Related
Hi i was trying to install a patch for a certain game and saw this error
Detected problems with app native libraries
(please consult logs for detail)
libQt5Core.so: unauthorized
access to "libcrypto.so"
libQt5Core.so: unauthorized
to access "libssl.so"
is there a fix for this? or should i wait for the update for it to be fixed?
Phone Model: Mi4-c
ROM: MIUI globeROM 8.3 / 7.4.6
Bootloader: Unlocked
Installed recovery: twrp
New User, so apologies if this post is in the incorrect format :fingers-crossed:
Sorry if TL,DR: but the more information on my issue I give you the less chance your advice encounters any variables.
Recently got into ethical Hacking / pentesting.
Wanting to use a nethunter ROM on my Nexus 5 so when I inevitably break something its replaceable and not my gaming rig.
I did the following:
- Installed Nexus Root Toolkit on my laptop.
-Unlocked the boot loader from this first.
-Then installed Root Permissions and TWRP
These initial steps seemed to have worked.
Boot loader marked as unlocked, SU app installed upon booting new ROM, checks as rooted, and TWRP was being interacted with on the next step.
I then selected the 'advanced' menu in the Nexus Root Toolkit.
And flashed the .zip file for the hammerhead nethunter build version 3.0
There was advice to do several things during this step which I have ignored due to not understanding the process.
- installing gapps. I believe the gapps version for hammerhead is 6.0 however it's listed purpose was to allow access to Google play apps which I have so I discarded this step.
- installing over cryogenmod 14.1 as my Android build is marshmallow 6.0.1. This is the advice I received on the official Kali site, that Nethunter was designed to be used over CM, and perhaps my issue as I flashed it over the stock OS for the phone.
Once the nethunter zip file was flashed through the root Toolkit, I rebooted my phone and logged on. After the initial setup I had all of the applications and the background for the KL Nethunter build, however I encounter a major issue trying to set them up.
When I go to set up the Chroot. I select download option, and then "full Chroot install".
I am then prompted with a message saying bad handshake / server error and I am unable to get past this stage.
The error message is " javax.net.sslSSL handshake exception" no valid pins found in chain.
I am not using a mobile carrier only Wi-Fi.
This is killing me because obviously it means I basically don't have nethunter lmao :laugh: really not funny but any human input you guys can offer with this challenge would be immensely appreciated. I want to begin hooking this up to a TP Link Wi-Fi receiver and I'm extremely demoralised by the fact I can't complete what is essentially " the easy bit ".
Disclaimer - I will follow any suggested links to the letter but for the record. I have combed YouTube. Google. XDA and several other sources for a fix to this. I am aware I need a Kali " arm-hf" file however can't find a repository for such a download or I would download it to the Sd and try to mount it manually!
I just pretty much completed the same process on my nexus 7 (2012) which resulted in me being stuck at the same point. Doing a search has lead me here for possible resolution to our issues.
"The error message is " javax.net.sslSSL handshake exception" no valid pins found in chain."
UPDATE:
I was able to locate the file within the zip file we had flashed to install kali.
Full path was /data/local/kalifs-full.tar.xz
I manually extracted and copied to /emulated/sdcard and ran the chroot wizard and chose to install from sd, it's extracting now.
I'll update once extraction has completed (this tablet has the slowest writes, ever..)
Here is the link to kali chroot.
8point6 said:
I just pretty much completed the same process on my nexus 7 (2012) which resulted in me being stuck at the same point. Doing a search has lead me here for possible resolution to our issues.
"The error message is " javax.net.sslSSL handshake exception" no valid pins found in chain."
UPDATE:
I was able to locate the file within the zip file we had flashed to install kali.
Full path was /data/local/kalifs-full.tar.xz
I manually extracted and copied to /emulated/sdcard and ran the chroot wizard and chose to install from sd, it's extracting now.
I'll update once extraction has completed (this tablet has the slowest writes, ever..)
Click to expand...
Click to collapse
build.nethunter.com/kalifs/kalifs-latest/kalifs-i386-full.tar.xz
I see they dropped support for the nexus 7 2012, likely due to lack of space. I was able to get a full extract done, but hope enough info has been relayed to get you and anyone else past the error we had received. If I pick up where I left off, I'll try to provide an update on this, tabled for now.
Code:
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
SailfishOS 3 for Photon Q
Continuation from 2.0 thread to keep most important information in first post. Thanks to vevgeniev for initial port, without it I would never buy Photon Q.
