After a few weeks since I got my OnePlus, I'm having a strange problem. Whenever I try to copy any sort of data to/from the phone, a few seconds after task has been started I get this error
"Cannot copy file.xxx
The device has either stopped responding or has been disconnected"
Also, the OTG storage devices get unmounted randomly and notification pops up
"USB storage unexpectedly removed"
I reached the concusion (like most of you would) that maybe USB port is malfunctioning.
But here is the twist:
If I connect my phone in MTP mode while in TWRP, the copying/pasting just occurs successfully each time. Even if I mount OTG in TWRP, USB storage works as it should without any issues.
I've already tried:
-changing different ROMs (PA, CM)
-flashing stock kernel, recovery and rom
-using different USB cables
-using different PC
-changing in between MTP and PTP
-copying directly to root, folders and sub-folders
But each time, the copying and OTG storage fails while booted into OS but works normally while using TWRP
[BTW I created accidentally created a duplicate thread in development section which I can't remove]
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
OnePlus One
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
ONE Q&A, Help & Troubleshooting
PS. I can see you've also posted the exact same topic here. Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. We'll have that secondary thread removed as you'll be getting help soon in the appropriate section for your device.
Hello friends,
I have seen many people's reporting issues with oneplus one OTG/USB connection.
Sometimes it works for few minutes and then disconnects. But it works fine in trwrp mode.
I too have same problem and have tried various methods to resolve the issue,
One of the solution i tried is flashing cm12 nightly..but the issue resurface very often.
The work around i found is " To disable the mobile data connection and then connect the OTG.
It should resolve your OTG problem, meanwhile developers provides some concrete solution.
Regards
Nadeem Patel
Sent from my Venue 8 3830 using XDA Free mobile app
Related
Q&A for [ROM][KITKAT]BeanStalk-4.4.4065-OC2 [4.4.4](14/10/09)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Windows 8 USB Problems
Hi! I installed this rom since the cyanogenmod one had been giving me problems and huge slowdowns.
Everything seems to work amazingly, but for some reason can't get it to connect to windows 8 through USB.
It was working with the other rom, now it is detected but it just says Android, like it's not detecting which driver to use, and cannot access as external harddrive nor make it work using adb.
Any help/ideas will be deeply apreciated.
demon000 said:
Hi! I installed this rom since the cyanogenmod one had been giving me problems and huge slowdowns.
Everything seems to work amazingly, but for some reason can't get it to connect to windows 8 through USB.
It was working with the other rom, now it is detected but it just says Android, like it's not detecting which driver to use, and cannot access as external harddrive nor make it work using adb.
Any help/ideas will be deeply apreciated.
Click to expand...
Click to collapse
I wanted to answer as quickly as possible, however I am not completely firm on the answer.
I had win8 on my latest laptop for about 10 min when I bought it. I only sorta remember something it was going to be good at. Something about , after a boot, being able to walk backwards into the bios level to drop off various settings. Not unlike, telling it that there is new hardware to be expected next boot?
Please, anybody, jump in here if you want before I find a way to back this up.
Keep at it tho. It would be hard enough to get the answer you want dealing with strait Android+(all of the *.apk combos out there).
Will try.....
Try this?http://systems.engr.ucr.edu/tutorials/documents/Windows%208%20Hotkeys%20Complete.pdf
TRom's has always been great for random PC stuff http://www.tomshardware.com/reviews/windows-8-review,3334-4.html
Here's an update, I managed to make some progress (I was getting error code 28) and found this at stackoverflow:
"If the device is listed in Device Manager as Other devices -> Android but reports an error code 28:
Google USB Driver didn't work for me. You could try your corresponding OEM USB Drivers, but in my case my device is not listed there.
So, install the latest Samsung drivers: SAMSUNG USB Driver v1.5.33.0
Restart the computer (very important)
Go to Device Manager, find the Android device, and select Update Driver Software.
Select Browse my computer for driver software
Select Let me pick from a list of device drivers on my computer
Select ADB Interface from the list
Select SAMSUNG Android ADB Interface (this is a signed driver). If you get a warning, select Yes to continue.
Done!"
Now I can use adb for debugging but still can't access my device folders (Internal and External SD Cards), maybe I need to change something on my phone configuration (It is already allowing USB debugging)
I'm so ashamed now ... I didn't knew how to activate mass storage.
Thanks for the help!
@wantowan2. Love this ROM and kernel. Was wondering if you could add virtualcdrom support via a few commits please.
https://github.com/CyanogenMod/andr...mmit/979aa0d835ddca5fdbaab47bcd9aa7f7d359feb0
https://github.com/CyanogenMod/andr...mmit/1736943179733a4629e0eaa773848bdeeaeefec1
HDMI tvout issue
My HDMI tvout does not work via MHL for this ROM.
Could somebody check HDMI tvout via MHL for this ROM?
