[Q]No Internal Storage,Cant intsall Rom,PLSS HELP - General Questions and Answers

I have a THOMSON MID 1002 tablet. I flashed the stock ROM successfully twice a long ago. Now, I've faced the following problem all of a sudden-
1. Whenever I shut it down, it restarts and resets the device; never shuts down.
2. The internal storage and internal SD shows 0.0B (I have 1GB internal storage,16GB internal SD, external SD not inserted)
3. No app can be installed (maybe due to internal storage being 0B)
I cant install the stock ROM anymore, it now says , cant wipe data,cant wipe media,cant wipe cache.I found that there's a stock recovery manager named "reboot manager" which has the option- Hot Reboot,Reboot recovery,Reboot bootloader,power Off.
Pls see the attached image for my storage settings and the picture of what I get during installing stock ROM (vendor's official firmware) -
I m very new in installing n flashing, should I install a custom recovery (CWM) and custom ROM? Pls help me someone. U can check the tablet by googling - Thomson MID1002

bump

bump plsss help

Related

Unformattable internal SD memory with a problem of bootloop

Yesterday i tried to flash my I9003 with Odin but I messsed up and it showed the black screen of death...now it's fixed. But I have a new problem:
after I put on the phone it starts normally and get to the menu but after 10 min it blocks and then goes into bootloop mode. I tried to go into recovery mode to reset the phone and format the internal SD but it tells me that reset is OK and that it's impossible to format the internal memory (use ui menu ...).
Even with the settings menu it's impossible to format the memory ( it tells that it's OK but the memory is not empty ).
I flashed the phone again but the wallpaper is the same none of the applications was deleted.
how can I fix this please ??
I saw a way to switch internal and external memory but it needs froyo 2.2.1 , Can I do this ??
I need your help please !!!!!!!!!!!
Myriam77 said:
Yesterday i tried to flash my I9003 with Odin but I messsed up and it showed the black screen of death...now it's fixed. But I have a new problem:
after I put on the phone it starts normally and get to the menu but after 10 min it blocks and then goes into bootloop mode. I tried to go into recovery mode to reset the phone and format the internal SD but it tells me that reset is OK and that it's impossible to format the internal memory (use ui menu ...).
Even with the settings menu it's impossible to format the memory ( it tells that it's OK but the memory is not empty ).
I flashed the phone again but the wallpaper is the same none of the applications was deleted.
how can I fix this please ??
I saw a way to switch internal and external memory but it needs froyo 2.2.1 , Can I do this ??
I need your help please !!!!!!!!!!!
Click to expand...
Click to collapse
Just flash a new firmware of your choice.
Xxkpq is most favoured.

[Q] what am i doing wrong

hi
i have a optimus 3d p920 on orange (uk) (just unlocked to any network)
android version- Gingerbread 2.3.5
software version- V20d june 2012
everytime i try and put a rom on, the phone goes into boot loop (lg logo then unlit black screen)
i root using megatron
install ROM manager
install clockwork recovery 6.0.1
I download zip
plug in phone
cody zip to sd card but NOT external sd card (filemanager shows it as /mnt/sdcard)
go on ROM manager
click on boot in recovery
already done back up of original rom saved on sd card clockworkmodrecovery file
i wipe data/format
i wipe cache partition
then go i go into advance then wipe cache dev
then i go back on to menu
click on install rom from sdcard
find the zip then click yes to install
says its installed then i click reboot and then it becomes stuck
sometimes it would install CM10 or PACMAN (after turning it on and off for a while) then after about 5 mins would reboot its self and get stuck again
so i will then unplug battery, hold Vol up connect usb and open up lg support tool and then recover as carnt get into cwm recovery and install backup from sd card.
i have noticed in the mount/format tab that only the /data is mounted and not (as follows)
/external sd card
/sdcard
/system
/emmc
as they have mount next to them...
its driving me mental
so please help
(if posted in wrong section then sorry im new)
(also posted on optimus 3D general forum section just reposted on here just in case no one goes on that section for ages so again sorry if wrong)
Try to use cwm 5 oder twrp 2. I heard that cmw6 sometimes makes trouble.
Iv had cwm5 before and that bricked too. i have even tried cwm touch but no look
even when i click reboot in recovery on ROM Manager it bricks it.
is it a common problem with ROM Manager and p920?

