I installed the Android Lollipop 5.0.1 GB OTA after flashing the Stock GB 4.4.4 firmware last night then flashed TWRP 2.8.3 and Aero Kernel. Now I'm thinking of selling my phone to upgrade to the second generation Moto G thus requiring me to reset the phone entirely, how would I go about this without bricking my phone? (Phone is XT1032)
I would flash back to stock 4.4.4 and OTA to 5.0 so the biyer doesn't have the ripple effect on the phone.
I had a phone with stock Telus 5.02 and I was able to downgrade to stock 4.4.4. Just don't try to flash motoboot.img.
Don't forget to flash a new logo too so the buyer doesn't see the unlocked bootloader warning.
So how would I go about doing that? Do you have a thread I could follow the steps of?
Related
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
emarld2011 said:
Here's the scenario:
I converted Moto G XT1033 4.4.4 to GPE 4.4.2
Then upgraded to GPE 4.4.4 and GPE 5.0.1, both by OTA
GPE 5.0.1 OTA ended up in softbrick
So now I cannot repeat the process beacause of the new bootloader, GPE 5.0.1 OTA brought with itself. And that bootloader would cause a hardbrick if I tried GPE 4.4.4 OTA on the device now
Questions: (No question is related to the other)
Would I be able to install Stock Lollipop OTA when I get one on 'Stock rom'? (I can revert to Stock 4.4.4) Would Stock Lollipop OTA mess up with the current bootloader, GPE Lollipop OTA has installed?
Is there any way I could flash Lollipop Stock image later, when it's available?
What can I do to set things right with the 'bootloader messup' that's caused right now?
Thanks, in advance!
Click to expand...
Click to collapse
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
GI0\/\NNI said:
You are another who has made a stupid mistake, you should HAVE READ MY THREAD!
You need to wait untill the Lollipop Factory images are published, then we can get a blankflasher and restore your bootloader.
Once your bootloader is working again, you can flash Lollipop without problems.
You need to wait 1 or 2 months.
Click to expand...
Click to collapse
Nope. I did read your thread after softbrick. And that's why I didn't install any OTA's after v5's.
I flashed 4.4.4. It's not an OTA!
I'm currently running 4.4.4 on 5.x bootloader.
Now what I'm asking is,
Would I be able to install 5.x OTA when I get it?
Before the factory image and all that thing.
PS: 5.x hasn't arrived for general public in INDIA yet. What I was trying was Brazil OTA.
Hi all,
About a month ago or so I updated my Moto G 2013 from 4.4.4 GPE to 5.0.1 GPE.
Then I rooted it using Chainfire Autoroot.
What I didn't know back then was that CF auto root screws your stock recovery.. (with all due respect to this great developer)
Auto root also prevents my from installing custom recoveries. (They just won't work).
I faced the same problem on my Nexus 7 2013. That problem could easily be solved by flashing again stock ROM image.
But since there is no 5.0.1 GPE image available for the Moto G it seems impossible to fix this..
Unluckily, Motorola doesn't allow us to downgrade to KitKat or Jelly Bean. (Yes.. I know there are ways to downgrade by skipping some commands, but there are several reports that it will cause screen flickering because the new Lollipop bootloader doesn't work properly on stock Kitkat ROM.)
So I guess I'm pretty stuck right know.
I guess factory resetting my phone would already hard brick the phone (because of the bricked stock recovery by cf auto root)
I would like to have Lollipop 5.0.1 GPE with TWRP recovery, so I can install custom kernels etc.
Do I have to wait for the Lollipop image? Or are there other ways of reaching my goal?
Any idea when we can expect the image to be released?
Thanks in advance!
I installed stock KK on a my Telus moto g with the L bootloader and the flickering was still be there. Just don't flash the motoboot.img file in fastboot.
I always found that the easiest way to get root is to flash supersu from a custom recovery.
I recently soft bricked my phone (Moto G 2013 falcon) downgrading it from Cyanogen 12 to stock 4.4.4 (Argentina), so after many tries I ended up booting in stock 4.4.4 Europe retail (210.12.40.falcon_umts.EURetail.en.EU).
I try to upgrade that to 5.0, but the OTA update fails in the middle of the installation. Then I tried to download the OTA file manually and install it via stock recovery, but it fails too.
Is there any other way? Or do I have to convert it to 4.4.4 stock Brazilian or some other variation with more OTA files available?
Thanks in advance,
Are you unrooted, running stock recovery, and stock ROM?
Yes: unrooted, stock recovery, stock ROM. My bootloader is unlocked though, so I can easily root the phone or change the recovery.
I already tried with a (supposed) official 5.0 OTA for Europe using stock recovery, but it didn't work ("update failed" or so).
I have the Telus xt1032 8GB. Not sure if it runs or you need the same Telus firmware but I was able to flash back to stock 4.4.4, update Motorola apps, and take the OTA update via wifi. I did this three times on my xt1032 in the past 2 weeks without any problems.
Ok, so here's the thing: I have a US retail XT1032.
I flashed the GPE Kitkat into my phone to get the Lollipop update back when there was no Lollipop for US retail. When I had the GPE Kitkat, I did the OTA to Lollipop 5.0.1.
After that, I tried to OTA to 5.1, but the upgrade stopped suddenly and no upgrade was made. And here's where I screwed up.
A friend of mine told me that, from Lollipop onwards, you couldn't upgrade unless you had a locked bootloader. So I tried to lock it. The problem is that I couldn't find the 5.0.1 GPE firmware, so I foolishly thought that I could use the 5.1 directly. That rendered my phone stuck at bootloader. So I downgraded to Kitkat and now it works.
I'd like to get back to Lollipop, but when I try to flash the GPE 4.4.4 ROM, it fails at every step. I don't want to try the Motorola OTA because I'm afraid something may go horribly wrong again, and because I don't want the Motorola firmware but the GPE.
Is there a way to do that, or am I stuck in Kitkat?
You can go here and see if you can find the appropriate firmware for your phone.
Wipe, flash and reboot.
BTW, OTA updates will fail every time if you do not have a completely stock system including stock recovery.
Firmware Image Index: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Custom Recovery Flashable zips: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
I have reflashed(clean install= wiped data/cache/system) 5.0.2 Asian lollipop stock rom,which doesnt upgrade bootloader i.e im on kitkat bootloader. after flashing, i lost root access and i'm on stock recovery. And Now I got 5.1 OTA, can i install it or not? Because while turning on my device, i get custom image first and then motorola animation,i get this custom image because i have made it by moto g boot logo creator + flasher.
[TIA]
pagadalachetan said:
I have reflashed(clean install= wiped data/cache/system) 5.0.2 Asian lollipop stock rom,which doesnt upgrade bootloader i.e im on kitkat bootloader. after flashing, i lost root access and i'm on stock recovery. And Now I got 5.1 OTA, can i install it or not? Because while turning on my device, i get custom image first and then motorola animation,i get this custom image because i have made it by moto g boot logo creator + flasher.
[TIA]
Click to expand...
Click to collapse
Yes you can flash the OTA update without any issues. Considering your bootloader is 41.18 you wont be having any trouble and obviously since you clean flashed 5.0.2 surely your bootloader must have updated itself automatically
thuva06 said:
Yes you can flash the OTA update without any issues. Considering your bootloader is 41.18 you wont be having any trouble and obviously since you clean flashed 5.0.2 surely your bootloader must have updated itself automatically
Click to expand...
Click to collapse
Thanks thuva... My bootloader version is 41.08 I.e KitKat bootloader