Hello all.
I know there are many threads of this kind but nothing worked for me. So Please help!
I unlocked my bootloader, installed TWRP and flashed SuperSU binaries. Everything was working fine.
Then I wanted to flash cm12 nightly. So i downloaded the zip file and also the Gaaps.zip file. I transfered them to the phone and booted to recovery.
1. Then instead of wiping cache i wiped the whole system i.e factory data reset. So then i tried reboot it says NO OS INSTALLED! do you want to continue? After that "Your phone is not rooted. Install SuperSU? As i don't have the SuperSU files so it just reboots to the bootscreen and stays there. I can go to the recovery and fastboot mode.
2. then i booted to recovery and went to adb sideload. I have the ADB files on my desktop and pasted the ROM.zip file to the folder.
3. Then i tried the command adb sideload ROM.zip with my phone connected. But then a lot of coding appears in the cmd window and phone stays at adb sideload.
4. When i connect my phone to my pc in recovery It comes up as "One" in the disk drives. I open it and it has a folder named TWRP and inside thata file. Nothing else. The good thing is I have a nandroid backup of my device when it had SuperSU binaries.
*the "One disappears when I go to ADB sideload in my phone*
So can I transfer the backup to my phone in a separate folder named "Backups" and install it via restore in TWRP? Or do have to do something else?
Please help! Please! :crying:
You're already getting help for this here:
http://forum.xda-developers.com/showthread.php?t=3044924
Transmitted via Bacon
Related
i have a slight problem. i grabbed the ubuntu touch alpha and went in to recovery, loaded it (according to thread instructions) but ended up with a bootloop.
in the end i thought "lets just put another rom back on for now" and then realised i had deleted the other rom from the sdcard! so i'm stuck with it not booting in to ubuntu, and not able to get another rom on as it doesn't boot in.
can i connect to the internal sdcard area myself by plugging the usb in to the pc or something?
i have twrp loaded as recovery
thanks
ah, TWRP adb sideload to the rescue!
problem
my problem is stuck in boot screen after i did super wipe full what should i do? i have cwm 5.5.0.4. i try flash from sd put it says no files found
partti86 said:
my problem is stuck in boot screen after i did super wipe full what should i do? i have cwm 5.5.0.4. i try flash from sd put it says no files found
Click to expand...
Click to collapse
The issue, Superwipe wipes the internal /sdcard/ and also this is where it flashes from.
You need to boot to recovery and then use ADB to push files to the sdcard.
If you have never used ADB, it can be a bit daunting.
First, you need adb from the Android SDK. It is a big file for the few you need. I have a copy of the relevant ADB files here: https://db.tt/b9dQ6xzp
Unzip this to c:\adb folder on windows. If you are using Linux, it should already have adb in the /usr/bin/ folder.
Next, you need the Universal Naked Drivers: http://forum.xda-developers.com/attachment.php?attachmentid=1934814&d=1367674531
Unzip these to c:\universal_naked_drivers
Boot to CWM and then plug in your USB cable. It should show a new device found. It may find 2, an MTP and then there should be another either Unknown device or an Android ADB device. Right click and update the driver. Be sure to search for driver, then tell it you want to pick from a list. Hit the Have Disk button and then hit the browse button and browse to c:\universal_naked_drivers and hit OK. It should show you a driver to select and hit OK. If you are using Win 8, there is an additional step that is required to used non-signed drivers.
Once the driver is updated, download the zip file you want to flash on your PC. I assume it is a ROM.zip file for this example. Place this file in the c:\adb folder and call it ROM.zip (can be named something else, but this is what we will use for this example).
Now, open a command prompt and execute the following:
Code:
> [B]c:[/B]
c:\> [B]cd c:\adb[/B]
c:\adb> [B]adb devices[/B]
It will probably say some messages about the daemon is not running, restarting adb.
Then it should show a list. There should be some numbers followed by "recovery"
If no devices are shown, check that your ADB device is showing in the Device Manager.
Once you see it in the adb devices list, continue:
Code:
c:\adb> [B]adb push ROM.zip /sdcard/[/B]
successfully pushed xxx bytes
c:\adb>
At this point you should now see the ROM.zip file on the internal storage in CWM to allow you to install it.
Choose to install the file then reboot (not to recovery). You have to let it flash the file (progress bar will show). Once the screen goes black and the progress bar disappears, it should now boot to your ROM..
If your ROM requires a custom kernel and/or GAPPS to be flashed, use the same procedure to push your kernel.zip and GAPPS.zip to the /sdcard/ directory.
mk2media said:
ah, TWRP adb sideload to the rescue!
Click to expand...
Click to collapse
Can you explain what you did please? what is adb sideload?
Describing my problem :
Since yesterday my OPO did some random reboots. I was running Paranoid Android and it worked perfectly...
Yesterdayevening after it rebooted another time, my OPO didn't start at all... It seems that my bootloader won't load the OS.
This morning, I did a complete wipe and I've put the stock ROM from the CM site back on my OPO ( XNPH33R signed boot).
-Fastboot works
-Recovery works
-Bootloader won't load OS. ( only the One Plus logo pops up (not the bootanimation)). After that it reboots over and over...
Update 1 17:30 5/10/2014 :
I'm in a bootloop, I have no ROM. I have the TWRP recovery. And the bootloader is LOCKED.
So I tried to unlock the bootloader with the toolkit for the OnePlus one. ( I tried it also manually with cmd).
----WHAT IT DOES in CMD/ Phone-------
In CMD : " OKAY [0.012 s]
Finished. total time : 0.012 s
OPO : It opens up my TWRP recovery but it does not unlock the bootloader
Update 2 19:52 5/10/2014 :
I've been able to unlock the bootloader...
with the command " fastboot oem device-info" , I received :
Bootloader tampered : True
Bootloader unlocked : False ( because the toolkit only did " fastboot oem unlock " , I did an adb sideload with a zip "OnePlusOne-OnlyBootloaderToggle" from the thread
http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912. Now my bootloader is back UNLOCKED.
I hope the bootloop will stop when I do a factory / reset.
10:40 6/10/2014 :
I tried several times to flash stock roms from the official site / from the forum. None of them 'work'.
Can someone please help me?? He still bootloops!!! How frustrating thazt is,I tried everything from threads on the forum. Nobody is ansering my thread. Any reason for that ?
My suggestion is this: grab one of the recovery flashable versions of CM11S from here, boot into your TWRP recovery and use adb to push the ROM zip to your phone, then use the install function in TWRP to flash it.
To push the zip to your phone you first need to put it in your adb/fastboot folder (wherever you have adb.exe and fastboot.exe located on your PC), make sure your phone is booted into TWRP and connected to your PC, open a command prompt from within your adb/fastboot folder (shift + right click anywhere in the folder, then select open command prompt here), and issue this command:
Code:
adb push <name of file.zip> /sdcard/
*Please note the '<' and '>' symbols are not included in the command.
From there just flash the ROM like you would flash any other ROM.
Transmitted via Bacon
Failure with E:
timmaaa said:
My suggestion is this: grab one of the recovery flashable versions of CM11S from here, boot into your TWRP recovery and use adb to push the ROM zip to your phone, then use the install function in TWRP to flash it.
To push the zip to your phone you first need to put it in your adb/fastboot folder (wherever you have adb.exe and fastboot.exe located on your PC), make sure your phone is booted into TWRP and connected to your PC, open a command prompt from within your adb/fastboot folder (shift + right click anywhere in the folder, then select open command prompt here), and issue this command:
Code:
adb push <name of file.zip> /sdcard/
*Please note the '<' and '>' symbols are not included in the command.
Transmitted via Bacon
Click to expand...
Click to collapse
Pushing the zip into sdcard :good:
Installing the zip gives a message about E:
example :
something with E: path
E: unable to wipe
E: error executing updater binary in zip 'sdcard/cm11.0... .zip
Proberly more
Are you sure you're attempting to flash one of the recovery flashable zips? What's the full filename?
Transmitted via Bacon
timmaaa said:
Are you sure you're attempting to flash one of the recovery flashable zips? What's the full filename?