Repo with my apps is added to image. Packages can by installed via terminal:
Code:
devel-su zypper in "package name"
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Installation
Download and flash cm-11-20150626-SNAPSHOT-XNG3CAO1L8-moto_msm8960_jbbl.zip via twrp-3.0.2-0-asanti_c.img according to ordinary cm instruction. Use ext4 filesystem for /data partition. Boot to android and make sure everything works.
Download SailfishOS 4 image (open browser in private mode if onedrive ask you to login) and flash it over cyanogenmod. It's compressed tarball so installation may take even 10 minutes.
OTA
Read about Stop Releases and make backup using TWRP
Code:
/usr/share/sfos-moto_msm8960_jbbl-adaptation/upgrade.sh
# after reboot execute pkcon refresh to update all repositories
For any issues with upgrade.sh script download more up-to-date version, add --verbose argument or execute commands from real-upgrade.sh manually: https://build.sailfishos.org/packag...bl:4.4.0.68/sfos-moto_msm8960_jbbl-adaptation
At first boot tracker might slow down phone and eat a lot of storage. If it's too resource hungry move your media files out of device or create .nomedia empty file to exclude particular directory from tracker. Then force reset it:
Code:
tracker reset --hard
Custom Bootlogo
vevgeniev created a custom bootlogo:
Instruction how to use it
Known issues
Half screen mirror glitch occurs sometimes. Blank/unblank display fixes it
Sometimes removing files does not have any effect, i.e. free space doesn't increase and sdcard can't be unmounted. Could be easily triggered by mtp or dd usage. For sdcard access use FileZilla (SFTP).
QProcess:startDetached can hang randomly. Workaround added to fingerterm. Looks like it's bug in Qt and it is not photon q specific: https://together.jolla.com/question/202337/bug-fingerterm-terminal-freezes-after-opening-new-window
There are no 2.XG, 3.XG network indicators.
glReadPixels() return empty content in some cases. This means no screen recording, screenshots and thumbnails in browser. Workaround for screenshots added to lipstick.
All bugs at first boot are features.
FAQ
Q: How to run apk?
A: It's not android, you can't
Q: Can I switch between hardware keyboard layouts?
A: Default xkb layout switch shortcut: "shift + sym". You need to also set second keyboard layout:
dconf write /desktop/lipstick-jolla-home/layout "'us,ru'"
Click to expand...
Click to collapse
In newer releases layouts can be enabled in settings and switched via "shift + space"
Tips
Fast way to restart lipstick:
shift + tab + k
Alt + Tab like switching (if you have sailfishos-alttab-patch installed):
OK + tab
To disable volume media keys:
dconf write /apps/photonq-helper/mediaKeysEnabled 0
batt_health can cause reported battery capacity decrease which I am not sure works correctly at least on my aging battery. It's disabled since 3.3.0 in 2 places in /init.target.rc. Therefore btry will not report Aged Capacity anymore.
To use h264 (hardware accelerated) decoder in youtube set in about:config media.mediasource.webm.enabled to false
user name is still 'nemo' instead 'defaultuser' even for latest releases
Changelog
4.4.0.68
* Partially usable browser. Javascript doesn't cause crash on almost all sites like in 4.0-4.3 sfos. Tabs in landscape mode are unusable.
* Using browser probably breaks video encoding/decoding ('vid_dec_open() max number of clientslimit reached' in dmesg). Killing minimediaservice/browser usually helps.
* Disabled sailjail, and enabled start up boosters back.
* Few general sfos bugs more (see patchmanager catalogue for my patches)
4.3.0.15 - No for daily use, just required Stop Release
4.2.0.21 - No for daily use, just required Stop Release
4.1.0.24 - No for daily use, just required Stop Release
4.0.1.48
Broken browser
3.4.0.24 - Latest usable version
Fix memory leak when taking screenshot
Add workaround for remembering wlan state after reboot in airplane mode
Media keys works only in locked screen
3.3.0.16
NFC pn544 plugin added
batt_health disabled in /init.target.rc
glibc 2.30, gcc 8.3
3.1.0.12
kernel: hold volume up/down to select next/previous song
droid-hal-init: disable mpdecision due to constant cpu usage
3.0.3.9
Patch glibc for 3.0 kernel
3.0.2.8
Handle system and data partition automatically
New methods to wake up sensors
3.0.1.11
kernel: Fix crashes caused by new firewall rules
kernel: Experimental multi LUNs support
droidmedia: Fix random audio/video fail in browser
usb-moded: Mass storage was dropped in upstream. Use patched one
Click to expand...
