Related
I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help
jflynn0 said:
I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help
Click to expand...
Click to collapse
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173
dxwilliams40 said:
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?
cjohnsonthe2nd said:
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?
Click to expand...
Click to collapse
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?
dxwilliams40 said:
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?
Click to expand...
Click to collapse
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.
cjohnsonthe2nd said:
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.
Click to expand...
Click to collapse
Remember to full wipe before installation including /system and after clear dalvik and cache then fix permissions.
By not wiping /system can cause some data to be left and corrupt stock installation had this happen on my g2x and have seen it on some other threads.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
I wiped the cache before I started the install and now when I boot into the usb fastboot my comp flashed a bootloader notification but then nothing else happens. I tried it a second time and I dont even get the notification. Also if I let it boot regular the Asus screen shows when i first boot but then nothing ever comes up just black screen
Hello everybody, i'm new to the Android world (i come from iOS), and obviously i wanted to root, flash rom and etc...
My problem comes when i tried to flash CM10.1 (the one from lliar) after rooting and flashing recovery, until now all ok, i flashed CM but i forgot to flash the boot.img so i got stuck in the cyanogenmod loading screen!
"Haven't you try to boot in bootloader?" Yes, i tried also to boot recovery, but the all-in-one tool by hasoon2000 i used to root, gives me an error in the prompt that says: "error:device not found", so i can't boot in bootloader and recovery.
I haven't found anything about my problem on xda or google, but i know that i can solve it, question is: how?
Please help me, i really don't know what to do.
Thanks to all, davisons95
Are you able to get into recovery? You haven't said anything that you can get into recovery if so try flashing a stock Rom.
Sent from my LG-LG730 using xda app-developers app
stuck too
Hi there.
I habe a similar issue with my one x+
Here's what I die:
- i rootet the mobile
- flashed twrp 2.6.0.0
- used factory reset Form bootloader
- used twrp install Tod flash the hox+ release for CM10.1 and gapps
- wiped cache/davelik
- reboot system via twrp after successful flashing the Roms
- Ende up each time I reboot in twrp AS if the flashing failed somehow
Any ideas how to geht oft of this?
Any tips in ADB sideload?
please help, any advise appreciated, THX.
Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?
I can't change my current ROM, I'm running Baked with Android 4.2.2, I had TWRP 2.7.0.0 and now I upgraded to 2.8.0.1 with the same results.
I've tried with several ROMS, I do the steps for each rom carefully, making a backup before doing a full wipe, etc, and after the install, when I reboot, I get stucked on the loading screen, I don't even see the custom ROM logo, just the Asus logo.
After the boot loop, I enter again in recovery and recover the Baked backup, and it works again.
I'm really desperate because the Baked ROM don't run well, is very slugish, so for me an upgrade is mandatory.
I've tried with several custom ROMs, the last one I tried was KatKiss Lollipop.
Any help would be greatly appretiated
krusty_da said:
I can't change my current ROM, I'm running Baked with Android 4.2.2, I had TWRP 2.7.0.0 and now I upgraded to 2.8.0.1 with the same results.
I've tried with several ROMS, I do the steps for each rom carefully, making a backup before doing a full wipe, etc, and after the install, when I reboot, I get stucked on the loading screen, I don't even see the custom ROM logo, just the Asus logo.
After the boot loop, I enter again in recovery and recover the Baked backup, and it works again.
I'm really desperate because the Baked ROM don't run well, is very slugish, so for me an upgrade is mandatory.
I've tried with several custom ROMs, the last one I tried was KatKiss Lollipop.
Any help would be greatly appretiated
Click to expand...
Click to collapse
What is your bootloader version ?
Are you doing a full wipe before installing ?
Thx Josh
If you can adb to it then go for a full wipe and try...same thing happened to me going from stock 4.2 to katkiss 4.4.4..
Look for the post i just did in tims thread for 4.4.4.. its got the links to the post...
Remember. ..wipe 'misc' as it seems gremlins like to hide in there..
Worked for me...
lj50036 said:
What is your bootloader version ?
Are you doing a full wipe before installing ?
Thx Josh
Click to expand...
Click to collapse
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
dgcruzing said:
If you can adb to it then go for a full wipe and try...same thing happened to me going from stock 4.2 to katkiss 4.4.4..
Look for the post i just did in tims thread for 4.4.4.. its got the links to the post...
Remember. ..wipe 'misc' as it seems gremlins like to hide in there..
Worked for me...
Click to expand...
Click to collapse
I installed ADB on my pc (win8 x64), and started to do the blob backup mentioned on the first link in your other post, followed all the instrucions, after the "Step 1" in the "Wheelie" menú, the tablet shuts of, as it should, but when I turn it on again, it no longer boots into android, it gets stuck in a boot loop, now I don't have TWRP anymore, I have the FlatLine CWM, so I can't recover the image created with TWRP, so I'm stuck with recovery,
I'm still trying to fix it, I'll try to revert to stock and start from there.
Thanks to the both of you, wish me luck!
krusty_da said:
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
Thanks to the both of you, wish me luck!
Click to expand...
Click to collapse
That is the issue mate you need to be on the bootloader ending with 27.5 ....... :good:
Let me know if you need any help making that happen .....
Thx Josh
krusty_da said:
My current bootloader is 10.6.1.15.3, and I'm doing a full wipe, I follow carefully the instructions every time.
I installed ADB on my pc (win8 x64), and started to do the blob backup mentioned on the first link in your other post, followed all the instrucions, after the "Step 1" in the "Wheelie" menú, the tablet shuts of, as it should, but when I turn it on again, it no longer boots into android, it gets stuck in a boot loop, now I don't have TWRP anymore, I have the FlatLine CWM, so I can't recover the image created with TWRP, so I'm stuck with recovery,
I'm still trying to fix it, I'll try to revert to stock and start from there.
Thanks to the both of you, wish me luck!
Click to expand...
Click to collapse
Yes, dont worry too much as I was in the same boat.. lost the recovery a few times.. and or couldn't get recovery to mount any partitions..
If you have still got ADB connection then use Busters wipe... multiple times.. as it cleaned mine out..
Then I used the easyflasher to flash the CWM kitkat Version and used this to flash Tims Kitkat off the external SDcard..
booted in to Kitkat with out loading Gapps.. let it settle then booted in to the recovery then booted to Bootloader..
and reflashed TWRP 2.8.. flashed Gapps with this and its all settled in..
One thing that I made sure off was to boot the device after flashing a recovery.. somewhere in all the instructions it says to to this.. So I made sure I did it..
otherwise I kept getting that password screen in TWRP...and if i got that then I knew it was not mounting anything..
K.. keep at it.. if there is will there is a way and as said if you have an unlocked bootloader and ADB you are half way there already..
Good luck..
lj50036 said:
That is the issue mate you need to be on the bootloader ending with 27.5 ....... :good:
Let me know if you need any help making that happen .....
Thx Josh
Click to expand...
Click to collapse
Thanks! I'm loading Lollipop for the fisrt time now!
I found a tutorial here to change the bootloader:
http://forum.xda-developers.com/showthread.php?t=2187982
And downloaded the latest firmware from here:
http://www.service.asus.com/#!downloads/c1wax
Thanks again