Related
Q&A for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lord Boeffla said:
Hi all,
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
Update zzmoove to version 1.0-beta1 (credits to ZaneZam)
Update exFat driver to 1.2.9
Update the flash binary in the boeffla-kernel-reset recovery script, bump to version 3.1
Enjoy
Andi
Click to expand...
Click to collapse
It sjust awesome
help to find kernel n8013
Someone.. anyone.. where can i find this kernel ? a download link would great.. thanks in advance..
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
As always... Read the op.
Then you will see everything is here:
www.boeffla-kernel.de
Andi
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Araragi said:
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Hm... are you talking about leaving Boeffla-Kernel or moving to Boeffla-Kernel?
If you leave Boeffla-Kernel, you do not need to use any cleaner script. Boeffla stores everything under /data/.boeffla, and this cannot be used by any other kernels.
If you move to Boeffla, also usually no cleaning before required.
Only exception: If you were on a kernel before that stored all his configuration into init.d scripts, then you should cleanup your /system/etc/init.d folder before flashing Boeffla.
That's all however.
Andi
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
w_ayon said:
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
Click to expand...
Click to collapse
All you need is on the homepage, as stated in the OP of all kernel threads.
www.boeffla-kernel.de
Andi
ALL: Google is again playing games and locked down the first of my 3 donation apps in Playstore. Of course no compelling reason provided.
But as I already prepared for that half a year ago, I would like to remind you to use your personal unlock key to gain donation functionalities.
If you have not yet generated (this can be done in the donation app itself) and entered it into Boeffla-Config, it is now urgent to do that!!!
I cannot ensure Google will not lock down the other two donation apps as well soon, so you should be prepared now.
From my side, next Boeffla-Config app version will not support these donation apps anymore but only personal unlock codes.
Also, I will replace remaining donation apps in Playstore very soon (today or tomorrow) with a dummy app that tell users to get in touch with me manually.
Thanks for understanding... and alohas Google, all done wrong, guys there.
Cheers
Andi
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
sarvar97 said:
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
Click to expand...
Click to collapse
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Lord Boeffla said:
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Click to expand...
Click to collapse
Thanks a lot, the kernel is fantastic.
Hi from Russia. Excellent operation! I tried to pay, but my payment system of it doesn't allow to make. Sorry. The kernel for N8000beta5 isn't set through TWRP2.8.3.0 "error bynary". I set through Odin. Everything is great. Good luck!
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Lord Boeffla said:
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Click to expand...
Click to collapse
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
But this is unexplainable then... the flash binary has not changed for more than half a year.
However I got to know in the OnePlus One thread, TWRP seems to have introduced some issues lately. But never used TWRP myself, so it is just second hand information I have seen.
Andi
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
Ah, but can be something else.
In order to avoid people are flashing wrong kernels, I put asserts in.
Could you please just boot your tablet and look in /system/build.prop file what the entries are there for:
ro.build.product
ro.build.model
ro.build.device
Many thanks
Andi
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Lord Boeffla said:
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Click to expand...
Click to collapse
I redownload N8000beta5 of 31.01.2015. Now everything is good. The kernel is set through TWRP and Philz. Gnabo v8 firmware. Thanks! Good luck!
problem with boeffla kernel v3 beta 6 for samsung note 10.1 (n801x)
Hi ! I am using the samsung kitkat stock rom 4.4.2 rooted in a samsung galaxy note 10.1 (n8010). First time trying a kernel. I have tried to install the boeffla kernel mentioned in the title, both via odin and trwp, but i have the same problem once installed... when rebooting the tablet it just stays in a black display after the "samsung galaxy note 10.1" title. It just does not start, i have to boot in download mode and reinstall the stock rom via odin. Help please! I would like to try this kernel in my tablet ! Thanks!
Hi all!
Time has come for Lollipops flavours for our old, but still alive device: Huawei Honor -u8860.
