Related
My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...
Darius, I'm stuck with a brick galaxy player. I can try to flash with a galaxy 3 firmware if you want
Do you know how to make a dump of your device so you can share with me the original firmware?
http://forum.xda-developers.com/showthread.php?p=14493414
I don't know...but I'll try to find
Thanks!
I tried the firmware of galaxy 3, but didn't work
I dont think that its possible, first of all, despite being an android device, it doesnt have radio features, gsm 3g etc, only wifi, there are features that our phone does not support
Anyone found a solution for this yet? Not being able to test this device to it's full potential is really frustrating. Games are laggy and apps just do not run smooth on this one.
Has anyone tried z4root on this? I did and it freezes at "acquiring root shell".
@fedeff: how did you brick it?
Darius_AWS said:
My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...
Click to expand...
Click to collapse
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.
arunmcops said:
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.
Click to expand...
Click to collapse
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?
anon3524 said:
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?
Click to expand...
Click to collapse
factoryfs.rfs is ur firmware backup....
@arunmcops: Thanks for the instructions. If someone try this and upload it'd be great for me.
@anon3524: I accidentally reseted the device to factory, trying to fix a problem with wifi (it suddenly stopped working one day).
arunmcops said:
factoryfs.rfs is ur firmware backup....
Click to expand...
Click to collapse
Ok, I am down to do this process you just explained as long as you or anyone explains to me how to recover the device with this "factoryfs.rfs" in case it gets bricked. You'd have to explain with detail how to grab this file and what to do with it etc. Also, if you could give further details on the initial process, that'd be great since a few things are unclear (to a brave noob like me).
Other than that, I am willing to try it to see the results.
BRING IT OON! *warface*
@arunmcops - I've got one of these, so have uploaded the file you wanted here - sorry, not allowed to post links yet:
dl.dropbox.com/u/6491656/Samsung/factoryfs.tar.gz (please don't flash this, its not a full rom)
I haven't made any changes to the base firmware other than renaming a couple of the phone.apk's to .old (cell standby was eating battery, and this device doesn't have a sim).
For fun, i've also uploaded a dmesg log
dl.dropbox.com/u/6491656/Samsung/dmesg.log
One other thing, i think the partition layout might be slightly different on this (might be wrong, don't have the phone) in that the internal sd card is mounted as /sdcard and the external one is /sdcard/sd.
Hope this helps!
Chris
@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?
fedeff said:
@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?
Click to expand...
Click to collapse
Hi...thats probably because it isn't intended as a flashable rom. Its just a dump of the stock firmware so that arunmcops asked to see to see if it had any resemblance of the galaxy 3 f/w, to see what we'd have to do to get a working custom ROM on this device..
Please don't attack it with any kind of Norse God ...especially until there is a confirmed route back to stock. All thats contained in the files is what you have on your device already - so there is also absolutely no point (for now).
If your having trouble with your device now, you could try doing a factory reset or playing about in Kies - i've fixed my device once after I got curious and flashed a custom ROM on here (which fyi completely messed it up - something like E:multi_csc: error: open /efs/imei/mps_code.dat because we dont have an IMEI code on this device) and then got it back working again - unfortunately i can't remember exactly what I did. Otherwise if this doesn't work I'll see if i can make a working stock package for Odin.
@ctaylr, yes I'm having problems with my device. It got soft bricked. I couldn't make it work using Kies. The only thing I can do is to start it in Download mode. If you can make a working package for oding that'd be great
This might help
http://forum.xda-developers.com/showpost.php?p=9515709&postcount=14
Thanks!
@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks
ctaylr said:
@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks
Click to expand...
Click to collapse
1) I have the 8gb version
2) By doing "wipe data/factory reset" is how I got it soft bricked. (the device wifi suddenly stopped working, and I thought that would help) After that it kept entering in the recovery mode. Then I tried to flash it with odin, now the only thing I can do is enter the download mode
Thanks again for helping me!
News?
Hi! I also like the others I am interested because my Galaxy player has 50 brick and I need someone to do dump the firmware so I can flash through odin! Please would you be my salvation and many other who have this player and would like to fix without waiting for the assistance of a month
Waiting for an answer I greet and thank all users who want to help me
sorry if English is not correct, but I'm using google translator (I'm Italian)
EDIT:
listen to me: http://forum.xda-developers.com/showthread.php?t=726673 This is the guide on how to get the dump of your fimrware if someone kindly did this process with its galaxy player 50 and then upload the file . tar obtained would help all
I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.
ctaylr said:
I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.
Click to expand...
Click to collapse
ok then I'm sorry I read the topic in a hurry and did not realize that you can not do what I say but re-reading now I understand!
ctaylr what do you advise me to do then? wanted to try an get into recovery and restore but I think the 3 keys are disabled enters only download ..
Google traductor sorry
This should work on all Qualcomm Snapdragon based Samsung galaxy SIII's, if it doesn't, PM me the model and I'll try and find a solution.
WHILE THIS IS VERY LIKELY TO WORK FOR ANY BOOTLOADER/MODEM/FIRMWARE BRICKED PHONE, THERE IS NO UNCONDITIONAL GUARANTEE THAT THIS WILL WORK FOR YOUR PARTICULAR SITUATION, THERE IS A POSSIBILITY THAT THERE ARE SOME BRICK STATES THAT THIS WILL NOT WORK FOR, but in my experience, almost all cases can be resolved by rewriting the sdcard with correct partitioning.
Disclaimer out of the way, let us begin.
Needed Materials and Files:
EDIT: if you have another phone or know someone else with the same phone have them run this and the output will be a debrick image you can use: busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=200 if it does not work then change the last number (count=) to something larger and try it. If you create an image please upload it so I can put it into a repository I'm creating
16GB or 32GB class10 microSD card
A hard bricked Samsung galaxy S3 US Cellular
The debrick image for your device:
[[Here is the drive image for a folder containing all the debrick images that I currently have uploaded, more will be coming: https://drive.google.com/folderview?id=0B612qYHFMILfWUlMTTEwdUstcXM&usp=sharing ]]
If you have any images that I missed, please send me a link or, better yet, upload them to drive, make them publicly shared, and share them with me at [email protected], I will put them in this folder for all to use
US Cellular R530: ftp://sdbruington.us/d2usc/SCH-R530_ALIVE_MJA_200MB_16GB.bin
Sprint L710: http://www.mediafire.com/download/23...ph_l710.img.xz
AT&T I747: http://d-h.st/iEy
T-mobile T999: http://www.mediafire.com/download/gr...k_SGH-T999.img
---I did not upload these images, I have simply collected the links over time, please thank Cnexus for his help in finding these and
---helping me to originally unbrick my S3
Your computer
A card reader that will accept the card (another phone will not work as this is an image, and it needs to repartition the SD card)
Either a partition editor (I've heard that you can use dd or something on linux, but I haven't tried) or this: View attachment win32diskimager-v0.9-binary.zip
A wall charger (computer charging isn't as reliable)
Procedure:
1. Take the sdcard and insert it into your computer
2. Download the mentioned image and the software to put it onto the sdcard
3. Use your computer to pull the data already on the card onto your computer hard drive, as the sdcard will be wiped when the image is put onto it
4. use the software that you downloaded earlier to burn the image to the sdcard
5. Remove the battery from the SGS3
6. insert the sdcard into the S3
7. Put the battery into the S3
8. The S3 may boot automatically, or you may have to manually boot it by holding down the power button for 5< seconds
9. If the update that bricked your phone also messed up /system, then you'll have to coerce Odin mode to shove a stock firmware image to your phone, though I've had more than just SOME trouble with that in the past (in other words I haven't been able to get back to stock yet...), if you simply had a radio update or something go wrong, then proceed to the next step.
10. Do a victory dance with your phone in your pocket not the repair bench, or on second thought, make sure you don't drop it, don't create another problem.
11. After that, you can just use your device normally with the sdcard in it without worry of bricking it, though it will not be able to boot if you remove the sdcard;
the only known method of getting it to boot without the sdcard is reflashing stock firmware, which completely wipes the phone and resets everything back to complete stock. Also, Odin mode has, at least for me, objected when I've tried to flash the stock image back onto it, and even if Odin mode was sure of working, backing up ~16GB of data isn't a fast process, especially with the most reliable means being ADB. If you try to flash a stock image and it fails, your device will almost definitely come up with a version of dmode when you try to turn it on with the sdcard (still bricked otherwise) that says something about Kies update failure, the only way of correcting this that I've had success with is flashing an image that won't do much, such as the same recovery that you already had, over odin mode from that special dmode, as while that won't correct the actual brick, it will at least make you able to boot from the sdcard again. I will provide links to the stock images in a little while, once someone gets that far, as I will have to find all but the one from the US Cellular version.
I am currently looking for firmware images that will only flash the bootloader/modem, if anyone knows of an odin file that could do that, please let me know as soon as possible, in the meantime, I will try and create an update.zip that will flash the necessary files; as most bricks are likely cause by an update.zip that was meant for a different device, I am very confident that it can be fixed with another .zip file.---Stay tuned!
---Don't forget, that thanks button won't bite your finger off if you push it:fingers-crossed:
If any of the links are not fully functional, PM me to let me know, and if you have the link to another debrick image for another device, send me the link so I can include it here!
Please note: While there is a similar procedure for Xynos based S3's, they apparently require a physical modification that requires an amount of soldering, so it is most likely best for them to simply take them in for Jtagging and then just not brick them after that.
EDIT: here is the link to a full youtube tutorial that I made, just for those of you who like watching a video instead of getting lost in a written guide https://www.youtube.com/watch?v=-RTAbLBVfMI
EDIT AGAIN: I'm sorry about both of the mediafire links being down, I will try and find some more and upload them to my google drive, along with the others just to make sure they exist somewhere safe.I'm downloading the images now and uploading some that I already have, they will be available in this folder (https://drive.google.com/folderview?id=0B612qYHFMILfWUlMTTEwdUstcXM&usp=sharing) on google drive and will be available by email upon request
here is a sprint image that should work, sorry I haven't tested it http://www.mediafire.com/download/231uhy6l80jx74n/debrick_sph_l710.img.xz
for the t999 4.1: https://www.copy.com/s/xSAswQZbhQX8/t999_debrick.zip for the t999 4.3: https://www.copy.com/s/7ICfKXMC3ccr/T999_4.3_debrick.zip
I know this is becoming a mess of links but here is a link to an xda post that has t999 variant images http://forum.xda-developers.com/showthread.php?t=2439367
here is a sprint 4.4 debrick image: http://www.androidfilehost.com/?fid=23329332407591176
If you want to get your phone to operate without an sd card in there for every boot, stay tuned, I'll have a guide to return to stock soon, though a quick google search shouldn't be that hard if you're desperate
I will clean up this guide in a little bit but currently I have school and such to attend to so it may not be immediate
I know this is getting unwieldy but (big thanks to youdoofus) I have a way to completely debrick and fix it so it doesn't require even the sd to boot.
"Restoring stock bootloader
1) You were able to boot into the ROM
2) Plug your phone into a computer and use MTP mode
3) Move the debrick file onto your internal sdcard (/sdcard/debrick.bin)
4) Disconnect your phone
5) Open up a Terminal Emulator on your phone and input this code
Code:
su
dd if=/sdcard/debrick.bin of=/dev/block/mmcblk0
6) Reboot"
Of course this should be modified for the different versions and types of debrick image as some are img, some are bin, I think there might even be an ISO hanging around somewhere
EDIT: As of October 10th I'm working on a tool that will get an image directly from a stock rom/tar and put it on the SDcard. This is pretty complex so it will probably take a little while, but it should make it easier to get images if all that's required is a stock tar.
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
derget1212 said:
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
Click to expand...
Click to collapse
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
polobunny said:
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
Click to expand...
Click to collapse
how do i find out the correct bootloader? i was using this rom http://forum.xda-developers.com/showthread.php?t=2518998 for a couple months and randomly got hard bricked yesterday. any help is greatly appreciated.
Thanks for sharing this
derget1212 said:
how do i find out the correct bootloader? i was using this rom http://forum.xda-developers.com/showthread.php?t=2518998 for a couple months and randomly got hard bricked yesterday. any help is greatly appreciated.
Click to expand...
Click to collapse
Explain your situation. Randomly bricked is very vague. Did you flash anything? Do you remember doing anything? It's important. Phones don't go and "randomly brick" unless of a HW problem, and to either confirm or eliminate that possibility we need more details.
polobunny said:
Explain your situation. Randomly bricked is very vague. Did you flash anything? Do you remember doing anything? It's important. Phones don't go and "randomly brick" unless of a HW problem, and to either confirm or eliminate that possibility we need more details.