Help system memory problem

I downloaded roehsoft ram expander from the play store and started to use, but I don't know what I did, but I have messed up my phone I selected swap dir/partition and selected !partition! Mmcblkop26-1.15gb, after I had selected and pressed ok my phone restarted and went to boot animation which was really laggy and it restarted again came up with HTC screen then boot animation when my phone finally had loaded it had factory reset it self, I set it all back up and I found that my internal memory was really low it was total space 128mb which is incorrect I went into my file manager and I have access to my SD card three ways mnt/sdcard, storage/primary/legacy, storage/sdcard0. The file manager now by default goes to storage/primary/legacy which it should go to mnt/sdcard.
I am really confused at what to do I tried reinstalling the Rom and that did not work I think I may have swapped the partitions or something but my sdcard is not partitioned. Every time I reboot my phone it has factory reset itself so it can't hold on to data if you reboot.
Please help I hope you understand all of this and it's a quick fix.
I have also found out that recovery does not recognize data as a partition it just displays
System
Cache
Sdcard
Recovery says E: unknown volume "/data"
Please someone help I have tried looking around but what keywords do you put in google. Recovery doesn't know volume so it says it's formatted but it's not I am so confused.
Pac man Rom 23.0 4.2.2

sd card not supported after CWM

i have successfully install the ROM as per xda suggestion but after that i how the my phone not support the sd card its show like "insert the sd card" before that its working what can i do ?
Can you just give me the link to rom amd guide on xda
cwm problem
http://androidxda.com/download-lenovo-stock-rom-models
I have follow the below steps
Reset factory
Reset coach
Storage and mount
Reset system
Reset data
Reset cache
Advanced. Dalvik cache
Than I select the zip from SD card n after rebooting I successfully install the ROM but its not support the SD card when I open the camera or filebrower its show SD card not inserted n also if I reboot the system than after phone not working than I have to do remove the battery and than connect again than after its working. So what can I do?
Which model you have
Lenovo s920 row
First of all check in your ststem foldef that you have an app called media handler is present in your device or not
Where can I found any path I try but I don't know where is it present.
Path is system/app or system/priv-app
No there is no any folder like system
What
Pleaae do not say that ever never again in your device there is a folder named syatem and your android runs from there only please check it again
Sorry
I found that using es file I cross check media app and media PRI app but there a no any app called media handler I show one app called media pro cider.apk and many others
After installation of ROM when I m trying to reboot phone its not rebboted just vibrated again n again n displaying nothing if I remove the battery than connect to again than only its responding so what can I do?
Problem with reboot function in power menu.
Try this and tellnme
Power off your device.
Andbafter 1 min switch onn it again and tell me what happens
suppose my phone is now "ON" after that if i switch off than i press the power button than its "ON" but suppose if i press "vol+ + vol- + power button" for going to CWM than its not responding just vibrating if i remove the battery n reconnect than only i go into the cwm n after going there if i select the reboot system than phone is reboting but its not switch on just vibrating agian n i have to remove the battery again.
mean boot loop or restart will not take place by the restart option
Its problem with the way recovery is installed.
Do you followed each and every step of guide carefulley.
lenovo s920 row
plzzz help me sir
Factory reset your device from recovery and do not powwr it just gobto recovery again and reinstall your rom after wiping catch and dalvic ok
i have done below steps
formating factory
formating cache
formating dalvik
than i install the zip from sd
its install succesfully
its rebooted auto maticall but after that only vibrating nothing responing
Check that the sd card is working properly.
If not then do this.
Nackup all sd card data on pc and format the sd card from your android device. Restart and see itbwill start working.

how to repartition the internal storage (storage partition bricked)

Hey! Today I made a clean installation of the newest Android N build 2.33 via flashtool. As usual I wiped everything and before flashing the ftf I wiped everything via TWRP which was on the old Marshmallow build installed. After installing nougat I flashed a patched kernel and booted directly into the twrp recovery before the first boot! there I wasnt able to find my internal storage partition! In the file manager there was suddenly no sdcard0, only sdcard1 which is the external sd card. So headed to the wiping options and wanted to wipe the internal storage but I only got a red error log line saying something with "-o". Then I plugged the Z5 into my computer for transfering the deodex patch while the phone was in recovery and the cmputer detected a 8.4GB internal storage partition, but normally it should be 22GB useable storage! how can I fix this?!?! I can boot up the xperia though!
sorry about any writing mistakes I use my laptop for 1 year now but I still hate the steelseries keyboard, sometimes the space bar isn't working and I have to apply more pressure than I want to during smooth writing....

Categories

Resources