Dear XL2 user here the root guide for you.
"Kingo Root"
http://www.kingoapp.com/
Required:-
1.PC
2.Internet Connection.
3.USB cable
4.Canvas XL2
Instructions:-
1.Download the Kingo Root app from
http://www.kingoapp.com/android-root/download.html
2.Open it.
3.Connect your phone n wait for Drivers they are being downloaded.When download is completed and devices is shown.Go to next step.
4.Now go in Developer Options and Select USB Debugging.{if their is no dev options in settings.Then go in about phone tap randomly on Build Number.Then you will get Dev mode in Settings menu.}
5.Pay attention to your device screen for a prompt window. Tick "Always allow from this computer". If you don't, you will probably get yourself an OFFLINE DEVICE. {If the window is canceled or dismissed then reconnect you phone.}
6.Click "ROOT" button.
7.It will take one or two minutes.:angel:
8.Root succeeded, click "Finish" to reboot your device.:good:
it can work on any mt6589.
If you liked my work then press thanks button.
Related
hey, guys this is me again and I have got a lot of PMs and messages on my email regarding guide showing step by step process for rooting micromax A56 ninja 2.
Now, there are two ways to root this phone.
[FIRST] :-
1.Just download the .zip file to your computer and then transfer it to your sd card.
http://www.mediafire.com/?pfl66pst67bblq1
2.Now switch off your device.
3.Press "volume+" key and "power button" together.
4.when the phone vibrates (it does when you switch it on or off normally)..leave the power button but continue pressing the "volume +" button.
5.you will enter into your recovery.
6.you will see a yellow bar showing the completition for the process.
7.leave your phone and dont touch it until it completes.
8 .Your phone will restart.
9.download super user app from the market and install it. (IMP).
10.you are rooted.
Requirements:-
1.Nothing.
2.back up your contacts and messages and other data.
[SECOND] :-
1. download the attachments here.
2. download this : http://www.mediafire.com/?jrzuezl8s5t8k0s
3. download android sdk from http://developer.android.com/sdk/index.html.
and install it by following the instruction onthe page.
4.extract the usb.ini file in the ".android" folder located at C:/users/(ur_name)/
5.You dont need to create this folder it should already exist...after you installed the sdk.
6.download and install unlock root from step 2
7. go to your phone's settings->applications->development and enable USB Debugging NOW connect your phone to PC.
8. go to C:/users/(ur_name)/android-sdk/platform-tools
9.open command line there
10 type adb devices (hit enter)
11. verify that A56 is listed.
12. now run unlock root. and click root option.
REQUIREMENTS :-
1.patience
2.Common sense.
NOTE : if you get any unexpected results or any step is not giving the output as desired. JUST GO WITH THE FIRST METHOD.
Regards,
imetal1.
Nice TUTs man....this may help the newbies here.
That rom given by swap002 is nt rooted i've checked it.
Its just the same as we both felt pre rooted stock rom. It needs to be rooted via unlockroot.
Sent from my A56 using xda premium
After Searching Various forums i found that only method for rooting this tablet was to flash a custom rooted rom but i did not want that after a lil more searches i was able to find a one click root for this tablet
This method may work for other rk3066 tablets as well try at your own risk
How To Root Lava Xtron+ (rk3066)
Enable USB Debugging from developer options ,to do this go to “Settings” -> “Developer Options” -> “Debugging” ->” USB debugging”
and tick the mark in front of it
Download Kingoapp and install it on your pc
Connect your tabled and open kingoapp then let it detect your device once done then Click on the orange root button and wait for process to finish .Also keep an eye on the tablet screen for any su permission prompts .The Tablet will soon reboot several times and then you will see root successfull message on kingoapp.check for su app in your app drawer if present you are rooted now :victory:
SOURCE
hello Friends...
now you can easily root your karbonn A16 mobile...
Simple steps are here
>Download and install SRS One Click Root on your PC.
>On your phone, go to Settings > Developer Options and tick USB Debugging to enable it.
>Connect your phone to the PC using USB cable.
>Slide the notification bar down and make sure that your phone is connected as USB Storage. If it isn’t already, you can change it to USB Storage by tapping the Touch for other USB options notification.
>Open SRS One Click Root app on PC.
>Select the option that says Root Device (All method).
>After a while, your phone will ask if you want to install the application SRS Root is sending you over ADB.
>Tick the checkbox and select Install.
>When a popup appears on your phone asking you to choose the exploit, select Install SuperSU and click on Bormir.
>A Success message will be displayed on your phone as well as PC.
>Reboot your phone and check if you are rooted.
you can download SRS one click root from here
Mod Edit: Links removed because they were pay per clicks
NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.
Need stock recovery image
mohitnizami said:
NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.
Click to expand...
Click to collapse
Hi,
Thanks for your tutorial.
I got my phone rooted. However when i tried to install custom recovery.
Its not working as the cwm recovery image found to be not working which i sourced from another thread. Now i lost my stock recovery as well.
Could you please upload the stock recovery image or working cwm recovery image.
Thanks. l
So since there are no tutorials on this I wanted to share my knowledge!
This is how you can root your Vodafone Smart 4 Turbo running 4.4.
Gather a standard USB to micro USB type B cable so you can connect your device to your PC. This cable came with your device.
Go into your settings to enable developer options. This is done by going into settings -> About this phone -> pressing build number 7 times.
Go into settings -> Developer options -> Enable USB debugging
Download RootGenius from: shuame.com/en/root/ (Windows only)
Go into your device settings -> Storage now press the menu key (key on the right bottom corner of the device), press "USB Computer connection"
Uncheck all possible options.
Run the RootGenius.exe file which you downloaded in step 4.
Once RootGenius is running, connect your device to your PC, there should be no driver issues here. RootGenius should detect your device.
When the button "Root" Appears, press it and wait.
When the process is complete your phone will be rooted BUT wait! This installed KingUser app onto your phone, which is not very desirable.
To get rid of kinguser and replace it with SuperSu from ChainFire, download this app from the play store. It's called "Super-Sume"
Once this app is installed, open it, press the big blue button, wait. Once it is finished you will be taken into the newly installed SuperSu app.
Uninstall the "Super-Sume" App.