Database Info

[Q] Need help with BRICK will donate for solution

I apologize for starting a new thread for this but I'm dying here! I have been reading all the bricked captivate tales of woe for 2 days straight and I have tried all the button combinations till my fingers feel like they are going to bleed. If somebody can help me with this mess I would gladly donate to the beer fund for their trouble.
This is my second go round with paperweight style captivate but I'm lost now. The first time I was visited by the phone-!-computer image but I had no problem getting it into download mode by removing battery,sim, and external sd then replacing battery holding down both volume buttons down (no power button) and inserting usb cable(odin one click was already running on my pc). I flashed back to stock twice with this method and no issues. The first time was to load cognition and the second time was after messing with some mods my phone started lagging horribly bad.
I guess I got a little cocky this last go round and was messing around with ninja morph(no issues there) then I loaded a market app called Galaxy S Tweaker. I made a few tweaks with the app and went to reboot, subsequently my phone will now get stuck on the white ATT boot screen.
As previously stated I have tried all variations of button combinations to no avail. The only 2 screens I see are the battery charging screen and this dreadful white AT&T screen.
Is there anything I can do to get my computer to recognize my phone and/or get into download mode.
Please and Thank You!!

Have you tried adb commands? Such as 'adb reboot download'
Sent from my SAMSUNG-SGH-I897 using XDA App

http://forum.xda-developers.com/showthread.php?t=775911
Try what's at the top and report back. Should work... otherwise there's the usb jig
Sent from my SAMSUNG-SGH-I897 using XDA App

CB650 Wolf said:
Have you tried adb commands? Such as 'adb reboot download'
Click to expand...
Click to collapse
I am having issues trying adb. I have everything installed but I think I made an error when updating my path and overwrote the existing text so that the only thing in the path is the location of adb. I get an error every time I try to run it

ronandi said:
Try what's at the top and report back. Should work... otherwise there's the usb jig
Click to expand...
Click to collapse
I have tried several times I just end up going back and forth between the white screen with AT&T logo and the battery charging screen

micjenks said:
The first time I was visited by the phone-!-computer image but I had no problem getting it into download mode by removing battery,sim, and external sd then replacing battery holding down both volume buttons down (no power button) and inserting usb cable(odin one click was already running on my pc).
As previously stated I have tried all variations of button combinations to no avail. The only 2 screens I see are the battery charging screen and this dreadful white AT&T screen.
Click to expand...
Click to collapse
What you did originally should work again, keep trying, if you had usb debugging enabled try the adb reboot download method. What error is adb giving you anyway?

uninstall the sdk completely. Reinstall it into a folder and do not move anything out of the folder. I keep mine in C:/Users\[user name]\sdk.

Hey there, im pretty new to Android myself and had a very similar issue :S
It seems like you have lost your three button combo, which was exactly what happened to my poor Captivate, the "USB jig" was the only method I found that could put my phone in to download mode, if you search the forums there is a pretty decent walk through on how to do it!
Basically, as long as you have some skill with a soldering iron and a micro USB cable to cut up you can do it pretty quickly. I bought the resistors from a local computer store (you need 301k resistance) and used a scalpel to cut the plastic from the end of the cable, then soldered the resistors to the 4th and 5th pins in series. Once you have done that, plug the cable in to your computer and fire up Odin, the connect your Cappy and presto, download mode!
Honestly when I saw the instructions to build the jig I was skeptical, but since I exhausted every other option first (and had already voided my warranty obviously) I decided to give it a shot and it worked like a charm!
Give it a try and let us know how it goes!

CB650 Wolf said:
uninstall the sdk completely. Reinstall it into a folder and do not move anything out of the folder. I keep mine in C:/Users\[user name]\sdk.
Click to expand...
Click to collapse
should I remove it from the environmental variables path first and then replace it? do I need to remove it from eclipse as well before I reinstall it?
ADB keeps telling me device not found

Try a different usb port, preferably ones at the back of the motherboard.

peachpuff said:
Try a different usb port, preferably ones at the back of the motherboard.
Click to expand...
Click to collapse
I have done that, initially I had to move to the back to get it to work with odin
Edit: Can anyone link me to the solder jig how to? I found the solder-less i-go thread but wanted to look at both before I head off to radio shack and potentially the liquor store depending on how this goes..... going back to my BlackBerry sounds about as appetizing as a warm bath and razor blades. I've had my Captivate for 2 weeks and I'm already spoiled on Android goodness

http://forum.xda-developers.com/showthread.php?t=872476
This is the solder-less method, however the only difference is that in the above thread, he didn't use solder to connect the resistors, it should work exactly the same! Otherwise you can simply solder the resistors in series to the exact same spots and you are good to go

Ok well I am off to radio shack to test my luck with this. will report back with the results...... wife has already informed me there is no way in hell I am buying another one so pray for me lol

Rofl well in that case my prayers are with you! If you need any help with it feel free to PM me.

ugh I have to go back to radio shack.... one of the wires broke off while stripping it, I tried touching the resistors to it anyway but it's not working so I am going to give it another shot. If that doesn't work I ordered one from norcal einstein..... this sucks!

micjenks said:
ugh I have to go back to radio shack.... one of the wires broke off while stripping it, I tried touching the resistors to it anyway but it's not working so I am going to give it another shot. If that doesn't work I ordered one from norcal einstein..... this sucks!
Click to expand...
Click to collapse
Although mine has never been this bad, the fear of it happening has always been in the forefront of my mind.
Your wife sounds alot like mine. In that case, much good luck coming your way from here.
Sent from my SAMSUNG-SGH-I897 using XDA App

LOL I have been pushing my luck a bit lately considering I got a BlackBerry Torch in August (Piece of Sh*t). I have been developing BlackBerry themes for the last 2 years and am transitioning to Android.... gonna be hard without an operational device lol

Did you get everything to make your jig?
Sent from my SAMSUNG-SGH-I897 using XDA App

I believe so.... trying to peel this damn silicone stuff off without ripping any wires off this time(got a spare igo adapter this time just in case)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It ain't Purdy but it's B-E-A-UTIFUL!!!!!

Captivate Hardware Reset Button

Hey, Just thought I should post this... To reset the Captivate without removing the battery, there is a connection on the board called "TP". It is right below the MMC card and you can barely see it with the phone's case on it. Here is a picture of the rear case removed. The TP is the white dot. It is covered with white paint to avoid accidental connection.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can stick a needle through and ground "TP" to the side of the SDCard. Your phone will reset.
It's a signal line. and it's separated from bat+ by 1000ohms.

Thats very useful. Thanks!

Will this reset work on "soft" bricks and/or paperweight states?
Sent from Gingerbread on a Captivate using XDA Premium App

It will work on soft bricks. I'd like to see how a hard brick would react to UART communications. I've got one comming, so I will be able to tell you more soon.

This is a great find for flashing addicts. Thanks so much for sharing this. When I get to my PC I will hit the thanks button.
Sent from Gingerbread on a Captivate using XDA Premium App

I've found it quite useful... but I've been doing some non-standard things with my phone...

That looks sick! Someone's been having fun. Has your phone orbited the Earth yet?

Haha not quite... I've been researching non-invasive methods of recovering bricks, and it requires invasive techniques for analysis. Its amazing how many people brick their phones and how expensive jtag methods are.

Doesn't work on Hard Bricks. Tested.

So is it possible to fix a soft brick using this method instead of making a jig?
On my way home right now, guess I will find out soon enough, thank you

Wasn't quite sure what it was gonna do, and hoping it would magically get me into download mode, where the usb or power wouldn't. big down side, it botch'd something in my hardware, and my battery will no longer charge, can not run the phone without being pluged into the wall or pc. unbricked using a standard ol jig, flashed to 2.1 via 1 click, dunno if it just fried battery or did something else. Any ideas what to trouble shoot first? i've tried reflashing, few different roms, tried reseting battery stats, tried factory reset via settings, and via 1 click with no luck, wont be able to test another battery till tomorrow

bloodforge said:
Wasn't quite sure what it was gonna do, and hoping it would magically get me into download mode, where the usb or power wouldn't. big down side, it botch'd something in my hardware, and my battery will no longer charge, can not run the phone without being pluged into the wall or pc. unbricked using a standard ol jig, flashed to 2.1 via 1 click, dunno if it just fried battery or did something else. Any ideas what to trouble shoot first? i've tried reflashing, few different roms, tried reseting battery stats, tried factory reset via settings, and via 1 click with no luck, wont be able to test another battery till tomorrow
Click to expand...
Click to collapse
You did something else....
I used this method about 50 times consecutively. No ideas for you on your issue.
This reboots the phone and that's it. Its easy for bench testing purposes. How long did you hold it?

