Related
So basically I found out just today we have Cyanogenmod 10.2 >.<
I downloaded the Joilaroi version, flashed it in TWRP 2.6xx and then suddenly "E: Error in updating binary script" did a bit of googling and found out that it's a common problem with TWRP > 2.3.3.0
So I was about to downgrade it to 2.3.3.0 or temp boot into CWM. Connected my phone to my laptop and went to bootloader, then did Adb devices....the list was empty.
Reinstalled HTC drivers, used different USB port...nothing.
TL;DR : Phone doesn't get recognized in Bootloader mode, Can't flash ROM, Can't replace recovery. Help!
AIndoria said:
So basically I found out just today we have Cyanogenmod 10.2 >.<
I downloaded the Joilaroi version, flashed it in TWRP 2.6xx and then suddenly "E: Error in updating binary script" did a bit of googling and found out that it's a common problem with TWRP > 2.3.3.0
So I was about to downgrade it to 2.3.3.0 or temp boot into CWM. Connected my phone to my laptop and went to bootloader, then did Adb devices....the list was empty.
Reinstalled HTC drivers, used different USB port...nothing.
TL;DR : Phone doesn't get recognized in Bootloader mode, Can't flash ROM, Can't replace recovery. Help!
Click to expand...
Click to collapse
Why don't you flash with terminal emulator?
Just put recovery.img in the root of your sdcard
Open terminal type
su
cd sdcard
flash_image recovery recovery.img
That's it
Sent from my gt-1900 using xda premium
Taha Haq said:
Why don't you flash with terminal emulator?
Just put recovery.img in the root of your sdcard
Open terminal type
su
cd sdcard
flash_image recovery recovery.img
That's it
Sent from my gt-1900 using xda premium
Click to expand...
Click to collapse
That's what I'm doing now but I need a proper solution :/ Basically Windows won't recognize my phone through fastboot. I'd rather not keep installing CM9 again and again after a failed flash, you know?
AIndoria said:
That's what I'm doing now but I need a proper solution :/ Basically Windows won't recognize my phone through fastboot. I'd rather not keep installing CM9 again and again after a failed flash, you know?
Click to expand...
Click to collapse
install htc drivers and make dure you cleared the all registry and files from your previous installation and connect your device
open cmd and go to the folder where you placed adb and type command
adb kill-server =>it will close all adb processes running at that time
adb start-server => it will start new adb process
adb devices=> to reconize your device
if it shows your device then through fastboot command flash the recovery
but make sure you have all neccessary binary files in that folder for adb and fastboot
hit thanks if helped
AIndoria said:
That's what I'm doing now but I need a proper solution :/ Basically Windows won't recognize my phone through fastboot. I'd rather not keep installing CM9 again and again after a failed flash, you know?
Click to expand...
Click to collapse
You can try installing the newer Drivers.
Else your usb port may be broken. that is also a possiblity
Does adb push work in recovery or fastboot mode. I've seen a lot of forms use this method but it did not work for me. In recovery mode the device is not been recognized when i type in adb devices, it throws no devices found. but all the adb commands works fine during normal run.
blackuse said:
Does adb push work in recovery or fastboot mode. I've seen a lot of forms use this method but it did not work for me. In recovery mode the device is not been recognized when i type in adb devices, it throws no devices found. but all the adb commands works fine during normal run.
Click to expand...
Click to collapse
You need to enable ADB mode in recovery for it to work.
fastboot is for bootloader mode only.
Adb push works in recovery, not fastboot. You need to get the drivers installed while your in recovery. Ate you on Windows pc? Open device manager and you'll see a device with an exclamation make on it. You need to installs the drivers for that. Go to browse for drivers and there will be an option to install from a list on the computer. Find the android adb drivers
Sent from my Nexus 5 using XDA Free mobile app
Just a note:
adb doesn't work in stock recovery other then when using adb sideload.
Custom recoveries support all adb commands.
El Daddy said:
Just a note:
adb doesn't work in stock recovery other then when using adb sideload.
Custom recoveries support all adb commands.
Click to expand...
Click to collapse
Good point
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Adb push works in recovery, not fastboot. You need to get the drivers installed while your in recovery. Ate you on Windows pc? Open device manager and you'll see a device with an exclamation make on it. You need to installs the drivers for that. Go to browse for drivers and there will be an option to install from a list on the computer. Find the android adb drivers
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
i did as per ur instruction and now it shows the device in adb devices but i'm not able to perform any commands. i use CWM.
blackuse said:
i did as per ur instruction and now it shows the device in adb devices but i'm not able to perform any commands. i use CWM.
Click to expand...
Click to collapse
Please elaborate on "i'm not able to perform any commands"
rootSU said:
Please elaborate on "i'm not able to perform any commands"
Click to expand...
Click to collapse
only "adb devices" works when i use adb push it does not throw any error but the file is not found in the device.Is there any restriction to the commands used in the recovery mode.
blackuse said:
only "adb devices" works when i use adb push it does not throw any error but the file is not found in the device.Is there any restriction to the commands used in the recovery mode.
Click to expand...
Click to collapse
Put the file you're trying to push in the same folder as abd.exe. Open a command window in that folder. It's sounds like you have a path issue and adb is not finding the file
Sent from my Nexus 5 using XDA Free mobile app
blackuse said:
only "adb devices" works when i use adb push it does not throw any error but the file is not found in the device.Is there any restriction to the commands used in the recovery mode.
Click to expand...
Click to collapse
Could you screenshot the cmd prompt please?
the adb push works fine in normal run. but none of the command seems to work during recovery.adb commands works fine even in fastboot mode
blackuse said:
the adb push works fine in normal run. but none of the command seems to work during recovery.adb commands works fine even in fastboot mode
Click to expand...
Click to collapse
What recovery are you using? If you're using cwm, it mounts /sdcard incorrectly as /data/media instead of /data/media/0
Mount data and ls /data/media
Sent from my Nexus 5 using Tapatalk
rootSU said:
What recovery are you using? If you're using cwm, it mounts /sdcard incorrectly as /data/media instead of /data/media/0
Mount data and ls /data/media
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
YES i'm using CWM . "Mount data and ls /data/media" how do I do that
blackuse said:
YES i'm using CWM . "Mount data and ls /data/media" how do I do that
Click to expand...
Click to collapse
in recovery, go to "mounts and storage" and press "mount data".
Then in command prompt type
Code:
adb shell
to get into adb shell
Then type
Code:
ls /data/media
Thats LS in lower case and yes, it is case sensitive.
This will list the contents of /data/media - which is the location cwm uses as /sdcard. This hasn't been /sdcard since android 4.1.2 though.... I bet ls lists all those missing files you've been pushing.
This is one reason you should use either Philz or TWRP. Antiquated settings in CWM
blackuse said:
YES i'm using CWM . "Mount data and ls /data/media" how do I do that
Click to expand...
Click to collapse
Instead of push /sdcard use push /data/media
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Instead of push /sdcard use push /data/media
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thats the same.. push /data/media/0
Although just change recovery from cwm and continue to use /sdcard
Otherwise Nandroid backups will go missing too
Sent from my Nexus 5 using Tapatalk
rootSU said:
Thats the same.. push /data/media/0
Although just change recovery from cwm and continue to use /sdcard
Otherwise Nandroid backups will go missing too
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i tried out lots of adb push commands and finally understood "/sdcard/" which is supposed to be "/data/media/0/" is still "/data/media/ in CWM and yes all my CWM nanodroid backups are located in "data/media/CWM". how do i permanently make CWM to use "/data/media/0/" for sdcard
and i assume adb reboot does not work in recovery mode
blackuse said:
i tried out lots of adb push commands and finally understood "/sdcard/" which is supposed to be "/data/media/0/" is still "/data/media/ in CWM and yes all my CWM nanodroid backups are located in "data/media/CWM". how do i permanently make CWM to use "/data/media/0/" for sdcard
and i assume adb reboot does not work in recovery mode
Click to expand...
Click to collapse
You can't with cwm. Use philz or twrp though twrp won't be compatible with your existing backups.
Sent from my Nexus 5 using Tapatalk
I wiped the system thinking it was part of the system factory reset in TWRP but i didnt know that it would result in it saying NO OS INSTALLED. i read other similar threads about this problem but dont exactly understand what to do and how to restore my phone. i have a nandroid backup but its on my pc and not the internal storage on the phone. im fairly new to this so those replying, please explain exactly what to do. Im so scared about what to do now :crying::crying::crying:
Don't be scared its common and very, very easy to fix
Now I don't use TWRP so I have no idea of the directory structure so I can't advise you exactly.