Click to collapse
XDA:DevDB Information
SailfishOS 3 for Photon Q, ROM for the Motorola Photon Q 4G LTE
Contributors
elros34, vevgeniev
Source Code: https://github.com/elros34?utf8=✓&tab=repositories&q=msm8960&type=&language=
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2018-11-23
Last Updated 2019-08-20
Thanks for maintaining this for our devices @elros34
I have been meaning to try Sailfish for some time on my RAZR HD (xt926) and i finally got around to it the other day only to find that it wont boot up.
As per the 2.0 thread i can flash CM11 and that will boot and work fine but once i flash Sailfish over the top it wont boot past the bootloader unlocked logo. I have tried both the xt907 and photonq zips but neither will boot.
The xt907 zip did shown some signs of something happening since the led would light up either orange or white but after leaving it for 45 mins with no other signs of life i gave up on it.
Please find attached a list of my device drivers using the following command:
Code:
ls -alR /dev
Are there any chances of this running on my xt926 ?
Thanks, so it has xt907 like partition table, you can't use photon q image. LED glowing means system is booting.
Boot to TWRP then:
Code:
rm /data/.stowaways/sailfishos/init_disable_telnet
Now reboot, connect phone to usb and telnet to it:
Code:
telnet 192.168.2.15 2323
In windows you can use putty but it's hard to copy logs from it.
Then wait a while so logs are complete and run:
Code:
dmesg
journalctl --no-page
logcat
evdev_trace -I
elros34 said:
Thanks, so it has xt907 like partition table, you can't use photon q image. LED glowing means system is booting.
Boot to TWRP then:
Code:
rm /data/.stowaways/sailfishos/init_disable_telnet
Now reboot, connect phone to usb and telnet to it:
Code:
telnet 192.168.2.15 2323
In windows you can use putty but it's hard to copy logs from it.
Then wait a while so logs are complete and run:
Code:
dmesg
journalctl --no-page
logcat
evdev_trace -I
Click to expand...
Click to collapse
Thanks @elros34
Please find attached the various logs from my xt926.
Note i'm still running Sailfish 2.1.3.7, i figured it would be easier to start with that but if needed i can re-run these on 3.0.0.8
I have no idea what most of it means for the most part but a few errors did stand out to me in particular
Code:
Dec 12 20:20:16 Sailfish systemd[1407]: Failed to start The lipstick UI.
Could this possibly explain why its not booting any further?
Lipstick fails to start because xt926 use different touchscreen driver. Change "/dev/touchscreen" to "/dev/input/event1" in /var/lib/environment/compositor/droid-hal-device.conf
Also paste output of:
Code:
udevadm info -a /dev/input/event1
elros34 said:
Lipstick fails to start because xt926 use different touchscreen driver. Change "/dev/touchscreen" to "/dev/input/event1" in /var/lib/environment/compositor/droid-hal-device.conf
Also paste output of:
Code:
udevadm info -a /dev/input/event1
Click to expand...
Click to collapse
Thanks @elros34 its working now after changing the touchscreen driver boots up fine. I'm not seeing any immediate issues but will see how i get on with it. First impressions are very good, a really nice os i'm actually surprised at how fast and fluid it is.
Here is the output of
Code:
udevadm info -a /dev/input/event1
Code:
sh-3.2# udevadm info -a /dev/input/event1
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/i2c-3/3-0048/input/input1/event1':
KERNEL=="event1"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/i2c-3/3-0048/input/input1':
KERNELS=="input1"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="melfas-ts"
ATTRS{phys}=="3-0048/input0"
ATTRS{properties}=="2"
ATTRS{uniq}==""
looking at parent device '/devices/i2c-3/3-0048':
KERNELS=="3-0048"
SUBSYSTEMS=="i2c"
DRIVERS=="melfas-ts"
ATTRS{drv_debug}=="Debug Setting: 0"
ATTRS{drv_reset}=="Reset: HIGH"
ATTRS{hw_irqstat}=="Interrupt line is HIGH."
ATTRS{ic_reflash}=="No firmware loading in progress."
ATTRS{irq_enabled}=="Interrupt: 1"
ATTRS{latency_debug}=="Latency Debug Setting: 0"
ATTRS{latency_times}==""
ATTRS{latency_values}=="Touch Latency Time: Average 0uS, High 0uS,0 interrupts of 0 were slow"
ATTRS{name}=="melfas-ts"
looking at parent device '/devices/i2c-3':
KERNELS=="i2c-3"
SUBSYSTEMS=="i2c"
DRIVERS==""
ATTRS{name}=="QUP I2C adapter"
I'll also see if i can convert some of the other xt925 and xt926 users for testing.
Absolutely love this - haven't had a single problem yet. Thank you so much elros34.
Could somebody check what "getprop ro.product.device" returns for xt926 or xt907 with sailfish installed?
mounting /dev/mmcblk0p39 on /data failes
Hi,
at first i would like to thank you for building SFOS3 for the Photon Q series, i bought another XT907 to finally get SF running on this pretty nice and tiny handset.
As @drkdeath5000 i stuck at the bootloader unlocked screen but with another problem as the touchscreen driver for his XT926.
I think it's a problem with the partition table here the error from /init.log
mount: mounting /dev/mmcblk0p39 on /data failed: No such file or directory
I followed the installation instructions you provided and flashed cm11, which is booting without issues. I already tried it with and without wiping dalvik/cache, with and without booting to cm11 first. So i would really appreciate your help. If i can provide some more detail just tell me.
Best regards
André
rkdeath5000 get further because he used old xt907 image, you can't use photon q image in XT907.
I have tried to support all devices in one image. I even prepared untested script to update kernel but need a nice way to distingnues between devices. No feedback so far.
Few days ago I came up with different an idea how to auto detect correct partitions in all devices but so far I am struggling with some serious issue in 3.0.2 so I am not sure when I will release it.
elros34 said:
Could somebody check what "getprop ro.product.device" returns for xt926 or xt907 with sailfish installed?
Click to expand...
Click to collapse
On my XT907 it returns scorpion_mini
Thank you for your fast response,
as you recommended Version Alpha3 is running but of course i would like to run SFOS3 So i would like to help you in any way possible.
Best regards
André
If you could test whether this image works (boots without issue and touchscreen works) then it would be great. This is image I just built with new method to detect correct partitions but without all needed patches for middleware so other bugs are not important for now.
Thank you so much! I can hardly tell you how happy you made me I always wanted i tiny handset running on SFOS and finally after i already had given up on that your rom make it happen.
I just started some basic testing on it, as i want to wait for the screen protector before starting to really use it so i'll give you a feedback on the rom later.
3.0.2.8 Released as OTA and new image probably for all moto_msm8960_jbbl devices.
Also I created new patch for Alt+Tab (OK + Tab key) like switching between windows. It's added to my obs repo.
So far the new version alpha9 installs without issues on the XT907. Right now i have just one problem, as in version alpha8 I'm not able to send text messages (SMS). I tried different sim cards from two different networks, so i think it's a problem within the ROM. How could i help you on this? Maybe collecting some logs?
What about Alpha3 or android? To boot android you don't have to flash whole system, just boot cm11 kernel via fastboot. Have you tried to set "Prefer 3G" in cellular settings?
To get most basic logs, reboot phone and try to send sms, then:
Code:
dmesg
journalctl --no-page
logcat -b radio
If it's something more serious then you will need to follow:
https://jolla.zendesk.com/hc/en-us/articles/203761078-How-to-collect-SMS-logs-
Thanks so much for 3.0.2.8 - works great. Really hope you're able to give us a 3.0.3 with the updated browser.
Don't know if you have any interest/knowledge on Maemo Leste or PMOS, but since you're the most knowledgeable person on the Photon Q, just wondered if you could hazzard a guess as to how possible it might be to get them working on this device further down the line?
Thanks again.
Yes, updated browser is tempting so I will definitely bring 3.0.3 when it will be available for ported devices.
Unfortunately I have never ported Leste or Postmarketos so I have limited knowledge here.
With Photon there are several issue like: no sim without modification and no flex cable to buy. Also we are stuck with android drivers and ancient 3.0 kernel with no chance for upstream. It means to run anything (in usable form) other than android we need libhybris. I think there are better devices with more active developers for these systems: droid 4 - have ongoing upstream efforts, Fxtec pro1 for sure will have 4.x or even 5.x kernel. That's why you will not find photon in actively supported devices in postmarketos or leste site.
- Leste use hildon-desktop (x window manager) so it would be probably not trivial to get libhybris based ui acceleration if it's possible at all. Is that os even daily usable?
- After a quick read of Postmarketos wiki looks like it support wayland based compositor like weston so it is a good sign. I was able to run libhybris accelerated weston in ubuntu chroot in sailfish. It has some touch issues but it may be because I run it nested in lipstick. From what I understand if device doesn't have upstream kernel then postmarketos requires ported halium and lxc containers. That might be not possible because of 3.0 kernel but you will never know until you try.
