firstly you should have the required thing:
1)upgrade tool.exe
2).PAC file
3)a little brain use
instruction:1st load your package in upgradetool and then wait for the loading of packet at the lower left hand side of the upgrade tool windows,now don,t close this window,just minimize it.
2nd and the last step just press windows logo key+r or simply go to run program and type %temp% and press enter that's it you will found a folder named something like downloadxxxxxx open that voila found all files,just copy them to anywhere in your disk.
tips: if you are not able to find it so clear temp folder completely and repeat the steps and you will surely get your file.
If you like my post please rate it
Sent from my ST21i using XDA Free mobile app
Any way to extract .pac on Linux ?
timahvo1 said:
Any way to extract .pac on Linux ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/spreadtrum-pac-file-extractor-t3900323
Related
THIS WAS EASY AT FIRST NOW ITS GOT CONFUSING
I NEED HELP WITH THE CID ULOCKING PHONE PART
5. Extract the afore mentioned file to the root of your C drive. Do NOT extract to a folder with spaces...
6. Open Activesync WITH YOUR DEVICE NOT CONNECTED! and delete your partnership.
7. Connect your device and cancel the partnership. (You're a guest )
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
Click to expand...
Click to collapse
THE THING IS I DONT GET PARTS 5,8, AND 9 SO PLEASE SOMEONE CAN HELP IM IN THE MIDDLE OF THIS THING
I dont know whats there to get
5. Extract the lokiwiz to your C: hard drive. Dont make any folders. Just into "C:\".
8. Take the enablerapi.cab from the extracted folder. Copy it (ctrl+c), go to Active Sync and click on Explore (that file explorer thing) and the resources of your device will be displayed. Paste (ctrl+v) the copied before enablerapi.cab anywhere you want.
9. Take your Wizard in your hand, go to File Explorer (in Programs). Find the enablerapi.cab on your device and click on it. It should begin installing.
P.S. Dont use capslock please.
ok i got up to the part in the MS Dos Prompt and i hit the "u" button to unlock but it never rebooted by it self
Paste here the ms-dos commands that appear after pressing "u".
http://img412.imageshack.us/my.php?image=untitledrf0.jpg
vlodeck said:
I dont know whats there to get
5. Extract the lokiwiz to your C: hard drive. Dont make any folders. Just into "C:\".
Click to expand...
Click to collapse
xSNOWCAT said:
http://img412.imageshack.us/my.php?image=untitledrf0.jpg
Click to expand...
Click to collapse
So don't start it on "c:\documents and settings\joey" like your image is showing..
oh start it in the C Drive no certain folder?
lol.. That's what the instructions say ..
ok i did that but now it says
invaild command because when i open the MSDos it starts off with
C:/Documents and Settings/Joey
when the file isnt there
I'm sorry, but based on this thread, you are in no way ready to be trying to unlock and flash your phone. It sounds to me like you aren't familiar with how DOS (Windows CMD) works.
Use the command:
cd c:\ to get to the root directory. Then go from there.
http://img20.imageshack.us/my.php?image=untitledtu3.jpg
You sure you're connected with Active Sync?
as a guest. and i dont have the logo on the bottom of my phone
nvm i made a dumb mistake i got WOOO
closing thread.
How do i extract the file????
What is it you actually want to do?
i just wanna play around cook my own rom
bonee said:
How do i extract the file????
Click to expand...
Click to collapse
Execute the RUU on your PC and let the app screen come up. While the app is opened you will then find a ROM.zip file in one of the subdirectories under the %TEMP% directory. Once you find it, copy it to your desktop or another directory because as soon as you close the app the file will get deleted.
Use WinRAR or a similiar program to extract the RUU to a folder. Inside you will find the ROM. Please search before posting as this has been answered many times.