Just until the screen shut off, then released, not really what sure happened. Is there something rom side that controls the charging of the battery or is it strictly hardware?
Just hoping battery just decided to die, needed excuse to get a bigger one anyways.
Edit-Yeah definetly thinking battery is bad now, it showed 100% charge this morning finally, but as soon as i unplugged from wall it died, plugged it back in and was showing it dead again. Soo hmm, dunno sound like bad battery? fixin to make the 30min trip to ATT store to see if they can check it or swap it.

just wanted to say, i wasn't trying to imply the reset you pointed out had killed the phone, i just wasn't quite sure what happened, and this had been one of the last things i had done.
I just didn't realize a battery could go that quickly, had it tested today, and the guy at store said i was the first person he could tell without a shadow of a doubt there battery was dead.
1500mAH battery, and it read dead at first then full charge on tester at 28mAH.

This looks very interesting and I would like to try it out. Before I try it, I was wondering if you could explain it more in depth like if the battery should be in the phone, if it is necessary for the battery to be fully charged and if this method will work on all Captivates. I also noticed a number on your sd card slot that is different than mine but I assume all phones have a different one. Thanks in advance

[Q] green screen!

Turned off my tf last night to charge. Turned her back on now and the boot screen is neon green and so is everything else. Anyone have this problem before?

either overheated cpu/gpu pover off for a couple hours then turn it back on
or digitizer cable is loose either open it yourself or rma

i just took some screen shots and opened them on my computer. The colors are normal. Ill try the power off for a few hours and see what happens. Any other suggestions?

ok if the screen shots are normal that probobly means something is wrong with teh screen its self as like i said before loose digitizer cable

My TF was turned off all day today and is still giving me the green screen. Here are some pictures of what I'm still dealing with.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im going to have to send it in and hopefully they can fix her up. Am i the only unlucky one with this problem?

calamity*** said:
My TF was turned off all day today and is still giving me the green screen. Here are some pictures of what I'm still dealing with.
Im going to have to send it in and hopefully they can fix her up. Am i the only unlucky one with this problem?
Click to expand...
Click to collapse
You could do it your self and to be honest with all the rma horror stories id fix it myself if i was in your shoes
Sent from my tf101 using xda premium 1.54Ghz

I actually had the same problem and I jsut turned it off for a couple of hours and it went back to normal

Yeppers... me too.
I noticed some green digitized flickering yesterday when I was moving/angling the tablet while docked. When I opened it, the green digitized color would flash and then go away. I undocked the tablet, powered off and restarted.
The green color was still present and it seemed to go and come as I pressed into the screen. It was almost like the screen was loose a bit from the casing. I did a hard reboot followed by a factory reset. Still the screen was flickering with the green digitized. I found that once I ran my thumb around the edges ensuring that it was tightly fit inside the casing that the screen went back to normal.
I never lost any function or touch sensitivity but am certain that my screen was loosening up abit from the casing. I mailed it off with RMA ticket today. I hope they will fix my tablet and return it soon or replace it.
Tablet has never been dropped, but I do dock & undock often. Furthermore I've found that while docked the tablet wont open much beyond 90 degrees. I'm wondering if me constantly opening it up to it's maximum angle while docked weakened or stressed the casing and loosened the screen. Not sure.
I could not find a bunch of these issues with the TF101 so I'm hoping this is not symptomatic of this model with heavy dock/undock use.
What's the normal turnaround time on these RMAs? Any ideas?

I had sort of simular problem with my transformer. After charging my screen was green and pink.
They will fix at rma because it is backlight leaking. Thats what my report said.
The service wen i sended it was fast. Send on tuesday and 7 days later the allready mailed it back with a new screen.

Mine, definitely had some light bleed around at least 3 sides, but it wasn't distracting so I just ignored it. Hope to get it back soon and without any further issues.
*crossing fingers*

Tony Maroney said:
Mine, definitely had some light bleed around at least 3 sides, but it wasn't distracting so I just ignored it. Hope to get it back soon and without any further issues.
*crossing fingers*
Click to expand...
Click to collapse
Wait, I can send it in for light bleed?
On a black screen I can see bright spots in the edges, apparently where the backlight is.. I figured it was normal.
Also I have 8 or 10 stuck-on-white pixels. You can't find them unless you have a Black screen. Can I RMA it?