Transmitted via Bacon
Click to expand...
Click to collapse
cm-11.0-XNPH33R-bacon-signed
Links
1. Recovery flashable zips of the complete ROMz:
XNPH22R
XNPH25R
XNPH33R
From your link
EDIT-----
1. I had flashed the stock recovery back.
2. Did a factory reset
3. Wiped cache
4. Wiped media
5. Flashed TWRP back
6. ADB push zip in /sdcard/
7. Flashed the zip SUCCESSFUL after these steps
I still have a bootloop
Have you tried to format your internal sd card and flash your zip. Remember if you format though you will lose everything on your sdcard. Make sure you backup everything first if you want to try this. Also if you do this you will have to push your zip back to the phone
Who can even solve this?...
playya said:
Have you tried to format your internal sd card and flash your zip. Remember if you format though you will lose everything on your sdcard. Make sure you backup everything first if you want to try this. Also if you do this you will have to push your zip back to the phone
Click to expand...
Click to collapse
My internal storage was already formatted. I just have the TWRP and the zip on my phone.
[Q] In the TWRP recovery menu in 'Advanced' what has to be between Copy Log to SD and Terminal Command? There is a blank spot ,there should be button normally?
How is it even possible i have nothing but the recovery and the zip and I still got a bootloop...
Is there somebody that knows something else that i can try?
Is it possible to flash perhaps with odin?
VictorByttebier said:
My internal storage was already formatted. I just have the TWRP and the zip on my phone.
[Q] In the TWRP recovery menu in 'Advanced' what has to be between Copy Log to SD and Terminal Command? There is a blank spot ,there should be button normally?
How is it even possible i have nothing but the recovery and the zip and I still got a bootloop...
Is there somebody that knows something else that i can try?
Is it possible to flash perhaps with odin?
Click to expand...
Click to collapse
definitely not odin thats Samsung my friend. Partition SD Card is whats missing in TWRP for you. I asked about formatting internal because a similar thing happened to my friend. We had to format internal then adb push recovery and rom and all was well again. If you have tried this recently then my bad but if you have not it wont hurt to try it again in that order
format internal
adb push recovery
adb push rom
reboot
Take a look in here as well http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
Bootloop fixed
It finally worked!!! How weird that i already found a zip like on the thread but with XNPH33R and also with the persist and recovery.img and flash-all etc... but it didn't work.
Now i just have to update from the settings
At beginning I was convinced that a bootloop could be fixed with factory/reset would do it. Like it always worked on my previous smartphone.
Thank you playya and timmaaa for the responses!:good: You are awesome! See me sitting here with a
Hello
So here is my problem :
I made a backup of my xt1032 (motoG) with CM13 with TWRP. I pulled the TWRP file in /sdcard on my PC to not accidentaly delete it.
Before restoring my save, I wiped my internal storage, data, system, dalvikcache and cache. Then i wanted to push my backup from my PC to my sdcard (or anywhere on my phone), so i entered this :
Code:
adb push TWRP /sdcard/TWRP
Nothing happended, CMD.exe was stuck after jumping a line, I waited for 1 or 2 hours... nothing. So i tried to push in an other place my backup by entering this in CMD :
Code:
adb push TWRP /TWRP
But it is the same :/. Do you know what can I do? My phone is blank and I can only access to fastboot and recovery. I tried to adb sideload a stock ROM and CM13, but it does not work...
Thanks a lot ! :fingers-crossed:
Ok it works, I reinstalled SDK android !
I don't know if it could have worked if i just uninstalled/reinstalled the platform tools with SDK Manager, I didn't try.
I think I had some trouble with it because I remember I installed the last adb version manually on internet...
So this thread can be closed
hey guys,
I was on stock 8.1 oxygen 5.1.8 rooted magisk with exposed installed, everything worked fine !
Untill I flashed https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/8-0-8-1-t3822594 I flashed the first zip file (8.0-8.1 black theme), after restart the phone is stuck in the oxygen bootscreen. Just to be safe before flashing I also put the uninstall zip file, so I flashed the uninstall zip file, but the phone is still stuck in the oxygen boot screen.
The big problem is, I have some data on my phone which i which to retrieve, I can enter into twrp but when connecting to the pc, the pc does not find my op6 drive. How can I fix this, the data is really important on the op6 which i would like to retrieve to my pc.
I hope someone can help me out here.
TWRP doesn't support MTP for now. So use:
adb pull /sdcard
It will download all files from Your internal storage to Your PC.
Just make sure that You have minimal adb installed on Your PC, and then run that command in PowerShell/CMD or Terminal.
ProtoDeVNan0 said:
TWRP doesn't support MTP for now. So use:
adb pull /sdcard
It will download all files from Your internal storage to Your PC.
Just make sure that You have minimal adb installed on Your PC, and then run that command in PowerShell/CMD or Terminal.
Click to expand...
Click to collapse
thnx for response, but could you just tell me in steps what I should do to retrieve my internal data without moving all the files from the phone to pc, the most important files are only the pictures and videos I shot. Is there a way to select specific folders that I would like to transport to my pc ?
There's an mtp enabled unofficial twrp version that you could boot from fastboot:
https://forum.xda-developers.com/oneplus-6/development/recovery-twrp-3-2-2-0-touch-recovery-t3813317
comicbookguy72 said:
There's an mtp enabled unofficial twrp version that you could boot from fastboot:
https://forum.xda-developers.com/oneplus-6/development/recovery-twrp-3-2-2-0-touch-recovery-t3813317
Click to expand...
Click to collapse
thnx but i am already transfering all the files from my 128gb through the adb pull, I already extracted around 55gb, I think in one hour it should be done.
Anyways, I am really gratefull for the help I received, I hope to see a stable twrp with mtp ^^,
I accidentally formatted all partition and now only have a TWRP. The TWRP only shows the start screen when i go to recovery.
Adb devices show me the device detected. I did a adb push and moved the stock rom 5.1.11 and my twrp recovery to the sdcard using the command adb push. I am struck here because i cannot get to the twrp screen which gives you option to install/wipe etc.
Can somebody please guide me if there is a way to recover or install the .zip files I have copied to sdcard. Thanks in advance
You need to fastboot flash the default stock rom, and then re root/install TWRP etc etc
Thank you for your response. Will that be adb fastboot flash stock.zip ? I am not sure if this would mess it up hence please confirm. Also, will it work if i use the fastboot to install twrp again and then flash the stock rom using its menu.
SachinGopal said:
Thank you for your response. Will that be adb fastboot flash stock.zip ? I am not sure if this would mess it up hence please confirm. Also, will it work if i use the fastboot to install twrp again and then flash the stock rom using its menu.
Click to expand...
Click to collapse
You need to go to this thread... https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Download the version of OOS you want (5.1.11) and unzip the contents in to a folder and run the flash-all.bat file and let it install to all partitions. Just follow this instructions in the thread and you will be fine.
Thank you so much for your response, but when I run this command I am getting " Waiting for device" option. I am only able to boot into twrp. I see the teamwin loading screen and its struck there. I am able to run adb commands and adb device shows the device details. I was also able to push the stock rom.zip through adb push command to /sdcard.
D:\OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT>flash-all-partitions-fastboot.bat
Do you want to wipe all the data ( Reccomended )[Y/N]?y
< waiting for any device >
Thank you so much it worked when I tried. Grateful . Will donate the Dev for that bat script.
SachinGopal said:
Thank you so much for your response, but when I run this command I am getting " Waiting for device" option. I am only able to boot into twrp. I see the teamwin loading screen and its struck there. I am able to run adb commands and adb device shows the device details. I was also able to push the stock rom.zip through adb push command to /sdcard.
D:\OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT>flash-all-partitions-fastboot.bat
Do you want to wipe all the data ( Reccomended )[Y/N]?y
< waiting for any device >
Click to expand...
Click to collapse
You need to be in fastboot mode.
Either adb reboot bootloader from inside android or from a powered off phone, hold Volume Up and power on.