Taiwan D838 have release official Lollipop!!
Here is the Taiwan official D838 version for 32GB
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW1CJE6F220CABE04FF8V5D/D83820c_00.kdz
And this is Taiwan official D838 version for 16GB
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW1CAXRF22ZFA45BBFF8352/D83820c_00.kdz
Guide to flash KDZ file: http://www.lg-phones.org/how-to-flash-unbrick-lg-g-pro-2-with-a-kdz-firmware.html
Some issue they say fixed from the post in Chinese BBS forum is Edge issue fixed (previously only have gprs connection, no edge)
If you want to have root on Lollipop, you need to flash this zip file from custom recovery, follow the steps as below
http://lgviet.com/forum/threads/rom-d83820c_twn_pure-16gb-32gb-confirm.37488/
If you are on non rooted Lollipop and you want root, either wait for someone to find a way for it or flash back to KitKat then use custom recovery to flash the above zip file.
You can use above steps steps for flashing KDZ file or you can use below steps and file to flash using tot & DLL file
Flash using tot & DLL file http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
To get the KitKat 4.4 KDZ file, paste this into your web browser http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxx
Replace xxx = your imei number, to get the correct version for your phone.
D838 32GB KitKat 4.4 v10D tot file https://mega.co.nz/#!OsFihIgT!2h-MIGlZ2vvm9_Nmbcj_15IsXNDSi50nf_sMCVp-Stc
D838 32GB DLL file https://mega.co.nz/#!zddFnRTI!5IMgudZ4OEIT9b0y9Y4eQA-6rWOxxKL7xTzOFUWHD30
Please hit thanks if I helped you.
That's great. Have you tried on your device? Mine is D838 but it's Vietnam version.
Hattori Suzuki said:
That's great. Have you tried on your device? Mine is D838 but it's Vietnam version.
Click to expand...
Click to collapse
Now downloading the file.
But I have a concern about how to root when updated it to Lollipop
Thanks for sharing
Can this be flashed to D838 SEA version phone?
mawks said:
Can this be flashed to D838 SEA version phone?
Click to expand...
Click to collapse
+1. want to know the same thing.
mawks said:
Can this be flashed to D838 SEA version phone?
Click to expand...
Click to collapse
h8Aramex said:
+1. want to know the same thing.
Click to expand...
Click to collapse
Should be able to flash. But if cannot then you can flash TW 4.4.2 tot file first, then flash this 5.0.1 file.
Link to 32GB TW tot & DLL file:
http://forum.xda-developers.com/showpost.php?p=58665507&postcount=10
Only issue now would be how to restore backup data after flash to Lollipop, and also how to root it.
It seems both 16GB and 32GB of Taiwan versions are same.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The rooted version can be found here:
http://lgviet.com/forum/threads/rom-d83820c_twn_pure.37488/
Hattori Suzuki said:
It seems both 16GB and 32GB of Taiwan versions are same.
The rooted version can be found here:
http://lgviet.com/forum/threads/rom-d83820c_twn_pure.37488/
Click to expand...
Click to collapse
That is a good news! Downloading now to try it.
xb360 said:
That is a good news! Downloading now to try it.
Click to expand...
Click to collapse
It works fine on my device - D838-ESA. Now we are waiting for the recovery
mine is d83810f ESA version, not sure if i CAN flash this one or wait for OTA
Hi guys, I have D83810b-HKG-xx how much i have to wait for ota update?
Don't know, SEA version is also update-less for now.
We also only had the "10b" version of the firmware.
No c, d, e, f, whatever. Just "b".
Weird, how LG manages updates.
(I really hope they will be more transparent in the future. Like post changelogs, information about what changed, and push out updates all at once, for unlocked phones.)
Hashary8979 said:
mine is d83810f ESA version, not sure if i CAN flash this one or wait for OTA
Click to expand...
Click to collapse
Any D838 version can flash with this ROM
My D838 was originally 10f TWN then I flashed 10b HKG then I flashed 20c TWN with no problems except no 4G/LTE
Hashary8979 said:
mine is d83810f ESA version, not sure if i CAN flash this one or wait for OTA
Click to expand...