I just got back my son's Transformer from repair after his screen did the same thing only his was red.
Called in to get RMA but was told to do a factory reset first. That, of course, did nothing so back it went. Seems to be fine now but it has only been back a day.
You should have no problem getting it approved for RMA.
Sent from my Transformer TF101 using Tapatalk

calamity*** said:
Turned off my tf last night to charge. Turned her back on now and the boot screen is neon green and so is everything else. Anyone have this problem before?
Click to expand...
Click to collapse
It might be a problem with the screen connection

Phone power downs randomly, then...

So i've recently come back again with an issue i had before with my S2 where i had an issue of it randomly shutting off then vibrate. Back then i just restock to ATT and made sure the power button wasn't stuck. It wasn't happening for a while until just yesterday. [ I did go back to Jellybean after the problem stopped happening as well]
Now currently i've restock back to ATT 2.3 /
So now im almost positive it isn't my battery because once that problem started happening [still stocked] again. Also it would randomly shut off when im and listening to music with headphones and emit a high freq. pitch and the LED camera was flashing when it vibrated as well. Its also very hard to get it back to recovery/download mode but i can and also just starting it up again with the power button and i have to also take out the battery as well .
So so far i've gone back ATT with Odin, and was wondering if someone could help me.

You restored to stock 2.3? Gingerbread? I've only experienced this when uninstalling apps on jellybean, particularly apps with root access. Will do a hot boot. Likely because the system is not mounting or unmounting properly during process. I assume. Never once have I experienced this on any ICS Rom. Try Sky ICS or Embryo 5.x.x Rom. They're both pretty stable.
Sent from my SGH-I727 using xda premium

aliysared said:
So i've recently come back again with an issue i had before with my S2 where i had an issue of it randomly shutting off then vibrate. Back then i just restock to ATT and made sure the power button wasn't stuck. It wasn't happening for a while until just yesterday. [ I did go back to Jellybean after the problem stopped happening as well]
Now currently i've restock back to ATT 2.3 /
So now im almost positive it isn't my battery because once that problem started happening [still stocked] again. Also it would randomly shut off when im and listening to music with headphones and emit a high freq. pitch and the LED camera was flashing when it vibrated as well. Its also very hard to get it back to recovery/download mode but i can and also just starting it up again with the power button and i have to also take out the battery as well .
So so far i've gone back ATT with Odin, and was wondering if someone could help me.
Click to expand...
Click to collapse
Can you get me a copy of the info tag under the battery please? There was a series (which I had 3 of) that had the same hardware issue that you are experiencing. I'm not near my SR of the series, but will look when I get home and post. It is however an issue that AT&T and Samsung are aware of. AT&T gave me a GS III due to the issue.

risondi 1650
Edit: I see!

aliysared said:
Sure:
Model: sgh-i727
fcc id: a3LSGHi727
Rated 3.7 1500ma
IMEI:
S/N : R2CBA64411R
SKU: 65319
Click to expand...
Click to collapse
Well that looks like it was from a different batch. Same factory but different batch. Most likely you have the same hardware issue I had. My recommendation is to contact AT&T via PHONE, not the international line. You don't want warranty dept. Tell them that you are on a Sky Rocket, and that this is your "x" one that was under warranty, and that all "x" of them have failed under the same known hardware issue. The options you will have are either get a replacement, file under any extended warranty you purchased, OR you can tell them that it is unacceptable, and you would like a different device. They cannot offer you a note, note 2 or any of the iphones. I opted for the S III, and have been happy ever since.

Just so you know it is not the best idea to post you're IMEI publicly.

hechoen said:
Just so you know it is not the best idea to post you're IMEI publicly.
Click to expand...
Click to collapse
man now i cant even remove it from the other users qoute, but i think i found out it is the powerbutton because when i eventual am able to boot up my phone, if i press the powerbutton to wake up it , it then a few seconds later will shut down randomly and start vibrating with either the flash or no flash at all [camera LED] also it seems like my phone was wet and the power button is not stuck because i opened up the entire phone and its still clickable with no problems.

aliysared said:
man now i cant even remove it from the other users qoute, but i think i found out it is the powerbutton because when i eventual am able to boot up my phone, if i press the powerbutton to wake up it , it then a few seconds later will shut down randomly and start vibrating with either the flash or no flash at all [camera LED] also it seems like my phone was wet and the power button is not stuck because i opened up the entire phone and its still clickable with no problems.
Click to expand...
Click to collapse
Done did, well get a dental pick (not a tooth pick) and gently clean around the edges of the power button. When you do get it powered back up, make a backup to your sd card, JUST IN CASE you need to send it back to sammy.