Thanks to @Blefish, we have now a new device tree and kernel 3.4
it tooked a lot of work and time to that talented dev to get us a rebirth of our device, named: LegacyHuawei.
How to install Lollipop rom on u8860: all needed files (recovery, blepart1.1 (lvm script) , gapps and cm12 rom ---> http://sourceforge.net/p/legacyhuawei/wiki/Installation/
Installation instructions located in Wiki. Don't forget to read it as you need to install latest TWRP before installing this ROM.
If you decide to uninstall this ROM (install cm11 or others without LVM support), keep in mind that if you installed LVM setup, you need to uninstall it or your phone will end up in a bootloop. If you have any issues please Provide logcat: http://sourceforge.net/p/legacyhuawei/wiki/Submitting logs/
Logcat can be provided with syslog app:
https://play.google.com/store/apps/d...l.syslog&hl=en
direct download of syslog apk : https://github.com/Tortel/SysLog/SysLog.apk/qr_code
B919 stock rom base http://www.mediafire.com/download/z136402ocabf4t6/4.0.3+b919.rar
http://forum.xda-developers.com/showthread.php?t=1591997
I strongly advice people to backup their imei
If you are set with cm12, then, you will be good to go with all the others Lollipop flavours ( roms ) i can propose.
All the roms i will provide have device tree source here: https://github.com/Blefish?tab=repositories
and the kernel source i use is here: https://github.com/desteam/android_kernel_huawei_msm7x30
which difference between Blefish kernel and mine? : i updated Blefish kernel which is 3.4.0 to 3.4.106.
there is a Q&A thread to keep the thread clean and also for new user who are not allowed to post
But for now let's begin with :
Blisspop: https://github.com/TeamBliss-LP rom: http://www.mediafire.com/download/sooq4zz6cmwkwkh/BlissPop-v2.0-u8860-UNOFFICIAL-20150216-1648.zip
More information about Teambliss and Blisspop: http://forum.xda-developers.com/one...m-bliss-stalk-team-bliss-bacon-10-28-t2921057
Liquid Smooth https://github.com/LiquidSmooth rom: http://www.mediafire.com/download/ku63me9f90upkkm/LS-LP-v4.0-2015-02-17-liquid_u8860.zip Bugroblem with vibration
Beanstalk Sources: https://github.com/scotthartbti Rom: http://www.mediafire.com/download/u0f9nt1xbsqqi83/BeanStalk-5.0035-20150223-u8860.zip
PAc-Man Sources : https://github.com/PAC-man rom : http://forum.xda-developers.com/showpost.php?p=59079167&postcount=33
F2FS http://forum.xda-developers.com/showpost.php?p=59079256&postcount=34
Now let's compile other flavour
reserved
same here
again
one more
last one, your turn now!
Update file
Hi desalesouche,
is the update file http://sourceforge.net/projects/legacyhuawei/files/latest/download?source=files
only for U8800, or also for U8860?
PeterPan1964 said:
Hi desalesouche,
is the update file http://sourceforge.net/projects/legacyhuawei/files/latest/download?source=files
only for U8800, or also for U8860?
Click to expand...
Click to collapse
There is for u8800 and there is for u8860 but there is not for u8800pro.
desalesouche said:
There is for u8800 and there is for u8860 but there is not for u8800pro.
Click to expand...
Click to collapse
I guess he is about ***-U8800-update1, wihich is with the latest patches.
There is no update for u8860
JekaPinsk said:
I guess he is about ***-U8800-update1, wihich is with the latest patches.
There is no update for u8860
Click to expand...
Click to collapse
Right, there is no small update file, but there is a fresh U8860-ROM from 02-15-2015. Maybe that helps...
If you need U8800pro feedback send me a pm. I'll test asap.
coming...
under test
I've just tested USB-Host mode on U8860, and it really works!!! Official Huawei specifications says that our chip does not support USB-Host, but IT DOES!!! Wow!!!
