Welcome to Frosted Kernel for the HTC One XL (Elite/Evita)
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
Why I created a SECOND kernel:
So for those of you living under a rock (jk), I already maintain Void Kernel for the One S, so why would I bother creating another? Well @Rapier started having issues, so I PM'd him a patch. He sais he would test it later but commented on how Void LP and IceCode LP were feeling a bit sluggish (they share the same base) where as the stock CM 12 Kernel is super smooth. I then tried the CM 12 stock kernel and realized that he was right. So I forked the CM stock kernel and added some basic features and sent it to him. He commented on how the OC values weren't sticking properly and the Benchmarks were really low but how it was smooth. So I fixed the OC, and added @show-p1984's MSM_MPDEC and MSM_THERMAL to speed it up and when I benchmarked it, I got 6788 in quadrant. That was a couple of hours ago. Now, I'm releasing it into the wild. The main focus of the Bricked Edition (like Bricked Kernel before it) is speed and stability. Undervolting is doable but you have to do it yourself and if you get random reboots I will not help you there. Enjoy Frosted Kernel everybody!
Post #1: Disclamer, Why I created this Kernel
Post #2: Download and Features for Bricked Edition
Post #3: Changelog for Bricked Editon
Post #4: Reserved
Post #5: Reserved
Post #6: Link to Discussion Thread
XDA:DevDB Information
Frosted Kernel, Kernel for the HTC One X
Contributors
javelinanddart, Rapier, jrior001, rmbq, AKToronto, CM Team, Flashalot, Candy5 Team, show-p1984, flar2, faux123
Source Code: https://github.com/FrostedKernel/android_kernel_htc_msm8960
Kernel Special Features:
Version Information
Status: Stable
Created 2015-02-24
Last Updated 2015-03-03
Bricked Edition Features:
Compiled with the Lastest Linaro Toolchain Optimized for Cortex-A15 by @Christopher83
Compiled with -O3 Optimization
XZ Compression (-O3 creates larger code, need it to keep it in check)
Voltage Control by @faux123
CPU Overclocking to 1.836GHz (Stable too!)
CPU Underclocking to 192MHz (Also Stable)
GPU Overclocking to 512MHz (Stable but phone gets really warm)
BLN by @rmbq
TCP Congestion Control Algorithms: Bic, Cubic, Westwood (default), HSTCP, Hybla, Vegas, Scalable, Low Priority, Veno, Reno, YeAH, and Illinois
CPU Governors: Performance, Powersave, Userspace, Ondemand, Interactive, Conservative, Intellidemand, Intelliactive, Intellimm, TRIPNDROID, Lionheart, Badass (default), SmartassV2 (disabled), ElementalX, and Preservative
GPU Governors: Ondemand, Performance, and Simple
I/O Schedulers: Noop, ROW, Deadline, CFQ, BFQ, FIOPS (default), SIO, SIO Plus, FiFo, TRIPNDROID, ZEN, and Vr
MSM_MPDECISION and MSM_THERMAL by @show-p1984
MSM_MPDECISION Input Boost Available
Lastest CAF + Latest Linux 3.4 Source
Vibrator Intensity Control
Amazing Build Flags
Fast Charge
Module Support
Export Krait Variant
exFAT Support
UTF-8
FRANDOM Support
Asynchronous Fsync
KCal Control by @faux123
Sound Control by @faux123
91% Compatible with KControl
F2FS Support
Frosted Bricked Installer Features:
AROMA Installer with Holo Theme
License (GPLv2)
Terms of Use (Disclaimer)
Changelog
Date Updated
Kernel Edition
Confirmation Screen
Reboot Option at the End
Add Init.d Support
Enable Insecure Kernel
Remove Governor Overrides
Things to do:
Command Line Interfacing
Downloads:
https://www.androidfilehost.com/?w=files&flid=26767
Code:
[SIZE="5"][B]Bricked Edition Changelog:[/B][/SIZE]
Mar 01
-QSEECOM
-SELinux Permissive
-Disable Wake Controls
-Modules Support
-TCP Congestion Control Algorithms
Feb 24
-Initial XDA Release
Feb 23
-Initial Release to @Flashalot, All of the Features Mentioned In the Above Post
-MSM_THERMAL Board File Hooks
-Wake Controls for Synaptics 3200 Touchscreen
Reserved 1
Reserved 2
Please Keep All Discussion Questions in the Discussion Thread (Q&A TAB)
javelinanddart said:
Reserved 3
Click to expand...
Click to collapse
sorry, is not the good forum. This forum is for HTX ONE X Endeavoru, not Evita.
tortellini said:
sorry, is not the good forum. This forum is for HTX ONE X Endeavoru, not Evita.
Click to expand...
Click to collapse
I know, but DevDB wasn't letting me choose HTC One XL. I'm going to have a mod move it
Your voltage table is... dangerous. You have it set to nearly 1.4v at the high end which can damage these chips. My phone locked up after flashing. Also you seem to be using the "qualcomm" voltages (1.15 volts) for every other level which is unstable on phones with fast-binned CPUs like mine. Can you provide a version with the normal voltage table?
ThisWasATriumph said:
Your voltage table is... dangerous. You have it set to nearly 1.4v at the high end which can damage these chips. My phone locked up after flashing. Also you seem to be using the "qualcomm" voltages (1.15 volts) for every other level which is unstable on phones with fast-binned CPUs like mine. Can you provide a version with the normal voltage table?
