How to run monitor mod on my xolo a500s ips.
I have downloaded bcmon but when I open it shows
no firmware : detected
install version : 0
install fw version : 0
and If i try to go to "Status" in the top left corner, bcmon crashes.
♦XOLO A500S IPS :
* OSAndroid OS, v4.2 (Jelly Bean)
* ChipsetMediatek MT6572W
* CPUDual-core 1.3 GHz Cortex-A7
* GPUMali-400
* WLANWi-Fi 802.11 b/g/n, hotspot
Please help and sorry for my bad english.
Related
Hello developers,
I am using Qmobile Noir A50 with root access. I am in searching for custom rom for my smartphone. But i can't find any cusom rom. Kindly guide me which rom will be perfect for my smartphone.
Mobile Specification are listed below
Baseband version: MAUI.11AMD.w12.22.SP.V15
Kernal version: 3.4.0
Ram: 512MB
Rom: 4GB ROM
Processor: 1 GHz Dual Core
3G: Not
Display: 800x480
Camera: 5 MP with LED Flash
It will be very nice of you to guide me.
hey anyone, I want to ask about porting qualcomm
What is this device
[Rom Port]
OS : Android OS, v4.1 (Jelly Bean)
Chipset : Qualcomm MSM8225 Snapdragon
CPU : Dual-core 1.2 GHz Cortex-A5
GPU : Adreno 203
A can for porting to in
[Rom Base]
OS : Android OS, v4.3 (Jelly Bean)
CPU : Snapdragon Dual Core 1.2 Ghz Cortex A7
GPU : Adreno 302
If you can, could you tell me the way to his porting. A file folder or what should i take from port rom into base rom
Thank you if you tell me
HI... First of all I'm sorry for my english, and I noobie in this forum. PIease help me, i need a firmware or a custom rom which is suitable for my child hardbrick tablet.
This is specification :
models: mfc142f
os: android 4.1.1
Processor: 1GHz
ROM: 4 GB
RAM: 512 MB
LCD: CAPACITIF 7 "resolution: 800 x 480
WIFI: 802.11 b / g / n
dual camera 0.3 MP, front and back
abi: armeabi-V7A
abi2: armeabi
board products: rk2928sdk
manufacturers: rockchip
building description: rk2928sdk_eng 4.1.1 JRO03H 20,130,930.160150 release_keys.
please help me...
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Click to expand...
Click to collapse
Greetings and welcome to xda. There doesn't appear to be any custom rom for your device but if you ask your question here
http://forum.xda-developers.com/android/help
the experts there maybe able to help you
Good Luck
Sawdoctor
Hello guys..
I was working these last days to find an official firmware for the "i.t.works TM1007" tablet, but unfortunately, it seems that there is none ..... here is some technical information of i.t.works TM1007 :
---------
---------
General specifications:
Storage Capacity (GB): 8
Memory (Ram): 512
Operating system: Android
OS version: Android 4.4 KitKat
Picture :
Screen Size (cm): 25.65
Screen Size (Inches): 10.1
Horizontal Resolution (pixels): 1024
Vertical resolution (pixels): 600
Format: 16: 9
Configuration:
Telephone function: No
Keyboard: No
Fingerprint Reader: No
TV Tuner: No
Built-in webcam: Yes
UMTS: No
GPS: No
Processor :
MT8127 Quad Cortex A7 à 1,3 GHz
Graphic:
GPU: Mali 400 MHz
------------
------------
PS: I tried flashing it with "Wink Highway 10.1 WiFi" firmware using Sp flashtool but it doesn't match, the flash operation aborts everytime i tried,
please guys someone could help me with an official firmware or some kinda clone tablet' one
Thank you in advance......