Tested mouse and keyboard... Mouse lags a little bit because our device is slow sometimes...
And also flash drives, even NTFS-formatted flash drives work...
The constraint seems to be that USB port can only output 200mA, and charging is impossible in USB host mode, so you should not forget to disable Host mode after using it... The option is in the special HuaweiSettings app...
I'm using cm-12-20150215-UNOFFICIAL-LegacyHuawei-u8860
Liquid Smooth on op
compiled with linaro 4.10 experimental and O3 optimisation.
please give feed back
edit: TWRP Touscreen problem: @Blefish is working on that problem.
5.1 coming soon...
http://www.xda-developers.com/android-5-1-details-whats-changed/ :cyclops:
coming...
under test...
desalesouche said:
under test...
Click to expand...
Click to collapse
Hello again - I found you!
When testing blefish's builds of CM12 for our device, I had continous wifi errors, which made the ROM unuseable for me.
So I gave your BlissPop a try. Thankfully, I did!
The wifi issues seem to be gone, I still have problems with sensors in my device, but they don't disturb me that much...
Looking foreward to flash new builds.
Huawei FM Radio on Lollipop?
Is there any chance to get a working FM Radio on U8860 Lollipop?
Hi guys,i have a problem i can not install the rom,because when i put the TWRP 2.8.5.0 and reboot into recovery outside the Sd does not see it more and i can not install the rom,where am i wrong?I have to start from the B919 without memory repartition to install the rom?
Thanks in advance for any answers !!!
android_paul said:
Is there any chance to get a working FM Radio on U8860 Lollipop?
Click to expand...
Click to collapse
Blefish will do something about that. the code need to be rewritten properly, but spirit fm can be use in the future.
just some patience about that .
Hey guys!
I was wondering if it was possible to flash any custom rom on any device... or to make it compatible with our device.
Like, can I install cyanogenmod 13/12/11 on my device, Micromax Canvas Juice 2 Aq5001?
Thank you.. I look forward to your answer...
Not exactly Cyanogenmod but it's a Custom ROM
http://forum.xda-developers.com/android/development/rom-aosp-rom-5-0-2-micromax-canvas-t3216783
I haven't found much about your device sadly... I hope that ROM satisfies you. I don't know about the download links though as you have to message the OP... Good luck with it. He claims that he's porting a Marshmallow ROM to it.
Thank you!!
KawaiiAurora said:
Not exactly Cyanogenmod but it's a Custom ROM
http://forum.xda-developers.com/android/development/rom-aosp-rom-5-0-2-micromax-canvas-t3216783
I haven't found much about your device sadly... I hope that ROM satisfies you. I don't know about the download links though as you have to message the OP... Good luck with it. He claims that he's porting a Marshmallow ROM to it.
Click to expand...
Click to collapse
Thanks friend for your review... I have another question too... Can we edit any custom rom to match our phone's hardware requirement? Can you suggest me a way please M
Rockhoney said:
Thanks friend for your review... I have another question too... Can we edit any custom rom to match our phone's hardware requirement? Can you suggest me a way please M
Click to expand...
Click to collapse
Well, porting a custom ROM isn't very easy. I would suggest asking the Original Poster of the thread I sent you if you plan on developing a custom ROM. You could always clean up an existing ROM and add your own customization options. Xposed framework and Layers provide for lots of customization..
KawaiiAurora said:
Well, porting a custom ROM isn't very easy. I would suggest asking the Original Poster of the thread I sent you if you plan on developing a custom ROM. You could always clean up an existing ROM and add your own customization options. Xposed framework and Layers provide for lots of customization..
Click to expand...
Click to collapse
Well, I tried using Xposed framework but it doesn't support my android system.
Any other thing I can do?
Rockhoney said:
Well, I tried using Xposed framework but it doesn't support my android system.
Any other thing I can do?
Click to expand...
Click to collapse
Did you try flashing the api 21 version?
(API 23 for Marshmallow)
(API 22 for Android 5.1)
(API 21 for Android 5.0)
(API 19 for Android 4.4)
KawaiiAurora said:
Did you try flashing the api 21 version?
(API 23 for Marshmallow)
(API 22 for Android 5.1)
(API 21 for Android 5.0)
(API 19 for Android 4.4)
Click to expand...
Click to collapse
Nope.... I don't know much more about these...
Can you explain me please?
(Sorry for troubles)
Do you have a custom recovery that you can flash zips with? You have to flash an xposed framework zip file for it to work
KawaiiAurora said:
Do you have a custom recovery that you can flash zips with? You have to flash an xposed framework zip file for it to work
Click to expand...
Click to collapse
I tried searching a lot for a custom recovery... But couldn't find one. I found out one.. I will install it later.. Can you link some framework zip's please?
This is the post for the downloads (API 21 to 23 (5.0 to 6.0))
http://forum.xda-developers.com/showthread.php?t=3034811
Download the appropriate ZIP and flash it.
(I would suggest doing a backup in the custom recovery you found so if anything goes wrong, you can revert back)
KawaiiAurora said:
This is the post for the downloads (API 21 to 23 (5.0 to 6.0))
http://forum.xda-developers.com/showthread.php?t=3034811
Download the appropriate ZIP and flash it.
(I would suggest doing a backup in the custom recovery you found so if anything goes wrong, you can revert back)
Click to expand...
Click to collapse
Thank you for your help.. I appreciate it so much.. If I need something else... I will contact you...
Hi guys today I'm here with Aosp (v-1.0) ROM for cool 1 dual with clean interface.
Known bugs: IR not working. (Trying to solve this problem)
Instructions:
1.First Flash the ROM file
2.Flash the gapps file and
3.Flash the launcher file (Important)
Don't disturb the order.
Links:
ROM : https://drive.google.com/file/d/0B8JxoJ1KE5wdVjlMbWVrSUhpRm8/view?usp=drivesdk
Gapps : https://drive.google.com/file/d/0B8JxoJ1KE5wdZUlJUURQY19NTEE/view?usp=drivesdk
Launcher : https://drive.google.com/file/d/0B8JxoJ1KE5wdNlN2Q0c1UGloVXM/view?usp=drivesdk
Note: You can change the launcher if you want after booting up, but you need to flash launcher zip provided with ROM and gapps
Credits: Me for sharing ROM
Sanjay Sudhakar for removing unwanted Chinese apps and adding some ringtones
Need developers for cool 1 join us on WhatsApp https://chat.whatsapp.com/HJUDJ57F5tFJk1YMfh5nlA
Screenshots:
Hey Kaushik here, thumbs up to both u guys for sharing the ROM and modifying it, kindly update the post with Bugs (if any) for better transparency
plz provide android 7.1.1
iampank said:
plz provide android 7.1.1
Click to expand...
Click to collapse
Bro still the kernel codes are not released. The developers are ready to make custom roms. I will provide 7.1 after kernel​ codes are released
Smustfa147 said:
Bro still the kernel codes are not released. The developers are ready to make custom roms. I will provide 7.1 after kernel​ codes are released
Click to expand...
Click to collapse
company release kernal codes...? so long time... When should they release
Gets into bootloop. This thread is a joke!
trelokeeper said:
Gets into bootloop. This thread is a joke!
Click to expand...
Click to collapse
No bro we are using it. I think you made mistake while flashing zips, maybe you flashed in wrong order
twrp for cool 1
I have tried many method but always I am unable to twrp for cool 1 help me
Sometimes it shows in cmd -- unknown remote command help me plz
piyush7252 said:
I have tried many method but always I am unable to twrp for cool 1 help me
Sometimes it shows in cmd -- unknown remote command help me plz
Click to expand...
Click to collapse
I can't understand you say clearly
There are no emojis and i can't change the fonts.
Is dual camera working???
Slr mode working??
ankitdodiya said:
Slr mode working??
Click to expand...
Click to collapse
No
is nougat available?
Smustfa147 said:
No
Click to expand...
Click to collapse
is nougat available now... cz cool1 recently got an downgraded eui with changed kernel & coolpad updater... is custom rom development possible now?
sdr.19 said:
is nougat available now... cz cool1 recently got an downgraded eui with changed kernel & coolpad updater... is custom rom development possible now?
Click to expand...
Click to collapse
Downgrade doesn't matter and most of the developers are working on nougat rom as we have jui
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
skaterpunk001 said:
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
Click to expand...
Click to collapse
No
At Sony website there are already 7.0 binaries available, does it help?
skaterpunk001 said:
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
Click to expand...
Click to collapse
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Most of the sources are in SonyLOS repository (if you want to experiment)
By the time, seems that system can be compiled succesfully but not the kernel, which gets built into boot.img but phone fails to start.
rmnhg said:
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Most of the sources are in SonyLOS repository (if you want to experiment)
By the time, seems that system can be compiled succesfully but not the kernel, which gets built into boot.img but phone fails to start.
Click to expand...
Click to collapse
Can you compile cm14.1 for d2212?
rmnhg said:
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Click to expand...
Click to collapse
Sounds promising. If you need help and if you have any guidance I could maybe support you. I'm also a software engineer but not an Android Kernel hacker. Maybe I can assist you if there are some good tutorials. Just let me know
Dhruv7508 said:
Can you compile cm14.1 for d2212?
Click to expand...
Click to collapse
Maybe but I'm not sure.
rmnhg said:
Maybe but I'm not sure.
Click to expand...
Click to collapse
Do you have d2212?
skaterpunk001 said:
Sounds promising. If you need help and if you have any guidance I could maybe support you. I'm also a software engineer but not an Android Kernel hacker. Maybe I can assist you if there are some good tutorials. Just let me know
Click to expand...
Click to collapse
Yes, I can make a LineageOS based guide, like this one but with flamingo's repos. In my free time I can do it.
---------- Post added at 18:54 ---------- Previous post was at 18:52 ----------
Dhruv7508 said:
Do you have d2212?
Click to expand...
Click to collapse
No, I've LTE version (D2203) but perhaps porting some patches from eagle (which has the same processor) I can make it work, but first I need to compile a working rom for D2203.
rmnhg said:
No, I've LTE version (D2203) but perhaps porting some patches from eagle (which has the same processor) I can make it work, but first I need to compile a working rom for D2203.
Click to expand...
Click to collapse
Best of luck, i hope soon you'll develop a ROM
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the ROM here.
Click to expand...
Click to collapse
Best of luck dude, I would be thankful if a ROM was developed soon..
can some of you guys help me with the test point of d2203
i hard bricked it and the only solution i might have is that!!
please/? or how to find the testpoint
I have a 2243, that works almost like 2203. It is a GSM with LTE. (I don't really know the difference between them ) If anyone want to use it as a laboratory, just tell me I already do this. I had flashed so may ROM's at my own risk.... One more won't make difference at all haha
I'm facing some problems with RAM (compilation stops at 40% becouse of the memory) so the rom may come later, when I can fix all the issues.
rmnhg said:
I'm facing some problems with RAM (compilation stops at 40% becouse of the memory) so the rom may come later, when I can fix all the issues.
Click to expand...
Click to collapse
Ok, No problem...
Any progress on this?
skaterpunk001 said:
Any progress on this?
Click to expand...
Click to collapse
Go here
@dhruv thanks for the link sadly the camera does not work, so it's a no-go for me. But thanks to all for providing custom roms for the Sony Xperia! You are awesome guys!
Hello we are currently working on camera and other thinks or project , we sorry this does not suit you but we do our best