Take everything I said with a grain of salt and start porting. For halium you will probably need newer base than cm11. There are few important commits which are needed otherwise kernel will not work.
SMS issue could be general ofono bug: https://together.jolla.com/question...installing-3028/?answer=205366#post-id-205366
Jolla is focused on android8 base so older bases are neglected. Upstream libhybris is also broken for hybris-11 base.
The intention behind this thread is to share some experience of a little project where I try to migrate the Sony Xperia Shinano devices (based on Qualcomm MSM8974 chipset with a Broadcom BCM4339 wifi/bluetooth chip) from the old bcmdhd wifi driver to a close-to-mainline brcmfmac driver. I want to share the progress and status here, and maybe get some hints. It is work in progress, and for sure it still contains some mistakes - I haven't done something like this before and am still learning.
Why?
The Shinano devices are still maintained by the LineageOS, and some devices are currently on the official LineageOS 17.1 stream.
The kernel however is terribly outdated, based on msm-3.4
There are some wifi issues with all LineageOS-based ROMs since years, like weak 5GHz connections and non-working wifi in some countries. There are some hacks around that, but they work (afaik) by practically disabling the kernel-level regulatory system by e.g. setting a static country code like "DE".
I am curious if we can improve that by updating the kernel drivers and network/wifi components, and maybe also the firmware (to the latest release available from Broadcom, 6.37.34.43 ?) . I got the ideas from Sonyxperiadev/Loire (+ related platform config), the Linux Backport Project and other MSM8974 based devices.
Working so far:
Did a few tests only so far, STA with WPA2 and p2p (hotspot) seem to work
Wifi connection is stable on 2,4GHz on 00 world regulatory domain (tested on a Z3 and a Z3c)
5GHz manually setting a country code (could only test DE)
Switching countries / setting new regulatory domains is now working, too
Download speed looks OK to me, in my case at least better than before Download >60MBit, Upload >30 Mbit on some initial tests.
Not working yet:
WifiHAL (qcom-caf) does not work correctly. This may create multiple issues, tbd.
Connection bandwidth seems to be not reported correctly
I don't know if wowlan works (interrupts working?)
Stability: After 1-2 days without reboot wifi sometimes crashes but immediately reconnects. Reason not yet understood.
Patches & Picks
Kernel:
backported and configured brcmfmac, cfg800211 wireless configuration API and wireless network stack from linux-stable v5.8 by adopting the compatibility patches from the linux backporting project.
updated Shinano device tree, updated Z3, Z3c and Z2 (Z2 test needed!) defconfigs (unset bcmdhd and enabled brcmfmac) and removed board-sony_shinano-wifi.o in the arch-msm makefile
Note: the backported drivers and compatibility-patches are located in a separate backports/ subdirectory
Sorry, this is work in progress and contains some hacks, to be cleaned up later
--> https://github.com/LineageOS/androi...1...Tom1000:lineage-17.1-driver-backport-v5.8
Vendor blobs / device z3(c): removed proprietary firmware and replaced that by publicly available firmware for bcm4339 on linux-firmware.git
z3c --> https://github.com/LineageOS/androi.../lineage-17.1...Tom1000:lineage-17.1-brcmfmac
z3 --> https://github.com/LineageOS/androi.../lineage-17.1...Tom1000:lineage-17.1-brcmfmac
Shinano-common: Use qcwcn instead of bcmdhd WLAN device, serve wpa_supplicant_overlay.conf
--> https://github.com/LineageOS/androi.../lineage-17.1...Tom1000:lineage-17.1-brcmfmac
msm8974-common: raise wpa_supplicant version (unknown if we need that) and update sysfs node for MAC address
--> https://github.com/LineageOS/androi.../lineage-17.1...Tom1000:lineage-17.1-brcmfmac
As a follow up, the driver seems to work quite stable already. I still have issues with nl80211 private commands, as a mainline brcmfmac does not seem to accept command strings passed via a libnl control socket like this:
qcwcn/wpa_supplicant_8_lib/driver_cmd_nl80211.c
@vknecht : I've seen your backporting work for the Xperia X. How does this work for Loire with SODP? Does e.g. a "set country code request" work for you, and if so, can you give me a hint?
I need some feedback from people with a Z3/Z3c/Z3Dual to see if the new builds work in affected countries, where 5GHz wifi is not working on current custom ROMs like e.g. LineageOS 17.1. I would appreciate if you test one of the builds below and send me a full log.
WARNING: The following builds are for debugging purpose only. Do not use them as a daily driver, as they have SELinux disabled and create excessive log entries. This ROM is not stable, some features are not yet implemented.
