[Q] Phone stuck on menu - Sprint Galaxy S 5 Q&A, Help & Troubleshooting

I recently tried downgrading form 4.4.4 to 4.4.2. Everything apparently worked well with Odin, as I got the pass. I also downloaded the firmware that matches my phone. Is there a way to fix this without resetting the entire thing? Yes, I did back everything important up. Thank you!

Related

[Completed] Formatting Samsung S3 Problem

Hey, so basically I'm in a situation where I have no idea what to do.
I recently just got a new phone, and am going to give my Samsung Galaxy S3, SGH-T999V model - from Wind Mobile to my Dad. Basically, when I first got the phone - a couple months after, I decided to try Rooting it, and I did, successfully. Since I didn't really know what to do with my rooted phone, I decided to unroot it - then tried rooting it again some months later, but it didn't work successfully. Basically my phone wasn't rooted, but I had the "Team-Win" recovery on it.
I wanted to bring my phone back to it's original state - and have the stock recovery on it. After some Googling, my solution seemed to be to flash the stock rom for the SGH-T999V model onto my phone using Odin. And I did that - and it worked successfully. But I still couldn't check for OTA updates or anything, it said my phone had still been modified in an unauthorized way.
Now that I need to give the phone to my Dad, I have to format the device and erase everything. This is where my problem starts. When I try to format it (using the Stock recovery), I see a bunch of error messages, with the Android logo falling down in a kind of dead way. I reboot my device, and nothing changes.
It still has all my data, and everything on it.
Sorry if this is the wrong area to post this (I'm relatively new to the forum), and if my problem doesn't make much sense - I've tried being as detailed as possible. Could anyone help?
Hi, thank you for using XDA Assist. Flashing the stock firmware should show you to get ota's. This should have everything you need,http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125. Also, you can ask further questions here,http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
Thread closed

Unable to Install 5.1.1 OTA Update for Verizon SM-P905V

I was able to install the first of the two updates earlier for the 5.1.1 update on my Verizon Galaxy Note Pro 12.2. The second downloads, prompts for install, reboots and begins installing but errors out and reboots back into the OS home screen. The Verizon software update manager shows Failed software update error code 402. I have factory reset my tablet a couple of times and still same issue. I do not have my tablet rooted and no apps disabled.
I downloaded the latest available Samsung firmware md5 file, version VZW-P905VVRUANK1-20141205133604 and tried flashing using Odin 3.07 while in download mode. It starts and after a few seconds, Odin fails and on the tablet screen, I get the error, SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I have re-downloaded the firmware along with older versions and still same issue.
I was reading somewhere that my tablet could be "soft bricked" and that is why it will not install the second part of the OTA. As for the Odin/download mode error, I had read that the firmware version I am trying to flash in Odin has an older version of bootloader than my current and Samsung does not let you downgrade the bootloader. I may be wrong on both accounts, which is why I am seeing if anyone else has had this same issue or have any advice on what I can try.
Thanks in advance!
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
dansto82 said:
Same here. I unforze all the apps unintstalled SU and factory reset still no dice. VZW repair assistant wont work or smart switch. RA says device firmware not supported and smart switch says im up to date. The first part of the update installed no problem.
Click to expand...
Click to collapse
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
tdetroit said:
I had the exact same issues. Here's what I did with my 4.4.2 Rooted NP. I wiped it completely from within the device, then connected it and to the VZW software and let it do a "Repair". After that, my tablet also said that it was up to date, still on 4.4.2. I let it sit overnight and tried downloading the software update the next morning from the tablet, and it took both of them. My NP is rocking 5.1.1. now, much faster. No root but that's alright for now. By running the repair assistant from VZW, it also got rid of the Unlocked Symbol, which may have prevented the upgrade in the first place.
Click to expand...
Click to collapse
I was able to get mine to update using ODIN and the firmware file from sammoble. Factory reset on the tablet, factory reset in recovery and finally ODIN worked.
I was having the same problems as the OP listed. Once I decided to live without root and I would be okay with wiping the tablet, I performed exactly what dansto82 said he did and I'm now on 5.1.1.
Now hoping someone comes up with a way to root.
Hey, I have the p905v and it is running 4.4.4, I rooted it with towelroot and it was completely fine. I then tried putting twrp recovery on it the wrong way through flashify and now I don't have a recovery mode and can't update it to 5.1.1. Other than that the tablet runs perfectly fine. Is there a way I can fix it?
Sent from my SM-P905V using XDA Free mobile app

I Think I'm Screwed!

First; I hate to be a double poster, but I'm on the back page of How to Upgrade to 5.0.1 and Keep Root. My apologies. I've spent several days trying to solve this and have no answers.
I did the 5.0.1 "Keep Root" when it first came out, but it acted buggy and unpredictable. I just got a Note 4, and hate that I can't root it, so I decided to try to resolve the problems with my S4. I re-did the process, as stated and it seemed to work fine. I downgraded, rooted, and upgraded to 5.0.1. Then the trouble started. I installed the "Stock" Kernel, Modem, and Recovery. When I rebooted; it gave me a nasty message like: "AT&T has discovered unauthorized software on your phone." and froze up. I booted back into download mode, re-flashed the NB1 file, and it seemed to work, except for no Wi-Fi. When I tried to re-flash the OC4 with Flashfire, it acted like it was going to do it, but only booted into the recovery screen. I've tried close to a hundred different combinations, but no joy.
It allows me to root the NB1 and install Flashfire, but cant get it above 4.3. I installed a terminal emulator APK file and checked my bootloader status and it shows OC4. If my understanding is correct; I'm screwed. Is there any way to get past this and upgrade to ANY working ROM that will allow Wi-Fi and be fairly stable?
BTW; I'm on AT&T.
Thanks in advance!
As far as I'm concerned, ODIN just puts back your phone to its original state. Have you tried following the guide on how to install a custom Lollipop ROM? You gotta flash a rootable NB1 firmware and then continue with the process explained in the thread.
Here, take a look and tell me how it goes http://forum.xda-developers.com/galaxy-s4-att/general/how-to-installed-custom-lollipop-rom-t3135396
Crash and Burn
Crash and burn. NB1 wouldn't think of loading with Odin. Fails almost immediately.
Thanks for the help, though. Any other ideas?
Here's a screenshot of my phone parameters.
http://dl-1.va.us.xda-developers.co....png?key=Hy1bNEcEPo2F55Cm_pjqYg&ts=1450058617
Guess it won't upload my photo...

Phone no longer updates?

Hey all, need some advice... I recently rooted my phone and found it wasn't for me (way too many apps stopped working). Because of this I tried to unroot the phone, but got stuck in a boot loop and had to recover from scratch.
Anyways, I'm running stock now and the system is back to being rooted. Problem is, I can't seem to update the phone. I'm not getting an error message either. Both Smart Switch and the phone simply say I'm up to date, but I'm on APB7 when I should be able to get APD3.
Is there anyway to fix this? Will I need to factory reset the phone? I'm not sure how to get the phone to recognize an update now.
Same here. I rooted my phone, installed TWRP but battery drain and apps not working properly made me go back to stock. Now I cant get any updates. I flashed APEQ fw yesterday dated June 8 but still dont get the June 17 updates.
I used Smart Switch to do an Emergency Reinstall of the firmware. Had to start over from scratch with my phone... It installed the lastest firmware though.
Been researching as much as I can online and it seems the consensus is simply unrooting the phone does nothing. You have to factory reboot. Tripping Knox won't stop you from getting updates but an unrooted phone that wasn't factory reset still won't get updates. Fun times. Last time I root my phone... Things aren't the same since I last rooted in Android 4.0. Now too many apps and updates etc. check for root and stop working if they detect it.
Luuthian said:
Hey all, need some advice... I recently rooted my phone and found it wasn't for me (way too many apps stopped working). Because of this I tried to unroot the phone, but got stuck in a boot loop and had to recover from scratch.
Anyways, I'm running stock now and the system is back to being rooted. Problem is, I can't seem to update the phone. I'm not getting an error message either. Both Smart Switch and the phone simply say I'm up to date, but I'm on APB7 when I should be able to get APD3.
Is there anyway to fix this? Will I need to factory reset the phone? I'm not sure how to get the phone to recognize an update now.
Click to expand...
Click to collapse
Did you use Odin to flash back to stock?
malek777 said:
Did you use Odin to flash back to stock?
Click to expand...
Click to collapse
I used the Emergency Recovery function of Smart Switch which, from my understanding, is basically the same thing. I know how to use ODIN but it seemed a better idea to go with the official solution. Guess I'll find out if it worked once the June update is available in Canada.

Note 4 Dreadful unusable performance!

Hi Guys,
Hopefully this is in the right section
I have a Note 4 SM-N910G and its just turned absolutely useless since I factory flashed it. I have rooted it before and bricked it and un bricked it before so have some experience with it. I recently wiped my phone and did a firmware restore using Samsung Kies and since I did the phone is absolutely useless. It started out fine for an hour or two and now it lags by like a minute with any action, even trying to bring up the keyboard when typing. It will reset itself, lock itself, crash, just un useable. I've tried reflashing it again stock a couple times and still the same everytime. It went from perfectly fine to dreadful with the original mentioned restore. I did just recently get an error code of "sbl1 partition doesn't exist" in Boot recovery mode.
Does anyone know if this is fixable and not a hardware issue?
Should I try and just root it again and flash a non-oem rom? (I havent had the time to do it recently)
many thanks,
Tekkado
Hi Guys,
Also I should add that when I was rooted the phone was fine but when i went to unroot through super user the phone was still functioning as though rooted and I couldnt download software updates because my device was "modified".
So thats when i just flashed stock firmware and again now flashing through odin aswell it proceeds fine then the device will say installing updates and then give a no command error or seandroid not enforced. Everytime is basically a different message.
How can I just wipe everything and get back to stock?
Thanks
So to add to this is there any relationship between the firmware running and the bootloader? I just realised that before i tried to flash stock firmware i was rooted and didnt un root via superuser because in the past that did jack all.
I flashed dr. ketan rom this morning and the phone was operating as normal very snappy but as soon as i downloaded a new app from the play store (reddit and chrome) again it turned to absolute crap.
Is there a disconnect here that i missing that can be fixed?
Thanks

Categories

Resources