Database Info

[Q] bootloader unlock doesn't 'register' in Nexus S

I've spent lots of time looking through forums trying to answer/solve my issue so I hope it's not something stupid I've missed. Sorry for the trouble if it is though.
So, my issue is that I simply cannot unlock the bootloader of my Nexus S (i9020T). The phone's connecting to my computer via Samsung Android ADB Interface as seen under the Device Manager. I see the proper device ID when I type "fastboot devices" into the adb command prompt w/ phone in fastboot mode. Then, when I type "fastboot oem unlock" the phone starts the unlock verification process -- I select yes, the phone restarts, but it goes back to the stuck Google screen. Then, if I pull the battery and go into fastboot mode directly, bootloader's still locked. I've tried this quite a few times and same result -- same result trying to unlock w/ some of the toolkits here (WugFresh's NRT, m.sabra's root tool). Haven't tried Odin but from what I've read it would also require an unlocked bootloader to do anything. I've even tried a few other things like pushing recovery and bootloader images onto the phone via adb, but these also failed due to the locked bootloader.
I also cannot enable USB debugging under phone settings either b/c I now can't get past the Google logo/fastboot mode menu. Didn't think this was required to unlock bootloader though.
Background: Phone had the latest auto updated version of Android when the phone all of a sudden turned off in the middle of the night recently. Weird b/c the battery was basically full. It now always gets stuck on the Google logo upon normal restart. It goes into fastboot mode OK if I remove the battery and press power/vol. buttons -- I then first tried the restore and recovery functions there, etc, but no effect.
Any ideas? Or is the phone just dead now?
Thanks! :fingers-crossed:
Edit:
I've now tried what's described as a possible solution here: http://forum.xda-developers.com/showthread.php?p=44753413#post44753413. It didn't work since that also needs bootloader to be unlocked.
I've also tried to solve it w/ all versions of Odin. None of them detect my phone even after installing Kies w/ drivers. I think I have the required drivers though since I can command the phone fine through adb. And Odin should need bootloader unlocked to work anyway...
Edit 2:
To add, one of the first things I tried was to do a manual factory data reset in the recovery menu (selecting 'yes' to erase all data).
And I tried adb sideload of the OTA .zip file. But installation was aborted. The following appeared immediately under the regular adb sideload instruction in the system recovery menu (under "Now send the package you want to apply to the device..."):
Finding update package...
Opening update package...
Verifying update package...
Installing update...
file_getprop: failed to stat "/system/build.prop": No such file or directory
Installation aborted.

Bump w/ more info.

LG GPAD 7 stuck on Fast Boot

Purchased an Lg Gpad 7 Wifi tablet (v400) 2 weeks ago. Came with preinstalled Lollipop android so i couldnt install a recovery rom to flash any other custom roms. Downgraded to Kitkat version following the instructions on Xda forums and succesfully installed Twrp. When i installed Cyanogenmod 12.1 through Twrp i got stuck in fastboot screen.
Any suggestions and / or solutions would be greatly appreciated.

I had a similar problem.. Only mine was stuck at the bootloader. Go in TWRP and repair /data and other partitions. My data partition gave me an error since F2FS is a little flaky and some ROMs corrupted it (claimed they supported it). I would recommend erasing the system, cache and data partition if you can't get into TWRP.

The problem is i cant get out of fastboot whatever i try. It says start on bootloader but the tablet just restarts on an empty screen doing nothing.

Hakalai said:
The problem is i cant get out of fastboot whatever i try. It says start on bootloader but the tablet just restarts on an empty screen doing nothing.
Click to expand...
Click to collapse
if you have an sd card, try removing that, then reboot.
if that doesnt work, try entering fastboot command, fastboot continue

Tried without sdcard and i get the same fastboot screen.
How can i give any commands? The only options i have are Restart Bootloader / Restart / Power off. Tried restarting bootloader but i get nothing in return tablet just stays on with nothing on screen.

Hakalai said:
Tried without sdcard and i get the same fastboot screen.
How can i give any commands? The only options i have are Restart Bootloader / Restart / Power off. Tried restarting bootloader but i get nothing in return tablet just stays on with nothing on screen.
Click to expand...
Click to collapse
you said it was stuck on fastboot, if thats the case, install any needed drivers on your pc, connect device to it, open a terminal in the fastboot dir (after you go get fastboot), then try those commands i gave. you could also try, fastboot reboot dont think i mentioned that before.

bweN diorD said:
you said it was stuck on fastboot, if thats the case, install any needed drivers on your pc, connect device to it, open a terminal in the fastboot dir (after you go get fastboot), then try those commands i gave. you could also try, fastboot reboot dont think i mentioned that before.
Click to expand...
Click to collapse
Did as you said but every command i gave gives me an error message in adb terminal. There are new lines in fastboot menu in tablet now. Bottom two are SECURE BOOT - enabled & LOCK STATE - locked.

Hakalai said:
Did as you said but every command i gave gives me an error message in adb terminal. There are new lines in fastboot menu in tablet now. Bottom two are SECURE BOOT - enabled & LOCK STATE - locked.
Click to expand...
Click to collapse
hmm, ok, im guessing it would have said that normally, when not broken. all the command does is try to release it past where its stuck. it doesnt actually flash, lock, unlock, or change anything.
imo, this seems good, because now we know fastboot is working.
i own lg devices, but not your specific device. i would hate to give you some bad advice and make your tablet broken more, but if it were me in this situation, i would try to flash the factory KK firmware you used to downgrade with odin or however you did it. hopefully, that will clean everything up and let it boot properly.
if for whatever reason you cant do that, we could try extracting the factory file, and just flashing recovery and system, those should be the only things that got changed putting on twrp and cm normally.

Sorry, I have the serious proplem wtih my LG pad V400, I rooted it and using <LG Flash Tool 2014> with <V40010c_00.kdz> to downgrate the firmware but their is error then my LG pad stuck in fastboot menu as with just turn off, restart and restart bootloader. if i seclect one one them the tablet just logged again the fastboot menu
it stuck on the fastboot menu and i cannot do nay think with it. I can restart with factory restore mode but when select yes to restore, it will restart and log in fastboot menu again.
I downloaded adb and fastboot program and put in one folder <Minimal ADB and Fastboot> in C:\Program Files (x86)\Minimal ADB and Fastboot
I dont have recovery image so i download file <cm-13.0-20160421-NIGHTLY-v400-recovery.img> form your link to download TWRP file
move it to folder of fastboot programe and changed its name to <recovery.img>
I turn on the tablet and it waited at fastboot menu
when i run the command <fasboot flash recovery recovery.img> and they said some thing wrong like in picture
please help me

Phone is Cycling between Bootloader Unlocked Screen and Motorola Sp

I just tried rooting my phone. The phone is cycling back and forth between the bootloader is unlocked screen and the Motorola splash screen.
To repeat some steps from a prior post.
My phone had QPR30.80-58-3 .
I downloaded that ROM and extracted the boot.img file.
I downloaded the latest Magisk Manager and installed it on my phone.
I ran through the patching process for boot.img.
I requested an unlock code from Motorola and unlocked the bootloader.
I flashed the patched boot image which patched partition b.
I flashed the patched boot image to partition a.
I rebooted which began the cycle.
I tried holding down the power button but it returns to the cycle.
I can get back to the bootloader with the Volume Down and Power buttons.
Any suggestions on what could get me back to a functioning phone, rooted or not rooted?

I would confirm the version of the boot image you flashed matches the version of the installed rom. You could also try to flash the unpatched / original boot.img to see if that gets you booting again.

dafunk60 said:
I would confirm the version of the boot image you flashed matches the version of the installed rom. You could also try to flash the unpatched / original boot.img to see if that gets you booting again.
Click to expand...
Click to collapse
I checked that the image I patched was from the QPR30.80-58-3 ROM which matched the level after the phone was updated.
I flashed that original boot image which flashed partition a and then rebooted. I did not flash partition b.
It first came up with the unlock warning screen. It sat on the Motorola splash screen for a noticeable amount of time followed by a yellow screen with a circle around the Motorola symbol. Finally it ended up on a blue Hello there screen with a yellow start button.
This screen was unresponsive. Eventually through various cyclings through all this I ended up on a screen that said Android could not boot and gave me an option of a factory reset. I did that but it did not help getting past the Hi there screen.
I went back and flashed the QPR30.80_58 image on both partitions a and b. This got me back to setting up the phone again. The phone is at QPR30.80_58. I am considering just rooting at this level.

So I tried patching the original QPR30.80_58 boot image. I did notice that it appeared the phone had automatically staged the QPRS30.80_58_3 update. I proceeded in (false) hopes that I could stop that.
It flashed the b partition. Ended up stuck in the bootloader unlock loop. I flashed the a partition but no change.
Previously I had ended up on a recovery screen automatically after some time. I could not force this to happen.
I tried flashing the original unpatched boot image but would end up on a non-functioning Hello there screen.
I tried adb recovery and adb shell but came back with device unauthorized.
I tried following some instructions on using fastboot erase userdata and fastboot erase cache. No change.
I finally found out that the Recovery menu was option off the bootloader screen. However, that came up with No command.
Lenovo Rescue did not want to recognize my XT2043-4 device.
I flashed the unpatched retail QPRS30.80_58_3 boot image to both a and b partitions. That got me back to a functioning phone. After getting through the login and setup steps I did find that it was at QPRS30.80_58_3.
Out of curiosity, I tried Lenovo Rescue again. I received a "Failed to match connected device. Reconnect device, then try again." which did not work.
Now I am at a loss.

DougPeterson said:
So I tried patching the original QPR30.80_58 boot image. I did notice that it appeared the phone had automatically staged the QPRS30.80_58_3 update. I proceeded in (false) hopes that I could stop that.
It flashed the b partition. Ended up stuck in the bootloader unlock loop. I flashed the a partition but no change.
Previously I had ended up on a recovery screen automatically after some time. I could not force this to happen.
I tried flashing the original unpatched boot image but would end up on a non-functioning Hello there screen.
I tried adb recovery and adb shell but came back with device unauthorized.
I tried following some instructions on using fastboot erase userdata and fastboot erase cache. No change.
I finally found out that the Recovery menu was option off the bootloader screen. However, that came up with No command.
Lenovo Rescue did not want to recognize my XT2043-4 device.
I flashed the unpatched retail QPRS30.80_58_3 boot image to both a and b partitions. That got me back to a functioning phone. After getting through the login and setup steps I did find that it was at QPRS30.80_58_3.
Out of curiosity, I tried Lenovo Rescue again. I received a "Failed to match connected device. Reconnect device, then try again." which did not work.
Now I am at a loss.
Click to expand...
Click to collapse
Happy to hear you have a working phone again! The lack of touchscreen response & the stuck at the hello screen issues are what others have reported when they used a boot image from a different version than on the phone. I suspect that something got confused between the version & slot somewhere along the way. As far as the Lenovo Rescue software not seeing the phone, it's communicating via ADB. If I recall correctly I needed to reauthorize the PC to connect via ADB after updating from 30.80-58 to 30.80-58-3. When I connect the phone via USB there's a popup on the phone asking to authorize the PC. Can you connect via ADB in the command line? If yes, you may want to reinstall the Lenovo software. If no, I would troubleshoot the ADB connection.
I originally rooted the 30.80-58 version. When 30.80-58-3 was released all I did was flash the unpatched boot.img, took the update OTA, let it reboot, then flash a patched boot.img from 30.80-58-3. All worked as expected, user data was intact.

dafunk60 said:
Happy to hear you have a working phone again! The lack of touchscreen response & the stuck at the hello screen issues are what others have reported when they used a boot image from a different version than on the phone. I suspect that something got confused between the version & slot somewhere along the way. As far as the Lenovo Rescue software not seeing the phone, it's communicating via ADB. If I recall correctly I needed to reauthorize the PC to connect via ADB after updating from 30.80-58 to 30.80-58-3. When I connect the phone via USB there's a popup on the phone asking to authorize the PC. Can you connect via ADB in the command line? If yes, you may want to reinstall the Lenovo software. If no, I would troubleshoot the ADB connection.
I originally rooted the 30.80-58 version. When 30.80-58-3 was released all I did was flash the unpatched boot.img, took the update OTA, let it reboot, then flash a patched boot.img from 30.80-58-3. All worked as expected, user data was intact.
Click to expand...
Click to collapse
I double checked that I had USB debugging set, given I have reset a couple of times. I revoked all USB access and reinstalled the Rescue app. I still get the Failed to match connected devices error.
fastboot device will list the phone.
adb devices or adb devices -l does not list anything and adb shell says no devices/emulators found.
If I try to get into recovery mode I get a No command screen. I have been trying to take notes on what I did but there have been gaps in all the fiddling. I may have only flashed one partition the last time I tried putting back a stock boot image.
For USB drivers I downloaded the latest from Motorola. Was that sufficient for this?

DougPeterson said:
I double checked that I had USB debugging set, given I have reset a couple of times. I revoked all USB access and reinstalled the Rescue app. I still get the Failed to match connected devices error.
fastboot device will list the phone.
adb devices or adb devices -l does not list anything and adb shell says no devices/emulators found.
If I try to get into recovery mode I get a No command screen. I have been trying to take notes on what I did but there have been gaps in all the fiddling. I may have only flashed one partition the last time I tried putting back a stock boot image.
For USB drivers I downloaded the latest from Motorola. Was that sufficient for this?
Click to expand...
Click to collapse
If you want to get into recovery, boot into the bootloader than do
Code:
fastboot reboot fastboot
That'll boot you into fastbootd which has an option to go to the real recovery

DougPeterson said:
I double checked that I had USB debugging set, given I have reset a couple of times. I revoked all USB access and reinstalled the Rescue app. I still get the Failed to match connected devices error.
fastboot device will list the phone.
adb devices or adb devices -l does not list anything and adb shell says no devices/emulators found.
If I try to get into recovery mode I get a No command screen. I have been trying to take notes on what I did but there have been gaps in all the fiddling. I may have only flashed one partition the last time I tried putting back a stock boot image.
For USB drivers I downloaded the latest from Motorola. Was that sufficient for this?
Click to expand...
Click to collapse
If adb isn't showing any devices connected that would explain why the rescue software cannot find your phone. Perhaps you don't have the correct driver installed. Windows Device Manager shows the phone as a Motorola ADB Device on my PC.
View attachment 5061327
Another possibility is that you have multiple versions of adb on your PC. Older versions won't work but the adb.exe in "C:\Program Files (x86)\Rescue and Smart Assistant" works for sure. With your phone booted into android & unlocked, plug it into your PC. Do you see the "USB debugging connected" on the phone? If you don't I would re-check that USB debugging is enabled. If you do see the debugging notification, on your PC, open a command prompt and navigate to "C:\Program Files (x86)\Rescue and Smart Assistant". Run
Code:
adb devices
Does adb find your phone?

Redmi note 7 stuck in a bootloop. Can only access stock recovery, is it fixable?

Good morning!
While attempting to flash a stock MIUI 10 ROM into my Xiaomi Redmi Note 7, to downgrade back to Android 9.0 due to some app compatilibty issue, I messed up big time and my phone is now stuck in a loop where the screen turns on, nothing shows up, then it restarts, going off for a few seconds and turning on again.
Power Button + Volume UP successfully brings me to the stock recovery 3.0 from xiaomi.
Power Button + Volume DOWN fails to bring me to the fastboot mode.
If I select the Connect with MIAssistant in the recovery the phone will show up as "sideloaded" after using the command adb devices, but the MIPCSuite app does not see it and the command adb restart bootloader also fails to bring up the fastboot mode, it just gets stuck in the loop again.
More context on what went wrong and caused this: I followed an online tutorial to flash a rom using the MIFlash app, so I unlocked the bootloader and tried to flash the rom usin xiaomi's tool. I got a failed to check sparse crc error code and it went downhill from there when I tried to fix things reading multiple threads on the issue. I tried deleting some lines from the flash_all.bat file and tried to flash it again but then the flashing process went seemingly forever so I aborted the operation and now this loop happens. I tried a few more times but with no success.
The first time I tried to use the tool I used the clean all and lock option so I'm not certain if the miflash tool locked the bootloader regardless of the outcome of the flashing attempt.
Is there hope? Can I fix this phone if I only have access to stock recovery and nothing else (although it shows up in adb devices but can't get into fastbootmode) ?
Thanks a lot to anyone who took the time to read and possibly help.

Both ADB and Fastboot are Android-side launched by device's bootloader. If you can't enter Fastboot mode then my guess is there is something is wrong with curently installed Android.
BTW: If you lock device's bootloader then bootloader attempts to load device's Stock ROM.

jwoegerbauer said:
Both ADB and Fastboot are Android-side launched by device's bootloader. If you can't enter Fastboot mode then my guess is there is something is wrong with curently installed Android.
BTW: If you lock device's bootloader then bootloader attempts to load device's Stock ROM.
Click to expand...
Click to collapse
I see.
What can I do to try to fix this issue?