Click to expand...
Click to collapse
I'll give you an init.d script
Flash it in TWRP and you're good to go
deleted
great kernel, everything works smoothly and the performance is (subjectively) way better than stock! thanks!
however, DT2W seems to be broken and causes hard reset.
one question: how do i control vibration intensity?
thanks!
thelonewolf_pav said:
great kernel, everything works smoothly and the performance is (subjectively) way better than stock! thanks!
however, DT2W seems to be broken and causes hard reset.
one question: how do i control vibration intensity?
thanks!
Click to expand...
Click to collapse
Does Swap work? Is there a certain kernal control application that works best with this kernal or do I have to manually change it.
harpin14789 said:
Does Swap work? Is there a certain kernal control application that works best with this kernal or do I have to manually change it.
Click to expand...
Click to collapse
swap works like a charm. been using this kernel for 3 days now, buttery-smooth, definitely way better than stock. i need to compare it to Torched, but at this point i definitely recommend flashing this kernel over the stock one.
re kernel control app, i use Kernel Tuner and Trickster Mod. these two seem to cover everything i need.
thelonewolf_pav said:
great kernel, everything works smoothly and the performance is (subjectively) way better than stock! thanks!
however, DT2W seems to be broken and causes hard reset.
one question: how do i control vibration intensity?
thanks!
Click to expand...
Click to collapse
I'll disable wake controls then
Use trickster mod, in the specific tab
I'll try to build a new update today
Changelog:
QSEECOM support
SElinux permissive
Wake Controls disabled
javelinanddart said:
This will also become the official Candy5 kernel for Evita (rebranded there ofc)
Click to expand...
Click to collapse
that's great news! congrats
javelinanddart said:
I'll try to build a new update today
Changelog:
QSEECOM support
SElinux permissive
Wake Controls disabled
This will also become the official Candy5 kernel for Evita (rebranded there ofc)
Click to expand...
Click to collapse
Would there be any chance that wake would come back in the future?
harpin14789 said:
Would there be any chance that wake would come back in the future?
Click to expand...
Click to collapse
Possible but not likely as I don't own the device
Having boot loop.
Sent from my ALCATEL ONE TOUCH 5036A using XDA Free mobile app
Related
So I'm presenting my kernel today I didn't sleep because it was so fun to compile and compile all night so I make my own kernel and yesterday I made some questions and I need to thanks "_that" because he help me to compile the kernel.
Reloaded version done from Zero again will put the features missing later.
Now I will do extensive test of a version and will know exactly what changes from version to version.
I will start to add the featurer that were on my previous kernel later..
Features:
ISO 9660 Support
UDF Support
CIFS Support
Dynamic Fsync
No more crash when reading /sys/bus/nvhost/drivers/tegradc/tegradc.0/nvdps
Companion Core OC to it's full potential 620 MHz
Thalamus hot-plugging
Compiler With Linaro 4.7 using -O3 Optimizations
I/O Schedulers
noop
deadline
row - default
cfq
bfq
sio
CPU Governors:
lagfree
smartassH3
touchdemand
lulzactive
pegasusq
interactive - default
And the default ones.
Ramdisk:
DPI Unlocked
ADBD with Root (ro.secure=0 )
Coming next:
data2sd Support
CPU Overclock
GPU Overclock
Github:
https://github.com/maxrdlf95/tf700t_maxkernel
Source for V1
Comming
Source for V2
https://docs.google.com/file/d/0B0UY4U-rpxjsekI5TVp1SUNRNkU/edit?usp=sharing
Soon I will only include patch files to older versions as I will be using Github..
Changelog Reloaded:
V1
Made from zero
Dynamic Fsync
ROW Scheduler
Compiled with latest Linaro 2013.04
V2
Added Thalamus Hotplug
Added Voltage Control
Improved lowmemorykiller
Added Improved glibc, memcpy, memmove Functions
Optimized ARM RWSEM Algorithm
Added SmartAss H3 Governor
Added lagfree Governor More to come
Added Optimized CRC32 Algorithm
Added Optimized AES and SHA1 routines
V3
GPU Overclock 666 MHz
LP Core Overclock 620 MHz
V4
Add SIO scheduler
Add Touchdemand governor
Changes on TCP
Optimization of ondemand and interactive and CFQ
Optimization to code
BFQ & SIO are back
Improvements to I/O
Compiled now using O3 Flag
Fixed CIFS thanks to the guy that posted the patch here
Still working on GPU OC Issue and CPU OC
Some fixes
RC Release:
Updated to 10.6.1.14.8 Source code
Added CPU OC up to 1.9 GHz Please use Trickster or Franco.app latest version which works fine
Some updates to ext3 and ext4 filesystem
Lots of changes to come yet tomorrow will do more work
Credits:
Ezekeel, faux123, _that, Metallice, David McCullough & lupohirp
Thanks:
buhohitr So much for checking all test version of kernel I send and help me to fix this
wingdo For testing some kernel versions also
Changelog Old Version:
V1
First version
Lot of optimizations and patches that I don't remember now.
V2
init.d Support
Linaro 4.7 2013.03 Compiled
Updates to lowmemorykiller
Some changes in governors
V2.1
Fixed Clocks Speed
Fixed Companion Core Overclock
GPU Overclock 666 MHz
V3
Optimizations to EXT4 Filesystem
Added improved version of glibc, memcpy & memmove
Added optimized AES and SHA1
Added support to hardboot to a kexec kernel
Some fixed in code of Thalamus Hotplug
More things that I don't remember
V4
Removed some unnecesary code
Added Dynamic Fsync
Fixed Reboot issues
Some other things I don't remember, so busy now..
First!
maxrdlf95 said:
So I'm presenting my kernel today I didn't sleep because it was so fun to compile and compile all night so I make my own kernel
Click to expand...
Click to collapse
Cool, another kernel. :good: I think I can retire soon.
maxrdlf95 said:
Lot of optimizations and patches that I don't remember now.
Click to expand...
Click to collapse
Remember you have to offer the source code of your kernel because it's under GPL license.
_that said:
First!
Cool, another kernel. :good: I think I can retire soon.
Remember you have to offer the source code of your kernel because it's under GPL license.
Click to expand...
Click to collapse
Oh yes.. Will upload it tonight untill I learn how to use github
P.D Don't retire yet I'm still learning
Cool
That´s great news, thanks! Downloading now...
maxrdlf95 said:
Oh yes.. Will upload it tonight untill I learn how to use github
Click to expand...
Click to collapse
Ah, github ... it's great, but I will only start using it when I know how to use it correctly.
maxrdlf95 said:
P.D Don't retire yet I'm still learning
Click to expand...
Click to collapse
That was, of course, a joke - I will continue to maintain my stable stock kernel, presumably as long as I own the device, maybe even a bit longer. It's great that we now have multiple devs who bring variety.
great to see that someone else is finally seeing the potential of thalamus' hotplugging routines.
Which ones are you using (modified from franco or the original ones)?
Good to see another dev!
bryce09 said:
great to see that someone else is finally seeing the potential of thalamus' hotplugging routines.
Click to expand...
Click to collapse
Do you understand how hotplugging works together with the lp/g cluster switching? And well enough that you can explain it to me?
maxrdlf95 said:
Oh yes.. Will upload it tonight untill I learn how to use github
P.D Don't retire yet I'm still learning
Click to expand...
Click to collapse
With the fortune _That made from publishing his kernels and giving good advices to everyone in this community, he can sure retire from his regular work and help us more here..
bryce09 said:
great to see that someone else is finally seeing the potential of thalamus' hotplugging routines.
Which ones are you using (modified from franco or the original ones)?
Good to see another dev!
Click to expand...
Click to collapse
Im using original Thalamus THanks!:good:
So I got already init.d Support wil upload next version with that and kexec suport for mutiboot
Source code will also be with that version
Is it possible you're going to release a version for data2sd like Hund's kernel? That would be great. Thanks.
With quadrant your kernel is about 150point more than that V2 stock kernel and it's flying when I put on performance mode (as fast as Hund's OC kernel). I ran about 10 quadrant and the cpu temp is about 42C. Good job for your first time!!
Edit: I set the governor to lagfree and balance mode, pretty smooth and fast, very nice for daily driver, but once I set it on performance mode this thing is flying...kid you not!
buhohitr said:
Is it possible you're going to release a version for data2sd like Hund's kernel? That would be great. Thanks.
Click to expand...
Click to collapse
Yes I can do that
Next version will be Linaro 4.7 2013.03 Compiled so if should fly!
So far, this kernel (V1) is running really smooth with interactive and SIO. I tweaked interactive a bit to improve battery.
I noticed minimum freq never drops under 513 MHz and there is hotplug tuning vs just "max active cores" like in stock.
Questions:
Why minimum freq at 513?
Is there a way to tune hotplug to only use 2 cores?
When flashing V2 over V1, should I wipe cache and dalvik?
I'd love to know, and appreciate you guys helping me learn more about kernels and settings (I don't mean for the questions to be demanding or rude, I just wanted to ask in a straightforward manner, right to the point).
Greatly appreciate your work, flashing V2 now!!
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
uberbania said:
So far, this kernel (V1) is running really smooth with interactive and SIO. I tweaked interactive a bit to improve battery.
I noticed minimum freq never drops under 513 MHz and there is hotplug tuning vs just "max active cores" like in stock.
Questions:
Why minimum freq at 513?
Is there a way to tune hotplug to only use 2 cores?
When flashing V2 over V1, should I wipe cache and dalvik?
I'd love to know, and appreciate you guys helping me learn more about kernels and settings (I don't mean for the questions to be demanding or rude, I just wanted to ask in a straightforward manner, right to the point).
Greatly appreciate your work, flashing V2 now!!
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
1 I think I know why minimun its at 513 will check that later
How that of tuning to use 2 cores only
Hotplug turn on/off CPUs automatically based on frequency..
V2 over V1 no you will be ok just flashing on top of it
Always good to see another kernel for our infinity :good: Just wondering what everyone's experience with battery life has been compared to stock or that's kernel?
Great work! Are you on with me to include in CROMi-X? :cyclops:
sbdags said:
Great work! Are you on with me to include in CROMi-X? :cyclops:
Click to expand...
Click to collapse
Yes Im with you no problem to include let me fix the Clocks and you can use V3
Thanks! :highfive:
Max, I have a question, is it possible to make the powersaver/balance/performance mode stick after a reboot by just using the UI?
Edit: Also your kernel is only using the following frequencies: 1700, 1600, 1000, 620, 513 and deep sleep.
buhohitr said:
Max, I have a question, is it possible to make the powersaver/balance/performance mode stick after a reboot by just using the UI?
Edit: Also your kernel is only using the following frequencies: 1700, 1600, 1000, 620, 513 and deep sleep.
Click to expand...
Click to collapse
There was an error on frequency table I fixed it already and now min its 475 again
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on marshmallow roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
A new simple version (lollipop version) is available at post #2. Do check it out!
Note: R47 or later will work perfectly only on MarshMallow. Lollipop support was ended with R46.
Custom Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.3.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- MSM_hotplug driver flavored by neobuddy
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- Add State notifier driver
- Add Impulse governor(default)
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq Optimizations
- Backported hotplug thread infrastructure
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
OptimusR46NEW(Final LP version)
Mirror: (Current as well as older versions available)
Mediafire
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Flashhhh, Thecrazyskull
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Version Information
Status: Stable
Current Stable Version: R38
Stable Release Date: 2015-05-21
Created 2015-04-24
Last Updated 2015-07-14
OptimuSimple is the version that i have been using quite often now. It's not bloated with many features and works surprisingly well compared to original version. Some of it's features:
- Updated to v3.4.109
- Compiled with Linaro 4.9 Cortex A7 optimized toolchain
- Intelliplug 4.0 by faux
- Faux Sound Control
- Kcal Control by savoca
- Simple GPU Algorithm
Optimizations and governors are same as original version. It doesn't contain dt2w. So if u want dt2w flash original version from 1st post!
Download:
https://www.androidfilehost.com/?fid=24052804347833430
Looking for changelogs??
Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Good to see one more kernel
Sent From My XT1068{LP} Using TapatalK
Will try ASAP, thanks
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
hiu115 said:
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Click to expand...
Click to collapse
Camera is working fine!
You can test it for yourself
Kai Disobey said:
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
Click to expand...
Click to collapse
Glad to hear that!
srisurya95 said:
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
U r welcome
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Does it support XT1033 as well?
hiu115 said:
Does it support XT1033 as well?
Click to expand...
Click to collapse
Yes!
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
DeHuMaNiZeD said:
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
Click to expand...
Click to collapse
Thanks for reporting!
Will fix it
But the next update will take a little time!
Sry
Intellithermal plzzzz..
srisurya95 said:
Intellithermal plzzzz..
Click to expand...
Click to collapse
Intellithermal isn't entirely useful on the Moto G since it runs on low clock speeds anyway. So no heating problem.
srisurya95 said:
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry what version of blisspop you have?
today's build?
deltafile said:
sorry what version of blisspop you have?
today's build?
Click to expand...
Click to collapse
4/02
Sent from my falcon using XDA Premium 4 mobile app
srisurya95 said:
4/02
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ty im going to switch to it from candy rom
Thermonuclear Stuff:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Introduction:
I'm just starting out with these stuff, so please don't hate. This kernel is supposed to be for performance and battery balanced. Don't expect this kernel to have magic battery life or amazing performance.
Click to expand...
Click to collapse
Features:
SaberMod 6.0 GCC Compiler
GPU overclock 600mhz
GPU underclock 100MHz
CPU underclock 96MHz
Intelliplug 3.9
Zzmoove Gov
Impulse Gov
Intellimm Gov
Intelliactive Gov
Smartmax Gov
PegasusQ Gov
Badass Gov
Dynamic Fsync
Powersuspend
Faux Sound Control 3.2
Kexec-hardboot-patch
Fiops Iosched
Reclaim RAM for loggers
Kernel NEON mode
High Performance Audio
More will come soon
Click to expand...
Click to collapse
Changelog:
4/12/2015
*Initial Release
4/12/15
V2:
Intelliactive
IntelliDemand
SmartMax
4/13/15
V3:
PegasusQ Gov added
Badass Cpu Gov added
Sound Control 3.2 (Faux Sound)
Kexec-hardboot-patch(multirom compatible)
Reclaim RAM for loggers
added fiops io-scheduler
KCAL color control
12/19/15
V4:
Intelliplug 3.9
Linaro GCC 4.9.3
Latest CM12.1 sources
Started from scratch
All current features are available
removed intellidemand
added intellimm
Dynamic Fsync
Power suspend
Kernel NEON mode
High performance audio (192KHz)
optimizations
Check github for more
4/28/15
V5:
SaberMod 6.0
Linux Kernel version 3.4.107
4/29/15
V6:
zzmoove governor added
impulse governor added
5/7/2015
V7:
Underclock CPU to 96MHz
Underclock GPU to 100MHz
Click to expand...
Click to collapse
Downloads:
Download:
V1
V2
V3
V4
V5
V6
V7
Click to expand...
Click to collapse
Thanks:
@Flashhhh @Anas Karbila @attack11 @Niropa @cyanogenmod @YoshiShaPow, If you think I unfairly didn't mention you, PM me.
If you want to build your own kernel, go here: Link
This kernel is tested on CYANOGENMOD 12, 12.1, and BlissPop.
XDA:DevDB Information
[Kernel] [3.4.107] SmoothGKernel V7 [CM12/12.1] [AOSP] [SABERMOD 6.0], Kernel for the Moto G
Contributors
MetalPhoenix45
Source Code: https://github.com/MetalPhoenix45/SmoothGNew/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v7
Created 2015-04-12
Last Updated 2015-05-07
Reserved
Mine....
Q&A
Q: How do I flash this?
A: Install TWRP or any other custom recovery. Download my kernel. Then go to recovery mode. Install>SmoothG.zip>Install it!
Q: No Wifi or won't boot up,
A:Install latest Cyanogenmod 12.1 and if you still have problems, tell me.
What other Q&A's do you wan't? Tell me.
first, yeah!! thanks for bringing up another kernel. will give em a shot very soon.
NeoPreacher said:
first, yeah!! thanks for bringing up another kernel. will give em a shot very soon.
Click to expand...
Click to collapse
Thanks, and please tell me features you'd like me to add to this kernel.
@MetalPhoenix45 Good to see that u finally did it!
Flashhhh said:
@MetalPhoenix45 Good to see that u finally did it!
Click to expand...
Click to collapse
I couldn't have done it without help.
2nd release is out!
Added intelliactive intellidemand and smartmax
MetalPhoenix45 said:
2nd release is out!
Added intelliactive intellidemand and smartmax
Click to expand...
Click to collapse
Nice!,thanks for adding the Govs i tested it and Simple_ondemand GPU causes reboot when confirmed for use on Synapse
-Blisspop 3.0
-UniversalKernelManager 3.8
-Clean Install
- Team Bliss V4A Mod from their site
if you need any more info like logcats or whatnot just tell (pm or reply)
Thank you for this kernel :good: very smooth and stable, good work, congratulations!.
(if you want, you could UC it to 192mhz)
Gpu overclock to 600mhz? I thought 533 was max
eddydc1 said:
Gpu overclock to 600mhz? I thought 533 was max
Click to expand...
Click to collapse
don't think there's a limit, just some gpu's will lose stability at a point. as with all overclocking, your mileage may vary.
neopolitann said:
Nice!,thanks for adding the Govs i tested it and Simple_ondemand GPU causes reboot when confirmed for use on Synapse
-Blisspop 3.0
-UniversalKernelManager 3.8
-Clean Install
- Team Bliss V4A Mod from their site
if you need any more info like logcats or whatnot just tell (pm or reply)
Click to expand...
Click to collapse
Will fix soon, I see the problem.
sfoot13 said:
Thank you for this kernel :good: very smooth and stable, good work, congratulations!.
(if you want, you could UC it to 192mhz)
Click to expand...
Click to collapse
I'll underclock to 100mhz in the next release.
twist3d0n3 said:
don't think there's a limit, just some gpu's will lose stability at a point. as with all overclocking, your mileage may vary.
Click to expand...
Click to collapse
The moto g's GPU didn't lose stability suprisingly, running very smoothly with very few stutters(less than stock). Also, can anyone give me info for battery life, for me its enough, but I want to hear from everyone else.
Going to use sabermod 5.0 after the next build. Thanks @Flashhhh for helping.
MetalPhoenix45 said:
I'll underclock to 100mhz in the next release.
Click to expand...
Click to collapse
Thank you so much! just 1 request more... could be possible add kexec support? :fingers-crossed:
sfoot13 said:
Thank you so much! just 1 request more... could be possible add kexec support? :fingers-crossed:
Click to expand...
Click to collapse
Of course. I'll add it.
My work: SmoothGKernel for the Moto G, and remember always hit the thanks button if anyone helped.
Sorry guys, I wish I could upload sooner, but I'm getting errors and looking for a fix.
Crazy game experience using SmoothGKernel V2, been playing UFC from EA Sports and it's just amazing. My eyes couldn't even keep up because it was so responsive. No disrespect, but I thought there was at least gonna be a lag while tapping the screen, but there was none. SmoothGKernel has a lot of potential for sure.
@MetalPhoenix45 keep up the grea workt!
kijp15 said:
Crazy game experience using SmoothGKernel V2, been playing UFC from EA Sports and it's just amazing. My eyes couldn't even keep up because it was so responsive. No disrespect, but I thought there was at least gonna be a lag while tapping the screen, but there was none. SmoothGKernel has a lot of potential for sure.
@MetalPhoenix45 keep up the grea workt!
Click to expand...
Click to collapse
Thanks, how was battery life?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
What Is Sensei?
Sensei is a kernel for the Mi4i (ferrari) that is derived from @dh-harald sources. Built with UberTC to ensure the best performance and stability with a highly optimized system. Cherry-picked features & fixes from AOSP, CM and other repos to provide useful and well-tested features that make your phone better. It does not have useless kernel patches or make dangerous or experimental changes to your phone that cause weird or inexplicable problems.
Features
Multirom support
Advanced color control
Fastcharge
Better Ram & Battery Management
Quickwake
Fast bootup (Using all cores)
Better thermal handling
Compability
Sensei is compatible with any rom derived from the CyanogenMod source. (CM12.1, CM13, AOSPA-L, Pac-Rom, PA)
DONATIONS
Sensei is built on open-source software which doesn't allow me to charge it for anything. If you like the kernel and want to donate, here's my paypal email "[email protected]"
Where to download?
Downloads are in the changelog on the 3rd post
How to install?
Make sure you are using MiToolkit v4 to flash the recovery.
Download the kernel
Move it to your phone if downloaded from PC
Reboot into recovery
Locate the kernel and install. You don't have to wipe cache/dalvik.
XDA:DevDB Information
Sensei - Enjoy the ZenExperience, Kernel for the Xiaomi Mi 4i
Contributors
haikalizz
Source Code: https://github.com/webhaikal/android_kernel_xiaomi_ferrari
Kernel Special Features: Doubletap2Wake | Lot's Of Governors | Core_ctl | Fast Charge
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2016-10-27
Created 2015-08-20
Last Updated 2017-02-03
Information
Preferred Settings
Balanced
Governor (Both) : Interactive
I/O Scheduler : Zen
Read-ahead : 1024kb
CPU Hotplug : Thunderplug
Thermal : Core Control (Max Temp 50°)
Gaming
Governor 1 : ElementalX
Governor 2 : Interactive
I/O Scheduler : Zen
Read-ahead : 1024kb
CPU Hotplug : Thunderplug
Thermal : Core Control (Max Temp 50°)
Performance
Governor (Both) : SmartassV2
I/O Scheduler : Zen
Read-ahead : 1024kb
CPU Hotplug : Thunderplug
Thermal : Core Control (Max Temp 55°)
Fix for MIUI
To make it work for MIUI6 and 7.
Flash these files in TWRP
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view?usp=sharing
https://drive.google.com/file/d/0B_NyTBF8E1FZcGlLaW8xbEpYNlk/view?usp=sharing
Preferred Kernel Manager
Kernel Auditor
SetCPU
Enabling features
Doubletap2wake (To enable, run this in terminal : "echo 1 > /sys/devices/soc.0/78b9000.i2c/i2c-5/5-004a/wakeup_mode")
CPU Core Control
Force enable CPU : "echo 1 > /sys/devices/system/cpu/cpu{number}/online_control"
Force disable CPU : "echo 1 > /sys/devices/system/cpu/cpu{number}/online_control"
Notification LED control : https://gitlab.com/webhaikal/SenseiFerrari/commit/b1d580859870bcaaedadfb043cde37a0e0ea0918
Bugs
Others? You tell..
Changelog
Sensei v3.0 (27/10/2016)
Changelog
[*]Upstreamed to Linux 3.10.104
[*]Added new governor (Chill, Intelliactive, Ironactive)
[*]Added ondemand optimize feature (Zen-tune)
[*]CVE-2016-5195 Security patch
[*]Dynamic FSync
[*]Kexec & Kexec Hardboot patch
Download : https://www.androidfilehost.com/?fid=457095661767104457
MD5 : 841b61a6967873610c9ccd868644c053
Sensei v2.3r2 (26/06/2016)
Fixed Yankactive not showing in previous version
Added MSM Limiter
Thunderplug updated to v5.0
Download : https://www.androidfilehost.com/?fid=24572369242687284
MD5 : 8e35f50fcf1548f95baff8cb04978c62
Sensei v2.3 (26/06/2016)
ElementalX Governor
Yankactive Governor
Using faster optimization techniques (Thanks to OP3 forums)
Download : https://www.androidfilehost.com/?fid=24572369242687266
MD5 : eb401b13c9622778492c0d9e53ac9e20
Sensei v2.2-dev (13/02/2016)
Upstreamed kernel version to 3.10.55 (Will update to latter versions later)
Download : https://www.androidfilehost.com/?fid=24415232478675650
MD5 : 23dcc71508db72faa8a8e91afeadc6c9
Sensei v2.1.2-dev (24/01/2016)
Download : https://www.androidfilehost.com/?fid=24389512218018294
MD5 : dde95bd145ab59ec3c71ade66dfa0009
Does this work with miui? Or only cm ROMs?
Sent from my Mi 4i using Tapatalk
Working well on cm12.1. Fixed my WiFi issues with custom kernels as well. I don't see zzmoove amongst the govs, was it removed?
davtse said:
Working well on cm12.1. Fixed my WiFi issues with custom kernels as well. I don't see zzmoove amongst the govs, was it removed?
Click to expand...
Click to collapse
Thanks for the info, will look into it today. @Annasarp this only works on CM12.1, will try to look into support for miui.
-----------Edit-----------------
Testing out latest build for potential zzmoove governor fix with new hotplugs (Alucard, Mako, Bricked).
haikalizz said:
Thanks for the info, will look into it today. @Annasarp this only works on CM12.1, will try to look into support for miui.
-----------Edit-----------------
Testing out latest build for potential zzmoove governor fix with new hotplugs (Alucard, Mako, Bricked).
Click to expand...
Click to collapse
I am on ver. 1.0 , not getting option to set hotplug .I tried kernel aiudtor ,trickster mod and set CPU.
v1.02 still cant see zzmoove, and kernel version in about phone says unknown
davtse said:
v1.02 still cant see zzmoove, and kernel version in about phone says unknown
Click to expand...
Click to collapse
same here but on first boot zzmoove shows, the next boot it disappears.. may need to disable it. On other news, new hotplugs Alucard, Mako and Bricked have been implemented. Will include in next update with some thermal and cpu freq tweaks...
haikalizz said:
same here but on first boot zzmoove shows, the next boot it disappears.. may need to disable it. On other news, new hotplugs Alucard, Mako and Bricked have been implemented. Will include in next update with some thermal and cpu freq tweaks...
Click to expand...