I dunno if I'm having something similar happen. My phone was working completely normally (CM 10). Working this AM ok, I pull up an email, and then it shuts off, tries rebooting, the Samsung logo comes up, I get a brief flash on the screen (sometimes just a single line that varies in position on the screen) and then it keeps vibrating. Never had this happen before....and of course it happens as I am at the airport without my laptop to try and put it into download mode...I can't even get it into recovery. Ugh!
Any thoughts?

jslanger said:
I dunno if I'm having something similar happen. My phone was working completely normally (CM 10). Working this AM ok, I pull up an email, and then it shuts off, tries rebooting, the Samsung logo comes up, I get a brief flash on the screen (sometimes just a single line that varies in position on the screen) and then it keeps vibrating. Never had this happen before....and of course it happens as I am at the airport without my laptop to try and put it into download mode...I can't even get it into recovery. Ugh!
Any thoughts?
Click to expand...
Click to collapse
sticky power button, 1stop sticky has a few links for that problem

Or take the phone apart and clean it. Its not hard like 6 00 screws and a box cutter then its really easy to clean.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what the power button looks like
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Thx. I did take it apart. Luckily I had a micro screwdriver for glasses with me, since I am out of town. Took the board off, blew into it, pressed the button a bunch, etc. Seems to be working now.
Sounds like this is not an uncommon problem though. Makes me wonder about the quality of the parts... This phone is just over a year old, and has always had a case on it (though I do keep it in a pocket so there could be some lint working its way in).
I am a novice at taking this phone apart, and I managed to do it with the following:
An old laminated Blockbuster video card
A hotel door key
A glasses flathead screwdriver.
So if you are nervous about taking it apart, don't worry... It's not hard.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Flashing green/yellow when "charging" but not charging

Story time first, then the question.
Okay so I have a tablet I got replaced by the recall, and I'm going to say it - I'm not gentle with my devices. That's why I made sure to have a case on it at all times. The other day I was trying to pick up my tablet in the dark because I had put it on the floor for a second to get it out of the way to turn off the light to go to bed. I found the cable it was plugged into and slowly started picking it up by the cable. I know, I know, but it worked, almost. About three inches off the ground it came unplugged and dropped, then fell flat on the display side. When I tried to turn on the screen to use it (I'd done that before so I didn't think it would be a big deal. Besides, this is a tough little tablet - my brother left his on top of a car and drove off and when he got it back there was a little cosmetic damage and not even a cracked screen, even though it hit on the corner) the backlight came on, but nothing came on the display. So then I took it to a local repair place to get an evaluation done. The display cable had come unplugged, nothing more. Just needed to get plugged back in. For $30. HA! I took to the internet to find a teardown I could use to fix it myself and save the money. But the video I found didn't have any words, spoken or otherwise, so I ended up just having removed the battery and mobo and putting everything back in. Well, it worked. The display came back on and I had my tablet back. But the warning that my card wasn't in came up and when I figured it out, it turns out when I had lifted the mobo, the card slid out a little and when I put it back it snapped the card, so now I need a new one. But now once I put it back together there's a new problem. When I plug it in to charge, the led flashes green and yellow, but it doesn't actually charge. I guess I somehow knocked loose another cable or something while I was in there.
Okay now for the question.
Does anyone know of a diagram of the connections or a teardown that labels things I could use to more confidently get this tablet working again? I think I mainly just need to know where the charging circuit connections are. I'm pretty sure of which one I need to plug in correctly to make it work but I'm a little gunshy this time and would rather know for sure. The battery is down to 11% and it's off right now, but I use this thing too much to do without a tablet for long.

I got similar problem, my 3 year old son dropped his tablet couple of times accidentaly and suddenly we could not charge it anymore (orange/green flashing). I have a replacement battery prepared for my pyro tablet (his tablet is the replacement), so I decided to replace the battery. Once I opened the tablet (you can use this guide https://www.ifixit.com/Guide/Nvidia+Shield+Tablet+Battery+Replacement/50117) I found the green wire for the battery PCB detached from the main board . I soldered it and that's it, now it works again!
Now, I found that the new tablet is different that the one showed on ifixit, do you guys know what is that circuit installed on the tablet back cover?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}