I rooted My phone, OPO, on CM11S, installed TWRP, flashed SuperSU,, and unchecked CM recovery. Everything seemed working fine. Yesterday I installed the just released OTA, I lost root access. I then re-flashed it with SuperSU, gained root access again. However, I am having problems with fastboot. Problem 1, phone won't boot into fastboot mode when I pressed both power and volumn up buttons. Problem 2, adb command "reboot bootloade" will only reboot the phone and fails to put it into fastboot mode. Problem 3, The only ways I can boot the phone into fastboot mode are either via the option in the power menu or via TWRP. Either way, even the phone showed it was in the fastboot mode, it still refused to take the fastboot command. The system responded with "no permission fastboot" instead. How can it be fixed or restored? Thanks for help in advance.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
Thread closed since a duplicate topic with a registered user can be found here.
Related
Okay, first of all I know, I'm a total noob. I have followed these forums a long time and have successfully rooted a few phones. One of which was my nexus s 4g. I was trying to unroot the phone so I could get ics. This is when I ran into problems and right now I just want to be able to get my phone working again. Right now I am stuck on the Miui boot up screen and no matter how long I wait it stays on that screen. If I do a battery pull and hold down power and vol up I can get into the bootloader screen with the information as follows: fastboot mode, product name-Herring, HW Version Rev 34, Bootloader version-D720SPAKE1, Baseband version-D720SPAKE1, Carrier info, SPR, serial number-37308B81276A00EC, Lock State-locked. Then the different options I can choose are reboot bootloader, reboot, recovery, power off. If I choose reboot, it takes me back to the mius screen and stays there. If I choose recovery, I get the triangle with the exclamation point. I then hold power and up volume again and I get a screen that says Android system recovery <3e> with reboot system now, apply update from sd card wipe data/factory reset and wipe cache partition. I have tried all of these as well with no luck. When I go to apply update from sd card I get matrix-cfs_v15.5 zip, root.zip, update.zip and then what looks like apps such as Alarms/, Android/,MIUI?, etc. If I try to select any of the first ones such as matrix-cfs_v15.5 zip, I get Install /sdcard... , finding update package..., opening update package..., verifying update package..., E.signature verification failed, Installation aborted. Then it gives me the system recovery options again. Any help would be appreciated.
Did you try ADB fastboot method?
Not sure how to try that
I tried doing the adb, followed all directions and installed and when I go to the command prompt and type in anything, such as, adb reboot bootloader I get, adb is not recognized as an internal or external command, operable program or batch file.
ok I got that working now but when I type adb devices and press enter I get a message saying List of devices attached and then it doesn't show anything and I get the command prompt again saying:c:\android\android-sdk\platform-tools>
also since the phone is stuck in either the miui screen or bootloader I can't get into it to put it in usb debugging mode. I am trying on my own to get this going and am stuck any and all help would be very much appreciated.
TerryUK98 said:
Lock State-locked.
Click to expand...
Click to collapse
I think that means you have a locked bootloader.
And from what you're telling, I believe you have stock recovery.
Also, when you're in fastboot mode, I don't think adb commands apply. Use fastboot commands instead (i.e. fastboot devices).
Search for guides showing you how to install and use fastboot.
I did fastboot as well and the problem I think I am having is it's not recognizing my phone because usb debugging wasn't turned on before it locked up. How would I get it to recognize my phone or download an img to my phone if it is not being recognized. Sorry if this is a stupid question.
You don't need usb debugging in fastboot mode.
You either:
1. Don't have drivers installed.
2. Don't have fastboot installed correctly.
You really need to read a guide or two, through and thoroughly.
Bc it sounds like you have no clues.
Yeah dude. Take a step back and go over what you have installed and where you installed it.Yes, fastboot commands start with fastboot instead of adb. And you're on stock recovery.
Thanks for the answer that I don't need usb debugging in fastboot mode, I wasn't sure of that. I have downloaded and installed my drivers multiple times and when I use the device manager to update drivers it says I have the latest drivers installed already. Whenever I do fastboot commands I will type in fastboot devices and shouldn't my device serial number come up? It just gives me the line c:\android\android-sdk\platform-tools>
And is waiting on me to type a command in. And yes I have been looking at guides all night. I appreciate any help you guys might have and remember we were all noobs at one time.
The zip in this tutorial should help.
It has adb, fastboot, and the drivers needed.
And unlock the bootloader because it is locked.
Finally got it, I had everything downloaded that I needed already, but looking at different forums, etc, it seemed like everyone named it something different. So I just used the one link you gave me and did it exactly the same way and it worked. Thanks so much! and again thanks for your patience.