Click to expand...
Click to collapse
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
derget1212 said:
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
Click to expand...
Click to collapse
Whoa whoa there, if your phone still boots in either recovery or download mode, then you don't need to use a debrick.img.
If you have a custom recovery, you can flash your custom rom. If you don't, you can flash a stock ROM using ODIN in download mode.
polobunny said:
Whoa whoa there, if your phone still boots in either recovery or download mode, then you don't need to use a debrick.img.
If you have a custom recovery, you can flash your custom rom. If you don't, you can flash a stock ROM using ODIN in download mode.
Click to expand...
Click to collapse
It is hard bricked. Without the sd with a debrick.img installed, I get no response at all. And I've tried all the i747 debrick.img files I could find here with no success.
I can get to boot recovery mode with one .img I could find but boot recovery os different than recovery mode. It's essentially useless and Odin doesn't like it.
derget1212 said:
Like i said, it was totally random. My phone froze and rebooted yesterday. It got to the Samsung logo so i thought everything was okay. I fell asleep and woke up to a bricked phone. After all of my attempts, I got one debrick.img to show something on my screen and it shows "BOOT RECOVERY MODE". Odin sees my phone and tries to fix the PIT and the Bootloader but it always fails. From what i gather, it seems to be a hardware issue.
Click to expand...
Click to collapse
It really sounds a lot like the BRICKBUG to me, anyone know how to tell if a chip is insane without it working? And did you have the 4.3 bootloader? If you got that you should have been safe, but if you didn't then the kernel may have burned out the chips from the "bug" (it really doesn't seem too much like a "bug", more like an issue worthy of recall)
Sorry I don't know exactly what's wrong off the top of my head
derget1212 said:
It is hard bricked. Without the sd with a debrick.img installed, I get no response at all. And I've tried all the i747 debrick.img files I could find here with no success.
I can get to boot recovery mode with one .img I could find but boot recovery os different than recovery mode. It's essentially useless and Odin doesn't like it.
Click to expand...
Click to collapse
If you get ANY response at all, then the debrick image is doing its job; what you need is a stock image, I'll try to find a link for you to use. Try using Kies or something, alternatively, as if you have the serial number you can apparently flash it quite cleanly, all data on the phone will be lost though, as it effectively wipes the eMMC.
polobunny said:
You don't need a debrick.img of a 4.4 to get it working, you need a debrick.img of the correct bootloader. If you bricked your phone by flashing an older bootloader after upgrading to the 4.3 bootloader, then you need a debrick.img with the 4.3 bootloader.
Click to expand...
Click to collapse
Exactly
This image gets you in the clear if the ONLY thing screwed up is the boot partition, meaning modem/firmware/bootloader, it does NOT get you fixed if you got your rom F***ed up, and do not expect it to, this will get you into dmode so you can use odin or something like fastboot to flash a /system image or a FULL stock rom if you want to get your bootloader fixed without the SD card being in all the time.
dreamwave said:
If you get ANY response at all, then the debrick image is doing its job; what you need is a stock image, I'll try to find a link for you to use. Try using Kies or something, alternatively, as if you have the serial number you can apparently flash it quite cleanly, all data on the phone will be lost though, as it effectively wipes the eMMC.
Click to expand...
Click to collapse
if anyone can find the correct debrick.img i need to use, i would greatly appreciate it. I have tried Kies and Odin without success. They can see the phone but seem not to be able to access it. I can't flash anything via odin or get to the CWM recovery or download mode. this is a really weird screen i haven't seen before.
derget1212 said:
if anyone can find the correct debrick.img i need to use, i would greatly appreciate it. I have tried Kies and Odin without success. They can see the phone but seem not to be able to access it. I can't flash anything via odin or get to the CWM recovery or download mode. this is a really weird screen i haven't seen before.
Click to expand...
Click to collapse
Is there any way at all to get into dmode? What is windows recognizing it as?
Thanks for sharing.
EvangelineX said:
Thanks for sharing.
Click to expand...
Click to collapse
no problem, I hope it helped!
derget1212 said:
I've followed all these guides and haven't had any luck. I did use a CM 4.4 rom and some people are saying i need a debrick.img of a 4.4 to get it working again. i'm on an i-747. can you help?
Click to expand...
Click to collapse
If you bricked the /system partition AND the boot partition you will need a stock rom as well, just use Odin or something if possible after using a 4.3 image, a 4.4 image is more or less the same as a 4.3 as far as I know, I mean I bricked mine after using cm11 by flashing the wrong rom, it's just that the rom you tried tried to flash a 4.1 bootloader, and thus tripped the eFUSE or something in the Knox bootloader, what you need is a 4.3 unbrick image, as 4.4 didn't really change the modems/bootloader from 4.3, and the unbrick image isn't really that much more than a collection of pieces from the boot partition that are used as an autoboot by the phone when the eMMC fails to load properly.
This is pretty neat..
does it always work?
It's nice to have such a recover method whenever something like this happens to you.
halfdead1993 said:
This is pretty neat..
does it always work?
It's nice to have such a recover method whenever something like this happens to you.
Click to expand...
Click to collapse
I believe it will work on basically anything, as in I haven't seen a case that can't be cured at least somewhat by this, I think it works like an alternative boot, as if the bootloader on the eMMC is corrupted, it seems to remove the boot flag, thus making it so that the phone does not detect a bootable partition, the unbrick image has a partition layout mirroring the one that is supposed to be on the phone, so it is used as the boot partition but then redirects control back to whatever is on the eMMC after the bootloader, think of it as a liveCD on windows, just one that hands control back to the system after it has gotten past booting the BIOS.
Hello everyone, I have recently bought my new phone Blu Pure XL and I rooted it successfully. So as things go on I accidentally uninstall Xposed .apk and I flashed the Xposed Framework again (Which was a huge mistake); My phone would be stuck on the 2nd Boot Blu Logo screen and I read to wipe the cache. When that didn't work I just wiped everything, but.... *Sigh* Thats when things went beyond my realm of understanding. My phonr won't let me factory reset it because basically nothing is mounted.
As seen here: (make sure the "H" is connected with the "T".)
h ttp://i.imgur.com/TKHxh7R.jpg
Can anyone help? If so, how?! Anything and everything will be helpful!