Hi,
I am trying to recover some videos from a S3 neo (Kitkat 4.4.2), but the problem is that none of the software I tried recognize it. I think the problem is the lack of "usb mass storage" ode (or in the other words having only MTP ot PTP modes) which results in the phone being recognized exactly as a phone by windows, and not as a simple usb storage device (I mean like a flash drive). Enabling "usb debugging" option did not solve any problem. I'm really frustrated; please help!
Thanks in advance.
MN
XDA Visitor said:
Hi,
I am trying to recover some videos from a S3 neo (Kitkat 4.4.2), but the problem is that none of the software I tried recognize it. I think the problem is the lack of "usb mass storage" ode (or in the other words having only MTP ot PTP modes) which results in the phone being recognized exactly as a phone by windows, and not as a simple usb storage device (I mean like a flash drive). Enabling "usb debugging" option did not solve any problem. I'm really frustrated; please help!
Thanks in advance.
MN
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-s3-neo
After creating your account, please ask your question here:
http://forum.xda-developers.com/galaxy-s3-neo/help
The experts for your device are located there and will be able to help.
Good luck!
Hi
Can anyone please enlighten me on how to fix my Garmin 660 GPS
My issue started when I plugged the unit into the computer to perform a routine map update
I had been having some issues with a few of the media files that I play so I thought I would replace the MP3 files on the MicroSD card only this this I left it in the unit
I usually format the card and install new files separately from the unit but I formatted the card yet by some magical god like intervention the internal storage was also wiped.
I would suspect that Garmin would not make it this easy to delete important files as now the unit is not detected by any computer. The unit has deleted the maps.
It just starts and restarts over and over - I finally managed to get a hard reset to actually do something at all. Now and then it will bring up the software (no maps)and will Bluetooth but a hard reset every time to make this happen and does not always work - basically it a useless device.
None of the Garmin programs can see the GPS - I have backup of the device but no help - I have the factory software no help, the factory reset - partial but does not load the drivers - tried many Gamin driver update - took it back to supplier (GPS specialist) they said have to send to Garnin
I ride a bike and it is hard without the GPS to find my way around plus it include music and my phone plus it cost over $600
surely it is possible to access the root directory and replace what ever files it needs
My question is
How can I get the device to open a port to access the internal storage and load what ? to get the USB port functioning when it plugged into the computer.
I have basic computer knowledge - If anyone knows how to fix this issue please be kind enough to explain the method in easy to follow instructions and exactly what file or files I need and where I can obtain them and how to install them,
Can the port be forced to open -I tried a couple of methods from the net but didn't work for me
Please help if you can
Many thanks for reading and all suggestions would be much appreciated
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
I installed Carbon-cr-5.1-moo-release-bacon-20180202-1444.
I am unable to get usb connection working and having tried many different things...
-I have latest Android Studio installed and Android Debug Bridge version 1.0.41.
-In Android Studio SDK Tools I have installed Google USB Driver v12.
-I have developer options turned on and Android Debugging turned on.
-When I plug in OnePlous One I get no mobile notifications and nothing in Win 10 Pro.
- when I go into developer options and hit 'select usb configuration' my selection of mtp or whatever is always ignored and charging selectiomn remains
-Device Manager / Portable or Other devices does not have the phone beneathn it.
-When I run adb devices in cmd there are no devices attached.
-I cannot find a OnePlus One adb usb driver. I thought I found one but I have no way to verify and after installing it made no difference
I want to update to the latest rom in case this may be the cause, but after I download it to the phone and click flash
I just get the oneplus icon forever and the recover app twrp does not come up. It used to be there but then after I installed
the first rom after a couple of uses it disappeared for some reason or at least will not boot to it.
When I installed that first custom rom I folowed instructions for rooting and on completion it says to open up the installed
su app but when you open it it says there is a more up to date version but when you try to install that it fails.
Now all the apps that will not run if your app is rooted say it is rooted and all the apps that will not run unless it is rooted
say it is not rooted.
I think I need connection via usb in order to reinstall the twrp recovery app in order to install an up to date rom, hoping this may help
me solve the usb issue, but I cannot get the usb connection working as described above,
any hehlop would be appreciated.
@hardya THREAD CLOSED as a subject matter related thread (also created by you) already exists, to which your above post has been copied:
https://forum.xda-developers.com/oneplus-one/help/connecting-oneplus-one-to-adb-t4082025
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Hi XDAers ... I have a challenge.
Huawei mate 20X fell.
Screen broke, as in black.
Phone turns on and can get into recovery, but nothing more.
Unsure if it is sitting and waiting for my unlock code (tried it on the black screen a few times wout success), or what it's doing.
The output over hdmi is also black (but this is most likely due to not being able to select the correct mode when usb connected.
Does anyone here have any ideas on how I can extract the data (internal - no sd card) from the phone ?
My computer recognizes a usb connection, HiSuite also recognized a Huawei connection, but says the device not connected.
RPi also sees a usb device, but nothing can be mounted (suspect again need to allow this on the phone screen).
Any ideas ?
Thx
Iyah.
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com