Xperia Z3 (D6603):
lineage-17.1-20201227-UNOFFICIAL-z3.zip
drive.google.com
Xperia Z3c (D5803):
lineage-17.1-20201227-UNOFFICIAL-z3c.zip
drive.google.com
Xperia Z3Dual (D6633) Update 10Jan2021:
lineage-17.1-20210110-UNOFFICIAL-z3dual.zip
drive.google.com
Z3Dual build has SELinux enabled already
If possible, please follow these steps:
Install ROM with TWRP for Android 10 or Lineage Recovery for 17.1
If possible, factory reset the device. Be sure to get rid of all former Magisk modules which try to set country codes etc. (if applicable).
Make sure a a local SIM card is inserted.
Boot the device. Enable mobile data and enable wifi. Connect to a 5GHz capable access point or router.
Optional: Increase log buffer size. This may be required as the kernel is set to verbose logging, creating large logfiles. You can do this via settings/developer options or via adb:
adb logcat -G 8M
Get close to the access point or router, so that the device would prefer 5GHz over 2.4GHz.
Reboot the device and let wifi connect. Check if device uses a 5Ghz connection. (Ignore bandwith / speed for now.)
Create a logfile, e.g. with this command via adb:
adb shell logcat -d -b all > mylog.log
The logfile may contain private information, so I recommend not to post them public. Together with the ligfile I would like to know
a) Wifi 5GHz working?
b) The country in which you have tested this.
nice work bro.
i live in iran and in this build my Z3 Dual detects wifi networks while the sim card is also connected.
but in 10 Jan 2021 update my phone can't detect my router's wifi unfortunately while the previous build could do it without problems.
hotspot turns on on both 2.4GHz and 5GHz.
in this new build cellular network and data are working.
Thanks @TheShadowOfAGhost20 !
Can you please run a root shell (E.g. by connecting via ADB, run adb root, then adb shell) and then
$> iw wlan0 scan → scan for networks
and then look if your access point is found?
Furthermore, can you please check which WiFi channel this particular router ist set to, and if possible the bandwidth?
Mr.Tom_Tom said:
Thanks @TheShadowOfAGhost20 !
Can you connect via ADB, run adb shell and then
$> iw wlan0 scan → scan for networks
and then look if your access point is found?
Furthermore, can you please check which WiFi channel this particular router ist set to, and if possible the bandwidth?
Click to expand...
Click to collapse
i did that but got this error: "/system/bin/sh: iw: inaccessible or not found"
but i found the cause: my wifi channel was set to 12. i changed it and then got detected!
TheShadowOfAGhost20 said:
i did that but got this error: "/system/bin/sh: iw: inaccessible or not found"
Click to expand...
Click to collapse
Sorry I forgot to write that you have to do this as root, I edited the post accordingly.
TheShadowOfAGhost20 said:
i found the cause: my wifi channel was set to 12. i changed it and then got detected!
Click to expand...
Click to collapse
Tha sounds reasonable. However, Channel 12 should be usable in IR.
Mr.Tom_Tom said:
Sorry I forgot to write that you have to do this as root, I edited the post accordingly.
Tha sounds reasonable. However, Channel 12 should be usable in IR.
Click to expand...
Click to collapse
channel 13 has detection problem too. the others are OK
.sorry erroneous post
New buildsFeedbacks have been positive so far, so here are some updated builds.
Lineage Sources* as of 20 March 2021
Kernel sources* based on Linux 3.4.113 with backported wifi from 5.8.18 plus cherry-pick of the following changes:
bluetooth: fixed #ifdef'ed PM callbacks ("BTLowPower" wakelock) 50f16d16b32871c5ce97b029e68692008c848bb2
SELinux enforcing
Build as userdebug, normal loglevels
* For links to sources see 1st post. Z3Dual does not have official Lineage17.1 sources yet, bringup is in progress.
Xperia Z3 (D6603):
HiDrive
hidrive.ionos.com
md5: d7aaf1fea120df3e2aad10b3a2d32226
Xperia Z3c (D5803):
HiDrive
hidrive.ionos.com
md5: 456ff87441c3a63e8dc8c7a8d03bdf39
Xperia Z3Dual (D6633):
HiDrive
hidrive.ionos.com
md5: 1848681c82d608f3212f1ace621327cb
As always, feedback is welcome.
Has anyone found a bug/installed this latest build yet? lineage-17.1-20210320-UNOFFICIAL-z3dual
Finding this super stable.. The only thing that does not work for me is the advanced boot recovery that goes back into system, But that's a known issue.
