My xperia sp got bricked when flashing custom rom cm12 lollipop... and my battery phone is dead 0% so whenever i try to flash a stock rom or kernel or ANYTHING from flashtool using flashmode or fastboot mode with fastboot files it keeps disconnecting from flashmode or fastboot because my battery needs to be charged... but the problem is that i cant charge it... i tried charging it and then go to sleep for 7 hours and it didnt work... please gimme a suggestions on how to charge my battery, i cant power the phone off at all only if i plug it in socket charger and it turns red without sony loop and wait for it to get green for flashmode and then open the cover and keep holding the off button till it vibrate 3 times but nothing really happends except if i keep holding the off button it just keeps viberating 3 times OVER AND OVER endlessly and dont tell me to give the battery to someone else to charge it or to charge it with another phone because it not possible the battery is not removable and NOONE in here buys xperia they only have iphones which is BS ok lets not be racist here, i would really be grateful if anyone can help i cant seem to be able to do ANYTHING to fix the brick if i dont have a charged battery so please help and thanks.
https://www.google.gr/search?q=xper...F30%2Fxperia-z2-disassembly-guide%2F;1440;900
as you can see battery can be replace.so you can buy a new one or you can charge it with an external charger
Related
Hey all
Ive had my nexus s for over a year now and not had much trouble with it. Untill now
It simply wont turn on.
I was about to install a kernel so i shutdown my phone, it hung so i pulled the battery. When i attempted to turn it on I get nothing. Ive tried to batteries and charging it which has not helped
When i plug it in my computer doesnt reconise it. I cant even boot in to the boot loader
Any ideas?
hal752 said:
Hey all
Ive had my nexus s for over a year now and not had much trouble with it. Untill now
It simply wont turn on.
I was about to install a kernel so i shutdown my phone, it hung so i pulled the battery. When i attempted to turn it on I get nothing. Ive tried to batteries and charging it which has not helped
When i plug it in my computer doesnt reconise it. I cant even boot in to the boot loader
Any ideas?
Click to expand...
Click to collapse
Does it show the charging symbol on the powered down phone when you plug the charger in? Maybe your power button is broken.
Make sure you are using the AC adaptor to charge and not a usb cable.
Nope, nothing atall :-(. The only indecation its doing anything is that the battery is getting warm.
Try this with both of your batteries, separately:
1. Remove battery from phone.
2. Wait for 5 minutes.
3. Put battery back in and connect to AC adapter (not usb)
4. Wait 5 minutes.
5. Press the power button.
6. Re-try 1-5 with the other battery.
Same thing happened to me... it seems the phone is not recognizing the power adapter.. ARGGHHHHHH
If anyone as fixed this, please let me know!!
You may want to give this tool a try, see if it does anything.
http://forum.xda-developers.com/showthread.php?t=1397393
Hi, did you find a solution to this issue? my nexus S won't turn on.
It's getting warmer when plugged in, but it has no indicator of charging, nor is the power button working :S
Any help would be appreciated.
Hi
I would start a new thread since this is one year old....
But please give more information:
Are u rooted or stock?
If rooted, what recovery, what ROM, what was happening prior to issue.. etc.
The more info the better for readers to help give advice.
Good luck
Vs Nexus S4G using tapatalk2
Atrix 2 wont turn on
the white led comes on when i plug it into computer before i was trying to flash in fastboot but battery was low so i left it for a while to find it like this
Try plugging it into the wall. I had the same issue where it would bootloop to cwm recovery and not pass the M logo. Good luck...
If u can bootstrap recovery.. stay there.. and plug your phone into the wall and have it chill there. It will charge in recovery.
try plugging it in to the wall, but you may have to get it to charge manually by doing some cable splicing, there is a thread around here with details, this is not as hard as it sounds, so have no fear you can get your phone back. word of advice: make sure your battery is at least 80% or so before starting to flash or something like that. You will never have this problem again as long as you make sure it is full.
Hey, Guys
Im having a big trouble with my XJ
The Story
I installed CyanogenMod11 (By Team Tamsui) and the battery was drained so i put my phone into the wall charger then i slept
I woke up find my XJ like that:
Black Screen then i wanted to open it then only a red LED blinks 3 times and vice versa
When i connect my phone to wall charger without pressing anything it gives Green LED
when i connect to fastboot via wall charger there is Blue LED
when i connect to flashmode via wallcharger there is Green LED
When i connect to PC without any buttons Red LED blinks about 10 then it goes to flashmode
I reverted back to stock .31 JB firmware then relocked bootloader but also without any luck
Guys, Please don't talk about Drivers Problems for flashtool im pretty sure that they are working !
Also post any solutions different than (Go to SONY Repair Service)
Help me guys please !!
XDAAssist said:
Hey, Guys
Im having a big trouble with my XJ
The Story
I installed CyanogenMod11 (By Team Tamsui) and the battery was drained so i put my phone into the wall charger then i slept
I woke up find my XJ like that:
Black Screen then i wanted to open it then only a red LED blinks 3 times and vice versa
When i connect my phone to wall charger without pressing anything it gives Green LED
when i connect to fastboot via wall charger there is Blue LED
when i connect to flashmode via wallcharger there is Green LED
When i connect to PC without any buttons Red LED blinks about 10 then it goes to flashmode
I reverted back to stock .31 JB firmware then relocked bootloader but also without any luck
Guys, Please don't talk about Drivers Problems for flashtool im pretty sure that they are working !
Also post any solutions different than (Go to SONY Repair Service)
Help me guys please !!
Click to expand...
Click to collapse
it's just battery I think
charge it in other phone or via outer sources or other battery.
keep calm and call J.A.R.V.I.S
Thanks !!!!
bakshish007 said:
it's just battery I think
charge it in other phone or via outer sources or other battery.
keep calm and call J.A.R.V.I.S
Click to expand...
Click to collapse
@bakshish007 thanks bro you saved my life man
i charged it for 10 hours in my samsung wall charger and everything is now fine
:laugh:
I have bricked my phone while flashing RUU. My phone didn't restart after flash. It doesn't charge and also doesn't respond to long press key combination.
Now when I connect to computer the driver doesn't get installed. Error is "QHUSB_Dload missing".
I found that it is a Qualcomm driver used to identify the CPU serial number and establish any communication with my phone.
How do I unbrick ?
Do I need the JTAG method ?
Can a HTC service center fix this ?
Hi, sounds like a problem i encountered
after hours of digging and end up with not much..i put up a trick that actually worked for me(over and over again for me,cos my H0s keep entering qhsusb_dload mode each time i restart my phone.
u have to take apart your phone, get a torx T5 and a philips screwdriver(search or see at youtube how to take apart your phone.
just take apart the back cover to reveal the mainboard
-disconnect the battery
-connect the phone to charger(charger,not pc/usb)
-keep an eye on the notification led, it will light up(orange) for a couple of seconds after u connect it to charger,then went off
-after the notification led went off, reconnect the battery and pull off the charger from phone.
-(dont reassembly the phone yet)press the power button a few times to see if it will boot, or you can hold the power button for a 10 second.
-in my case,at this point the phone should be booting,but to a bootloop.
-i suggest you enter the recovery when it boots up and do a full wipe.
Try it,do tell me the result please, i hope it will help and do it safely, carefully because anything that happens, i ain't gonna be your warranty desk
hfzarx said:
Hi, sounds like a problem i encountered
after hours of digging and end up with not much..i put up a trick that actually worked for me(over and over again for me,cos my H0s keep entering qhsusb_dload mode each time i restart my phone.
u have to take apart your phone, get a torx T5 and a philips screwdriver(search or see at youtube how to take apart your phone.
just take apart the back cover to reveal the mainboard
-disconnect the battery
-connect the phone to charger(charger,not pc/usb)
-keep an eye on the notification led, it will light up(orange) for a couple of seconds after u connect it to charger,then went off
-after the notification led went off, reconnect the battery and pull off the charger from phone.
-(dont reassembly the phone yet)press the power button a few times to see if it will boot, or you can hold the power button for a 10 second.
-in my case,at this point the phone should be booting,but to a bootloop.
-i suggest you enter the recovery when it boots up and do a full wipe.
Try it,do tell me the result please, i hope it will help and do it safely, carefully because anything that happens, i ain't gonna be your warranty desk
Click to expand...
Click to collapse
I guess this method assumes that the battery has some charge left. Mine doesn't. I tried no result :crying:
I dont think it matters..when you are flashing the ruu how much juice you got left? if u start flashing when the battery is around 100% im sure there should be enough charge to at least turn the phone on..can you tell me more why it didnt work for you? what you went through?
hfzarx said:
I dont think it matters..when you are flashing the ruu how much juice you got left? if u start flashing when the battery is around 100% im sure there should be enough charge to at least turn the phone on..can you tell me more why it didnt work for you? what you went through?
Click to expand...
Click to collapse
Nothing happened when i connected to charger. No LEDs lighting up.
I think my battery might have drained completely.
Here is what happened. I was playing Crashlands when I noticed that my battery is at 3%. So ran to get my Quick charger to get some power fast. After connecting it, I tried to unlock the screen and it went black after a second. So I was thinking that it just shutdown because of low battery. I pressed the power button and noting happens, just the red light showing it was charging. Then I tried soft restart (power + volume up) and it vibrated 3 time and probably shutdown. From that point noting I did started the phone. Even using the off button next to the Sim tray. When I connected it to my PC is ether recognized as Unknown USB device or SOMC Flash Device. I should probably mention that the phone was hot from the game before connected it the charger.
I had the phone for one year and a bit. It is not rooted and i just recently installed the lattes update from Sony. Currently I have it put to charge, at least it looks like it is charging (gets little hot).
Is my phone bricked or something else? What should I do?
I have same problem like this.
Hope someone can help us.
QHSUSB_DLOAD device will show when Connected PC.You can use Flashtool to install the driver.
Unknown divices : because you should complete shut down the power (Disconnect the buttery ).
flash tool will find the phone ,but can't flash.
seems Z1 have a way that find the test point to recovery boot file.hope z5 have the same way.
Sorry for my Poooor English ,hope you can understand what i say and have someone Help US.