Thanks!
http://forum.xda-developers.com/pure-xl/help/guide-unbrick-softbricked-blu-pure-xl-t3371981
Possible Solution Found!
tbirdguy said:
http://forum.xda-developers.com/pure-xl/help/guide-unbrick-softbricked-blu-pure-xl-t3371981
Click to expand...
Click to collapse
Thank you so much for providing this possible solution for me and I will try it out right now! I've come across this thread many of times, but I've overlooked it because it said nothing about important folders being unmounted.
Thanks!
This will definitely work... all the info you need is in that thread; read it; then read it some more, then read it one more time... then go ahead and read it again lol...
SP flash tool is your friend;
although I have few idea on possibly easier solutions (no sp flash learning curve lol)
look into flashing TWRP 2.8 from here: http://forum.xda-developers.com/pure-xl/development/twrp-twrp-blu-pure-xl-allview-x2-xtreme-t3269596 using fastboot;
then you maybe can flash the BLU ROM from here: http://forum.xda-developers.com/pure-xl/general/rom-blu-pure-xl-stock-rom-t3382722 and hope it fixes your issue (if you already have twrp make sure u are using 2.8; 3.0+ has issues with partition corruption (kinda sounds like what happened to you)
if your partition table is messed up follow the unbrick thread especially the section about flashing the condor COMPLETE rom via fastboot then reflashing to BLU (the condor ROM flash fixes the partitions so you can flash the BLU stuff)
Wish you luck and once again READ (I can be kind of an ass when it comes to questions asked without research, just FYI lol, but I do try to help those who help themselves!)
I never thought that this would happen, especially after 6 years of being an ardent flashaholic but here I am like another noob requesting for guidance.
So it started a few days back when the Flashaholic in me wanted something to divert my mind from the monotonicity of a good ROM.I was using "[8.1.x][WEEKLIES] CarbonROM | cr-6.1 [bacon]" Rom on my 3 year old bacon happily when I decided to try "Crdroid ROM for OnePlus ONE crdroid-4.6".
As mentioned in the instructions I followed the steps to each word i.e. wipe,flash rom and then gapps (using modded twrp-3.2.1-K2-bacon.)and the ROM booted fine.I setup it as usual post boot however I faced few reboots which made me doubt myself so i thought of reflashing the same ROM again but the butter fingers got the best of me and while selecting partitions to WIPE( I guess) I selected some incorrect partition and after the flash my phone went into bootloop..
I tried to boot into recovery but I wasnt able to so but I knew I could boot into recovery using Fastboot so I reflashed the recovery while in fastboot mode and ran fastboot boot TWRP.img as I wasnt able to boot into recovery with VolumeDown+Power.I tried to fetch the nandroid backup but to my astonishment it was gone and my /data partition was wiped clean.I blame myself as I must have done something wrong as I was panicked.
Since then(last sunday)my phone has been in bootloop and doesnt start in recovery unless I boot recovery from fastboot. I have spent countless hours to fix it and the things I have tried already are mentioned below
1)Flash Stock rom (CM11,CM12,CM13)
2)Erase and flash persist.img
3)Flashed CM13 snapshot or bacon_firmware_update_2015_05-15_DI.3.0.c6-00241.zip followed by RR 5.8.5 ,RR 6.0 ,Carbon rom 6.1 and c-droid 4.6
4)Flashed coloros and then stock rom(CM11,CM12,CM13) or RR 5.8.5 ,RR 6.0 ,Carbon rom 6.1 and c-droid 4.6
I have gone through this awesome guide ultimate-answer-to-bacon-flavored- by @Timmmmaaahh ,other noob friendly guides indexes , compilations ,threads on softbrick and hardbrick topics and used almost every tool created for one plus one.
I have ruled out below
1)Volume button not working as I can boot into fastboot fine using VolumeUp+Power button
2)Battery not working as my phone can stay in fastboot for pretty much a day with 50% battery or bootloops throughtout the day
I am really out of my depth and I am trying to find where I had kept my nandroid backup on Laptop/Drive but I dont think even that can help me now.I have lost a lot of precious and Important data due to my panicking and wouldnt want to lose my phone so any help and guidance would be really appreciated.
Hopefully I am posting in the correct place and havent breached any XDA rules!Aplogies in advance if I have
you are sure, that you have flash thr TWRP and not only load TWRP via sideload into the ram?
please post the command, which you have send to the phone
So I use below command to install the twrp from fasboot
fasboot flash recovery <path/twrp file>
Also I've tried to flash twrp in recovery from twrp by selecting image file option but it doesn't boot into recovery ever
I've tried twrp 2.7,2.8,3.0,3.1 and 3.2 as well on every rom that I've flasher given the compatibility.
to boot into recovery as it's not accessible I use below command
Fastboor boot <path/twrp file>
Stupid thing it seems but try different micro usb cable
vedanth123456 said:
So I use below command to install the twrp from fasboot
fasboot flash recovery <path/twrp file>
Also I've tried to flash twrp in recovery from twrp by selecting image file option but it doesn't boot into recovery ever
I've tried twrp 2.7,2.8,3.0,3.1 and 3.2 as well on every rom that I've flasher given the compatibility.
to boot into recovery as it's not accessible I use below command
Fastboor boot <path/twrp file>
Click to expand...
Click to collapse
Okay, let's optimize your environment first. Make sure the path to your adb is c:\adb (don't flash stuff like "c:\users\dinky doodle\my awesome downloads\android shizzle\recovery manizzle"). Use the amazing 15 seconds adb installer and let it install the drivers as well. @kallum7 makes a good point, do try that.
Use the TWRP recommended in my guide and follow the clean flash steps (including CM13 step again).
More importantly: check md5 hashes on all your downloads. You really want to avoid flashing a corrupted recovery download. Only continue flashing ROMs once you have a stable TWRP installation going. If it's not properly booting to TWRP, do not bother flashing anything else.
When successfully booted in TWRP, make sure MTP is enabled under mount and connect it to your PC. Browse for possible backups via your computer. If you can't find any, you've probably wiped internal memory. If you didn't make a copy to your computer, the data is most likely gone forever (sorry).
Panicking is indeed a bad idea, we've all been there and it's an excellent learning process (you'll appreciate your failures later, lol). It's better to work step by step slowly, make sure you read everything thoroughly. When in doubt, just post here and we'll follow up. We'll get there, don't worry.
---------- Post added at 08:51 AM ---------- Previous post was at 08:47 AM ----------
Oh and rename the recovery file to recovery.img and place it in your adb folder to avoid any complications. Less = more!
Because I had bricked my phone a few months ago and I changed my USB cable and it worked perfect
kallum7 said:
Stupid thing it seems but try different micro usb cable
Click to expand...
Click to collapse
Thanks mate..I did try that but it didn't endure fruitful results
Timmmmaaahh said:
Okay, let's optimize your environment first. Make sure the path to your adb is c:\adb (don't flash stuff like "c:\users\dinky doodle\my awesome downloads\android shizzle\recovery manizzle"). Use the amazing 15 seconds adb installer and let it install the drivers as well. @kallum7 makes a good point, do try that.
Use the TWRP recommended in my guide and follow the clean flash steps (including CM13 step again).
More importantly: check md5 hashes on all your downloads. You really want to avoid flashing a corrupted recovery download. Only continue flashing ROMs once you have a stable TWRP installation going. If it's not properly booting to TWRP, do not bother flashing anything else.
When successfully booted in TWRP, make sure MTP is enabled under mount and connect it to your PC. Browse for possible backups via your computer. If you can't find any, you've probably wiped internal memory. If you didn't make a copy to your computer, the data is most likely gone forever (sorry).
Panicking is indeed a bad idea, we've all been there and it's an excellent learning process (you'll appreciate your failures later, lol). It's better to work step by step slowly, make sure you read everything thoroughly. When in doubt, just post here and we'll follow up. We'll get there, don't worry.
---------- Post added at 08:51 AM ---------- Previous post was at 08:47 AM ----------
Oh and rename the recovery file to recovery.img and place it in your adb folder to avoid any complications. Less = more!
Click to expand...
Click to collapse
Hi mate,So I pulled an all nighter yesterday and was somehow magically able to boot in TWRP.I don't remember what I did but I booted into TWRP 2.8.7.0 and the first thing I did was check if any nandroid backup was there but I was disappointed to see my /data with free 55326 MB also no backups on my drive.All my data is gone and I can't curse myself enough for that,moving on so I did manage to gather my sense and flashed TWRP 3.2.1-K2 and flashed RR-O-v6.1.0 but the phone goes into boot loop again and again.
Since then my phone is displaying some weird behavior so if I unplug my device and start my phone the phone won't boot and wont go past oneplus one splashscreen so I thought my battery is gone but if I can go in fastboot mode or TWRP mode while being plugged in and unplug my device but my phone wont die,it'll be in the respective mode for ages.
I do have a clean setup (K:\oneplus\adb\) that's how I stayed away from this mess since ages but I guess I got too cocky.
I have religiously followed your thread and it has helped me a lot so once I am home I will check the TWRP part again and get back with the results.
Once again..thanks for your guidance.
vedanth123456 said:
Hi mate,So I pulled an all nighter yesterday and was somehow magically able to boot in TWRP.I don't remember what I did but I booted into TWRP 2.8.7.0 and the first thing I did was check if any nandroid backup was there but I was disappointed to see my /data with free 55326 MB also no backups on my drive.All my data is gone and I can't curse myself enough for that,moving on so I did manage to gather my sense and flashed TWRP 3.2.1-K2 and flashed RR-O-v6.1.0 but the phone goes into boot loop again and again.
Since then my phone is displaying some weird behavior so if I unplug my device and start my phone the phone won't boot and wont go past oneplus one splashscreen so I thought my battery is gone but if I can go in fastboot mode or TWRP mode while being plugged in and unplug my device but my phone wont die,it'll be in the respective mode for ages.
I do have a clean setup (K:\oneplus\adb\) that's how I stayed away from this mess since ages but I guess I got too cocky.
I have religiously followed your thread and it has helped me a lot so once I am home I will check the TWRP part again and get back with the results.
Once again..thanks for your guidance.
Click to expand...
Click to collapse
This is weird I just restarted my phone to see if it magically starts but it went into bootloop(displaying splashscreen not boot logo) in contrast to earlier when it died instantly when not plugged in also I can't boot into my recovery now!
Once I am plugged in and the phone is on bootloop and if I hold the volumedown+Powerkey it boots into TWRP properly..
This is just weird and I havent seen this behavious in the past three years of using my old lovely bacon
Try using the color os toolkit https://steemit.com/oneplus/@delusionalgenius/how-to-unbrick-oneplus-one-bacon and even though it says do not use if it is soft bricked use it this helped me
Sorry for getting back rather late (again). I'm in the middle of organizing an event and it's leaving very little XDA time. Anyway...
Isn't a hardbrick tutorial kinda agressive? I mean, I've used it before, and it's excellent, but then my device was actually hardbricked. I'd rather go for the 'back to stock' method first, setting the system back to CM13, which is a much better base for further flashing compared to ColorOS.
@vedanth123456 if you didn't take any action yet then I suggest following this thread (skip step 4!!).
The deal is to flash all images from fastboot. This will – naturally – wipe every single partition on your device!
I suggest doing the fastboot flashing manually (copy paste each command one by one) to avoid your device getting its bootloader locked. You DO NOT want to lock the bootloader on a OnePlus One if you ever wish to unlock it again.
When you successfully booted CM13, go though its initial setup, [disable recovery protection in system or developer settings] (it's been so long since I've experienced this process that I'm not sure if this option was present in CM13; if you can't find it, don't mind), get back to fastboot mode and flash K2 TWRP. First thing to do at this point: create a full nandroid backup of your working CM13 setup and copy it externally. ROM flashing should now be successful. If not, I'm afraid your hardware is failing. Do try several ROMs.
Don't forget to check those md5 hashes!
By the way, your /data is supposed to be empty after a factory reset. /data merely contains settings and app data (user added information). Backups and user media go to the /sdcard partition, which is known as internal memory. If I may suggest a ROM, go for CrDroid. It's more stable compared to RR, it's still actively developed and it has similar features.
Timmmmaaahh said:
Sorry for getting back rather late (again). I'm in the middle of organizing an event and it's leaving very little XDA time. Anyway...
Isn't a hardbrick tutorial kinda agressive? I mean, I've used it before, and it's excellent, but then my device was actually hardbricked. I'd rather go for the 'back to stock' method first, setting the system back to CM13, which is a much better base for further flashing compared to ColorOS.
@vedanth123456 if you didn't take any action yet then I suggest following this thread (skip step 4!!).
The deal is to flash all images from fastboot. This will – naturally – wipe every single partition on your device!
I suggest doing the fastboot flashing manually (copy paste each command one by one) to avoid your device getting its bootloader locked. You DO NOT want to lock the bootloader on a OnePlus One if you ever wish to unlock it again.
When you successfully booted CM13, go though its initial setup, [disable recovery protection in system or developer settings] (it's been so long since I've experienced this process that I'm not sure if this option was present in CM13; if you can't find it, don't mind), get back to fastboot mode and flash K2 TWRP. First thing to do at this point: create a full nandroid backup of your working CM13 setup and copy it externally. ROM flashing should now be successful. If not, I'm afraid your hardware is failing. Do try several ROMs.
Don't forget to check those md5 hashes!
By the way, your /data is supposed to be empty after a factory reset. /data merely contains settings and app data (user added information). Backups and user media go to the /sdcard partition, which is known as internal memory. If I may suggest a ROM, go for CrDroid. It's more stable compared to RR, it's still actively developed and it has similar features.
Click to expand...
Click to collapse
Hi mate
Apologies for not acknowledging your message and not replying back earlier. I've been traveling using a spare phone and things just aren't the same on it.
To give u an update, I tried the steps mentioned in the link (which I had tried previously as well) but the phone didn't boot. Same bootlooping and issue with the twrp.
So I went through other forums and links and finally found an exe that worked.!!!!!! So the exe seems to be an modified version of the one mentioned in the hard brick method and has been created by someone else (NOT ME!!)
My phone after many moons has booted and its on the good old cyanogen CM 11.0 XNPH44S. I've tried numerous roms on this bad boy but there is some beauty in the simplicity of the good old roms.
My phone battery is charging pretty slowly and wifi is not turning on so I'm still tensed but the fact that it booted is a small victory. I would want to upgrade to a stable rom once my phone is charged and not displaying erratic behavior so I'll wait for a day and see how it works but I'll want to upgrade to a slightly latest rom probably not a battery hogging one.
I believe I'll have to first install an old twrp followed by nandroid backup(save on every goddammed devices I own), then some CM snapshot and finally the rom but please can you confirm and suggest.
vedanth123456 said:
Hi mate
Apologies for not acknowledging your message and not replying back earlier. I've been traveling using a spare phone and things just aren't the same on it.
To give u an update, I tried the steps mentioned in the link (which I had tried previously as well) but the phone didn't boot. Same bootlooping and issue with the twrp.
So I went through other forums and links and finally found an exe that worked.!!!!!! So the exe seems to be an modified version of the one mentioned in the hard brick method and has been created by someone else (NOT ME!!)
My phone after many moons has booted and its on the good old cyanogen CM 11.0 XNPH44S. I've tried numerous roms on this bad boy but there is some beauty in the simplicity of the good old roms.
My phone battery is charging pretty slowly and wifi is not turning on so I'm still tensed but the fact that it booted is a small victory. I would want to upgrade to a stable rom once my phone is charged and not displaying erratic behavior so I'll wait for a day and see how it works but I'll want to upgrade to a slightly latest rom probably not a battery hogging one.
I believe I'll have to first install an old twrp followed by nandroid backup(save on every goddammed devices I own), then some CM snapshot and finally the rom but please can you confirm and suggest.
Click to expand...
Click to collapse
Heya!
Well, this is legacy material so I kinda forgot what TWRP worked best for the older ROMs (2.8?). The latest TWRP should be backwards compatible and support CM11 so you can give that a whirl first. You're just making a backup (no write actions) and TWRP's are easily replaced with other version so there ain't much to lose. Anyway, glad you got it running! I'd still go with the CM13 flash before moving to one of the modern ones. If you encounter more bootloops, that same exe should recover it for ya. By the way, can you PM me a link to that exe? Who knows, it might come in handy one day.
As a stable up-to-date ROM I can really suggest crDroid. I've been using it myself for a few weeks now. @chineel is a talented and devoted dev.
Timmmmaaahh said:
Heya!
Well, this is legacy material so I kinda forgot what TWRP worked best for the older ROMs (2.8?). The latest TWRP should be backwards compatible and support CM11 so you can give that a whirl first. You're just making a backup (no write actions) and TWRP's are easily replaced with other version so there ain't much to lose. Anyway, glad you got it running! I'd still go with the CM13 flash before moving to one of the modern ones. If you encounter more bootloops, that same exe should recover it for ya. By the way, can you PM me a link to that exe? Who knows, it might come in handy one day.
As a stable up-to-date ROM I can really suggest crDroid. I've been using it myself for a few weeks now. @chineel is a talented and devoted dev.
Click to expand...
Click to collapse
Try bacon root toolkit you can perform most of the things very easily.
chineel said:
Try bacon root toolkit you can perform most of the things very easily.
Click to expand...
Click to collapse
Hey man, thanks for pinching in. I'm personally not a fan of these toolkits as one can accidentally lock the bootloader and I prefer manual style because it's educational and you see more of what's going on. It's like I preferred DOS over Windows 3.11 back in the day. That's pretty much the same, right?... ?
Timmmmaaahh said:
Heya!
Well, this is legacy material so I kinda forgot what TWRP worked best for the older ROMs (2.8?). The latest TWRP should be backwards compatible and support CM11 so you can give that a whirl first. You're just making a backup (no write actions) and TWRP's are easily replaced with other version so there ain't much to lose. Anyway, glad you got it running! I'd still go with the CM13 flash before moving to one of the modern ones. If you encounter more bootloops, that same exe should recover it for ya. By the way, can you PM me a link to that exe? Who knows, it might come in handy one day.
As a stable up-to-date ROM I can really suggest crDroid. I've been using it myself for a few weeks now. @chineel is a talented and devoted dev.
Click to expand...
Click to collapse
Hi Mate,
My perils seem not to end.So after the last update I tried to start my phone and it started but as soon as I removed the power cord the phone switched off.
I realized that the issue was with the battery so I got it replaced in one of the OnePlus Authorized service center.
The new battery with only one month warranty started just fine and I could see the phone hold power without the charger attached.So I reached home and did the below
1)Flash Twrp
2)Flash CM 13 snapshot
3)Flash cdroid and gapps
4)Reboot phone
Everything seems to work as expected other than the goddamn network and the wifi.My phone has no IMEI and ofcourse I have no EFS backup stored cause of my previous fiasco.
Any ideas mate,I see forums where itts told to install color os and then cm11 and then something but I dont want to risk anything anymore .
Any advice ?
vedanth123456 said:
Hi Mate,
My perils seem not to end.So after the last update I tried to start my phone and it started but as soon as I removed the power cord the phone switched off.
I realized that the issue was with the battery so I got it replaced in one of the OnePlus Authorized service center.
The new battery with only one month warranty started just fine and I could see the phone hold power without the charger attached.So I reached home and did the below
1)Flash Twrp
2)Flash CM 13 snapshot
3)Flash cdroid and gapps
4)Reboot phone
Everything seems to work as expected other than the goddamn network and the wifi.My phone has no IMEI and ofcourse I have no EFS backup stored cause of my previous fiasco.
Any ideas mate,I see forums where itts told to install color os and then cm11 and then something but I dont want to risk anything anymore .
Any advice ?
Click to expand...
Click to collapse
you are going to have to use the colour os toolkit to get the imei info back there is nothing else you can do
---------- Post added at 05:34 PM ---------- Previous post was at 05:20 PM ----------
vedanth123456 said:
Hi Mate,
My perils seem not to end.So after the last update I tried to start my phone and it started but as soon as I removed the power cord the phone switched off.
I realized that the issue was with the battery so I got it replaced in one of the OnePlus Authorized service center.
The new battery with only one month warranty started just fine and I could see the phone hold power without the charger attached.So I reached home and did the below
1)Flash Twrp
2)Flash CM 13 snapshot
3)Flash cdroid and gapps
4)Reboot phone
Everything seems to work as expected other than the goddamn network and the wifi.My phone has no IMEI and ofcourse I have no EFS backup stored cause of my previous fiasco.
Any ideas mate,I see forums where itts told to install color os and then cm11 and then something but I dont want to risk anything anymore .
Any advice ?
Click to expand...
Click to collapse
you are going to have to use the colour os toolkit to get the imei info back there is nothing else you can do
kallum7 said:
you are going to have to use the colour os toolkit to get the imei info back there is nothing else you can do
---------- Post added at 05:34 PM ---------- Previous post was at 05:20 PM ----------
you are going to have to use the colour os toolkit to get the imei info back there is nothing else you can do
Click to expand...
Click to collapse
Mate ,can you please help me with the link ?
I know I can google it but I just dont want to take chances anymore
vedanth123456 said:
Hi Mate,
My perils seem not to end.So after the last update I tried to start my phone and it started but as soon as I removed the power cord the phone switched off.
I realized that the issue was with the battery so I got it replaced in one of the OnePlus Authorized service center.
The new battery with only one month warranty started just fine and I could see the phone hold power without the charger attached.So I reached home and did the below
1)Flash Twrp
2)Flash CM 13 snapshot
3)Flash cdroid and gapps
4)Reboot phone
Everything seems to work as expected other than the goddamn network and the wifi.My phone has no IMEI and ofcourse I have no EFS backup stored cause of my previous fiasco.
Any ideas mate,I see forums where itts told to install color os and then cm11 and then something but I dont want to risk anything anymore .
Any advice ?
Click to expand...
Click to collapse
I'd hate to say I told you so ?
Don't worry too much. The cool thing about flashing with Android is that there's always other ways to get to a working system. Plus, having a fizzled up system is how you'll learn the most about how this all works. You'll be a pro in no time. I personally got seriously into troubleshooting with a hard bricked OPO that had a wasted flash chip. Believe me when I say that's a whole other world of pain.
One question: did you wipe system/data/caches between the CM13 and the crDroid flash? That's kind of important. It would also be useful to mention the versions of everything.
I have no first person experience with broken EFS partitions but according to what I've read you'll indeed have to get ColorOS running. You could try wiping everything again and flash CM13 to see if that boots fine (with working connectivity) but I'm afraid you'll have to go through the whole works: wipe all, flash or fastboot flash ColorOS, get it running (verify IMEI), flash TWRP and backup EFS (MAKE AN EXTERNAL COPY), wipe all again, flash CM13, get it running, wipe all again, flash crDroid + Gapps, wipe caches and boot to a (hopefully) working system. If EFS broke again you can simply restore the backup made earlier instead of starting over.
Mind that when I say wipe all, it doesn't have to include internal memory or you'll be wiping backups you might need later on.
Alright, here goes your 27th attempt. Good luck! ?
mate here is the link https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 even though it says do not use on soft brick devices in your case you are going to have to
Hi all,
My op6 is stuck, unable to reboot normally with the famous Qualcomm Crashdump mode message.
The phone has the bootloader unlocked, with TWRP recovery.
1 day ago I could access the recovery even reboot with the power+volume buttons, but it got to a point where it crashes all the time, unable to do anything.
Currently is only able to enter fastboot mode.
I have heard about the MSMDownload Tool.
- Does this tool keep the files/data in the internal memory?
For me the most important thing is to be able to recover the data.
The qualcom dumpcrash mode returns several different messages like:
- stack-protector kernel stack is corrupted in:--schedule*0xB90/OXOd0 (not exact numbers)
- fatal exceptinforece_signalinject.isra.8
Is there any chance of trying something?
I am extremely anxious and worried about the situation
Please help.
Ganapatya said:
Hi all,
My op6 is stuck, unable to reboot normally with the famous Qualcomm Crashdump mode message.
The phone has the bootloader unlocked, with TWRP recovery.
1 day ago I could access the recovery even reboot with the power+volume buttons, but it got to a point where it crashes all the time, unable to do anything.
Currently is only able to enter fastboot mode.
I have heard about the MSMDownload Tool.
- Does this tool keep the files/data in the internal memory?
For me the most important thing is to be able to recover the data.
The qualcom dumpcrash mode returns several different messages like:
- stack-protector kernel stack is corrupted in:--schedule*0xB90/OXOd0 (not exact numbers)
- fatal exceptinforece_signalinject.isra.8
Is there any chance of trying something?
I am extremely anxious and worried about the situation
Please help.
Click to expand...
Click to collapse
to start: it's good thing that you can get into fastboot mode. From there you should be able to do a complete re-install of your device, e.g. using the official LineageOS instructions.
Now to your situation: unfortunately you don't write too much about it like, is your phone running stock OOS or some custom ROM? If it's a custom ROM I'd say you open a topic in the according thread. Then: how much do you know about flashing recoveries, ROMs etc.
Regarding your data: in your current situation it may be extremely difficult if not impossible to secure any personal data now. How I understand it you cannot access the crucial partitions from the bootloader, at least I never heard of methods to get there. Although, people more knowledgeable than me may know of ways. So I do hope you are having recent backups at hand, on your PC or where-ever.
In that case I would start all over (and that's how I got out of a similar situation several months ago): flash recovery, flash latest OOS to both slots, factory reset / wipe everything (to remove any encrypted data you won't be able to access anyways), flash you ROM of choice incl. other part like GAPPS, if needed, do basic setup and then finally try to recover anything that is in you backups.
I wish you a lot of patience and good luck, you'll need it, I'm afraid.
lm089 said:
to start: it's good thing that you can get into fastboot mode. From there you should be able to do a complete re-install of your device, e.g. using the official LineageOS instructions.
Now to your situation: unfortunately you don't write too much about it like, is your phone running stock OOS or some custom ROM? If it's a custom ROM I'd say you open a topic in the according thread. Then: how much do you know about flashing recoveries, ROMs etc.
Regarding your data: in your current situation it may be extremely difficult if not impossible to secure any personal data now. How I understand it you cannot access the crucial partitions from the bootloader, at least I never heard of methods to get there. Although, people more knowledgeable than me may know of ways. So I do hope you are having recent backups at hand, on your PC or where-ever.
In that case I would start all over (and that's how I got out of a similar situation several months ago): flash recovery, flash latest OOS to both slots, factory reset / wipe everything (to remove any encrypted data you won't be able to access anyways), flash you ROM of choice incl. other part like GAPPS, if needed, do basic setup and then finally try to recover anything that is in you backups.
I wish you a lot of patience and good luck, you'll need it, I'm afraid.
Click to expand...
Click to collapse
Thank you for your reply.
is your phone running stock OOS or some custom ROM?
Click to expand...
Click to collapse
Stock OOS, android 10, last release.
Then: how much do you know about flashing recoveries, ROMs etc.
Click to expand...
Click to collapse
I have basic experience installing customs roms, rooting, twrp, unlock fastboot...following tutorials, of course.
Regarding your data: in your current situation it may be extremely difficult if not impossible to secure any personal data now. How I understand it you cannot access the crucial partitions from the bootloader, at least I never heard of methods to get there. Although, people more knowledgeable than me may know of ways. So I do hope you are having recent backups at hand, on your PC or where-ever.
Click to expand...
Click to collapse
here someone says that in theory it would be possible if you have the usb debugging enable, but silly me I had it open but I deactivated it I think, so I'm not sure if I have access or not.
OnePlus 6 Stuck At "Qualcomm Crashdump" Screen All A Sudden | Data Retrieval Critical
Hi good people at XDA. This is my first post on this website and I am absolutely hoping to receive help from you all to find a way out of the depressing and extremely anxious situation I'm in. I was using my OP6 normally today and while I was...
forum.xda-developers.com
Code:
adb devices
mkdir "C:\RECOVERED_DATA"
adb pull /sdcard C:\RECOVERED_DATA
and then finally try to recover anything that is in you backups.
Click to expand...
Click to collapse
but if I do all that flashing process any backups that are in the internal memory will be erased, right?
I had photos, files, whatsapp chat history, documents...etc and they were all in the internal memory. It is not a great loss but it is important for me to be able to recover it.
in your current situation it may be extremely difficult if not impossible to secure any personal data now
Click to expand...
Click to collapse
for me it is more important to recover the files than to recover the phone. your words are discouraging
I have read other posts and maybe being able to install on top (dirty install) the same rom I have, would leave the system as it, is being able to access my files. Not even installing the whole rom but extracting the boot image from the rom and then installing it. but I don't know if I can install a rom or boot image from fastboot, or if I need to have a working TWRP first.
It is said here:
- https://forum.xda-developers.com/t/...over-without-data-loss.4080725/#post-82257413
- https://forum.xda-developers.com/t/...over-without-data-loss.4080725/#post-82261087
Ganapatya said:
your words are discouraging
Click to expand...
Click to collapse
of course that is not my intention. I just try to be realistic
As I wrote in my post, my knowledge is quite basic. I know what I read , and what I experienced with my different devices. So again: you may find instructions and real-life stories showing you ways out of there.
My experience is that you cannot connect your OP6 phone to your PC via ADB while in bootloader / fastboot mode.
a) It's either one or the other: bootloader <=> fastboot or recovery / system <=> adb. Other devices may have different options but we're not talking about Samsung but about OP.
b) I did some additional research last night but I couldn't find a single source talking about *read* access to user data from fastboot. All you can do there is flash i.e. overwrite partitions
c) keep in mind that most probably your personal data are encrypted. So even if you find a way to access your personal data from bootloader / fastboot you may not be able to read it
d) I never used MSMtool, never had to. But I did some more research about it. It looks as if you could re-flash stock ROM using that tool but to the cost of wiping everything. At least that is what the tutorials I found are saying
That said I'd say you don't have much to lose and can go trying out some things.
From my experience the qualcomm crashdump error can have it's source in a malfunctioning recovery solution; I had that when flashing a wrong TWRP version that would not be in harmony with the previously flashed OOS firmware.
From what I read our devices don't have a separate recovery partition, instead it somehow lives somewhere/somehow in the boot partition (experts: please don't crucify me if that is wrong ). So if that is the case one idea would be to extract the boot image from the stock ROM image then flash that to /boot/ from fastboot. Don't know whether that really works and helps, but in theory you would have a default boot partition and kernel *without* a conflicting recovery solution.
In case you're successful you may be able to boot into system and make backups of everything that's valuable to you.
Again: this is extremely wild guessing here, and you'll have to read in a bit on how to properly extract parts of the ROM image.
I also would *strongly* recommend that you continue asking for help in a more technical thread like the LOS19.1 one or Funk Wizard's thread about unlocking and flashing our OP6.
I wish you all luck you need!
I think your best bet it a HW solution, get someone to:
1. replace the modem IC, it's the possible cause of the qualcomm crash
2. solder a direct connection to the internal memory so you can recover your data