Mr.Tom_Tom said:
New buildsFeedbacks have been positive so far, so here are some updated builds.
Lineage Sources* as of 20 March 2021
Kernel sources* based on Linux 3.4.113 with backported wifi from 5.8.18 plus cherry-pick of the following changes:
bluetooth: fixed #ifdef'ed PM callbacks ("BTLowPower" wakelock) 50f16d16b32871c5ce97b029e68692008c848bb2
SELinux enforcing
Build as userdebug, normal loglevels
* For links to sources see 1st post. Z3Dual does not have official Lineage17.1 sources yet, bringup is in progress.
Xperia Z3 (D6603):
HiDrive
hidrive.ionos.com
md5: d7aaf1fea120df3e2aad10b3a2d32226
Xperia Z3c (D5803):
HiDrive
hidrive.ionos.com
md5: 456ff87441c3a63e8dc8c7a8d03bdf39
Xperia Z3Dual (D6633):
HiDrive
hidrive.ionos.com
md5: 1848681c82d608f3212f1ace621327cb
As always, feedback is welcome.
Click to expand...
Click to collapse
hi mr.tom. it's perfect as always, found no bug except wifi signal power, it's weak compared to stock roms but there was no difference in speeds. maybe it's because of wifi icon that shows little weaker signal.
and about overheating: i didn't test this build for long but while working with it i have noticed that my device is cooler than previous builds, maybe it's because of this new kernel.
i have recorded 4k for about 7 minutes then my phone rebooted i think that was because of too much heat, then i've reinstalled stock rom, however, stock rom's camera won't let me record much and the app shuts down because of heat, so i can't find out if stock rom can record 4k at least without rebooting.
i need to test this build for more time i hope the heating is now gone
and one question: can you port cyberian camera mod for these roms? or is that possible?
netwave said:
Has anyone found a bug/installed this latest build yet? lineage-17.1-20210320-UNOFFICIAL-z3dual
Finding this super stable.. The only thing that does not work for me is the advanced boot recovery that goes back into system, But that's a known issue.
Click to expand...
Click to collapse
lineage os recoveries have these problems yet, there's no fix for that, only the developer can fix it. currently the twrp works if you flash it to FOTAKernel partition but i think the twrp is useless because it doesn't install these builds.
Surely better to do: fastboot boot recovery-20201012-TESTING-z3dual.img rather than a "flash" recovery. What would be the point in flashing a recovery if its not working.
Hey
Thanks @Mr.Tom_Tom for new build and @TheShadowOfAGhost20 for testing dev builds!
today i installed the new release
but i have some problems with recovery and boot
after installing Lineage i cannot boot to recovery again
i tried adb, android advanced boot options and "fastboot boot image.img"
none of them taken me to recovery mode
so i needed to install Magisk , OpenGApps , and rom itself with adb sideload and reboot to system because i can't boot to recovery again
i'm now installing my apps for daily usage testing - i need about one or two week to test and use and see if anything is wrong or not
for now WiFi problem is gone , i have full wifi access and both sims antenna
again , thanks to everyone puts effort on this project (and sorry for bad English)
i will update this post if i found anything
navidmafi said:
today i installed the new release
but i have some problems with recovery and boot
after installing Lineage i cannot boot to recovery again
i tried adb, android advanced boot options and "fastboot boot image.img"
none of them taken me to recovery mode
Click to expand...
Click to collapse
If your going to settings\system\developer options\advanced restart\power\restart recovery , Forget it! this method doesn't work for now, & will only boot you back into Lineage. It's an issue that hopefully get's fixed in the future.
But here's a better way of entering recovery without having to flash it...
Check all your drivers are installed correctly & make sure you have the correct recovery to hand.
Here's what I Command:
adb devices
adb reboot bootloader
fastboot devices
fastboot boot recovery-20201012-TESTING-z3dual.img
Good luck!
Hey again
Thanks to @netwave i can now boot to recovery without problems by going to fastboot from adb , and booting image directly by "fastboot boot"
while using devices after installing new release , i have a problem with WiFi connectivity
when i lock the screen by power button , the wifi disconnects
for example i use whatsapp a lot and when screen is locked wifi is not connected
i checked power settings - and even set the battery profile to "Quick" (and battery saver is off) but it did not help
is this a bug or a feature?
navidmafi said:
Hey again
Thanks to @netwave i can now boot to recovery without problems by going to fastboot from adb , and booting image directly by "fastboot boot"
while using devices after installing new release , i have a problem with WiFi connectivity
when i lock the screen by power button , the wifi disconnects
for example i use whatsapp a lot and when screen is locked wifi is not connected
i checked power settings - and even set the battery profile to "Quick" (and battery saver is off) but it did not help
is this a bug or a feature?