Click to collapse
Great! I come from the i9505 so I'm familiar with Alucard. Anyway just a question. My Big cores seem to come online more often then the little cores do, even when just doing UI stuff. Is this how the 615 behaves normally? I'm using alucard for both sets of CPUs and autosmp.
davtse said:
Great! I come from the i9505 so I'm familiar with Alucard. Anyway just a question. My Big cores seem to come online more often then the little cores do, even when just doing UI stuff. Is this how the 615 behaves normally? I'm using alucard for both sets of CPUs and autosmp.
Click to expand...
Click to collapse
I think it's how the governor handles it... The big cores aren't always online using the settings provided, most of the time the little cores handles most of the UI, Games and stuff. I will try using alucard and see.
haikalizz said:
I think it's how the governor handles it... The big cores aren't always online using the settings provided, most of the time the little cores handles most of the UI, Games and stuff. I will try using alucard and see.
Click to expand...
Click to collapse
seems like autosmp hotplug is the issue. I turn it off, all cores stay online, the big cores stay at 200mhz while the small ones are used more actively unless load is heavier then all are turned on. under no load they're all at 200mhz but none of them go off
New build up, changelog and download links are in #3 post. Also @davtse have been using Alucard governor with AutoSMP, Big cores are usually online. May need to find more info about that, though this is a WIP...
haikalizz said:
New build up, changelog and download links are in #3 post. Also @davtse have been using Alucard governor with AutoSMP, Big cores are usually online. May need to find more info about that, though this is a WIP...
Click to expand...
Click to collapse
After testing over the course of last night, i've found that most of the hotplugs have the same issue, but Mako just doesn't work at all. I think the problem is that none of the hotplugs are meant for octacore big.small cpus. If you look in alucard's folder in /sys/kernel/alucard, it only has variables up to core 3, 4-7 are missing
Testing new kernel with doubletap2wake and sweep2wake implemented in kernel... About the hotplugs, I may need more time on that.
------- Edit --------
Doubletap2wake and Sweep2Wake/Sweep2Sleep implemented in kernel but not working fully... Either it needs to be implemented in touchscreen drivers or rom... @k2wl
haikalizz said:
Testing new kernel with doubletap2wake and sweep2wake implemented in kernel... About the hotplugs, I may need more time on that.
------- Edit --------
Doubletap2wake and Sweep2Wake/Sweep2Sleep implemented in kernel but not working fully... Either it needs to be implemented in touchscreen drivers or rom... @k2wl
Click to expand...
Click to collapse
Would it help if we could find some hotplug driver for another 615 snapdragon device?
davtse said:
Would it help if we could find some hotplug driver for another 615 snapdragon device?
Click to expand...
Click to collapse
I tried Thunderplug from Yu Yureka, designed for Octa-core devices... Won't boot... Bootanim won't show, after MI logo is blank. Right now browsing through Yureka's forum to find other hotplugs..
Thanks for ur hardwork mate !
Can anyone tell me why when i set a recommended settings then always my big cores change the yanactive governor to interactive, just little cores stayin with yanactive, and please help me in setting up this kernel for the best gaming performance, greetings!
Wysłane z mojego Mi 4i przy użyciu Tapatalka
TeusFrom said:
Thanks for ur hardwork mate !
Can anyone tell me why when i set a recommended settings then always my big cores change the yanactive governor to interactive, just little cores stayin with yanactive, and please help me in setting up this kernel for the best gaming performance, greetings!
Wysłane z mojego Mi 4i przy użyciu Tapatalka
Click to expand...
Click to collapse
which kernel adjustor are you using? adiutor works fine here
TeusFrom said:
Thanks for ur hardwork mate !
Can anyone tell me why when i set a recommended settings then always my big cores change the yanactive governor to interactive, just little cores stayin with yanactive, and please help me in setting up this kernel for the best gaming performance, greetings!
Wysłane z mojego Mi 4i przy użyciu Tapatalka
Click to expand...
Click to collapse
Could the settings, is your system set in performance or battery saving mod? Because that could overwrite the settings... Other factors could be like what @davtse said...
Also I'm still uploading a new version with updated files like thermal and cpu freq... Updated governors and dt2w/s2w are also included. For those who needs the source, sorry though, can't push to github with mobile data...
B14CKB1RD
Kernel for the OnePlus 3 & 3T
B14CKB1RD Kernel is made with stability and suitability for what uses you want from your phone. I like a happy medium of minimal and just the right amount of features added in as to not be overbloated. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm. ABSOLUTELY NO TROLLING, BASHING, OR ARGUING on the post please. Actions will be taken and you will lose my personal support.
Feel Free to Join us on our public Telegram Chat B14CKB1RD Kernel ONePlus 3 & 3T Users
https://t.me/B14CKB1RDOP3
Download For OOS OB12/21 Based:
For Latest OOS build:
Download Here
Click to expand...
