Q&A for CyanideL 02-24-2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CyanideL 02-24-2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Im a noob
.
I have installed twrp and rooted my device
i'd like to install this costum rom, currently i'm on cm11s stock (xnph05q)
however, can i just flash the rom or i should install cm 12 first?
.
Thank you
thomas.bonn79 said:
Im a noob
.
I have installed twrp and rooted my device
i'd like to install this costum rom, currently i'm on cm11s stock (xnph05q)
however, can i just flash the rom or i should install cm 12 first?
.
Thank you
Click to expand...
Click to collapse
Before posting, please use the forum search and read through the discussion thread
Click to expand...
Click to collapse
How is this so difficult to understand? If you can't follow the basic instructions in the OP of the ROM thread then you would be better off leaving your phone alone.
You must be on the latest firmware. You can acquire it by flashing an official CyanogenMod 12.
Click to expand...
Click to collapse
Is this same as blisspop ??.. I see most of the bugs similar to the ones I faced in bliss... Strange...but kuddos to the team for the optimization....
Is anyone having issues with audio on CyanideL? I tend to get brief moments of 'static' when listening to music. Just little fuzz/buzz moments which last half a second or less, appearing to happening at random. Strange thing is that this happens on Spotify Premium and in Poweramp with good quality Ogg music, but not in Soundcloud... Just need to check whether it's the ROM/software or my phone as this OPO is less than a week old!
Edit: appears to be happening on both headphone and loudspeaker output.
No issues with music downloaded to phone I don't use spotify I stream to blue tooth and Use wired head phones no issue.
david72262 said:
No issues with music downloaded to phone I don't use spotify I stream to blue tooth and Use wired head phones no issue.
Click to expand...
Click to collapse
Thanks for the reply.
This seems like a hardware issue then. I suppose I could try and revert to stock and see if the issue persists to be sure of that. I just don't want to put up with faulty audio for the next year and a bit!
xela-yuki6 said:
Thanks for the reply.
This seems like a hardware issue then. I suppose I could try and revert to stock and see if the issue persists to be sure of that. I just don't want to put up with faulty audio for the next year and a bit!
Click to expand...
Click to collapse
I seem to have a similar issue with this. I was watching Netflix or twitch and audio stutters or makes a weird noise randomly.
BlackHoleSlam said:
I seem to have a similar issue with this. I was watching Netflix or twitch and audio stutters or makes a weird noise randomly.
Click to expand...
Click to collapse
That's exactly how I'd describe it actually, it's a bit of a stutter. I wonder if anyone else is having a similar issue. I'll download the stock firmware and flash that I think...
xela-yuki6 said:
That's exactly how I'd describe it actually, it's a bit of a stutter. I wonder if anyone else is having a similar issue. I'll download the stock firmware and flash that I think...
Click to expand...
Click to collapse
Okay I seem to have fixed it. I disabled boefella kernel sound affect and audio fx app is disabled. I also raised my cpu and gpu speeds in the boefella kernel settings since I was underclocking.
Okay, sorry if this is a dumb question but how do you get the lock screen and desktop to have the same wallpaper? I've played around in the settings but can't seem to find it.
How is battery life on this ROM? Any bootloop when using themes?
No boot loops battery is good.
No Sim Signal
Hey guys, flashed CyanL in the Morning.
I come from 5.0.2 with the latest cm firmware, but i get no signal.
Any Ideas?
Dirty Flash
hi, can i dirty flash RC10 over RC 9.7? or do i need to clean install?
System UI Crash
I am getting a system UI crash whenever i am using the phone and i get a notification on Hike Messenger. No crashes whatsoever with any other app. Any ideas?
Also, kudos to @mr-cook for the great ROM. Most stable 5.1 ROM i have used.
First of all thank you for this amazing ROM. It's perfect for my needs.
With clean flash, oxygen modem, no xposed & stock kernel i found few problems:
- For me screen off gesture for flash is not working, but for camera is working as expected
- Also for options to disable privacy guard notifications, it still show notification. So for now i need to hide it one by one.
- And the last thing, i don't know if it's from the ROM or anything else. But for me the cLock widget font for the clock is too small, even after i resized it.
I hope you can take a look for my problems, if there's anything that i can provide please tell me.
And also i have a feauture requests to have options to disable power menu in secure lockscreen. Like the options for quick settings.
Other than that, eveything works perfectly and i believe this is the perfect ROM for me, no FC and very stable.
Once again thank you @rogersb11 @mr-cook @TheGeekyNimrod
Audio FX
Its my first post on XDA, this ROM is beautiful and i also got the previus versions. but with this last, the Audio FX app doesnt work for me. i do a clean installation wiping all .... thanks
Great ROM!
I just started using this ROM since yesterday on the recommendation from my friends on the OnePlus forums.
I've tried quite a few known ROMs out there and am really impressed by this one.
The only feature I am missing is having the option of selecting Priority Only on the sound panel in the power menu or having a tile for it in the quick settings. Aside from that, this ROM has everything one can imagine .
Great job guys! @rogersb11 @mr-cook @TheGeekyNimrod
Kernel Mods
Hi @rogersb11 @mr-cook @TheGeekyNimrod
If you are working on updating the kernel, please consider adding sound tweaks to boost speakerphone. On the OnePlus One the speakerphone volume is really low when using it for a phone call, and the tweak in AK kernel helps it.
I love your ROM, but unfortunately have to use to with AK just because I need this tweak.
Thanks!
Related
ZGoing to get a Mod to delete/Close thread because i have a newer release with newer thread so it doesn't get confused with this release
.......................................
KOLOHE is the MAN! BEST ECLAIR ROM out there!!!!
Reserved...for??
YanDroid said:
SUpp! New thread for your ROM?
Click to expand...
Click to collapse
Yup in the other thread people kept talking about different mods and i couldn't fix anything that wasn't wrong with my mod
YanDroid said:
What do i need to push to return to regular Helix Launcher look?
Click to expand...
Click to collapse
You need the regular Helix Launcher
adb push C:/Launcher.apk /system/app/
Put the Launcher in you Local disk
XxKOLOHExX said:
Yup in the other thread people kept talking about different mods and i couldn't fix anything that wasn't wrong with my mod
You need the regular Helix Launcher
adb push C:/Launcher.apk /system/app/
Put the Launcher in you Local disk
Click to expand...
Click to collapse
Can you post upload the apk file, I can't find it nor download it on the market it wont let me :/, btw hows the ROM ?
Please use the apropriate format for reporting bugs or suggestions thank you
YanDroid said:
Can you post upload the apk file, I can't find it nor download it on the market it wont let me :/, btw hows the ROM ?
Click to expand...
Click to collapse
I don't know where to get it as well... But i'll try my best to get a downloadlink
Bug: When you receive a call and try to Respond sliding the green icon on the screen, it doesn't follow your finger and it's hard to get it completly to the right. Only if you do it as fast as the light everything works fine.
What where you doing when you got this probelm: Receiving a call
Comments: Not a big problem since we've got physic key, but sliding is better
AlessandroIT said:
Bug: When you receive a call and try to Respond sliding the green icon on the screen, it doesn't follow your finger and it's hard to get it completly to the right. Only if you do it as fast as the light everything works fine.
What where you doing when you got this probelm: Receiving a call
Comments: Not a big problem since we've got physic key, but sliding is better
Click to expand...
Click to collapse
Thank you and i will get right on it
AlessandroIT said:
Bug: When you receive a call and try to Respond sliding the green icon on the screen, it doesn't follow your finger and it's hard to get it completly to the right. Only if you do it as fast as the light everything works fine.
What where you doing when you got this probelm: Receiving a call
Comments: Not a big problem since we've got physic key, but sliding is better
Click to expand...
Click to collapse
Slide faster, I know what you mean because of the vibration but just swipe faster it should work like 1 maybe 2 times.
video + camcorder
video and camcorder arent listed under known problems in this thread, so i thought i should mention them. video playback (youtube + other streaming video apps) doesnt work- it will freeze on the first frame and continue playing audio in the background. camcorder just doesnt work.
im sure alot of you are saying "there are no video drivers for 2.1, you dumbass" but based on what i read about the rom before downloading, i was under the assumption that it would be mostly/fully working. camcorder wasnt listed under known issues so i thought i wouldnt have a problem with that either.
im not complaining about the rom, its very good in terms of stability, reliability, speed. but for me, i cant use a rom everyday if i have no video recording or playback. hopefully we'll have the drivers and whatever else we need for those to work soon. thanks and keep up the good work!
Its okay I figured out a way, flash marvins ROM, then download Helix Launcher from market, copy to folder, reflash/ fresh wipe then flash yours, push Helix Launcher then BOOM! It should work right? LOL!
XxKOLOHExX said:
Thank you and i will get right on it
Click to expand...
Click to collapse
Now that's the attitude! Thanks for your work!
chabsie said:
video and camcorder arent listed under known problems in this thread, so i thought i should mention them. video playback (youtube + other streaming video apps) doesnt work- it will freeze on the first frame and continue playing audio in the background. camcorder just doesnt work.
im sure alot of you are saying "there are no video drivers for 2.1, you dumbass" but based on what i read about the rom before downloading, i was under the assumption that it would be mostly/fully working. camcorder wasnt listed under known issues so i thought i wouldnt have a problem with that either.
im not complaining about the rom, its very good in terms of stability, reliability, speed. but for me, i cant use a rom everyday if i have no video recording or playback. hopefully we'll have the drivers and whatever else we need for those to work soon. thanks and keep up the good work!
Click to expand...
Click to collapse
Video playback isnt working, video camera does partially work, but freezes when you stop it then it goes to a Non stop FC's when you try opening camera (only resolve is reboot), YouTube HQ only works atm, we don't know why only the best quality works not the low quality. Just be patient, believe it that this ROM is one of the fastest/updated Eclair ROMS you'll come across.
YanDroid said:
Its okay I figured out a way, flash marvins ROM, then download Helix Launcher from market, copy to folder, reflash/ fresh wipe then flash yours, push Helix Launcher then BOOM! It should work right? LOL!
Click to expand...
Click to collapse
Yeah it should... if you get it please upload so i can download
chabsie said:
video and camcorder arent listed under known problems in this thread, so i thought i should mention them. video playback (youtube + other streaming video apps) doesnt work- it will freeze on the first frame and continue playing audio in the background. camcorder just doesnt work.
im sure alot of you are saying "there are no video drivers for 2.1, you dumbass" but based on what i read about the rom before downloading, i was under the assumption that it would be mostly/fully working. camcorder wasnt listed under known issues so i thought i wouldnt have a problem with that either.
im not complaining about the rom, its very good in terms of stability, reliability, speed. but for me, i cant use a rom everyday if i have no video recording or playback. hopefully we'll have the drivers and whatever else we need for those to work soon. thanks and keep up the good work!
Click to expand...
Click to collapse
Video Is one of the issues and i will add it to the list... and Youtube only works on 3G and Wifi on High Quality
Oooh look a new thread!
@XxKOLOHExX - last post until break time - there was a suggestion in one of the other 2.1 threads that changing ringtones to .ogg format may make the rom a little more responsive when taking incoming calls. Maybe you could test this for us? Would changing all alarms / ringtones / notifications to .ogg format make the whole rom any more responsive?
MarvinTheAndroid said:
Oooh look a new thread!
@XxKOLOHExX - last post until break time - there was a suggestion in one of the other 2.1 threads that changing ringtones to .ogg format may make the rom a little more responsive when taking incoming calls. Maybe you could test this for us? Would changing all alarms / ringtones / notifications to .ogg format make the whole rom any more responsive?
Click to expand...
Click to collapse
It's a slight speed increase... I only use .ogg ringtones so yes i could change up some ringtones and get only .ogg formatted ones
Here is Orginal Helix Launcher.
LostEden said:
Here is Orginal Helix Launcher.
Click to expand...
Click to collapse
Thank you alot
Q&A for [ROM] [OFFICIAL] Omnirom nightlys
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
It is possible to record video in 60 fps 1080p without slo-mo in your rom?
NewYorkStar said:
It is possible to record video in 60 fps 1080p without slo-mo in your rom?
Click to expand...
Click to collapse
Its not implemented now.
it is possible on my xperia z2... but not on my oneplus... i like this feature two
Anyway to change the vibration intensity?
Hi , i'm using this ROM (KK one) since yesterday. I got a problem .
Can't use the swipe keyboard.
When i use it, i see the gesture on the screen but no input in the input field.
I'm alone ?
Thanks
Hello everyone! Somebody can tell me why if I flash franco kernel on the last nighly, the phone goes in bootloop?
Hi, sorry for noob question but, how can i make a screen shot with this ROM ?
Tried with volume down + on/off with no luck and can't find option to have the screen shot option in the power down menu ....
Display auto rotate doesn't work
hi!
i flashed yesterday the 20150629 nightly.
Everythink is running quite good but i have the problem, that all my sensors are not available (e.g. Display auto rotate doesn't work).
I think this is an known bug, but i can't find any solution.
Do you have any ideas?
Runs hot and drains battery really quick
On the nightlies, my oneplus One gets hot in my pocket and battery life is horrible. Any one else having these issues?
I am unable to install maxxaudio ricardopvz version . audio fx FCS. Please help.
With the 20th my phone doesn't start
musklor said:
With the 20th my phone doesn't start
Click to expand...
Click to collapse
Hi, you need to provide a little bit more info, did you clean wipe, is your recovery updated, did the MD5 for the rom file check out ok?
Q&A for [ROM]★[TF300 KitKat 4.4.4][ZOMBi-X OMNI KANG B4[Oct 8]★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
3G and HDMI ?
1. What about 3G on TF300TG version, does it works or did you plan? .. in thread with "xubuntu on TF300TG" works
2. What about HDMI output, especially "crop and zoom functions" which were in 4.1 and disappeared in 4.2
Anyway, thank you, i really appreciate it.
wincore said:
1. What about 3G on TF300TG version, does it works or did you plan? .. in thread with "xubuntu on TF300TG" works
2. What about HDMI output, especially "crop and zoom functions" which were in 4.1 and disappeared in 4.2
Anyway, thank you, i really appreciate it.
Click to expand...
Click to collapse
i dont think 3g works mate but im not 100% sure on that but i know that hdmi is working fine for me but not sure about crop and zoom
Hrm,
You think it would be nice if XDA actually let us know in some way that these Q&A threads were automatically created.
Anyway so no there is no 3g capability in this rom, as we don't have source to make it, and none of us own a tf300tg so there is no way we can test.
HDMI does work but i don't really understand this whole crop thing?....
does anyone else the showbox app on this rom? for some reason it says i have no internet connection but i do lol
It seems to be working now guys
hey guys how do you change to performance mode i cant seem to find the option for it anywhere
robgee789 said:
hey guys how do you change to performance mode i cant seem to find the option for it anywhere
Click to expand...
Click to collapse
Click seven times on the Build option under "About" in settings to enable Dev. Options. Then go to Performance in Settings and you can change anything from there.
i found an app in the grimlock kernel thread the works perfect mate
Just a curious question, not trying to complain as I enjoy this ROM...
I am just having ongoing issues that have persisted across all versions.
Screen delayed up to a minute when pressing power button to turn on/unlock, ect...
Having a lot of persistent lock ups after tablet has set overnight especially and upon opening any given app requiring a long press of power button to force a reboot.
Persistent lag but seems to go away for awhile again, after a reboot.
Any ideas on how/where/what to troubleshoot?
Thanks
hey guys does art work on this rom?
Has anyone had trouble accessing flash websites using Dolphin Browser or Firefox? I chose to install flash through aroma. Is there a bug when using that selection?
Also has anyone used Skype and get audio from the other party but they can't hear you?
Sent from my SM-N900V using Tapatalk
Sent from my TF300T using Tapatalk
mo2002 said:
Has anyone had trouble accessing flash websites using Dolphin Browser or Firefox? I chose to install flash through aroma. Is there a bug when using that selection?
Also has anyone used Skype and get audio from the other party but they can't hear you?
Sent from my SM-N900V using Tapatalk
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
The flash issue is known and @hardslog said he had a fix for this ...
We have all just been very busy with L release and what not ....
So you are saying your mic is not working ?
Thx Josh
I only tested once with the mic but I will test again. I was just inquiring if any of these things have arose for you guys.
Sent from my SM-N900V using Tapatalk
Ok, I did something stupid. Trying to figure out why my Titanium Backup Pro purchased license was no longer working and would only load TIBU as "Free" version and since this rom switched from SuperSU to superuser, thus you get that warning that some things might not function correctly, ect... in Titanium Backup and it apparently prefers SuperSU, I flashed the latest beta from recover of SuperSU...
Well everything seemed fine and well as SuperSU now showed in Settings, however noticed the SuperUser app in the drawer was no longer there and apps were still gaining root access through superuser. This didn't fix issue with TIBU either.
So in an attempt to put things back to intended by this ROM, and get my superuser app back in the drawer, I chose the option within SuperSU to remove to previous root app or whatever.
Issue: I still have root being issued via Superuser, however, the Superuser app is gone from the apps drawer and I can no longer load/access it.
Question: Can I somehow unzip superuser.apk or whatever from the ROM's .zip and if so, place it where intended as in (directory) say using "root explorer" ect... and get that app access back
thanks for the rom, it works great very snappy.
is there any way to disable the windo resizing? wwhen i open chrome browser it starts off in window mode and if i try to zoom in on the webpage the whole window starts to change sizes.
is there a way to have full screen only or to lock it at a specific size?
thanks
unit68 said:
thanks for the rom, it works great very snappy.
is there any way to disable the windo resizing? wwhen i open chrome browser it starts off in window mode and if i try to zoom in on the webpage the whole window starts to change sizes.
is there a way to have full screen only or to lock it at a specific size?
thanks
Click to expand...
Click to collapse
That's a problem specific to the latest version of Chrome.
If I get an older version will it be ok?
Sent from my SM-G900W8 using XDA Free mobile app
unit68 said:
If I get an older version will it be ok?
Sent from my SM-G900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, the prior version (38.0.2125.114) works great. It only floats when you want it to.
CLOSING THE THREAD
MORE TO COME WHEN LOLLIPOP IS READY TO GO .....
DOWNLOAD LINKS WILL REMAIN UP FOR AT LEAST THE NEXT MONTH ......
THX Josh
Q&A for [ROM][5.1.1] Resurrection Remix 5.4.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1] Resurrection Remix 5.4.6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Empty Performance fix
I Don't know if this has been said before, but the options in the performance screen in the settings app become visible when you enter developer mode by tapping the build number 7 times
haky 86 said:
-Video recording: fixed
Click to expand...
Click to collapse
Hope that aosp will be fixed too
much more free ram and really smooth! great job
flashlight not working in the toggles menu but working with google now voice control ^^''
is it really M launcher?
for what I've seen it should have a different app list drawer (vertical with letters) but it's just like the old one.
paradox_ said:
much more free ram and really smooth! great job
flashlight not working in the toggles menu but working with google now voice control ^^''
is it really M launcher?
for what I've seen it should have a different app list drawer (vertical with letters) but it's just like the old one.
Click to expand...
Click to collapse
Go to drawer settings and set it to vertical
Not working flashlight
Lockscreen Clock Issue - Reusrrection Remix Rom
Hi!
I want to ask you if any of you have had the same issue. On any custom ROM that I have installed on my Galaxy S2 PLUS the clock on the lockscreen is not perfectly centered. Do any of you have this problem? Sometimes I had the impression that it was just me, and the clock was centered, but after verifying I can say it is no centered, especially when I enable the 24 hour format option. Any solutions/ explanations for this situation? Thanks.
I used v5.4.8
Call&screen capture video not recorder with external app
sorry for bad English!
What I can used gapps?
Compile offer
Hi i see you hae space problems, let me use your code to compile it on my machine and I will hand it to you without asking anything in return. I just wanna have M preview or if not possible the latest RR asap.
Maybe one day I will know how to get along with the device tree.
I have a powerfull kingston Fury SSD so the compilation will be ridiculously fast. And cable connection, so upload will be fast too!
C4f4s0g0 said:
Hi i see you hae space problems, let me use your code to compile it on my machine and I will hand it to you without asking anything in return. I just wanna have M preview or if not possible the latest RR asap.
Maybe one day I will know how to get along with the device tree.
I have a powerfull kingston Fury SSD so the compilation will be ridiculously fast. And cable connection, so upload will be fast too!
Click to expand...
Click to collapse
Sounds great.. @haky 86 what do you think ?
Hey someone else having problems with low incall volume ? I even changed the internal speaker... the volume is way to low i having hard time doing a voice call.
fantastic
I just clean flashed this rom and it works absolutely great. Thank you very much for that awesome stuff.
But how do I set a wallpaper for the lockscreen? There is no option to do that in the gallery (or QuickPic).
Does USB OTG work?
Memory leak
does anyone have the memory leak error again?
Is there a way to disable dynamic contrast? For example when I'm on fb messenger, user avatar is over contrasted because of huge white space that messaging takes... Same for Google play...
some bug is there...pls check sir.....
Resurrection-Remix-LP-v5.5.0-20150706-i9105.zip
Sir, I have installed latest build(LP-v5.5.0-20150706-i9105.zip) but ,there is no default ringtone.(ringtone none). how to solve this issue? Pls help me.....
"android.process.media" stop working
I've a little problem: when I tap on download manager, "android.process.media" stop working. How can I do?
great
hi ,I installed (many times) Resurrection-Remix-LP-v5.5.1-20150722-i9105p.zip, but in menu I do not see the buttons switch(wi-fi,bluetooth,etc etc )
how can I fix
i'm sorry for my english
Some of you may not notice, but I'm sure there are a few that do. Touch screen responsiveness on custom ROMs or GSI's for Mata is working, but is definitely not as fluid as stock.
Easiest way to tell is just typing on the keyboard and taking note of the shot delay in between touches. For me, I type fast, and this causes spelling mistakes often, because the touch screen (on a ROM or GSI.) doesn't register as it does on stock.
Next is mobile gaming. Touch seems to be a total hit and miss here, and sometimes won't work at all unless one finger is already on the screen. That's not a big deal, because a simple reboot fixes this temporarily. This was fixed a while ago here, if I recall correctly:
https://review.lineageos.org/c/LineageOS/android_frameworks_native/+/198809
Overall I am hoping to find a fix for this touch responsiveness issue. It effects a ton of aspects of this phone and prevents me from staying on ROMs, and resorting to restoring backups to use my phone properly again.
I've tried messing with the build.prop, switching kernels, checked out various forums and attempted things I probably shouldn't have tweaked with, but still have had no luck figuring this out on ROMs or GSI's. Yet on Stock everything functions properly, and touch is no issue.
Can anyone shed any light on this at all? (To clarify there are 2 issues here: general delay in touch, and touch screen not working after a while on games.)
Hi, I just flashed gsi rom yesterday and also found it more laggy than stock. I tried to search for a way to improve it but failed. Please let me know if you find a way to solve this problem.
Actually I flashed it just to make the stasus bar shorter and make it possible to disable navigation bar. I may change back to stock if I find any method to do so on it.
lovelock8353 said:
Hi, I just flashed gsi rom yesterday and also found it more laggy than stock. I tried to search for a way to improve it but failed. Please let me know if you find a way to solve this problem.
Actually I flashed it just to make the stasus bar shorter and make it possible to disable navigation bar. I may change back to stock if I find any method to do so on it.
Click to expand...
Click to collapse
Still trying different things, but so far no luck, touch remains a bit laggy. Gonna try something later though, are you currently on a GSI with Root?
In: system / usr / idc there should be some .idc files, I wonder if there are some entries on stock that aren't in GSI's or ROMs?
I dunno, just shooting in the dark here.
MoistPicklez said:
Still trying different things, but so far no luck, touch remains a bit laggy. Gonna try something later though, are you currently on a GSI with Root?
In: system / usr / idc there should be some .idc files, I wonder if there are some entries on stock that aren't in GSI's or ROMs?
I dunno, just shooting in the dark here.
Click to expand...
Click to collapse
Yes,I rooted it. I just checked idc folder of my stock room restore, there are no more but 1 less idc file in the stock rom. I copied the entire idc folder to main storage, restored the gsi room and replaced it. I don't think it makes obvious change,at least did not make the touch screen as good as the stock.
But I did flash elemental-x kernel after flashing gsi. It might have make it better? Maybe I just got used to the sensitivity of gsi but you may try to flash the kernel and replace the folder, see if any changes are noticed.
I'm running the latest HavocOS GSI build with the neutrino gemini kernel. Also using Ex Kernel Manger so the settings will stick or can be changed. No touch lag or the like on my end. Very smooth.
hx3 said:
I'm running the latest HavocOS GSI build with the neutrino gemini kernel. Also using Ex Kernel Manger so the settings will stick or can be changed. No touch lag or the like on my end. Very smooth.
Click to expand...
Click to collapse
Is the status of Havoc OS as high and wide as the stock room? Or is it just normal size as on other Android devices? Considering transfer to it.
lovelock8353 said:
Is the status of Havoc OS as high and wide as the stock room? Or is it just normal size as on other Android devices? Considering transfer to it.
Click to expand...
Click to collapse
Unfortunately, the latest build of HavocOS is from October 27th. However, you can still use the latest December firmware/security update from Essential.
There is one bug with it, at least for me and others, and it's the fingerprint sensor doesn't work for us. It doesn't show up in Settings either. It worked on previous builds, though. Not to knock the developer at all, as I appreciate the work that has been put in.
As far as the "normal size" you brought up... Are you referring to file size? If so, it's in the same ballpark as any other stock/stock-ish ROM that doesn't include gapps. I used Pico gapps, as I don't use many Google apps. Hopefully that answered your questions.
hx3 said:
Unfortunately, the latest build of HavocOS is from October 27th. However, you can still use the latest December firmware/security update from Essential.
There is one bug with it, at least for me and others, and it's the fingerprint sensor doesn't work for us. It doesn't show up in Settings either. It worked on previous builds, though. Not to knock the developer at all, as I appreciate the work that has been put in.
As far as the "normal size" you brought up... Are you referring to file size? If so, it's in the same ballpark as any other stock/stock-ish ROM that doesn't include gapps. I used Pico gapps, as I don't use many Google apps. Hopefully that answered your questions.
Click to expand...
Click to collapse
Thank you for your information!
I'm sorry I mistyped the question. Actually what I wanted to ask was the status bar, which bothered me a lot on the stock rom. I flashed to pixelexperience specially for changing the status bar height to normal (and being able to disable navigation bar completely). I don't know why it was so hard that I didn't find any way to do so on stock rom.
lovelock8353 said:
Thank you for your information!
I'm sorry I mistyped the question. Actually what I wanted to ask was the status bar, which bothered me a lot on the stock rom. I flashed to pixelexperience specially for changing the status bar height to normal (and being able to disable navigation bar completely). I don't know why it was so hard that I didn't find any way to do so on stock rom.
Click to expand...
Click to collapse
Oh, yeah, that's the other "issue" people have had with HavocOS on the PH-1. The status bar is very thin...About 50% too thin, and I don't know of any way to change it. It doesn't really bother me after getting used to it. I'll have to try out Pixel Experience, though. I do miss the fingerprint sensor working properly.
hx3 said:
I'm running the latest HavocOS GSI build with the neutrino gemini kernel. Also using Ex Kernel Manger so the settings will stick or can be changed. No touch lag or the like on my end. Very smooth.
Click to expand...
Click to collapse
Thanks for the input, pretty sure I have already tried the Oct 27th Havoc OS with Neutrino and still had those touch issues with games, but I will give it another shot in case, did you by chance modify a few things with EX Kernel Manager?
hx3 said:
Oh, yeah, that's the other "issue" people have had with HavocOS on the PH-1. The status bar is very thin...About 50% too thin, and I don't know of any way to change it. It doesn't really bother me after getting used to it. I'll have to try out Pixel Experience, though. I do miss the fingerprint sensor working properly.
Click to expand...
Click to collapse
The status bar is also thin pixelexperience if you care. Aside from the touch screen latency, I haven't noticed any other issue on this rom, so I recommend you give it a try.
Tried Havoc OS paired with Neutrino, and tweaked around with EX Kernel Manager last night for a while, but still had issues with touch on games and keyboard. Literally everything I have tried on custom installations has not helped improve touch responsiveness.
Come on, surely some random dev still lurks these forums who also notices these delays in touch. Would love to help solve this if I knew exactly where to start, and am willing to test or tweak to get this resolved.
No idea if this will help, but it's easy to try. In developer settings, find grip rejection and try toggling it on. Else, in the same place, try adjusting touch sensitivity.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
ktmom said:
No idea if this will help, but it's easy to try. In developer settings, find grip rejection and try toggling it on. Else, in the same place, try adjusting touch sensitivity.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Click to expand...
Click to collapse
Grip rejection and touch sensitivity aren't available in GSI's unfortunately, but even some ROMs that do include those settings still have delayed touches, and games eventually lose touch until you reboot on occasion.
Compared to stock, the only ROM that had touch working perfectly (like stock) was Kuran's AICP O. I suspect this has something to do with his kernel, but I am just speculating, I can't be sure on that one.
Then even on a GSI with a stock kernel I still get touch issues, so I have a feeling it has something to do either something in /system but then again, I'm still guessing.
But I appreciate the reply thank you for chiming in on this. ?
The only reason I suggested that "fix" was when I was running AOSiP Pie, that was the only way to get rid of the lag. Simply toggling the grip rejection solved the problem immediately.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
ktmom said:
The only reason I suggested that "fix" was when I was running AOSiP Pie, that was the only way to get rid of the lag. Simply toggling the grip rejection solved the problem immediately.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Click to expand...
Click to collapse
Huh, last time I was on AOSiP Pie (maybe a week ago) I still had touch issues, but hell, for some awesome customization, maybe it's time for another try on that. Thank you, by the way, I really dig that signature of yours.
MoistPicklez said:
Huh, last time I was on AOSiP Pie (maybe a week ago) I still had touch issues, but hell, for some awesome customization, maybe it's time for another try on that. Thank you, by the way, I really dig that signature of yours.
Click to expand...
Click to collapse
Throw a setprop in front of these... And reboom... See if it helps
persist.vendor.qti.inputopts.enable=true
persist.vendor.qti.inputopts.movetouchslop=0.5
rignfool said:
Throw a setprop in front of these... And reboom... See if it helps
persist.vendor.qti.inputopts.enable=true
persist.vendor.qti.inputopts.movetouchslop=0.5
Click to expand...
Click to collapse
Thanks will try this tonight.
So I'd just use:
adb shell
Then
setprop (entry here)
?
MoistPicklez said:
Thanks will try this tonight.
So I'd just use:
adb shell
Then
setprop (entry here)
?
Click to expand...
Click to collapse
Sure...
But why for you no have magisk?
rignfool said:
Sure...
But why for you no have magisk?
Click to expand...
Click to collapse
Edit: I think I may have gotten it figured, and at least narrowed down the issue. I Installed Havoc OS 10-27 again with Dec-patched-boot.img, then Neutrino Hercules over that, on both slots, changed CPU to performance and enabled touchboost, then added these lines to my build.prop and rebooted:
persist.vendor.qti.inputopts.enable=true
persist.vendor.qti.inputopts.movetouchslop=0.6
So far so good, touchscreen jank is gone, scrolling isn't bad at all, and best of all games seem way more fluid. Will continue to test it out.
Edit 2: So far so good games haven't lost touch, not even once, games are still fluid and there are literally no touch delays when gaming or typing. So either the kernel (with performance mode and touch boost on) or the entries I added to the build.prop have fixed this finally. Or both. So freakin' happy.