Hey all,
I have a big problem with my TF700.
I wanted to root my device after unlocking the bootloader through the app, but by being dumb I managed to delete the OS in TWRP (thought it was factory reset) and now I'm in big trouble.
The only thing the tablet loads now is the TWRP 2.2.1 recovery. (TWRP came with a root-package, I didn't install it myself.)
Since I can't load an OS that is apparently deleted, I'm stuck with using the (latest) SDK to get the stock rom back on the tablet.
The problem is, it doesn't work, at all. The device is recognised by my (Win7) PC and the 'adb devices' command gives me the ID and 'recovery'.
If I try to push the ROM to the Sdcard folder (or any folder, for that matter) It gives me a "protocol error" with no other explanation.
If I try to sideload it it is stuck on "Waiting for device".
I tried the 'shell' command, just to see what that does, but it also gives me an error.
Other commands can also give the the "error: closed" message.
Since both of those commands don't work, I can't get anything on this tablet, since I can't get this version of TWRP to mount an external (micro) SDcard, the option simply isn't there.
Can anyone help me with this, of has my tablet been reduced to an expensive paperweight?
That's the problem with packages - you don't really know what's in it...
What root package did you use?
You have a very outdated recovery installed. I'm guessing here, since you didn't post your bootloader version and that's the first thing we need to know!
Can you still get into the bootloader?
Boot with Power and Volume Down buttons until you see the tiny script and post your bootloader version. Should be something like 10.6.1.....
Do NOT do anything else in recovery at this point!!!! If it is incompatible with your bootloader you could hard brick!
Once we know if you have fastboot access and what your bootloader version is, we can help you to flash the correct recovery in fastboot. With that installed it's a piece of cake to get you up and running.
But be patient! Don't do anything else you're not quite sure of!
*Update Below*
I believe the culprit was the 'Install recovery' method "Scott's Recovery install tool"
I tried a few but most didn't do anything. Every tool I tried comes from the xda forums and checked youtube videos explaining the steps.
If I boot using Volume down + power, nothing extra happens. I just see in the left hand corner "this device is unlocked", since I unlocked the bootloader using the ASUS app.
If I use the command adb reboot bootloader, it goes to TWRP 2.2.1.
Does this imply that I also deleted the bootloader?
Update: I deleted all drivers and software regarding the tablet from my PC and I installed the adb setup package from these forums and reinstalled the (universal?) driver package. This turned out to be a newer version of adb, and I actually managed to push a file to the tablet with no problems. I am reluctant to try anything else at the moment, since this whole ordeal had given me quite the scare (and the desire to learn more about this all)
Can anyone help me revive my tablet?
FooYoungHi said:
*Update Below*
I believe the culprit was the 'Install recovery' method "Scott's Recovery install tool"
I tried a few but most didn't do anything. Every tool I tried comes from the xda forums and checked youtube videos explaining the steps.
If I boot using Volume down + power, nothing extra happens. I just see in the left hand corner "this device is unlocked", since I unlocked the bootloader using the ASUS app.
If I use the command adb reboot bootloader, it goes to TWRP 2.2.1.
Does this imply that I also deleted the bootloader?
Update: I deleted all drivers and software regarding the tablet from my PC and I installed the adb setup package from these forums and reinstalled the (universal?) driver package. This turned out to be a newer version of adb, and I actually managed to push a file to the tablet with no problems. I am reluctant to try anything else at the moment, since this whole ordeal had given me quite the scare (and the desire to learn more about this all)
Can anyone help me revive my tablet?
Click to expand...
Click to collapse
Ok, good - you got adb working. The adb command to boot into the bootloader is
Code:
adb reboot-bootloader
Note the hyphen
Also I wonder if you pushed Power and Volume Down long enough. You should feel the tablet vibrate twice, then see some tiny script and 3 icons appear. That would be the bootloader menu and in it, you are in fastboot mode by default.
The next step would be to check if you have a fastboot connection.
The command for that is
Code:
fastboot devices
Read my guide on flashing a custom recovery and rom very carefully and follow the steps outlined to get TWRP 2.8.0.1 on your tablet.
Ask any questions you may have in that thread.
http://forum.xda-developers.com/showthread.php?t=2688891
Edit: Sorry, forgot that we have to determine your bootloader version first. So use the button combination or the adb command to boot into it and post it. Don't worry. I don't think you did anything to the bootloader - it's not that easy to mess it up...
Unfortunately, the adb code doesn't work, with or without the hyphen. The device will reboot, but will return to TWRP.
I've held down the Volume down+power button for more than a minute witout result. The device will just reboot after a while for as long as I'm holding it. I do see the screen flicker for a second.
I've also noticed, that after I push a file to the tablet, that after a reboot it loses the data I just moved.
After booting TWRP, when I look in the command line of TWRP, it tells me that it can't mount the 'system' , 'data' and 'cache' forders. (tw_mount)
And it specifically mentions (multiple times) that the /data folder failed to mount, giving the message "No such file or directory"
It seems I really managed to F'ed it up good...
My "force-boot-to-bootloader" kernel module might help you unbrick. Read this guide very carefully before you do anything:
http://forum.xda-developers.com/transformer-tf700/help/guide-t2853546
You people are my new heroes!
The last guide did the trick. The stock firmware is installed and I'm currently updating and installing all the apps.
Thank you all só much, you really saved me a ton of frustration.
Hi everyone, I am looking for some help and I will try to be specific. I am trying to root my Xperia M2 (I have unlocked the bootloader).
-USB debugging is ON.
I am trying to boot into my bootloader, flash TWRP, boot into TWRP, install SuperSu.
I am stuck in the step of booting into my bootloader using ADB. I have tried the simple method of running a CMD and using the "adb reboot bootloader" command. CMD responds with "no devices/emulators found".
I tried the "adb reboot bootloader" command while my phone is on fastboot mode and while it's turned on. None seem to work.
What I am expecting is my phone to boot in a screen showing the android logo. Am I wrong?
Other commands I've tried and the response I got:
Adb devices --> List of devices: empty
fastboot devices --> my model and the word "fastboot"
Before you comment "install drivers", please note that I am aware of this, I have searched the web for drivers and I am pretty sure I have the drivers. If you are familiar with the process of installing the drivers please post the way of installing them, because i might have done something wrong..
I believe that what i am doing wrong is having the phone in the wrong state.. I might be executing a command with my phone turned on, while it needs to be off, so if you could clarify the phone's state in every step, that would be great
I apologize if I forgot crucial details, I am a newbie. Thanks in advance, i will make sure to answer every question and provide info needed.
reboot as boot loader
You already have TWRP means 1st go to recovery mod use switch of mobile and on it Press v- button after vibrate and untile come sony big logo you get recovery mod then there is option reboot in to boot loader ... please check
Scrap everything and follow http://forum.xda-developers.com/xperia-m2/general/unlocked-bl-root-sony-xperia-m2-android-t3214498
I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.
mattlokk said:
I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.
Click to expand...
Click to collapse
Did you set:
Allow oem unlock in dev opt.
Fastboot protocol into BL?
Twrp app & manager need root to work.
Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link
thanks for the help, i'll try and work through this soon.
fpozar said:
Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link
Click to expand...
Click to collapse
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.
mattlokk said:
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.
Click to expand...
Click to collapse
Okay so I'm guessing you have stock ROM.
To flash TWRP you have to enter fastboot mode (vol down + power I believe) and flash the twrp image with fastboot flash recovery twrp.img (rename the shield tablet twrp to just twrp.img and place it into your easy adb and fastboot folder)
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck
fpozar said:
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck
Click to expand...
Click to collapse
Agreed. This is probably what is happening (as described on the TWRP webpage here:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Alternately, immediately rooting (flash SuperSU or Magisk) right after flashing TWRP, will prevent TWRP from being replaced with stock recovery.
Although the inconsistent fastboot connection, and how much trouble you had flashing TWRP initially, is a bit worrisome. Try using a different cable (maybe the one you are using is not connecting well?) try another USB port on the computer, and don't use a USB hub (connect direct to the PC).
Well, like they say: persistence is key. I kept pushing and trying new things until eventually.... I bricked the device. No, not really, it's working great now on LineageOS.
Thanks again to everyone who helped me out :good:. I'm still not sure exactly what caused TWRP to stop working on my device, however following this guide helped me fix it: https://forum.xda-developers.com/shield-tablet/help/help-stuck-nvidia-boot-screen-t3076462
The "flash-all.bat" restored everything to stock (including the recovery mode) and after that I was able to flash the latest TWRP and install Lineage.
Hello everyone. I unlock bootloader without any problem. Gotback to normal phone interface to enable again USB debugging and advanced reboot. Then I reboot to fastboot again to install the TWRP recovery. I typed fastboot boot imagefilename.img without any errors and im here waiting like 1 hour in fastboot mode image to go into twrp recovery. Just to mention that I can turn off the phone and go back to normal interface fine if I long press + - and the power button. It seems like everything im doing is fine but im just waiting to actually go to recovery. Sorry for the English mistakes. Couldnt find anything to other threads similar to my problem. Thanks in advance
Edit: I checked if im using the right twrp file multiple times.