, but I haven't tried OmniROM so I can't really compare the two. You could try both and decide for yourself which suits you best.
OmniROM: http://forum.xda-developers.com/showthread.php?t=2584265
KatKiss: http://forum.xda-developers.com/showthread.php?t=2592890
I have run both. I am currently on Omni. It runs smoother on my tf101 than KatKiss. I also have no need for features like multiwindow.
Both are great options!
I prefer TWRP over any other recovery I have tried.