Related
Hi guys!
Recently i buy this Photon Q 4G LTE Sprint to my wife's birthday.
It's a wonderfull device with a nice hardware, but the best is the external keyboard (She likes it, because his old device was Motorola dextr, and she was used to), but we're from brazil and my first difficulty was to find a rom that support drivers without bugs.
So here i was: My first try was MIUI. I unlocked my bootloader, rooted and installed TRWP. Didi Backup, formated and installed MIUI, :good:
First i tryed with Kernell the UFO developed for it, and the device don't boot. After i tryed just the rom, but it has no modem or wifi. So i flashed up the stock rom modem img and worked fine.
But apks like "retrica" doesn't work with it, bringing black photos and others apks made for instragram. I love this rom and i have installed in my Xperia Play. It works perfect, but in this device have a lot of bugs, so i give up.
I know how to use it with bugs, but not my wife. Then i had to try another one.
I downloaded Cyanogenmod CM10.1, CM10.2, CM11 nightly, snapshot. Then after try all "Xt897" roms, i tryed all "moto_msm8960".
I can't get in any of this roms make my wifi or 3G work. I believe that modem is not compatible. Even if i tryed to flashed stock modem after, i still had no signal at all. No IMEI, no MAC Address, nothing. :crying:
This device have few alternative roms, so i decided try to translate the rom with less bugs at all. I picked up the stock rom JellyBeans 4.1.2, but this was my second failure. A language patch is something that you don't find in market, and to disassembly entire rom and work in a translate is something beyond my knowledges.
So i have an answer to someone that know how to do a fix patch to wifi in cyanogenmod(Specific "cm-11-20140518-NIGHTLY-moto_msm8960.zip" ), or someone good in translate rom, or input a language in stocked rom, like The Solutor did in " [Full ICS ROM] Multilanguage/Toggle2g /STK/Tethering" (but the rom he used was 4.0.4 and it have bugs).
I will be grateful for any help. :fingers-crossed:
Hmm, what's the language you want (CM11 already have lots of them - not in the list?), and what WiFi/3G problem are you having? And you also failed to RSD the phone back to stock?
My recommendation is you first sort the RSD thing out and get the phone back to stock 4.1.2, and flash everything from that onwards. Assuming that you don't do anything wrong in the process, you should have no quirks with WiFi/3G.
Sent from Google Nexus 4 @ CM11
Try MoreLocale2 for the stock ROM language issues.
As for the CM issues... I agree with Andy, if it works in stock form, it "should" work on CM - at least that has been my experience.
You are clean wiping / factory resetting before or after flashing CM yes? I see you have done this step for MIUI, so I am thinking that you have already done this step...
If you have, can you provide logs from CM if the wiping/RSD'ing doesn't work?
Thx for help guys...
AndyYan - The language i need is Portuguese(Brasil) and it has on CM 11 and MIUI.
I did it as you said. I downloaded stock from here:
http://sbf.droid-developers.org/phone.php?device=3
Rom version: Android 4.1.2 - Blur_Version.98.10.5.XT897.Sprint.en.US)
And flashed by RSD.
Everything ok till here. No errors, nothing wrong. Wifi working as well, and the network.
My MIUI was taken from here: http://forum.xda-developers.com/showthread.php?t=2444449 (GSM one).
Cool rom, it has wifi and network, but camera bugs with some apks. For me ok, but not for my wife. So this rom was discarded.
CM i dwonloaded from here: http://download.cyanogenmod.org/?device=moto_msm8960
The last one was: cm-11-20140521-NIGHTLY-moto_msm8960.zip (i tryed all of then "XT897" and "moto_msm8960", but none of them could get my network working. No wifi, no IMEI, no MAC, no wifi).
CM was my hope, because it has my language, but in all tries i did the wipe in cache, dalvik, system, factory, even internal memory, before installing, and cache or dalvik after flash. I tried this in all (tried not wiping too) and still has no modem.
After this, just for try, i flashed stock modem "NON-HLOS.bin". Still got no modem in any CM roms.
arrrghhh - i did try "MoreLocale2" for the stock rom, and "Set Locale and Language" (and more). This softwares did a nice job for keyboards and apks, but system stays intact in english. It need to be a real translation for my wife.
My guess is that this issue can be easily solved.
If all JB roms have the same system(at least for "moto_msm8960" processor kind ).
This ROM is generic for Motorola Atrix HD, Electrify M, Photon Q, RAZR HD, and RAZR M right?
Razr HD is a type of phone that came to my country.
Is it possible compile a system from Brasil career stock, for this phone with modem and anything else from my stock rom? Does it will crash my phone?
Please provide logs from the latest build of CM after booting and attempting to engage/connect to wifi.
Logs??
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.
Skymidt said:
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.
Click to expand...
Click to collapse
CM does create logs. If you're not familiar with them, the easiest way is to use an app from the Play Store... which I'm not sure how you will manage without wifi or mobile data, and I assume you are not familiar with adb.
I can go thru the detail, but it's a bit involved. Perhaps this thread will help you?
Once you know how adb works, there's actually an easier method than using adb logcat to output to a file - there are logs stored in '/data/logger'. So:
Code:
adb root
So you can have the permissions to pull the files, then pull them:
Code:
adb pull /data/logger
Will pull all of the log files to wherever your command prompt is. If you 'cd' (change directory) to your desktop, doing the adb pull will send all the log files to your desktop.
Let me know if you have any questions, good luck.
Logs from Adb
Yeap! I'm familiar with ADB!!
(i'm not expert in it, but i already did something with that...)
I don't know exactly what are you lookin for, so i did two logs.
First a complete boot:
Code:
adb reboot system
adb logcat -v long > boot_log.txt
And one for especific modem log from boot
Code:
adb reboot system
adb logcat WifiStateMachine:E *:S -v long > just_wifi_error.txt
(I believe this this won't help u a lot?!)
The first one is the most complete solution for this and have all the boot infos, errors and other things.
If am i wrong please say the correct command to use.
I forgot something...
In filemanager i can't access internal storage.
It shows /storage/emulated/0, and points to nothing.
If i'm right, this was a well know bug on CM 10.2, which supposedly been fixed in CM 11 right?!
I think that information can help to solve this bug...
Please try the adb pull command I sent... Those logs are not very helpful, and quite difficult to read.
However, I have a feeling if you use RSD Lite to flash everything back stock, confirm it works, then start with the latest CM, I'd be curious if it works.
Also, someone mentioned they needed to install the CM10.2 snapshot before going to CM11 - or else BT and wifi did not work.
Eureca...
That is something that i didn't tried! I'd never flashed CM 10 in first!!!
I'm downloading "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip ".
Fisrt i'll flash stock "Blur_Version.98.10.5.XT897.Sprint.en.US" with RSD.
Then fastboot "logo.bin" (to avoid warning unlocked), and TRWP(my stock have a original recovery that can't install CM. I can edit XML, but to cleanse my conscience i'll let this way).
After i'll install "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip" with TRWP and boot with this one.
Then i'll flash "cm-11-20140526-NIGHTLY-moto_msm8960.zip ".
But i'll have to do this at night(it's 12pm here), because i'm working today.
If that don't work i'll pull the log that you said here, but I come back to thank.
Same problem
I confess I was hopeful in that case you said to flash first the CM 10.2.
But again failed. I tried two ways:
In both I tried to install the Snapshot CM 10.2, then the CM 11.
There is no way that cell boot with "CM 10.2" in any case. That saty on boot animation for several time(i waited 30 minutos each).
In the first I downgraded to version 4.0.4 stock to see if the modem worked.
After that i flashed CM 10.2 that stood in boot animation, then CM 11 booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.0.4.7z)
On the second attempt, I used the default stock 4.1.2.
After CM 10.2 which was stucked on boot animation again, then CM 11 again booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.1.2.7z)
Strange thing happened on both CM 11 boot. When the system's load, it shows a message "The clock stopped". This is strange thing for me.
Can you wait for CM10.2 to boot...? There is a fsck process which sometimes takes quite a long time to boot.
Also, for your FC issue - you are clean flashing the ROM everytime? You are doing a factory reset everytime you flash a new ROM?
Edit - looking at your logs, I don't think the fsck is the issue... something is causing the CM10.2 boot to die over and over. Please try clean flashing...
I clean everything before.
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?
Skymidt said:
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?
Click to expand...
Click to collapse
Yes, factory reset == clean flash.
As for the long boot, I'm not sure the fsck is your issue - basically there is a process which runs a disk check, and sometimes this will make the boot take quite longer than usual. I can't say how long, I've never personally experienced the issue.