Moderated from my Galaxy Tab using Tapatalk
Good Morning All,
I am posting this because I couldn't find anything about this on here. For you who are looking on the temp location that Smart Switch creates when downloading the Stock Firmwhere (.md5) file for the Galaxy S6 Edge, for me it was the location below. I am using a sprint Version SM-G925P. not sure if this will apply to you or not, but worth a try. you will need to initiate the download from Smart switch once it starts downloading, you can unplug your phone from the PC (that way your phone doesn't get wiped). After download reaches 100% go to the file location. copy the file rid away and paste it to your desired folder.
C:\Users\UserName\AppData\Local\Temp\tmp2953.tmp.zipfolder
hope this helps.
C:\Users\yourname\AppData\Local\Temp\Binary\SM-G920F\
does anyone know if there is any way of changing the default folder to witch Smart Switch downloads the firmware?
looks like my system disk doesn't have enough space for the download and there's really NO WAY I could free any more of it
spnk said:
does anyone know if there is any way of changing the default folder to witch Smart Switch downloads the firmware?
looks like my system disk doesn't have enough space for the download and there's really NO WAY I could free any more of it
Click to expand...
Click to collapse
They don't want you to know where it is, so no.
Just go to the folder mentioned in the OP and search by date. It is usually named "tmpBABC.tmp" when being downloaded. Just find the same file size(around 2GB)
KillTheSprint said:
They don't want you to know where it is, so no.
Just go to the folder mentioned in the OP and search by date. It is usually named "tmpBABC.tmp" when being downloaded. Just find the same file size(around 2GB)
Click to expand...
Click to collapse
no md5 file. it about 160 mb for my core prime. how to use that
There is a way to change default download location of firmware!!
KillTheSprint said:
They don't want you to know where it is, so no.
Just go to the folder mentioned in the OP and search by date. It is usually named "tmpBABC.tmp" when being downloaded. Just find the same file size(around 2GB)
Click to expand...
Click to collapse
Actually there is a way to change the default download location of the firmware!
You can even change it to a different drive!
follow the steps:
1) Right click on my computer
2)click on properties
3) click on advanced system settings.
4)Click on Environmental Variables.
5)Under Variables, you will observe "TEMP" and "TMP". click on Temp and click EDIT. Change location to desired path. You can even puth a location path of a different drive. does not necessarily ave to be your system installed drive.By default the location is %USERNAME%....... Now repeat the same process for TMP, change location to the same desired path that you have chosen before.
6)OK, apply, Ok
7)Re-boot your computer, laptop (system). This is very important as the changes do not take effect until a re-boot.
8)Voila!! now smart switch will download the firmware to your desired location/path.
Thank me if you found this useful!!
1. Browse to C:\Users\yourname\AppData\Local\Temp
2. In the windows search bar enter "*.md5"
Do this while it is installing
for me in windows 10 this is the pathe
C:\Users\Andrei\AppData\Local\Temp\Binary\SM-J710FN\BGL\XX
iaimmiac said:
1. Browse to C:\Users\yourname\AppData\Local\Temp
2. In the windows search bar enter "*.md5"
Do this while it is installing
Click to expand...
Click to collapse
or even better than *.md5 is just to write to search field "ext:.md5" (without quotes ofcourse and "ext:" must be shown in blue color..
freemanandrei87 said:
for me in windows 10 this is the pathe
C:\Users\Andrei\AppData\Local\Temp\Binary\SM-J710FN\BGL\XX
Click to expand...
Click to collapse
yes, mine is the same. it's a large file (more than 2GB) without ext name.
i just wonder what type it is, and how i can open it/ extract it to flash it with odin...
xdauser'17 said:
yes, mine is the same. it's a large file (more than 2GB) without ext name.
i just wonder what type it is, and how i can open it/ extract it to flash it with odin...
Click to expand...
Click to collapse
Wait for smart switch to decompress it first.
robdevil said:
Wait for smart switch to decompress it first.
Click to expand...
Click to collapse
yes, that's a way. but if i have bricked my phone, and all i can do is entering download mode, it won't proceed to decompress it. cuz samsung recently removed emergency reset feature in smart switch. ( i mean, the firmware file can be downloaded by enabling 'latest software predownload', but it won't decompress it until a working phone is connected...)
dodobila said:
C:\Users\yourname\AppData\Local\Temp\Binary\SM-G920F\
Click to expand...
Click to collapse
this one is right...thanks
Sorry for using this old thread, but it matches my intention in some way.
I'd like to update via Smart Switch by placing the downloaded updates to the folder(s) mentionned above.
No matter where I place the files, no joy.
Is there a dedicated name convention I have to follow?
Any suggestion appreciated.
Hi,
Since the 20170425 release of Android 7.0 tends to lock the bootloader on this phone, I thought it would be interesting to share the files that can boot it without locking your bootloader.
The preloader and lk are from previous release of Android 7.0.
Instructions:
Download this ROM: https://www.needrom.com/download/doogee-y6-7-0-2/
Download the fix: https://mega.nz/#!9MMzyZpC!W2mkaAEKxrYL0uWVnNXxS8ao31AShoAgxNBFIJhD438
Extract both files with WinRAR or 7zip
Go to the extracted ROM folder and delete these files: preloader_hct6750_66_n.bin , lk.bin
Copy everything from the extracted DOOGEE-Y6_Nougat-FW folder.
Paste them in the extracted ROM folder and replace the existing ones! Make sure that you replaced the existing files!
Open SP Flash Tools and load the scatter file.
Choose "Firmware upgrade" and click "Download".
Power off your phone
Connect it to the phone with USB cable.
Flashing process will start.
Wait till the end. You'll see a big green button saying "OK".
Disconnect your phone power it on.
Done.
Click to expand...
Click to collapse
Big thank you for the fix... BUT
Much appreciate the hard work you have done on this nice phone, kudos
BUT yeah there is always one eh
You accidentally left out the remark to delete the "ik-verified.bin" file, which must be deleted as per your post on needrom.
Hope you don't mind I put that in a comment on here.
ANYHOO Thanks a bundle again (I wish I was a rich man, then I would donate you a bundle)
As title says everything, i was trying to find out how to generate bin.md5 file for ported ROM's files but not found anything on google even on XDA too
So finally i decided to start from me,i researched and guess what? i have successfully generated bin.md5 file for
ported ROM and flashed costume qualcomm ROM to my mobile
so Lets start guid...
Today i will show you how to generate bin.md5 file of multiple files in directory
yes, can be used for ported ROM's too ....
ok
download the sfk application
Here is file...
Password-
ONNTECHSOFT
Click to expand...
Click to collapse
Note:- A software Creadit gose to StahlWorks Technologies
now move/copy that file to any good location
here is, i am using D drive and so,moved that file in new folder called tools
again i have moved to multi_download (because my ROM Files is located in multi_download folder )
ok
Now create new text fine any other location (f.e. desktop ) and type
all file name(which you want to generate for) with there extension's
for example- system.img system_1.img (don't forget to add "space" between files)
ok
now open CMD to locating that folder
by pressing shift button + mouse R click
Now in CMD, Enter
sfk
Click to expand...
Click to collapse
press Enter
ok now type following
sfk md5gento=outfile
Click to expand...
Click to collapse
after outfile past all that file names written in new text file
for example-
sfk md5gento=outfile system.img system_1.img
Click to expand...
Click to collapse
and press enter
it will genrate md5 file
(file with name output will generated )
now rename output file to bin.md5 file
Thats it......
if you stuck on any step ,then dont forget to watch this video....:good:
All Done ...
If you like my work then dont forget to press thanks and
Please Dont Forget to Like , Subcribe , Share My Channel ONNTECHSOFT
Thanks
Yours
Raj Kumar
Aka
76Raj
TC All....:highfive: