[Q&A] Which 5.0 lollipop version are you using? - Galaxy Tab 2 Q&A, Help & Troubleshooting

Q&A for Which 5.0 lollipop version are you using?
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Which 5.0 lollipop version are you using?. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Well im using the sokp lollipop rom
Works cool

Slim lollipop

Tried CM12 on my P5113, (from CM11) ran fine for 2 weeks with clean install everything working , then out of nowhere tab was dead.
Reinstalled CM11 and not looking back. Kitkat is the end of the line for these tabs. (Tab2's).
Pp.

Slim LP
LāvLab / HostileSlothRecords

LavLab said:
Slim LP
LāvLab / HostileSlothRecords
Click to expand...
Click to collapse
i think we must call slim lp.......................................................slimpop

The rom which I am using is in my signature

PanchoPlanet said:
Tried CM12 on my P5113, (from CM11) ran fine for 2 weeks with clean install everything working , then out of nowhere tab was dead.
Reinstalled CM11 and not looking back. Kitkat is the end of the line for these tabs. (Tab2's).
Pp.
Click to expand...
Click to collapse
+1.......totally agree.

Related

[Q&A] |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|

Q&A for |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
4.4.4 firmware
I've just installed the 4.4.4 firmware a.k.a 3.28.605.4 and all seems to be working great.
Sure hope we'll see a 4.4.4 based SkyFall in the near future.
What????!! Our dev left? What's everyone switching to?
Sent from my Verizon M8 running Skyfall
Well, I've heard rumblings that ARHD (Android Revolution HD) v22.x may finally support CDMA HTC One devices now that Verizon 4.4.4 kernel source is out...we will wait and see. I think some folks have been able to flash prior ARHD ROMs but I haven't seen a guide/how-to for CDMA devices anywhere yet. ARHD is a popular ROM and a lot of the philosophies seem similar to Skyfall. Otherwise, there's always CleanROM or (shudder) Viper.
I suppose a lot of us may finally make the switch to a GPE-based ROM in the next few weeks as the Lollipop update is available.
oh no!! I can't believe it!! I was hoping to at least get a Lollipop Update!!
I thank you for all your work @iB4STiD
I really enjoyed it on my M8, now I guess I will have to look for a new close to stock rom for lollipop out there !!!
THANK YOU!!

[Q&A] [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]

Q&A for [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bracketslash said:
New build is up for cm12 with advanced reboot.
cm-12-20141121-180449-blisscm-UNOFFICIAL-m8
https://www.androidfilehost.com/?fid=95784891001614178
Click to expand...
Click to collapse
@bracketslash are you not maintaining build on http://forum.xda-developers.com/ver...ment/cm12-unofficial-unstable-builds-t2941198 anymore?
mulhearn22 said:
@bracketslash are you not maintaining build on http://forum.xda-developers.com/ver...ment/cm12-unofficial-unstable-builds-t2941198 anymore?
Click to expand...
Click to collapse
I believe the d/l link there is the same as here. I will only be discussing here.
Quick general question about lollipop. I noticed in these builds (along with the kang / leak of gpe for the m8) that the ability to separate the notification and ring volumes is not available. Is that capability not available across the board on all lollipop roms on all devices?
One of the compelling reasons for me to use cm over other roms is Profiles. Profiles are in the CM12 builds but so far really don't work as in CM11 due to this limitation.
Thanks.
Sent from my One M8 using Tapatalk
alershka said:
Quick general question about lollipop. I noticed in these builds (along with the kang / leak of gpe for the m8) that the ability to separate the notification and ring volumes is not available. Is that capability not available across the board on all lollipop roms on all devices?
One of the compelling reasons for me to use cm over other roms is Profiles. Profiles are in the CM12 builds but so far really don't work as in CM11 due to this limitation.
Thanks.
Sent from my One M8 using Tapatalk
Click to expand...
Click to collapse
Keep in mind we JUST got lollipop source, certain features will take time to add back in. This is EXTREMELY early in development so please just bear with us while we attempt to get everything back up to speed.
Using CM12.1 and was referred to this thread. I use it as my daily driver and am against using MultiROM because it's a pain sometimes. Anyone else using 12.1 Sept-01-2015 build? Curious to know if you have a 3rd party kernel and which one?
Sent from my m8wl using Tapatalk
How long until CM12 is compatible with project fi

[Q&A] {ROM} Verizon to Sprint port 4.4.4 MOds And MOre

Q&A for {ROM} Verizon to Sprint port 4.4.4 MOds And MOre
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for {ROM} Verizon to Sprint port 4.4.4 MOds And MOre. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Booting up
I am on the Sac23 Port and can't get it this rom to boot up. any suggestions?
psixichka said:
Clock FC doesn't work
I was late for work lol
S note doesnt work either
Click to expand...
Click to collapse
installed this rom twice
I have tried this rom twice. With multiple wipes before installing. I can get the Rom loaded, complete the setup process while fighting the health services FC issue. I also get a FC on ITSOn and SAE after installing the update file. I also tried the health fix .zip, which did work for a moment but eventually the fc was coming up again. The Rom looks promising and cannot wait to get a more stable version.
One more thing, when I go to settings/ about device, settings force closes also .
I'm guessing with our locked bootloader on Verizon this would be impossible to run on Verizon with safestrap??? Loved your rom on the s4

[Q&A] DXMD3 - eRobot ROM for G-TAB 7.7

Q&A for DXMD3 - eRobot ROM for G-TAB 7.7
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for DXMD3 - eRobot ROM for G-TAB 7.7. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can anyone port the [ROM] 24 Dec [Aroma] [P6810 / P6800] for i815
Alcoforado said:
Still using my p6800 (less and less as a phone now, but still good for comic reading, casual gaming and movie watching )
And while i think daniel_hk has been making a terrific job keeping the device updated, so far i keep getting back to a DXMD3 build for stability (can't get BT to connect to my car in any of the 4.4 builds and battery drain is too erratic).
From these, the " erobot 2.3P Last version" seems to me the less bloated than the skyhigh (don't really care for multi window...),can play movies in full screen and the battery use seems more "balanced". Only problem is that google now ins't working properly... keeps giving "you need to update" ...
Click to expand...
Click to collapse
Can anyone port the [ROM] 24 Dec [Aroma] [P6810 / P6800] MULTI-LANGUAGE JB 4.1.2 | SkyHigh [v3.5] for the i815? I like very much for this rom and i have this in my P6800 but a friend of mine bring me a i815 from USA and i wanna install this rom in the device.
Thanks for any help

[Q&A] [rom] [tw 4.3][ml1] samstock 1/6/14

Q&A for [rom] [tw 4.3][ml1] samstock 1/6/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom] [tw 4.3][ml1] samstock 1/6/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Battery Drain
Hi,
I have a S3 i535 phone which was already rooted when i got it. It was running on some customer rom may be it was jellybean 4.1.2.
My bad luck, i tried updating the features i tried installing few other customer roms . Here my problems started.
Few roms i flashed were not functioning, i just get Samsung logo after restart nothing else. Few other crashes camera.
I got this Rom by chance and was very happy using it. i have what i need. No issues with camera or any other app.
I used it for almost 1 week and noticed that my battery is draining very fast.. I tried going into recovery and flashing the rom again, same result, battery still draining fast.
I have used CM 10.2 rom too and it gives decent battery backup so i know its not the battery.
Either am doing something wrong or may be some issue with rom.
One more question.
currently i am on 4.3.1 . is it possible for me to go back to 4.1.2. if yes, kindly explain me(Am dummy)
I have tried installing but gets stuck on Samsung logo and then i have to flash some other rom
# I am using TWRP recovery.
Or, if you can suggest me some other good roms or kernels that i can try.
Hope to get a reply and help soon.

Categories

Resources