Click to collapse
You may try if you would like. It should work fine.
xb360 said:
Any D838 version can flash with this ROM
Click to expand...
Click to collapse
Mine is D838-ESA, and it works well.
Has anyone tried rooted version from Vietnamese site?
I did and it works fine then.
After factory reset and a day of usage on stock TWN D83820c Lollipop on my SEA D838 32GB, I don't find ithe current version of Lollipop is that smooth on Pro 2 thou...
Kind of disappointed at the moment...
Thank you guys for your prompt response. Maybe I could try it out.
Is there any other server for download since this baidu is very slow. It will take me days to download?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the OTA Kitkat 4.4.2 Brazil XT1033 Dual Sim update
Download:
www.mediafire.com/download/qkou2mh3ddftacp/Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR.zip
Quote:
not work witch cwm or other custom recovery, if tried not working, need stock recovery, and stock rom us.
share it if you find the solution.
Note: Dont worry if dont see icon H+ when you flashes Stock Rom BR, I Test Velocity, is HSPA +. You can see the screenshot int attached.
1.- For Install just flash stock rom IMPORTANT Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR LINK
2.- Copy the OTA KITKAT 4.4.2 to sdcard or use adb sideload
3.- Apply update from sdcard
4.- Enjoy
Root Working method:
http://forum.xda-developers.com/showthread.php?t=2584210
Creditis OTA Rom: fabiobatera
I was trying to extract the update to share. thank you so much!
what command you used to extract the file?
OTA rom On-line
Hug.
Can I use this on the stock XT1033 Asia ROM?
I need the 4.3 stock kernel... Can someone upload?
r3flux said:
Can I use this on the stock XT1033 Asia ROM?
Click to expand...
Click to collapse
Not only with the firmware Brazil.
Hug.
mascote9rc said:
I was trying to extract the update to share. thank you so much!
what command you used to extract the file?
Click to expand...
Click to collapse
Past cache using the root explorer.
brenopapito said:
I need the 4.3 stock kernel... Can someone upload?
Click to expand...
Click to collapse
Reinstall the firmware 4.3 Brazil
Hug.
fabiobatera said:
Reinstall the firmware 4.3 Brazil
Hug.
Click to expand...
Click to collapse
But I just need the Kernel.
I received the update via OTA, but I use a custom kernel and my device get bootloop when I try to update.
brenopapito said:
But I just need the Kernel.
I received the update via OTA, but I use a custom kernel and my device get bootloop when I try to update.
Click to expand...
Click to collapse
'll level up the kernel to kernel friend
Hug.
Link Kernel 4.3
Extracting the OTA upate file
Hello !
Can anyone guide me as to how do I get the OTA update file when I get an update on my phone.
Thanks:good:
r3flux said:
Can I use this on the stock XT1033 Asia ROM?
Click to expand...
Click to collapse
My Australian-bought XT1033 (dual sim) got Kitkat today.
System version is:
171.44.31.falcon_umtsds.AsiaRetail.en.03
Looking into installing CWM - got adb working so will flash recovery and take a nandroid.
update: bah, just found that unlocking bootloader would void my warranty and requires a unique key from Motorola, so sorry, can't install CWM - phone is too new to void warranty until I'm sure it doesn't have any faults (this is my first non-Nexus phone so didn't realise bootloader unlocking would be so irritating).
edit: lol, looks like its already here on the forums, cool.. http://forum.xda-developers.com/showthread.php?t=2639384
I don´t know why, but my G isn´t installing this update on stock recovery and isn´t upgrading when using OTA updates. It always says that an error occurs, but never show me any error code. Anyone is having this issue?
Another strange thing, is that when I plug my device on my notebook, it doesn´t recognize which version of android I´m running.
I´ve flashed Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR and stills the same thing. Any help would be great
Thanks in advance.
---------- Post added at 10:54 AM ---------- Previous post was at 10:44 AM ----------
Hi, will this work on locked and unlocked phones?
Doubt
Hi!