However, the fact that CM10.2 isn't booting is a little disturbing. I've heard some people report 45-60 mins... can you do me a favor, charge up the phone, and try to let it boot for at least 90 minutes?
If at the 90min mark it still hasn't booted, pull logs and post them.
Thanks.
The logs contain references to apps that are present only in stock firmware.
That means the CM boot is actually not happening in a clean environment (the data wipe/factory reset in TWRP hasn't worked as it should?).
Please try to use OpenRecovery 2.09 instead of TWRP (as OR is the recovery I personally use and watch for possible bugs) to wipe the device and to install CM11 - http://forum.xda-developers.com/showthread.php?t=2211579&page=10
When installing CM in recovery, you will probably also want to install the gapps package - http://wiki.cyanogenmod.org/w/Google_Apps
Btw., CM11 expects the baseband (modem) and other partitions the be at the 4.1.2 stock level. Experiments with 4.0.4 are useless.
Please post the logs from CM11 boot.
You will need to enable the logger under CM11 by
Code:
su
setprop persist.log.aplogd.enable 1
in Terminal app or ADB shell, it's not enabled on CM11 by default.
Links are broken
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?
Skymidt said:
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48551561&postcount=75
I'm on an older version of TWRP, and it has never failed me... that's a shame really. I'll try to update and see what's what. In the meantime, flash OpenRecovery I linked above ^^.
Skymidt said:
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
Click to expand...
Click to collapse
TWRP 2.6.3.x should also work properly.
@arrrghhh, so you see it's not just me having the "wiping /data reboots the recovery" problem... I've already sold my PQ (might buy a new one in the future), but please do help let this problem be known to whoever's developing TWRP for us
Sent from Google Nexus 4 @ CM11
I can't believe it works
Unbelievable! :laugh:
This very simple solution worked for me.
My TRWP did not work right.
He said he had done successfully in cleaning the cache and manufactures, but did not.
I downloaded the link you guys sent me and it worked on the first try.
Not needed before installing CM 10.2. Already installed in the first CM 11, has worked with modem and everything. Now I can configure the GSM network my country and language of the country for my wife (PR-BR).
I want to thank the efforts of user @ AndyYan to respond, the attention given by the user @ Arrrghhh teaching me with patience, and the solution given by the user @ kabaldan. :victory:
You are awesome for this forum. Thanks for everything.
If you still want the log I get, but I think with everything working, you guys should already know the outcome.
Q&A for [ROM] Official Cyanogenmod 11 4.4.4 for the Moto G 4G (Peregrine)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Notification light not working with cyanogenmod
Hi,
I'm using cyanogenmod (m6 and afterwards the current daily builds) on my moto g and for quite some time I have the problem that my notification light is not working. I tried out installing the motorola led activator widget, but this doesn't help. Even when trying out an LED tester app nothing happens. The LED is not broken though as it lights up when trying to boot my moto g on low battery. Do you have any ideas how to solve this?
Thank you in advance!
Link down
Seems the latest build link is down
not I download the latest build. fallen servers
Does the ROM still have the low ram bug ?
Problem audio speakers CM11 / Stock ROM
How about, first of all, I'm new here and do not speak English, so I excuse my writing.
I have a problem with my Moto G LTE (XT1040) with Stock ROM 4.4.4 KK Brazil, although I am from LatinAmerica.
Well, I have not much to this terminal, but a few days ago I had some problems with the rom Stock, restarting not it caught more, so I decided to flash the latest rom Cyanogenmod (specifically 20,141,012) due to some stability issues decided you go back to the Stock, having the same error when freezing some applications Motorola as usual to, so back to CM and switch to the "20141016" to the few hours I started to fail the camera, remained frozen when taking a photo . After that, it went back to flashing CM rom and had the same errors, updating the "20141018" was the same, but a new bug, and could not hear the music or videos without headphones was added, calls were heard if it was not for speaker, so I decided to go back to the Stock, but apparently the problem was continuing, feel that the speakers are damaged, but the alarms or notification sounds if they worked properly. Now try wipes Cache / Dalvik from CWM but only achieved a temporary solution, put a good song and all, but to change it or put it back the audio is going.
Help me, do not know what else to do, I guess that having unlocked the bootloader and lost my warranty
Thanks in advance if this post is incorrect or I violate any rule, excuse me, I'll delete.
I'm also trying to get GPS to work on my Moto G LTE in cm11:
Based on what I read here, I reflashed stock, and tried it out, had no problems at all. Then restored the cm11 nandroid I had made, and it couldn't see any satellites still. Will restoring the nandroid backup also restore the not-working-gps then? What is being saved by unlocking the gps? Will I have different results from backing up everything with titanium backup, then going back to stock, using gps, reinstalling cm, and restoring the backed up apps? It's much more of a pain to do it that way, but if it works, I'll find the time...
This is a canadian xt1040, btw, in case it makes a difference.
UPDATE: I went ahead and reinstalled stock, played with gps for a while, and it worked without any trouble, then reinstalled CM11 (oct 21 nightly this time) restored my backed up apps with titanium backup (not any system apps). Unfortunately, still no gps at all. It never sees a single satellite. Is there anything else to try?
Hello,
First of all, thank you and all people to contributing and helping developing CM for this device!
I only have one question about GPS bug :
You indicate that it's necessary to have a GPS lock in the stock ROM first to enable GPS in CM.
Does a fix for this bug is intended/possible or the only one solution is to reinstall the stock rom, enable GPS and install CM?
Thanks in advance.
Audio solved
It updated my previous query, I could solve the problem of audio speaker, I began to disassemble the phone and as imagined, I found steel wool at the entrance and were making contact, so the cell believed to have headphones all the time .
Enable GPS in Moto G Nightly
This is in response to jac0708 in the thread this thread who asked:
Mind expanding on these two? What is the low ram bug? And how do you get a lock from stock for the gps fix?
Sorry for noobishness
Click to expand...
Click to collapse
The answer I found for the GPS not working was that when I installed CM11 within hours after taking delivery of my Moto G, the GPS would not get a fix. The solution is explained here by colinw:
Posted 11 October 2014 - 10:42 PM
Okay I just fixed my problem following some other post for a Moto phone.
1) Made a (nandroid) backup using clockwordmod of my current setup (cyanogen 11)
2) Restored old backup of a stock rom (I restored back to the one that came with my phone)
3) Then I had to USE the GPS - hadn't done that yet. Also made sure it was set to Device Only mode in settings->location because someone somewhere suggested it.
4) Restored to cyanogen rom.
5) Working!!
Click to expand...
Click to collapse
Just wanted to add that it doesn't always work. I tried at least three times, restoring stock, using gps, and then restoring my backup before I had gps working in CM. But it does work now! Be patient, and maybe just leave the phone with the stock, sitting on maps for a while. Perhaps I rushed it before?
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
chrismin13 said:
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
Click to expand...
Click to collapse
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
shaun298 said:
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
Click to expand...
Click to collapse
Thanks for the response!
Good idea! I was thinking of going back to stock and repeating everything. It should fix all my issues. It's too bad that I don't have a working stock backup and I will have to flash through Odin. The reason that I am not doing this is because I am afraid of making it even worse from the official status state that I have in Download Mode and my device is an n8013 under About Device. A flash back to stock through Odin would probably flash most of the system parts which would be kinda dangerous. But on the other hand that would mean that I could give it a brand new try with better luck possibly! It's not that TouchWiz ROMs don't work, it's AOSP that doesn't. I played a lot with Hyperdrive and seems like it's doing better from the lag prospective. But that's only gonna last 15 days. I am sure! So, I'll have your response in mind! Might try it out when I have some free time. Unfortunately, that will probably be Christmas.
Thanks,
Chris
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Phil789 said:
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Click to expand...
Click to collapse
I don't have any video playback issues. It's just the camcorder that doesn't work in AOSP ROMs.
Yes.My use of the word "video" should have been "video recording".
The time has come!
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
chrismin13 said:
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
Click to expand...
Click to collapse
I did it! It worked. Everything went OK but:
- Flash count is 0 and status official
- Back camera records in slow-mo
- Chromecast mirroring does not work
However:
-My device is an N8010
-I use the front camera instead
-Mirroring was not really needed
-LAG IS HISTORY!!! [emoji50] [emoji2] [emoji2] [emoji2]
I am so impressed by the performance, still doesn't best my nexus 4 with KK 4.4.4 but it's a GIGANTIC IMPROVEMENT! Veeery happy! Thank you for your support, I wouldn't be here without you!
Merry Christmas and happy holidays!
Chris.[emoji2]
It's been a while since I've tinkered with my Note 3, usually because I fancied seeing what the Note 7 OS looked like etc.
The last time was to unroot my phone and put the official KitKat back.
Now after sometime I've had issues with services like Bluetooth so I reinstalled the stock ROM although it's BTU Lollipop this time because for some reason Odin wasn't accepting my H3G 4.4.2 stock ROM.
Nevertheless, it has installed but to my surprise, all my apps, settings and messages are still there. The Bluetooth service is now back in business too. I guess I should be pleased but I'm wondering if this should happen?
As mentioned, it's been a while since I played about with ROMs but that was when I rooted and used apps like CWM but how do I completely wipe my phone first without rooting, before installing the stock ROM?
To install a stock ROM I press Vol. down, Home & power buttons and use Odin but before this, do I use the Vol. Up option first to wipe everyting?
One little extra question please, because my KtKat ROM seems corrupted now, where can I go to get another one? I can see samMobile.com has them but you have to pay. If that's the norm now then so be it.
Thanks very much and hope you can help.
Actually, nevermind, I bit the pillow and tried the Vol. Up option first to wipe the data & partition cache.
Just didn't know if I was going to find myself unable to install a new ROM with the Vol. Down option afterwards.
Needless to say, it worked a treat!
Very happy bunny.
tl;dr - TWRP touch screen won't work after installing custom ROM, much hassle to unbrick, looking for a "bumped" (still not actually sure what that term means) or otherwise modified version of TWRP that won't go haywire when installing a custom ROM.
tl;dr 2 - Also interested in the LATEST "stock-based" ROM recommendations anyone may have... G3 backports or whatever. She needs her Camera to work well but older 4.4.x and 5.0.x OS is missing a lot of new functionality and compatibility with new apps.
I'll just start out by saying that I've figured out just about every way to brick and subsequently un-brick this device that is feasibly possible, and am considering starting a thread specific to those various methods... but that's not what this is for.
This is an issue I've encountered a few times now, definitely on my girlfriend's T-Mobile LG G2 D801 with Lollipop (30B and now again on D801 30C), and iirc, also on KitKat.
I'll explain what I can remember, most of this has been done in the middle of the night after many frustrating hours of attempting various methods... I have to say, this phone has been much more difficult to mod compared to my previous experiences with Samsung and Nexus devices.
I had gotten this device all the way through to CM12 or 13 a year or so ago but recent issues made us decide to attempt to revert back to a Stock-based ROM.
Steps:
1. Root (ioroot / Autorec, can't remember which or for what reason, I have multiple versions of each)
2. Install TWRP Custom Recovery (most recently and successfully using a modified version of the "30B Freedom Tool", although I haven't tried that on 30C - yet.
3. Transfer custom ROM & Kernel to SDCard.
4. Boot into TWRP and install custom ROM & Kernel - most recently GoogleEdition 1.5 and then DorimanX 12.0 Kernel
5. Clear Cache / DALVIK Cache.
6. Reboot device. This is where the trouble begins...
Results: Won't boot into OS at all, instead I end up at the text-based "fastboot" screen, which after multiple tries I can eventually get back into TWRP or into Download Mode.
Once in TWRP after installing custom ROM, the bottom ~1" of the screen won't respond and all other touches aren't accurate... playing with it, I can usually eventually get into some of the TWRP screens, but for most purposes it's about useless.
I managed to restore a backup of the original 30B system image via command line over MTP using ADP TWRP commands, but that bricked the phone in an entirely separate manner where I couldn't access Recovery anymore and the system wouldn't boot at all... I ended up using the LG Update tool to get it up to 30C, and was surprised to find that it still had the restored backup data (apps, pictures, settings, etc), and the phone is now working again, albeit back to stock recovery.
Now, as I mentioned, this isn't the first time I've run into this "phantom touch" issue in TWRP on this device, although the circumstances seem to be a little backwards this time vs when I was taking the device over to CM12/13. I think I remember something about a "bumped" or otherwise modified version of TWRP being out there, but I can't find it now or put my finger on what the changes were.
Has anyone else run into this? I am hoping I've just overlooked something, but days of digging through threads hasn't turned up much.
/edit/ To give you an idea, attached is the folder I've got files stored in... with tons more in Archive and Stock-Based... I've used them ALL at some point. I'd like to get enough info in here to write a Step by Step guide for new owners who are picking these devices up on the cheap, and would appreciate if anyone wants to help out with this!