Click to collapse
Download For LOS / Custom Based:
For Latest Custom Base build:
Download Here
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik/ART Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Alucard
Blu_Active
Chill
Conservative
Darkness
Electron
Interactive
Ondemand
Performance
ZZMoove
I/O Schedulers:
Bfq
Cfq
Deadline
Fiops
Maple
Noop
Sio
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Sociopath
Vegas
Veno
Westwood
Yeah
Other:
Built using B14CKB1RD AnyKernel made by Snuzzo
Updated to latest OOS 4.1.7 Base or LOS Base commits
Linux Kernel 3.18.67
Built with gcc UBER 7.1.x toolchain
Adreno Idler
CPU OverClock
GPU OverClock
Input Boost
LZ4 Compressor/Decompressor
F2FS Support
Flar2 Wake & Sleep Gestures
Flar2 Sound Control
Battery Optimizations
Enhanced Power Efficiency
Fast Charge
Wakelock Controls
Adaptive Low Memory Killer
Power Suspend Mode
State Notifier Mode
Kernel Mode Neon
BOEFFLA LED
BOEFFLA TouchKey Control
I/O Sched Switcher
And many more..
Notes::
For maximum stability. Before I flash each update of my kernel, I go to settings>apps>ElementalX-Kernel Manager>storage and wipe the cache and data for it for a fresh new setup. I do this because when and if i do add or remove a feature you set on boot and its not there. it may cause conflict.
If you come across a bug or issue please do not spam the thread. either pm me or reach me on hangouts or g+ by [email protected]
Source:
click here for OOS base kernel source
click here for LOS / Custom base kernel source
Frequently Asked Questions:
Q: Whats your current setup using Elemental X Kernel Manager?
A: My configuration for best performance and battery life:
Governor Little Cluster: Interactive
Governor Big Cluster: ZZMoove
Cpu Boost: (Input Boost Freq) 460 MHz for both and milliseconds to 20
TCP: Sociopath
IO Scheduler: Noop
wakelocks all blocked
Besides enabling a few other small things like boefflas touchkey and flar2's wake gestures everything else i leave AS IS.
Click to expand...
Click to collapse
Credits & Thanks
@Snuzzo (For teaching me all he knows about kernel and his code used on many devices)
@hellsgod (For his support, code, and friendship)
@frap129 (For his specially made 6.3.1 toolchain)
@apophis9283 (For his friendship, help and contributions to android)
@xanaxdroid (For his toolchains)
@buckmarble (For his code and contributions)
@Xileforce (For his code and contributions)
@franciscofranco (For his code, contributions and audio tweaks)
@faux123 (For many of his awesome kernel contributions and code)
@flar2 (For Gesture Wake Controls and Sound Control)
@savoca (For his work and code such as kcal control)
@DespairFactor (For his code and contributions)
@DragonHunt3r (For his code and contributions)
@alucard_24 (For his code and contributions)
@bbedward (For his code and contributions)
@Yoinx (For his awesome work on kernel adiutor and general help)
@RenderBroken (For his code, contributions and his friendship) @Lord Boeffla (For his code and contributions)
@eng.stk (for his code and contributions)
AOSP for having all this a possibility with open source
All Other Developers who make android a great hobby to enjoy
All of my testers and users thank you for keeping me going.
To any other devs i missed...all your work is very much appreciated. if you feel i should put you on the list let me know via pm and ill gladly do so
Reserved for later
Best available kernel for OnePlus 3/3T. We are testing it for months to ensure the ultimate experience for the end user. Enjoy, and thanks for the opportunity! :highfive:
Thanks for kernel
This kernel is dope AF Rev. Great job, brother
Best one out there, couldn't recommend a better one.
The wait is over. The best of the best. Dope stuff right here
bought 1+3T for this kernel
BB FTW \m/
Was waiting for this to release...
Too early to have an opinion ?
2 things I noticed , 1 sometimes execution of an action (opening an app) takes 3 seconds , 2 entropy seems higher than any other kernel...
That said the kernel.makes the OS feels fluid and smooth (OOS)
Edit/ fixed the 1st point (the slow action) by disabling the wq_power_saving, entropy still high i think at 68%
theduke7 said:
Was waiting for this to release...
Too early to have an opinion [emoji846]
2 things I noticed , 1 sometimes execution of an action (opening an app) takes 3 seconds , 2 entropy seems higher than any other kernel...
That said the kernel.makes the OS feels fluid and smooth (OOS)
Edit/ fixed the 1st point (the slow action) by disabling the wq_power_saving, entropy still high i think at 68%
Click to expand...
Click to collapse
I'll play around a bit...there's always a future release
Sent from my ONEPLUS A3000 using Tapatalk
Awesome. Great job rev. Glad that it BB made has a public release
Gonna test now will post back soon!
After install gone wifi. ?????
patoga100 said:
After install gone wifi. ?????
Click to expand...
Click to collapse
What rom or OOS version..because this is 4.1.6 or ob11/20 only as stated in OP...wifi has worked for all my OOS testers
Sent from my ONEPLUS A3000 using Tapatalk
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
patoga100 said:
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
Click to expand...
Click to collapse
Yes
patoga100 said:
I'm on beta11, but my kernel was elementalx. This is the issue? Go back to Stock, and then flash Yours? Thx
Click to expand...
Click to collapse
Yes first go back to stock and then flash blackbird kernel.
Some kernels have uninstaller. Check it XDA thread for that.
Do we have aroma installation?
P.S - Welcome to OP3/3T community. Thank you very much for this kernel.
lol.4.ever said:
Do we have aroma installation?
P.S - Welcome to OP3/3T community. Thank you very much for this kernel.
Click to expand...
Click to collapse
No.
darjwx said:
No.
Click to expand...
Click to collapse
OK.
So is this flash and forget type as right now I don't want any type of root in my phone ?
Thanks.