But what you will essentially do is use adb push to get the files on your phone.
Click the link in my signature to go to the sticky roll up thread. All the important threads are linked there. Y
In that thread you'll quickly find my adb info thread. This should be most of what you need to know
Sent from my Nexus 5 using Tapatalk
First relax, your phone is not ruined. I assume you have a custom recovery. You're going to have to either side load a rom zip using adb or adb push a rom zip onto your phone and flash it in recovery.
Edit, OP you'll want to push the rom to /sdcard/Download. That'll put it into the folder twrp defaults to look for it.
Sent from my Nexus 5 using XDA Free mobile app
Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
http://www.koushikdutta.com/post/universal-adb-driver
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
https://developers.google.com/android/nexus/images
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
raptir said:
]
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
Luckily its easier install adb and fastboot than the ask method. Just go to the thread mentioned earlier and use the 15 second installer
OP, no matter what you'll need run that installer
Sent from my Nexus 5 using Tapatalk
All these guys have it spot on! I just wanted to mention that when you install a ROM system gets wiped automatically as this is a parameter in the zip's updater-script.
So in other words there is really no reason to wipe system manually. Just let the install process do it for you. If u wipe system manually and then you realize you do not have a ROM zip or a nandroid only ADB can save you. So this way you can save yourself a headache
raptir said:
Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
\
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
I downloaded everything and ran the flash-all . bat file but its currently been on < waiting for device > for a while now. i think it didnt detect the phone although it is connected through the USB :/
thauri said:
I downloaded everything and ran the flash-all . bat file but its currently been on < waiting for device > for a while now. i think it didnt detect the phone although it is connected through the USB :/
Click to expand...
Click to collapse
Did you or did you not read my adb and fastboot thread?
And WHY are you going for the last resort first???
You really need to chill out and read things because I don't think you're thinking straight
Sent from my Nexus 5 using Tapatalk
raptir said:
Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
rootSU said:
Luckily its easier install adb and fastboot than the ask method. Just go to the thread mentioned earlier and use the 15 second installer
OP, no matter what you'll need run that installer
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
yeah i did download the 15 second ADB installer but my computer isnt detecting the phone connected when i ran the flash-all . bat file.
1) you need to read the whole of my thread. There are drivers to install
2) Still dont understand why you're running flashall bat when you can just adb push your backup to your sdcard. You know you lose all your data when you do that?
Sent from my Nexus 5 using Tapatalk
rootSU said:
1) you need to read the whole of my thread. There are drivers to install
2) Still dont understand why you're running flashall bat when you can just adb push your backup to your sdcard. You know you lose all your data when you do that?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
ok yes im reading your thread and doing the ADB commands. i have a question though, the multi-line input for the code to ADB push goes in cmd right? how is that possible?
Yes
Type one line, press enter, type another line, press enter
Sent from my Nexus 5 using Tapatalk
rootSU said:
Yes
Type one line, press enter, type another line, press enter
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
when i press enter after adb shell and mount data, it says data failed : Device or Resource busy
thauri said:
when i press enter after adb shell and mount data, it says data failed : Device or Resource busy
Click to expand...
Click to collapse
If "mount data" shows device or resource busy, then that usually means it is already mounted.
rootSU said:
If "mount data" shows device or resource busy, then that usually means it is already mounted.
Click to expand...
Click to collapse
i did everything but in the last part, it doesnt transfer the recovery files to the phone
Edit: The files are transferring successfully but only one at a time.
EDIT 2: All the necessary files were transferred but the TWRP recovery mode isnt detecting it as a restore option
Messing up is scary but it's a great opportunity to learn. I think you'll get through this just fine.
thauri said:
i did everything but in the last part, it doesnt transfer the recovery files to the phone
Edit: The files are transferring successfully but only one at a time.
EDIT 2: All the necessary files were transferred but the TWRP recovery mode isnt detecting it as a restore option
Click to expand...
Click to collapse
It must be in the exact location twrp needs to see it.
Sent from my Nexus 5 using Tapatalk
rootSU said:
It must be in the exact location twrp needs to see it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I did, I put it in the backup folder in TWRP where all the other backups usually were
thauri said:
I did, I put it in the backup folder in TWRP where all the other backups usually were
Click to expand...
Click to collapse
Take a new backup, then delete everything in the new backup folder and move everything from your old backop into the new backup folder,
So for example
Code:
adb shell
mount /data
cd /data/media/0/TWRP/backups
ls
^^ This should list the contents... You should see your old backup and your new backup (which will be mostly empty).
Lets pretend your new backup folder is 22222222 and your old backup folder is 11111111
Code:
rm -Rf 222222222/*
mv 111111111/* 222222222
The first command is a remove (recursive) of the contents of the new backup. second command mvs contents of old backup into new backup folder,
Try that.
I don't know TWRP so my assumptions of the path may be incorrect
Someone else posted twrp default path as /sdcard/downloads - try that.
I screwed up trying to restore and now it says the phone is not rooted and has no OS installed on it. I still have access to the custom recovery if that helps. I have tried using ADB and Fastboot but it does not seem to be working. I need to know asap because it is for my dad and he travels a lot. He needs a phone. Please any help is appreciated.
1.Flash twrp
2. Go to adb sideload
3. In the terminal type adb sideload filename.zip
The ROM will flash and that's it.
If you need it back to stock just google "nexus 5 factory image" then download the latest one and follow the instructions given by google.
Also are you running linux (which distro) or windows just so I know what to tell you if that doesn't work
First of al: It's best to not use Windows 8 since there have been some driver incompatibilities and I'm not sure if they have been completely fixed yet.
Install 'Universal Naked Driver' and 'Minimal ADB and fastboot'. Both can be found here on xda.
Download the latest factory image for hammerhead from Google website. Extract the downloaded file twice and copy over everything to your 'Minimal ADB and fastboot' install dir.
Double click the flash-all.bat while your phone is in bootloader mode.
This will COMPLETELY reset your phone (all personalbdata will be wiped). Only the bootloader will stay unlocked.
awsumatt said:
1.Flash twrp
2. Go to adb sideload
3. In the terminal type adb sideload filename.zip
The ROM will flash and that's it.
If you need it back to stock just google "nexus 5 factory image" then download the latest one and follow the instructions given by google.
Also are you running linux (which distro) or windows just so I know what to tell you if that doesn't work
Click to expand...
Click to collapse
When trying step 3, it says cannot read sideload.
The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?
What does the terminal say as an error? And are you running Linux, Mac, or windows?
experience7 said:
The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?
Click to expand...
Click to collapse
Yes that is exactly how i entered it but with the file name of course. Although I did try your method but i don't see any file called flash-all.bat.
So just gonna ask again, what message did you get in the terminal?
Did you extract it twice? There should be a tgz file at some point... this one can be extracted as well (using 7-zip for example)
experience7 said:
The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?
Click to expand...
Click to collapse
okay nevermind my last comment. Now it says fastboot is not recognizable internal or external command. Press any key to exit
After you copied all the files into the Minimal ADB and fastboot folder the flash-all.bat should be in the same directory as fastboot.exe. Is this the case?
Try adb kill-server then (I'm a little rusty with windows) su adb start-server
experience7 said:
Did you extract it twice? There should be a tgz file at some point... this one can be extracted as well (using 7-zip for example)
Click to expand...
Click to collapse
Okay after I run the flash-all.bat, it just hangs at waiting for device
Install the 'Universal Naked Driver', reboot your computer and try again.
Again: The phone has to be in bootloader mode (you have to see the green android)
experience7 said:
Install the 'Universal Naked Driver', reboot your computer and try again.
Again: The phone has to be in bootloader mode (you have to see the green android)
Click to expand...
Click to collapse
I've decided to take the loss on this one. I just do not have time for this. I'll just go get it replaced. Thank you so much for the help. I'll definitely use XDA for more of my android problems in the future. Thank you again and to everyone who replied to this thread.
sbecerra407 said:
I've decided to take the loss on this one. I just do not have time for this. I'll just go get it replaced. Thank you so much for the help. I'll definitely use XDA for more of my android problems in the future. Thank you again and to everyone who replied to this thread.
Click to expand...
Click to collapse
Install this(fastboot + adb): http://forum.xda-developers.com/showthread.php?t=2588979
Download the file for Nexus 5: https://developers.google.com/android/nexus/images
Extract the file
Connect phone to pc in bootloader mode
Double click in flash all script
Wait for it to finish
sbecerra407 said:
When trying step 3, it says cannot read sideload.
Click to expand...
Click to collapse
ofc... you need to ENABLE sideload on twrp itself..
Thread cleaned.
Let's keep it on topic guys,
So I finally undated my PC from Ubuntu 12.04 to 16.04. The good new is I have full MTP access to my G3 now. However, ADB is no longer recognized. ADB and Fastboot are located on a separate drive from the OS, so I am trying to run the same file from the same HD. Any suggestions?
You need to run adb in root. Are you doing that?
Sent from my SM-T530NU using XDA-Developers mobile app
How are you trying to use ADB? It doesn't work when your phone is on fastboot mode
Tel864 said:
You need to run adb in root. Are you doing that?
Sent from my SM-T530NU using XDA-Developers mobile app
Click to expand...
Click to collapse
I did try that without success even though I successfully ran ADB without root with 12.04. Only Fastboot needed root.
For some reason the file is not recognized as an executable file. Below is a screen copy:
Code:
$ ls
adb fastboot twrp-osprey-3.0.0-r2.img
commands.txt twrp-osprey-2.8.7-r5.img twrp-osprey-3.0.2-r1.img
$ adb
The program 'adb' can be found in the following packages:
* adb
* android-tools-adb
Try: sudo apt install <selected package>
$
Henriquefeira said:
How are you trying to use ADB? It doesn't work when your phone is on fastboot mode
Click to expand...
Click to collapse
I have not even got that far. See post above, "adb" is not recognized. I would rather not install the adb development package if I can avoid it.
Its fastboot flash recovery not adb flash
Henriquefeira said:
Its fastboot flash recovery not adb flash
Click to expand...
Click to collapse
The commands is not my issue. I have a list of commands I have run successfully many times. My issue is with the new OS (in the same PC) not recognizing adb. When I boot to the old OS, no issue, back to the new OS, command is not recognized..
My list of commands is as follows:
Code:
adb devices
adb reboot bootloader
sudo fastboot devices
sudo fastboot boot twrp-osprey-3.0.2-r1.img
Henriquefeira said:
Its fastboot flash recovery not adb flash
Click to expand...
Click to collapse
Re-reading your reply, I think you mis-read my code box. Next to the dollar sign my command "ls". Below is the OS response. Next $, command is "adb", and below the OS response.
I figured it out. So in Ubuntu 16.04 my command needs to be:
"./adb"
where in 12.04 "adb" worked.
MrTooPhone said:
I figured it out. So in Ubuntu 16.04 my command needs to be:
"./adb"
where in 12.04 "adb" worked.
Click to expand...
Click to collapse
This implies execution from the current directory... Are you sure you don't have multiple 'adb' executables installed? Check the command 'which adb' to see.
Sent from my MotoG3 using Tapatalk
acejavelin said:
This implies execution from the current directory... Are you sure you don't have multiple 'adb' executables installed? Check the command 'which adb' to see.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Pretty sure I had multiple 'adb' executables in 12.04.
i really could use some help friends im having problems with adb on windows when my device is on adb can see it of course
C:\adb>adb devices
List of devices attached
ZY22236P94 device
the problem is when its in bootloader mode adb cant seem to see it i have all drivers installed and i cant understand why im getting this error i want to install a recovery and i cant i currently have know recovery installed and i really need to rest my phone cause of a lot of software issus this is the message that get when bootloader mode
C:\adb>adb devices
List of devices attached
it shows nothing attached on windows devices manager it shows motorola adb interface connectad and running fine so i cant understand what im doing wrong please i really need some help here mates
steffano said:
i really could use some help friends im having problems with adb on windows when my device is on adb can see it of course
C:\adb>adb devices
List of devices attached
ZY22236P94 device
the problem is when its in bootloader mode adb cant seem to see it i have all drivers installed and i cant understand why im getting this error i want to install a recovery and i cant i currently have know recovery installed and i really need to rest my phone cause of a lot of software issus this is the message that get when bootloader mode
C:\adb>adb devices
List of devices attached
it shows nothing attached on windows devices manager it shows motorola adb interface connectad and running fine so i cant understand what im doing wrong please i really need some help here mates
Click to expand...
Click to collapse
adb doesn't work in bootloader mode, that is when you use fastboot... I think you should review the process involved in installing recovery.
Sent from my MotoG3 using Tapatalk