Could I use this ROM if I brick my phone? I do really intend to install CM11, but I'm afraid if something goes wrong what should I do. As long as I know, the RSD Lite doesn't recognize our Mogo G, is there another safe (and easy) way to recover our phone as factory default?
Another newbie doubt, if we do install a ROM (let's say, one of the Motorola site - http : // sbf.droid-developers.org / phone.php?device=14 -without spaces]) we will have our bootloader locked back?
Thanks!
biscoitu said:
I don´t know why, but my G isn´t installing this update on stock recovery and isn´t upgrading when using OTA updates. It always says that an error occurs, but never show me any error code. Anyone is having this issue?
Another strange thing, is that when I plug my device on my notebook, it doesn´t recognize which version of android I´m running.
I´ve flashed Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR and stills the same thing. Any help would be great
Thanks in advance.
---------- Post added at 10:54 AM ---------- Previous post was at 10:44 AM ----------
Hi, will this work on locked and unlocked phones?
Click to expand...
Click to collapse
Hello, have you found a solution? I've got same problem!!!!
linsspinho said:
Hello, have you found a solution? I've got same problem!!!!
Click to expand...
Click to collapse
yes...I´ve flashed stock Blur_Version.14.71.8.falcon_umtsds.Brasil.en.BR, and then updated everything by OTA and now it´s running fine
w0mbl3 said:
My Australian-bought XT1033 (dual sim) got Kitkat today.
System version is:
171.44.31.falcon_umtsds.AsiaRetail.en.03
Looking into installing CWM - got adb working so will flash recovery and take a nandroid.
update: bah, just found that unlocking bootloader would void my warranty and requires a unique key from Motorola, so sorry, can't install CWM - phone is too new to void warranty until I'm sure it doesn't have any faults (this is my first non-Nexus phone so didn't realise bootloader unlocking would be so irritating).
edit: lol, looks like its already here on the forums, cool.. http://forum.xda-developers.com/showthread.php?t=2639384
Click to expand...
Click to collapse
I have the same XT1033 dual sim with 16GB and updated it to KitKat OTA. My Moto G was a grey import (into Australia) destined for India (it came with a Motorola charger and handsfree).
The system version is: 171.44.31.falcon_umtsds.AsiaRetail.en.03. This update does not break USB OTG functionality, it's the same update that was rolled out in India. It now shows OTG capability in Settings > Storage (see the bottom where it says USB Disk). I haven't used it yet, but here's a video below demonstrating it:
https://www.youtube.com/watch?v=9QLD8OknwyM
Here is a request to those that have updated to KitKat, is the OTG working after the update and which version was it?
And can someone upload the "171.44.31.falcon_umtsds.AsiaRetail.en.03.zip" update. I want to unlock and root, but also want to be able to return to the original stock rom later. :angel:
If you haven't updated yet, I think you can pull the file after you've downloaded it from the /Cache/ directory using adb. After downloading it, it will ask you whether to update later, choose later then pull the file to the desktop. I forgot to do this step...
Thanks :victory:
/EDIT
Nevermind, the Motorola naming of updates had me confused. The file that I was after was actually "Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03.zip" which can be found here: http://forum.xda-developers.com/showpost.php?p=49390749&postcount=1
When updated the version and baseband will be:
Baseband: MSM8626BP_1032.355.66.00R
System: 171.44.31.falcon_umtsds.AsiaRetail.en.03
Kernel:3.4.0-g9f5dcdc
Build num:KXB20.25-1.31
http://forum.xda-developers.com/showpost.php?p=50173342&postcount=56
biscoitu said:
yes...I´ve flashed stock Blur_Version.14.71.8.falcon_umtsds.Brasil.en.BR, and then updated everything by OTA and now it´s running fine
Click to expand...
Click to collapse
How did you do this? Is there any tutorial?
Kempf said:
How did you do this? Is there any tutorial?
Click to expand...
Click to collapse
Here is a guide to flash a full ROM:
http://forum.xda-developers.com/showthread.php?t=2542219
After that, you can flash an update OTA or from a zip.
It's not that easy, but it's a tutorial. Thanks!
Kempf said:
It's nota that easy, bit it's a tutorial. Thanks!
Click to expand...
Click to collapse
Just be prepared to do a bit of reading and research on the device and what you want to do with it. After a few years away from all this it can be a little overwhelming for me. If you can understand the process and learn from the mistakes others have made, you'll avoid them yourself. Be patient and think ahead, be sure of what you are doing and why then you won't have too many problems.
There's a new OTA update rolling out for Gem-702L (TW), the offiicial B202.
I haven't got it yet.
According to some info in a Taiwanese forum, Huawei plans to roll out B202 to all Gem-702L(TW) users within 2 weeks. There won't be any download link before that, not sure if there will be afterward.
Does anyone with 702L TW ROM installed getting the OTA?
It will be appreciated if someone can extract that for everyone else to update, and even for a dev to make a custom rom for it
Huawei Taiwan has officially released the B202 firmware for gem-702L
link page:
consumer.huawei.com/tw/tablets/support/downloads/mediapad-x2-tw.htm
the direct download link:
http://download-c.huawei.com/download/downloadCenter?downloadId=86208&version=339045&siteCode=tw
Not sure what's been updated. I am still downloading.
iamhcg said:
Huawei Taiwan has officially released the B202 firmware for gem-702L
link page:
consumer.huawei.com/tw/tablets/support/downloads/mediapad-x2-tw.htm
the direct download link:
http://download-c.huawei.com/download/downloadCenter?downloadId=86208&version=339045&siteCode=tw
Not sure what's been updated. I am still downloading.
Click to expand...
Click to collapse
Time to make a Simply International B202 rom.
ajsmsg78 said:
Time to make a Simply International B202 rom.
Click to expand...
Click to collapse
Awesome! I can't wait! :good:
iamhcg said:
Awesome! I can't wait! :good:
Click to expand...
Click to collapse
Done, links are in the Simply International thread.
will this rom reset the phone? thanks
kodoq said:
will this rom reset the phone? thanks
Click to expand...
Click to collapse
That depends on where you are coming from.
If you are coming from B005 of Android 5.0, yes, it will format the whole system and reset the phone.
if you are already in Android 6.0(B201), press *#*#2846579#*#* in your phone and get into engineering mode, choose "software update"; then it wont wipe your phone.
**Edited**
This method still clears out your phone. Remember to back up your data first.
I know this has been asked before but I can't find a straight answer to it.. if someone could help I'd be grateful!
I have 702L with B006. android 5.01.
Can I upgrade to B202 like this:
-Do a dload update straight to B202 stock
-unlock bootloader
-install TWRP 6.0
-install custom rom via fastboot
or do I need to install 703L 5.1 stock rom before updating to B202?
Thanks!
No update to 703.
You have the 702 and the Update is for 702.
Install Stock Recovery and flash via Download Method.
So I have to install stock recovery? My device isn't rooted and the bootloader is still locked.
iamhcg said:
That depends on where you are coming from.
If you are coming from B005 of Android 5.0, yes, it will format the whole system and reset the phone.
if you are already in Android 6.0(B201), press *#*#2846579#*#* in your phone and get into engineering mode, choose "software update"; then it wont wipe your phone.
Click to expand...
Click to collapse
done that, it erased my phone and i now have to reinstall everything again
kodoq said:
done that, it erased my phone and i now have to reinstall everything again
Click to expand...
Click to collapse
Really? sorry for that. I read it in other forum and I thought people updating from engineering mode still kept everything. you taught me a new thing.
Does anyone have stock recovery for B006 they can share?
Yes,download the Firmware from here
https://docs.google.com/uc?id=0B5I_q70mNuR4eGk5S0ZpUDlfODg&export=download
and copy the UPDATE.APP in Micro SD in the Folder “dload“
Go to Update Program in Settings and Local Update,and wait to finish the Update.
Hello, i have the 702 b006 stock
This new firmware, i have to put it in dload folder and force the manual inslallation. Is that ok?
I have seen is a taiwan rom... Or from asia.... Could i put on my phone? Does it have spanish languaje?
Or do you think will be european 202 rom in next days?
Sorry for my english.
Thanks
Enviado desde mi GEM-702L mediante Tapatalk
thor1553 said:
Hello, i have the 702 b006 stock
This new firmware, i have to put it in dload folder and force the manual inslallation. Is that ok?
I have seen is a taiwan rom... Or from asia.... Could i put on my phone? Does it have spanish languaje? Or do you think will be european 202 rom in next days?
Sorry for my english.
Thanks
Enviado desde mi GEM-702L mediante Tapatalk
Click to expand...
Click to collapse
I think the firmware is compatible to all gem-702L and yes, it's Spanish-lauguage supported.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom install from b003 on 702L worked flawlessly. supersu with the additional terminal command ( " echo SYSTEMLESS=true>>/data/.supersu " in Advance>terminal command>Select before you flash supersu.) beforehand works also.
but how do i install xposed?
g.moggel said:
Rom install from b003 on 702L worked flawlessly. supersu with the additional terminal command ( " echo SYSTEMLESS=true>>/data/.supersu " in Advance>terminal command>Select before you flash supersu.) beforehand works also.
but how do i install xposed?
Click to expand...
Click to collapse
Or you can just install this SuperSU that I modded to force systemless:
https://drive.google.com/file/d/0B5I_q70mNuR4YmVKbzRSQVkxcU0/view?usp=sharing
Thanks
Thanks. I'll keep it in mind if I have to set up again in the future. Will I have to go systemless with xposed also?
g.moggel said:
Thanks. I'll keep it in mind if I have to set up again in the future. Will I have to go systemless with xposed also?
Click to expand...
Click to collapse
No, Xposed works with regular root as well.
Hi guys, i am looking for a guide/tutorial to root and install twrp recovery.
It have android 6.0 MM (2016-03-01) and i would like to try CM13. My phone sometimes suddenly restarts (Its used like new, really look new). I think this was caused by battery or something like that. i dont know. it works fine.
I trying using this guide ( 26 august) "root-lg-g3-att-d850-marshmallow-install-twrp"
but i dont know how to boot is fastbook mode. i set " adb reboot bootloader" in CMD and it just restart my phone. Download Mode and Fastboot mode are the same thing?. Sorry i coming from Samsung GT-9300.
TheVergatarious said:
Hi guys, i am looking for a guide/tutorial to root and install twrp recovery.
It have android 6.0 MM (2016-03-01) and i would like to try CM13. My phone sometimes suddenly restarts (Its used like new, really look new). I think this was caused by battery or something like that. i dont know. it works fine.
I trying using this guide ( 26 august) "root-lg-g3-att-d850-marshmallow-install-twrp"
but i dont know how to boot is fastbook mode. i set " adb reboot bootloader" in CMD and it just restart my phone. Download Mode and Fastboot mode are the same thing?. Sorry i coming from Samsung GT-9300.
Click to expand...
Click to collapse
You cannot root MM 6.0. Not sure what guide you where trying but there is no thread here that I seen for rooting a D850 with MM 6.0. I did find some websites in google with missleading click bait titles which have fake info. To root you will first need to downgrade the device using LGUP.
hyelton said:
You cannot root MM 6.0. Not sure what guide you where trying but there is no thread here that I seen for rooting a D850 with MM 6.0. I did find some websites in google with missleading click bait titles which have fake info. To root you will first need to downgrade the device using LGUP.
Click to expand...
Click to collapse
Oh, that´s bad. :crying:
But can i do something? i would like to try custom roms. i was reading 2 threads about downgrade. 1 thread starting by you but says "only d855". I want to downgrade to root and install TWRP.
Hi, i am using this,[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #2 i was receive this message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can somebody help me.
TheVergatarious said:
Hi, i am using this,[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #2 i was receive this message.
can somebody help me.
Click to expand...
Click to collapse
That's because you can only use LGUP. Flash tool will not work with MM. You need to use LGUP.
Sent from my iPhone using Tapatalk
hyelton said:
That's because you can only use LGUP. Flash tool will not work with MM. You need to use LGUP.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Some guide/post here? i think that was only for variant d855.
TheVergatarious said:
Some guide/post here? i think that was only for variant d855.
Click to expand...
Click to collapse
My guide you used flash tool from. LGUP works with every lg android Device.
Sent from my iPhone using Tapatalk
hyelton said:
My guide you used flash tool from. LGUP works with every lg android Device.
Click to expand...
Click to collapse
Ok i am reading [Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #3, i have *.tot file an d LGUP. but LGUP_8994_DLL works with all variants?
TheVergatarious said:
Ok i am reading [Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #3, i have *.tot file an d LGUP. but LGUP_8994_DLL works with all variants?
Click to expand...
Click to collapse
I'm confused? You'll use LGUP and the tot file for your model.
Sent from my iPhone using Tapatalk
hyelton said:
I'm confused? You'll use LGUP and the tot file for your model.
Click to expand...
Click to collapse
i just need to start
TheVergatarious said:
i just need to start
Click to expand...
Click to collapse
Yes but remember downgrading can be risky when it comes from the newer firmwares.
Sent from my iPhone using Tapatalk
hyelton said:
Yes but remember downgrading can be risky when it comes from the newer firmwares.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Its done!, i have 4.4.2 now! THANKS MAN, i hope to solve problems with restarts!.
i have CM13 ! but, i need to replace the battery..its real problem. thanks man! you are great!!.
Hi everyone!
I browse multiple sites to download the official stock firmwares for the moto x play in all his variants.
Downloads!
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
https://firmware.center/firmware/Motorola/Moto X Play/Stock/
https://mirrors.lolinet.com/firmware/moto/lux/official/
https://androidfilehost.com/?w=files&flid=51159
https://github.com/motoxplay/stock
Flashing instructions :fingers-crossed:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
sorry i have bad english
Thanks, may be handy.
Maybe it will be a dumb question, but - when Nougat (official) arrives, what do I need to do, if I am on custom ROM? I think that a lot of people will struggle with this problem, so lets make it clear.
Do I need to only download the matching firmware (RETEU in my case) of 6.0.1, use the instruction you linked (flash via fastboot) and simply get OTA, while on stock? Can I have unlocked bootloader/custom recovery? It won't cause any problem? After updating, will I can root my phone again and flash custom kernel, while on stock?
Or will there be other, better method, like flashing official Nougat image via fastboot?
PanOptikum said:
Thanks, may be handy.
Maybe it will be a dumb question, but - when Nougat (official) arrives, what do I need to do, if I am on custom ROM? I think that a lot of people will struggle with this problem, so lets make it clear.
Do I need to only download the matching firmware (RETEU in my case) of 6.0.1, use the instruction you linked (flash via fastboot) and simply get OTA, while on stock? Can I have unlocked bootloader/custom recovery? It won't cause any problem? After updating, will I can root my phone again and flash custom kernel, while on stock?
Or will there be other, better method, like flashing official Nougat image via fastboot?
Click to expand...
Click to collapse
In the case of unlocked bootloader there is no problem at all.but you need stock recovery and not custom recovery like twrp to do OTA update.
mizaj said:
In the case of unlocked bootloader there is no problem at all.but you need stock recovery and not custom recovery like twrp to do OTA update.
Click to expand...
Click to collapse
Well, good to know. How to get stock recovery?
PanOptikum said:
Well, good to know. How to get stock recovery?
Click to expand...
Click to collapse
Flash stock rom....recovery is included in it!!
moto x play stuck in restart mode after wipe data from twrp
my Moto x play rooted phone. i have reset ( wipe data ) From TWRP and it is restarting. phone is stuck in restart mode. it restarting. Phone is not started.
Kindly help.
Flash stock
is there stock 7.1.1 fmw available anywhere
***RSD/Fastboot (Service/Full Flash) Image***
Model number: Moto X Play (XT1562) India
System Version: 26.31.1
Android Version: 7.1.1
Baseband Version: M8936_20250112.18.05.38R
Bootloader: 80.F3
Build Number: NPD26.48-24-1
Build Date: Mon Sep 11 01:59:44 CDT 2017
Android Security Patch Level: 1st September 2017
Checksum:
CRC-32: a1a2ae30
MD4: 87293a56b64c85af752756c1403156f7
MD5: 420a79605e80c2ed5ebda867b5fa53a6
SHA-1: 5380e38137ea4ab7580b654a3638ffa3bfb742cc
Download Links:
https://mega.nz/#!ilBzhQCa!Sonpj4GZinqOIf3NcQldFK8nf9ZBz6iUAvh6OkNYq84
https://github.com/motoxplay/stock/...PD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml.zip
https://drive.google.com/open?id=0Bz08OrxbxDBsQVp6d1VHaUZhV1k
Source Link:
https://forum.xda-developers.com/mo...o-x-play-india-brazil-official-final-t3691100 Thanks to @dheerajz
https://plus.google.com/117672241215103081187
Flashing Guide:
Fastboot: https://forum.xda-developers.com/mo...age-return-t3261486/post64101049#post64101049 by @The jOkEr!
RSD Lite: https://forum.xda-developers.com/moto-x-play/general/guide-how-to-flash-factory-image-using-t3545303
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice
camilo13ms said:
Hi everyone!
I browse multiple sites to download the official stock firmwares for the moto x play in all his variants.
Downloads!
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
https://firmware.center/firmware/Motorola/Moto X Play/Stock/
https://mirrors.lolinet.com/firmware/moto/lux/official/
https://androidfilehost.com/?w=files&flid=51159
https://github.com/motoxplay/stock
Flashing instructions :fingers-crossed:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
sorry i have bad english
Click to expand...
Click to collapse
Thanks, is it necessary that device need to be rooted before flashing ? and if the stock firmware match till 107_52 and only last digit mismatch like, in my version i have MPDS24_107-52-11 and i got firmware available MPDS24_107-52-5. There is no harm in flashing with that ?
In that update bootloader is bugged..fon getting shutdown at 20 percent after updating it. Even on custom rom.
From the many many stock firmwares is there any way to identify which one I have to flash to my phone?
I have XT1563 Dual SIM, there are lots of different firmwares for 1563.
PonchosoftX said:
From the many many stock firmwares is there any way to identify which one I have to flash to my phone?
I have XT1563 Dual SIM, there are lots of different firmwares for 1563.
Click to expand...
Click to collapse
go to the GitHub link. Yours should be the last one in the xt1563 section linked https://github.com/motoxplay/stock/...D26.48-24-1_cid12_subsidy-DEFAULT_CFC.xml.zip
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
I came from TruPureXMM 6.0, dont know if you have to come from stock 6.0 or can flash from AOSP, etc.
-- Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------------------------------------------------------
**INSTALLATION** [Don't try with LOCKED bootloader]
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. You might have to flash a modem that works in your country, if you are out of signal or no service you need a different modem (stock version its from latam/argentina)
Hit Thanks if it served you! Enjoy!
Links in comments
Firmware [updated 11-17]
https://mega.nz/#!p8BxnYDA!gXkTh258v5ENKwiu3jchplJNalA3D9KSRaorfgKly1I
well... i might as well try it...
wazaa08 said:
Firmware
https://mega.nz/#!YtR1FZjb!9NoBfIGBj8gQPAWD26DNZozrGIYMC74QWumBS78Dy0w"]https://mega.nz/#!YtR1FZjb!9NoBfIGBj8gQPAWD26DNZozrGIYMC74QWumBS78Dy0w
Modem XT1575
https://mega.nz/#!B8hVRLrS!kBTje3OmlpLCq2N8B--6YiUCVDwtbHGQRPoV0WWsFnU"]https://mega.nz/#!B8hVRLrS!kBTje3OmlpLCq2N8B--6YiUCVDwtbHGQRPoV0WWsFnU
Click to expand...
Click to collapse
What is the password?
edit
farvizu76 said:
What is the password?
Click to expand...
Click to collapse
Links corrected
Gracias!
Downloading... Muchas gracias por el aporte!
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. (XT1575 ONLY) flash 6.0 modem
Hit Thanks if it served you! Enjoy!
Links in comments
Click to expand...
Click to collapse
You forgot add:
Point 3. is impossible after 2. with locked bootloader.
For all, read before flashing:
https://forum.xda-developers.com/moto-x-style/help/unbrick-moto-x-pure-t3672108
Any chance you can upload the OTA August patch ?
Thanks for this ROM! I have a XT1575 Moto X Pure & I was able to install this ROM.
Only issue I've run into is I'm stuck on 3G after flashing the 6.0 modem, but at least I've got signal & data.
I also left my bootloader unlocked, you know, just in case?
I would like 4G LTE back though...
farvizu76 said:
What is the password?
Click to expand...
Click to collapse
dzidexx said:
You forgot add:
Point 3. is impossible after 2. with locked bootloader.
For all, read before flashing:
https://forum.xda-developers.com/moto-x-style/help/unbrick-moto-x-pure-t3672108
Click to expand...
Click to collapse
The modem is flasheable trough fastboot the same way the firmware, dont need unlocked bootloader.
(I could have uploaded the version with the xt1575 modem but I had to upload it all 2 times)
seven5three said:
Thanks for this ROM! I have a XT1575 Moto X Pure & I was able to install this ROM.
Only issue I've run into is I'm stuck on 3G after flashing the 6.0 modem, but at least I've got signal & data.
I also left my bootloader unlocked, you know, just in case?
I would like 4G LTE back though...
Click to expand...
Click to collapse
I have 4g normally in Argentina, try to flash the XT1575 modem from your region (US?)
Download the firmware from your region in pure fw & stuff post here, extract and replace the 3 files of my modem download (NON-HLOS.bin, BTFM.bin , fsg.mbn) and flash it via fastboot
So if this is for the 1575, can I use it in the USA and switch the language to English?
Realize if you use this on a XT1575 in the US, any future OTA's will fail... the modem's won't match the check.
Honestly, I wouldn't recommend this on anything but a Latin America device.
Thanks.
I flashed the Firmware over Lineage 14.1 as strangle this OS has problems with displaying names of incoming calls from Argentine Cellphone. Pecause of the "9" in my Phonebook it did not recognized local incoming calls from cellphone as they appear without the "9". Marshmallow Stock hadnt that problem.
Anyway..so far anything went smooth, but it seams my bootloader is locked now. I see that in the developer option the function
"Unlock OEM" is grayed out but the switch is in the ON position, which shoud indicate the it is unlocked.
How can i check that, as i want to flash custom recovery later.
Thomas_BA said:
Thanks.
I flashed the Firmware over Lineage 14.1 as strangle this OS has problems with displaying names of incoming calls from Argentine Cellphone. Pecause of the "9" in my Phonebook it did not recognized local incoming calls from cellphone as they appear without the "9". Marshmallow Stock hadnt that problem.
Anyway..so far anything went smooth, but it seams my bootloader is locked now. I see that in the developer option the function
"Unlock OEM" is grayed out but the switch is in the ON position, which shoud indicate the it is unlocked.
How can i check that, as i want to flash custom recovery later.
Click to expand...
Click to collapse
Boot into the bootloader, it is displayed right on the screen.
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Click to expand...
Click to collapse
Wonderful! Been waiting for the full firmware package, to avoid the whole process of flashing 6.0 first, applying OTA etc. Thanks!
One question: is it dual-sim compatible? Here in Brazil the firmware is LATAM-DS. Can I flash this one you shared including its original 7.0 modem?
Hi have a XT1575 and i live en Panama can you help me, i don't know how update
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
I came from TruPureXMM 6.0, dont know if you have to come from stock 6.0 or can flash from AOSP, etc.
-- Screenshot:
--------------------------------------------------------------------------------------------------------------
**INSTALLATION** [Don't try with LOCKED bootloader]
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. (XT1575 ONLY) flash 6.0 modem (it works in Argentina, you will need a different one for another region)
Hit Thanks if it served you! Enjoy!
Links in comments
Click to expand...
Click to collapse
slicetwo said:
So if this is for the 1575, can I use it in the USA and switch the language to English?
Click to expand...
Click to collapse
This firm is for XT1572, you will need to flash an US modem after flash the firmware.
I will update the post with a US modem too later