Click to expand...
Click to collapse
Have you tried without Magisk installed? Don't use v22.0 what ever you do as it disables WiFi
Ow
I'm using Magisk and it is version 22.0
and even root not works
should i reflash ?
Edit : Ok i'm flashing again now
navidmafi said:
Ow
I'm using Magisk and it is version 22.0
and even root not works
should i reflash ?
Click to expand...
Click to collapse
Install the Magisk uninstall.zip from recovery
when your back in Lineage your still have a disabled WiFi as Magisk does not uninstall correctly.
So Install the original boot extracted from the Lineage.zip to get things working again.
- adb devices
- adb reboot bootloader
- fastboot devices
- fastboot flash boot boot.img
- fastboot reboot
Then your be sorted.
I have ELS-NX9(C636R4), managed to downgrade from EMUI 12 to 11, but i couldn't downgrade it to 10.1.0.131 or lower to get lzplay working any more. i have spent more than 10 days on it, burned midnight oil and no luck.
1) I tried hisuite 610 with proxy v3.0.1, but site
(https://professorjtj.github.io/v2/)
can only provide 10.1.0.158. no lower version.
if I tried to use the old one (https://professorjtj.github.io/) by fetching individual base, cust, and preload for 10.1.0.114, hisuite always got update EMUI 12 instead of the old roll back version.
2) I found a firmware els-nx9-10.1.0.114(C636E8R4P1) online from this thread: https://forum.xda-developers.com/t/downgrade-els-nx9-from-182-to-131-for-gms.4246379/, put it on sd card, dload, but it always shows the error: incompatible version. why????
can you please shed some light? million thanks
finally I got it work.
1) the MOST important thing:
change your DNS server to 114.114.115.115 and make sure restart the proxy and hisuite again.
it is described here: https://forum.xda-developers.com/t/...news-discussion-support.4346741/post-86489617
and my comments here: https://forum.xda-developers.com/t/...ernet-connection.4032695/page-2#post-87199475
2) I followed the video in post #106.
[badmania98] Huawei P40 (Lite, Pro, Plus) Guides, News, Discussion & Support
Hello! Because I answered to the same questions on different threads, I decided to create this thread, where I will provide my experience to you, in one place. The followings messages (2-7) contain all major info and tutorials links from this...
forum.xda-developers.com
and used: the proxy 2.4.0 and hisuite 550_ove in the attachment.
please make sure: 1) you run both in admin 2) hisuite the setting has proxy 127.0.0.1 and port 7777
basically,
A) you start hisuite first as admin and connect phone with it. then start proxy as admin, clear all fields in package url and package name, then follow the following steps in 3) to select rom, proxy UI will be automatically populated.
B) in proxy, select roll back OS, and click on set up.
C) restart hisuite as admin because it will be closed in step B.
3) then used the following version 10.1.0.122 from https://professorjtj.github.io/
by choosing model: ELS-N29, region C636 and target version: 10.1.
later now lzplay worked fine. also notice phone will lose usb connection capability after the downgrade, thus I needed to use huawei nm card for later store installation usb capability will be resumed in the future after phone update to emui 11.0.0.249 version
for my own record ELS-NX9, C636R4, the following package urls are package names:
base:
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/e3/v3/26d5deaede104f5fb6055f988d7eb62a/
ELS-LGRP4-OVS 10.1.0.122
393319
cust:
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/03/v3/55c56bb1de574079b24b990b8b289251/
ELS-N29-CUST 10.1.0.7(C636)
384169
preload
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/90/v3/32563083177f4d25a05fb69b252f1470/
ELS-N29-PRELOAD 10.1.0.1(C636R4)
382875
damn, after upgrade to EMUI12, I got the error : the device is not play protect certified
try this, it didn't work:
tried the following steps and it worked again, not sure how long it is going to last:
-turn off wifi
-settings-> apps-> apps -> show system processes(...) -> search google
-google service framework(version 10), clean cache + manage storage(clear all data) + force stop
-google play service, clean cache + force stop // note: no manage storage in this step
-google play store, clean cache + manage storage(clear all data) + force stop
-reboot
-settings-> apps-> apps -> show system processes(...) -> search google
-google play service, clean cache + manage storage(clear all data) + force stop
-reboot
-enable wifi
the above steps are from this magic video: