Two days ago i began to look after advantages and disadvantages of rooting a device, and i thought that rooting my phone would be helpfull. I rooted my phone succefully using vroot and i had not any issue after rooting. After installing Chainfire 3d which is only for android 2.3(according to my actual knowledge), when i installed the driver asked by this program the phone rebooted and get stucked at the vendor logo and nothing happens after the logo appears on the screen. My phone model is ALLview A5 Smiley. I do not have any backup at my disposition but i can access Recovery mode(vol up + power on). Please tell me how to fix this
Related
Hi all,
My zte v987 is rooted and got stuck on zte logo boot.
Before it got stuck i was playing around with an app called "freedom" that hacks in app purchases. I went into settings and turned on the "freecore" it rebooted itself after and got stuck on zte logo forever. I am able to go into recovery mode but i dont have custom recovery installed i also dont have a backup of my stock rom or any kind of backup. I am clueless about flashing so i will really need a step by step instruction. I also tried resseting my phone back to factory settings but nothing happened. I also read some threads about flashing recovery using adb and fastboot but since im a noob on android i turned off usb debugging mode(I dont know if its needed) before this all happened and i dont know what to do now. I need help
Thanks in advance
I rooted my xolo a500s ips with framaroot (debugging mode off) after rooting it i installed chainfire3D after installing it this made my phone stuck on its logo screen and now im not able to acces my device with no CWM installed in it.
I am very much worried about how to recover phone in its original state if anyone could help me out pls i would be very much thankful to you
Please help me my tablet has been in a boot loop, I accidentally installed chainfire3d then mu device rebooted and there it is stocked on the "ANDROID" logo, I tried factory resetting ( power+volume key). I don't have the firmware of my device I tried searching it but I have no luck in doing so, is there any solution for this? I also don't know how to flash my device. I can go to the service center because it is to far away and besides my tablet is already rooted which voided its warranty, Please help me with this thank you in advance.:angel:
Is the device running Android 4.2x? If yes, then you must be aware that CF3D is not working on Android 4.2x. That happened to me when I did it on my CM Life.. Try searching the net about how to remove cf3d using adb
hey guys! I really need help. Actually i have a LG L70 D325 phone and i rooted it few days ago. After that, i installed CMW recovery and i also instaled ROM Manager. I used ROM Manager to install CyanogenMod 12.1 and after that, i installed GApps. As I didnt like the CyanogenMod 12.1 apps, i installed "Cleanser Mod 2.0" . I ran this with ROM Manager and i removed all app in cyanogenMod 12.1. (well, there was a list and i just selected everything. After that, i reboot it and it got stuck on" Android is starting.. starting apps".. its not starting. I want to boot on CWM recovery again but its not working ! I read about volume keys and power button (I tried everything !!), but its not going on CWM recovery !!!. It just boot the "LG logo" again and again till i let go and it continues showing the cyanogen logo and eventually gets stuck on "Android is starting.. ".. i tried connecting it to pc by USB but my pc is not recognising cause the phone is switched off i guess !
Please help me ! I really need my mobile phone !!!
Hi there,
Please make sure you can access Download Mode by turning off your phone, then hold Volume Up and plugging in your USB cable.
After that please read carefully this tutorial and see if you can flash stock firmware thru that tool.
[TUTORIAL] How to flash LG phones with LG Flash Tool 2014
Good luck
Additional info: [Q] How to recover LG l70 D320N?
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal