[Q] cm11 m6 not installing in stock 4.4.4?? HELP!! - Moto G Q&A, Help & Troubleshooting

My moto g couldn't boot into cm after flashing it. I was stock 4.4.4 rooted and latest Philz touch recovery. Xposed Framework was also installed. I downloaded official cm11 m6 build(this is the only available cm11 build and I don't want to try cm12 now due to instability issues and no dual sim support). First I wiped everything, and also formatted everything for better results. Then installed zip through USB otg. Installation was successful. Then I did factory reset and rebooted. There was unlocked boot loader warning as usual and after that screen went black. Then many lines...after sometumes it completely went black. I pressed power button and welcome to cyanogenmod screen appeared. But touch screen was completely frozen so language set up was not done. No response from touchscreen. I again installed stock and it worked. Then again installed cm11 and same results. I tried all the combinations like flashing from USB oot or /sdcard or /storage/sdcard0 or side loading method or again and again installing continuously.....without format and with format...without wipe and with wipe.....but all these things just give me one result--- screen freeze at language set up.....also I can't see any cm logo when I boot for first time...it just goes directly to language setup screen. And guess what, volume controls are wworkin at language setup and screenshot works (power+vol down)...... I spent a couple of hours on internet searching for similar questions but found none. ..all were related to bootlooping. But not like mine ,......so please guide me. I have tried by cm wiki guides and other guides available on internet
Edit- below is the screenshot attached. Only volume controls and screenshot working
Edit2- no gapps package was flashed

Anyone? Please!!

CM 11 m6 is toooo outdated
http://forum.xda-developers.com/moto-g/development/rom-cyanogenmod-11-aerokernel-t2853317
flash this..

TeamMex said:
CM 11 m6 is toooo outdated
http://forum.xda-developers.com/moto-g/development/rom-cyanogenmod-11-aerokernel-t2853317
flash this..
Click to expand...
Click to collapse
I have the same problem , only that my model is xt1032 .
I do not get bootanimation and the touchscreen does not work
----spanish----
tengo el mismo problema, solo que mi modelo es xt1032.
no obtengo bootanimation y el touchscreen no funciona

TeamMex said:
CM 11 m6 is toooo outdated
http://forum.xda-developers.com/moto-g/development/rom-cyanogenmod-11-aerokernel-t2853317
flash this..
Click to expand...
Click to collapse
Thanks I will try this. One question this ROM has aerokernel. So in future if I wish to try your xperience cm12 or official cm12..will there be any kernel problems?

Guru.Eclairs said:
Thanks I will try this. One question this ROM has aerokernel. So in future if I wish to try your xperience cm12 or official cm12..will there be any kernel problems?
Click to expand...
Click to collapse
Idk I only use my work so I never used this CM rom but is more updated, cm 11 M6 is outdated and yes have aerokernel my xperience aren't cm12 , and cm12 have official version.
kernel problems nope, you have screen flickering if flash stock 5.0 LP and later try to flash custom rom based on android 5.0

Thanks for your reply. Will report back

I have the same problem as OP. I can have other options i know. But im curious to know why this happens. Can anyone help me out to rectify this error please

Related

Help for installing this CM 12

Hey all,
Can someone explain me how to flash this version of CM 12 ? (link here, look for flamingo codename http://click.xda-developers.com/api... Pg. 4 | Sony Xperia E3 | XDA Forums&txt=here )
I tried cwm got softbrick
i tried the recovery from cm 12 from the dl package and got perma bootloops
I tried Flashtools but nothing happpens cause of the format type from system file
how to flash this rom with adb then? if its possible
Exerath said:
Hey all,
Can someone explain me how to flash this version of CM 12 ? (link here, look for flamingo codename http://click.xda-developers.com/api... Pg. 4 | Sony Xperia E3 | XDA Forums&txt=here )
I tried cwm got softbrick
i tried the recovery from cm 12 from the dl package and got perma bootloops
I tried Flashtools but nothing happpens cause of the format type from system file
how to flash this rom with adb then? if its possible
Click to expand...
Click to collapse
Do you have a 2203 variant?
adrianocolvero said:
Do you have a 2203 variant?
Click to expand...
Click to collapse
I have the D2203
adrianocolvero said:
Do you have a 2203 variant?
Click to expand...
Click to collapse
i got the same problem too
Same with me also.
Files must be encrypted for fxp dev,s only untill release. that,s was front page won,t show any cm12 for e3(flamingo) it must be worse than even android L aosp.
Use SONY AOSP instead of CM12
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
lexiyuri said:
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
Click to expand...
Click to collapse
means i flash cm12 or AOSP % ion my xperia e3 d2202
lexiyuri said:
I think its a better choice to follow official Sony AOSP Lollipop 5.0 method instead using Cyanogenmod 12. It doesnt matter if is D22XX (XX mean 02/03/06/12/43)
http://developer.sonymobile.com/kno...e/open-devices/list-of-devices-and-resources/
https://github.com/sonyxperiadev/device-sony-flamingo
Also, AOSP is closer to pureness in android, because even cyanogenmod have useful tricks that are not so pure.
@Exerath Try the AOSP and tell us!
Click to expand...
Click to collapse
@lexiyuri
I tried AOSP 5.0 BUT the only thing that makes me go back to kitkat is the knew bug with photos, If I can't take photos with my phone, I just can't work (I need to take photos oftens because I work on a "chantier" (not sure about the word but know as Dockyard too)
I would be happy to use AOSP and a working camera, if possible having root too so, if you have the solution --- Tell me how please
UP
I'm using 'AOSP_L_150129_flamingo' rooted - no camera, no gps ,no video and no recovery, Wifi was working but now it's not, bluetooth is good. I then flashed the boot image from 'Cwm20150203-UNOFFICIAL-flamingo' and now have recovery and still rooted.
So lots o good things but it's not usable yet.
westroger said:
I'm using 'AOSP_L_150129_flamingo' rooted - no camera, no gps ,no video and no recovery, Wifi was working but now it's not, bluetooth is good. I then flashed the boot image from 'Cwm20150203-UNOFFICIAL-flamingo' and now have recovery and still rooted.
So lots o good things but it's not usable yet.
Click to expand...
Click to collapse
how about battery life? do you experience any partial wakelocks?
noobAKO said:
how about battery life? do you experience any partial wakelocks?
Click to expand...
Click to collapse
No, battery life seemed ok, but I didn't pay too much attention to it. I've gone back to stock now.
hi,
I tried to flash FXP cm12 to my phone, and followed by this steps:
- I downloaded FXP-cm-12-20150209-UNOFFICIAL-flamingo.zip from here.
- Extract boot.img from zip.
- Flashed boot.img to my D2203. ( fastboot flash boot boot.img )
- Turn on the phone.
- When I pressed the Vol-Down key, when the purple light is on, I thought, the CWM will come, but it isn't.
- Nothing happened.
1st question: what did I do wrong?
2nd question: how can be flash the FXP cm12 to the D2203?
3rd question: from where can be download the working(!!) boot.img to cm12?
Thanks for reply.
ps: of course, at the end of the process, the rooted boot.img went back to the phone, and now it's working well...
furtongy said:
hi,
I tried to flash FXP cm12 to my phone, and followed by this steps:
- I downloaded FXP-cm-12-20150209-UNOFFICIAL-flamingo.zip from here.
- Extract boot.img from zip.
- Flashed boot.img to my D2203. ( fastboot flash boot boot.img )
- Turn on the phone.
- When I pressed the Vol-Down key, when the purple light is on, I thought, the CWM will come, but it isn't.
- Nothing happened.
1st question: what did I do wrong?
2nd question: how can be flash the FXP cm12 to the D2203?
3rd question: from where can be download the working(!!) boot.img to cm12?
Thanks for reply.
ps: of course, at the end of the process, the rooted boot.img went back to the phone, and now it's working well...
Click to expand...
Click to collapse
Try pressing volume key up and down till cwm boots.
westroger said:
Try pressing volume key up and down till cwm boots.
Click to expand...
Click to collapse
thanks, good idea, bur not working.
ps: are you tried too?
Return to stock inmediately and wait until sony releases an official lollipop. Stock is nice and you can use it everyday
But if you want lollipop so bad
Currently, FXP CM12 is not working well, but AOSP is working with bugs (no camera, no wake up) but is better than FXP CM12
I was dowload the FXP-cm-12-20150302-UNOFFICIAL-flamingo.zip,
from here.
Extract boot.img from zip, and flashed. ( fastboot flash boot boot.img )
Does anyone know how to, which keys press exactly to get CWM recovery?
VolumeUp or VolumeDown don't working.
I have D2203.
CM11 and CM12 now working on D2203
CM11 no bugs, everything working (NFC dont count as bug cause its just useless...)
CM12 almost same bugs as AOSP + no sound in rear speaker

[Q] CM12 on E3

Is it posible to install CM12 on my Xperia e3 if Yes, how can i do this?
Spy0x22 said:
Is it posible to install CM12 on my Xperia e3 if Yes, how can i do this?
Click to expand...
Click to collapse
First of all, CM12 for D2203 (ONLY!!) is at early stages and it isn't recommended to use it. IT HAS MANY LAGS AND BUGS
Spy0x22 said:
Is it posible to install CM12 on my Xperia e3 if Yes, how can i do this?
Click to expand...
Click to collapse
I tried to flash cm12 in cwm recovery but get aborted (staus 7) error tried modded build.prop still wont flash
only ASOP 5.2 flashed ok but too many bugs cant play videos totally useless currently!!
discodave83 said:
I tried to flash cm12 in cwm recovery but get aborted (staus 7) error tried modded build.prop still wont flash
only ASOP 5.2 flashed ok but too many bugs cant play videos totally useless currently!!
Click to expand...
Click to collapse
wipe cahe and data and flash cm12 it will work.
i had solved it on cm11 this way
For those who understand french go here for installing CM12, for the other, I'm sorry but I've a lot of work to do at highschool :/ when I'll have free time i'll translate it

Mi4i bootloop after flashing a custom ROM

I have installed Twrp recovery on my Mi4i.
When I flash a new ROM and restart the device, it completes the Android is upgrading process.
But once the finishing boot screen appears, the phone automatically freezes and shuts down.
After restarting the phone I get the Language selector screen of initial setup process,but that also freezes in some seconds.
In short the custom ROM is flashed properly but i could not go with the setup process.
When I flash the official Miui ROM it does not give me any trouble and the phone works perfectly fine.
Make sure you are using MiUI 6 developer version 5.6.11 or stable version below 6.7.10...
I have the same issue, where I can find old version ? From the official site doesn't work to download.
Do you have same mirrors for download?
L.E. I found version 6.6.1.0 on other site.
Are you sure that it will work fine?
I am also facing the same issue.
Sent from my Mi 4i using XDA Free mobile app
I'm pretty sure, because now I have a custom rom Cyanogen.
I am also facing the same problem, can someone help me in detail. I am new to rooting.
i m also facing the same issue
flash MIUI developer edition V5.6.11 or V6.6.x before you flash any cm12 based custom rom
I'm not the only one :highfive:
btw same thing happened on yureka when flashing miui on it. Forgot to mount /persist.
But here on twrp there is no option for /persist and no cwm for mi4i afaik :/
Thanks for putting this here in troubleshooting threads.
Faced same issue.
Downloaded and flashed http://bigota.d.miui.com/V6.6.10.0....ICF_20150626.0000.4_5.0_global_52e9660609.tgz
then followed with instructions of Custom ROM. No hang and restarts now
blue74lion said:
I'm pretty sure, because now I have a custom rom Cyanogen.
Click to expand...
Click to collapse
Hi I too have the same bootloop issue and I am on TWRP.
This solved the problem
kapil.git said:
Thanks for putting this here in troubleshooting threads.
Faced same issue.
Downloaded and flashed http://bigota.d.miui.com/V6.6.10.0....ICF_20150626.0000.4_5.0_global_52e9660609.tgz
then followed with instructions of Custom ROM. No hang and restarts now
Click to expand...
Click to collapse
Thanks a lot, this solved the problem
better options to flash Mi4i with custom rom
follow THIS PROCEDURE will safe your bandwith and time to download; download 50 M not 900 M
x1123 said:
follow THIS PROCEDURE will safe your bandwith and time to download; download 50 M not 900 M
Click to expand...
Click to collapse
Perfect solution great its now working.....
thank you....
I am facing the same issue on my galaxy s6, lollipop 5.1.1. Im in bootloop and im new to rooting and stuff. What do I do? Is there anybody that can help me? I was flashing a zip file, just to install the xposed framwork. Now im in bootloop, and need help to get out of it.
This really saved me a lot of time and got rid of boot loop
abdullahyousafzai said:
Perfect solution great its now working.....
thank you....
Click to expand...
Click to collapse
This really saved me a lot of time and got rid of boot loop
Thanks a log.
before installing the custom rom make sure to install BaseForMiUi-6.zip file a 30 mb file

rebooting issue for mi4i even after flashing stock rom??? urgent plz help

i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
tried it!!
elot01 said:
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
Click to expand...
Click to collapse
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
i too hav the same problem of rebooting continuously.Please help......
:crying::crying:
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
...................
please help........really frustrated
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
Atharva Logan said:
:crying::crying:...................
please help........really frustrated
Click to expand...
Click to collapse
Do you guys flash the miui 6 room using fFASTBOOT? Refer this link for the tutorial LINK
Fastboot rom is different from recovery rom because it has all the necessary files to return your device to complete stock rom as it includes recovery img, modem files etc. Try to flash the 6.6.10.0 or 6.6.5.0. Good luck
k
okay i will try.....Thank you
looping problem
i was burning my midnights oil for haplessely flashing Cm12.1.... nothing was happening...
later found out that i was not using miui dev ROM. then downloaded both 5.1 as well as 6.6...
still stuck at languages section... GAPPS was not the correct one. downloaded arm64 5.1 stock... voila.... running smooth since yesterday....
thanks @dh.harald & @omerjerk
now ready to try CM13
When you want a clean install, use the fastboot one. It seems to be a non-system partition problem, thus try flashing fastboot rom and see its outcome
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Sarthak1999 said:
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Click to expand...
Click to collapse
Use MIUI 6.6.10.0 or 6.6.5.0 and then flash any desired ROM on top of it. Else you may face problems and bootloops.
Yea its working thx
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
sreddy4u said:
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
Click to expand...
Click to collapse
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
sreddy4u said:
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
Click to expand...
Click to collapse
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
faizauthar12 said:
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
Click to expand...
Click to collapse
Tried to use the patch in miui update way. Unable to install.
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Ur problem solved? I am having same headache. I dont know what to do
arunsebstn said:
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
Ur problem solved? I am having same headache. I dont know what to do
Click to expand...
Click to collapse
Clean flash other custom rom,see if the problem solve.
raymond_bqg said:
Clean flash other custom rom,see if the problem solve.
Click to expand...
Click to collapse
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
arunsebstn said:
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
Click to expand...
Click to collapse
I had the same issue tried everything but no use then flashed miui and went to service as the phn was in warranty they changed the mother board and gave it back to me!!

XT1039 bootloop after flashing CM13

Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..

Categories

Resources