I finally managed to fix it through the Emergency Download Mode (EDL). It requires Xiaomi Authentication which I bypassed using this guide: https://www.droidwin.com/fix-mi-account-authorization-unbrick-xiaomi-edl-mode/
With that setup I flashed a stock rom using the MiFlash tool.

flashing pixel 2 without usb debugging

Hey guys, I need help flashing my Google pixel 2. It was off for a couple of months and now when I am trying to start it, its not booting without putting it on charge and even then it only shows the battery icon then the google icon and restarts (So a bootloop). But when I press and hold the power button and volume down key, it goes in the fastboot mode ( the one where all device information is shown with an Android Logo) (Pic att).
If I select Download mode, it just shows operation denied and if I select recovery mode then it goes to bootloop again. Also as far as I remember when I last used the phone, the usb debugging was turned off so please suggest what to do from here.

If you have USB debugging disabled with OEM unlocking off there's not much you can do. That's why I usually suggest if you're going to relock your bootloader keep oem unlocking enabled so you can flash the factory image if you run into problems. this has saved me a few times.
try downloading the platform tools and usb driver and running the unlock command, what message do you get? The first command you want to run is ADB devices to make sure that your device appears in the list and the command prompt. second command to run is fastboot reboot bootloader , If your phone restarts back into bootloader then you know you have the driver and fastboot /ADB installed and working properly. then go to the Android developer page and find the proper unlock fast boot command I think there's a different one for the Pixel 2.

Alekos said:
If you have USB debugging disabled with OEM unlocking off there's not much you can do. That's why I usually suggest if you're going to relock your bootloader keep oem unlocking enabled so you can flash the factory image if you run into problems. this has saved me a few times.
try downloading the platform tools and usb driver and running the unlock command, what message do you get? The first command you want to run is ADB devices to make sure that your device appears in the list and the command prompt. second command to run is fastboot reboot bootloader , If your phone restarts back into bootloader then you know you have the driver and fastboot /ADB installed and working properly. then go to the Android developer page and find the proper unlock fast boot command I think there's a different one for the Pixel 2.
Click to expand...
Click to collapse
Hey thanks for the update man. I know I should have kept atleast oem unlocking enabled. My fault.
Now I followed your instructions and the phone only shows under fastboot devices. But when I run ADB devices it comes as blank under list of devices attached. I still tried the fastboot reboot bootloader command but the phone just restarts with the battery charging icon flashing on screen and then going back into the fastboot mode. (pic of which I attached in the original post).
Any other ideas would be appreciated, else ill just take it to a service centre.

mayankggrwl said:
Hey thanks for the update man. I know I should have nlocking enabled. My fault.
Now I followed your instructions and the phone only shows under fastboot devices. But when I run ADB devices it comes as blank under list of devices attached. I still tried the fastboot reboot bootloader command but the phone just restarts with the battery charging icon flashing on screen and then going back into the fastboot mode. (pic of which I attached in the original post).
Any other ideas would be appreciated, else ill just take it to a service centre.
Click to expand...
Click to collapse
Mine shows blank also when running the devices command.
If you can run commands like "fastboot reboot bootloader" or "fastboot reboot recovery" etc and the device restarts, then platform-tools and driver is installed. I mean make sure you have the latest versions of both or else there's no point on going any further. An older version platform-tools will cause a bunch off issues so update that for sure.
what happens when you run any of these commands when your in the bootlaoder menu (where it says Fastboot and device state: locked) (after you've updated platform-tools, check the version by typing the command " fastboot --version" - 31.0.3 is the latest version)
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot oem unlock
If you can unlock your device, you can flash recovery/bootloader image and go from there. But it doesn't look good.

Alekos said:
Mine shows blank also when running the devices command.
If you can run commands like "fastboot reboot bootloader" or "fastboot reboot recovery" etc and the device restarts, then platform-tools and driver is installed. I mean make sure you have the latest versions of both or else there's no point on going any further. An older version platform-tools will cause a bunch off issues so update that for sure.
what happens when you run any of these commands when your in the bootlaoder menu (where it says Fastboot and device state: locked) (after you've updated platform-tools, check the version by typing the command " fastboot --version" - 31.0.3 is the latest version)
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot oem unlock
If you can unlock your device, you can flash recovery/bootloader image and go from there. But it doesn't look good.
Click to expand...
Click to collapse
Hey man, Thanks for the update.
Unfortunately none of these commands are working and yes I have the latest platform tools and drivers installed. Attaching image of the same.

mayankggrwl said:
Hey man, Thanks for the update.
Unfortunately none of these commands are working and yes I have the latest platform tools and drivers installed. Attaching image of the same.
Click to expand...
Click to collapse
yeah, it means the oem unlocking option is disabled in developer options. damn.
can you try logging into recover menu at all so you can update both boot slots A/B with the ota using adb update option in the recovery menu.
What about running a few fastboot commands to delete userdata and even switch boot slots. that Fastboot screen will show what slot you are booted in (either a or b). try switching slots and booting then?
fastboot --set-active=a (if you are in Slot-B)
fastboot --set-active=b (if you are in Slot-A)
After swithing slots, hit restart device and as soon as you see the Google Logo, hold volume down. If you can boot into Android, enable oem unlocking as soon as you can, don't even connect to wifi or whatever. Or try accessing Recovery mode after switching slots. Main goal is to try to access recovery to update ota and/or access Android to enable oem unlocking.
have you looked on xda for other fastboot commands to try? There's a few Unbrick posts on the Pixel subs - worth a try?
edit-- sorry, I deleted some of my comment by mistake, had to rewrite it/

Alekos said:
yeah, it means the oem unlocking option is disabled in developer options. damn.
can you try logging into recover menu at all so you can update both boot slots A/B with the ota using adb update option in the recovery menu.
What about running a few fastboot commands to delete userdata and even switch boot slots. that Fastboot screen will show what slot you are booted in (either a or b). try switching slots and booting then?
fastboot --set-active=a (if you are in Slot-B)
fastboot --set-active=b (if you are in Slot-A)
After swithing slots, hit restart device and as soon as you see the Google Logo, hold volume down. If you can boot into Android, enable oem unlocking as soon as you can, don't even connect to wifi or whatever. Or try accessing Recovery mode after switching slots. Main goal is to try to access recovery to update ota and/or access Android to enable oem unlocking.
have you looked on xda for other fastboot commands to try? There's a few Unbrick posts on the Pixel subs - worth a try?
edit-- sorry, I deleted some of my comment by mistake, had to rewrite it/
Click to expand...
Click to collapse
Okay so I tried switching slots. Currently active slot is A but it again shows error that slot chage is not allowed in locked state. Well was worth a try.
I tried almost everything to get into recovery menu as per my knowledge but cant. It just restarts back into the fastboot state or goes into bootloop.
I did a bit of searching before creating this thread but didnt found anything. Ill try again and see if someone has something similar.

mayankggrwl said:
Okay so I tried switching slots. Currently active slot is A but it again shows error that slot chage is not allowed in locked state. Well was worth a try.
I tried almost everything to get into recovery menu as per my knowledge but cant. It just restarts back into the fastboot state or goes into bootloop.
I did a bit of searching before creating this thread but didnt found anything. Ill try again and see if someone has something similar.
Click to expand...
Click to collapse
this thread is interesting:
{Solved} Pixel 2 Bricked, need help.
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the...
forum.xda-developers.com
specifically this comment:
{Solved} Pixel 2 Bricked, need help.
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the...
forum.xda-developers.com
download the full factory image (not ota) and extract it, and move the radio and bootloader images into platform tools folder and try flashing? But don't think you can.
Also, maybe try installing Skipsoft and see what commands you can execute from there? https://skipsoft.net/download/unified-android-toolkit-v1-7-2/
it supports the Pixel 2.
Not sure how the op in that thread above fixed his Pixel 2 with Skipsoft tool. His Device state said Locked in his screenshot on his post.
Also try draining the battery and see if it will boot into Recovery Mode at all. And check the other Pixel threads (like Pixel 3 XL) there's a few unbrick posts there also.
edit--try these commands
fastboot erase system
fastboot erase data
fastboot erase cache

Alekos said:
this thread is interesting:
{Solved} Pixel 2 Bricked, need help.
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the...
forum.xda-developers.com
specifically this comment:
{Solved} Pixel 2 Bricked, need help.
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the...
forum.xda-developers.com
download the full factory image (not ota) and extract it, and move the radio and bootloader images into platform tools folder and try flashing? But don't think you can.
Also, maybe try installing Skipsoft and see what commands you can execute from there? https://skipsoft.net/download/unified-android-toolkit-v1-7-2/
it supports the Pixel 2.
Not sure how those users in the thread flashed the bootloader image since I didn't think you could if the device state is locked, but worth a try.
Also try draining the battery and see if it will boot into Recovery Mode at all. And check the other Pixel threads (like Pixel 3 XL) there's a few unbrick posts there also.
Click to expand...
Click to collapse
Okay great !! Thanks for these. Ill go through that thread and will see if any of the listed methods work. Will also try that software. In a rush so will try these later on and then ill update you.