Hi everyone!
I tried to find information or if someone have just write before...but i think i can't find the way..
My problem is: i have the sourcecode of my Lg device and i have sync the cyanogenmod repo...how can i merge the code?
My device is LgC550, unfortunately is not supported yet but i want to develop custom rom..can someone help me?
Sorry for my bad english!
I don't think that that's as easy as you think. As far as I know Cyanogenmod isn't build from the norman android OS and so you can't just mix them and have a new rom But Maybe I'm not right.
I have a clones phone of CHERRY BURST / XOLO A500 / CROSS A28.
TeamBURST is working hard to make perfect cook roms, and I thanks to them.
But, I have some small wishes like TV out, OC,... my device, which need a custom kernel.
My friend have asked some developer about it but they said that they need a source code of my phone.
My phone is a Chinese phone and I can't find any source code of any clones have roms working on my phone.
Anyone can help me ? Please !
(Sory for my bad English)
Unfortunately you can't
thread closed
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. So don't be an *** ****
*/
hi.. i'm already started make some modifications on ROM with other Brazilian DEV's for "Evertek S.A - SKMtek Genesis Tab GT7305"... we already found the source kernel from another Netbook or Development Board PC who uses the same SOC... but nothing already have been maked to kernel, we use the provided kernel from stock (Kernel 3.4.5+)... and about the ROM we already have two custom ROM's... One is Stock Modded (4.2.2) and another is KitKat Ported ROM from another Evertek Device... *Portuguese-Brazil Language Site/Forum
And we already make some modifications to this KK port...
- ROOT
- BusyBox
- Init.D support
- Build.Prop Mods
- SuperUser
- zipalign apps after boot
.. and other mods.
we already make too much on ROM but nothing about kernel... we want make a better kernel with optimizations and a better TCP/Clock Table, More Governors , More I/O Scheduler and maybe Overclock to 1600mhz to start after have a custom Kernel booting...
Now we need someone who understand about recovery's like CWM or TWRP and Kernel Compilation better than me to we can start make something awesome =D i think this can be used to another company's/Chinese tablets too, using the same SOC (WM8880) evidently... . . . (Found^^Working^^Recovery's)
i can't start testing here because if i flash this kernel using the Stock Recovery (WonderMedia Recovery tool) maybe i can possible brick my tablet... so if someone understand about CMW recovery to start would be nice =D
Update Progress / ChangeLog ¬
Code:
# 25/12:
- [STRIKE]Found Possible match [URL="http://forum.xda-developers.com/showthread.php?t=2305268"]CWM port[/URL] from [URL="http://forum.xda-developers.com/showthread.php?t=2216390"]Asus MeMo Pad 7{ME172V}[/URL] on XDA Forum[/STRIKE] #NOPE...
- FOUND WOKING [URL="http://blog.hadi-cpu.com/2013/09/cwm-recovery-6036-w8850-rc2.html"]CWM Recovery[/URL] from Malasya Blog from Generic WM8850 SOC tablet , Founded [URL="http://blog.hadi-cpu.com/2013/10/twrp-touch-wondermedia-wm8850-jb-version.html"]TWRP recovery[/URL] too but not tested (Thanks to #Rollidark to notify me about and #osinaldi to discover that from malasya blog) [Mirrors -> [URL="https://www.4shared.com/rar/2POyc0B0ba/CWM_WM8850_NSFAT-RC2.htm?sop=true"]CMW[/URL] -> [URL="https://www.4shared.com/rar/rJBfUTQF/TWRP-JB-NSFAT-WM8850.htm"]TWRP[/URL]] // [URL="https://www.facebook.com/groups/NewSmartFrenAndroTab/"]Facebook Group of Recovery Developers[/URL]
- Studying some way to introduce the missing Touch driver to kernel from [URL="https://gist.github.com/psachin"]psachin Github[/URL]|[URL="http://cdn.liliputing.com/wp-content/uploads/2013/01/rock_02.jpg"]apc-rock-II-[/URL]|[URL="https://github.com/psachin/apc-rock-II-kernel"]kernel[/URL] how already modded the Source to work with [URL="http://tinyurl.com/oqxmuam"]Generic Netbook[/URL] who uses the same SOC
-- Merry Christmas to #ALL
# ?? to 23~24/12:
- ROM JB and KK + ADV. Patch developed by Brazilian Dev's team
- found Source Kernel to WM8880 SoC
Brazilian Developers who already help this projects from forum - genesiseries :
Code:
# KK ROM:
- #paulomsilva2006 {KitKat ROM Port}
- #Rollidark {KitKat Patch}
- #Wcfuria
- #? - Pedro Alves
- #? - Pedro Victor
- #? - Walter Moretti
- #? - Moises Teixeira
Code:
# JB Stock ROM:
- #ylukasy {ROM Dev.}
- #Rollidark
- #paulomsilva2006
- +?
if i forget someone.. please comment below :highfive:
Reserved
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
funtikar said:
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
Click to expand...
Click to collapse
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
DvDwx. said:
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
Click to expand...
Click to collapse
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
funtikar said:
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
Click to expand...
Click to collapse
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
what a coincidence , I was wondering today when you will reply lol
ah I see too bad, maybe you will share it at techknowme forum, ... wow Malaysian ?, Im asking because I'm Malaysian, can you pm me the link where its shared?
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
tuyenat3 said:
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
Click to expand...
Click to collapse
man... i just don't want blame anyone but... to we can do something to your tablet we need the kernel source and that don't stay open to developers... on this Chinese tablets we have some little configurations to can work with... but the custom kernel project i need to abandon for two reasons... first i don't have much time to can work to create a stable and functional custom kernel to everyone... second i don't have a kernel source compatible with tablets... what i found is from a electronics engineering Project computer Board ... and to it can fit on tablet is missing too much drivers compatibles with to can work smoothly and functional... someday if i found a new source maybe i can try comeback developer something to that =#
please continue developing this project
I use a genesis 7305 his kernel is very poorly optimized would like to make this usable tablet sorry for my bad English I use Google translator ;-;
2021... I tried to put a Chinese rom, but I brick the tablet, it only responds to fastboot, when I put the sudo command fastboot flash:raw boot uzImage.bin ramdisk.bin and plug in the charger and press power it appears a genesis screen.
Boot FOSSEE-OS from SCARD | FOSSEE-Laptop
laptop.fossee.in
GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
A low cost fossee-laptop based on wm8880 ARMv7 SoC - GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
github.com
hello, so i have been in communication with huawei regrading the kernel source. i mentioned the lack of source files for the mate 7 and how its part of the google/android agreement that oems must share all relevant sources for devices that use any part of android. they replied with the usual reply about how they will work hard to resolve this issue and whatnot. the rep did give me a link to the kernel source which i believe is for kitkat but i cant be sure so i hope that someone can verify.
having said that, why cant the kitkat source be used to build for lollipop and marshmallow? im still using a nook hd+ that is running MM......... WHAT??? how is this possible if the only kernel provided was for ICS? anyway, im going to keep poking at them until they either give up the LP/MM sources of they tell me to ****off. so, if anyone can please check out the link i would really appreciate it.
Lollipop Kernel?
My device is Nokia 3 TA 1032 running Android Pie rooted using Magisk and with TWRP custom recovery with kernel version 3.18.119+ ....
Is there a custom Kernel available for this device which is 3.19 or above.?.?.
If so ...can anyone provide me the link please.?.?.
And if not...does anyone know about porting/compiling kernel for this device.?.?.
please...i need some help....
https://ibb.*co/ MCBrDtC
mechano59 said:
My device is Nokia 3 TA 1032 running Android Pie rooted using Magisk and with TWRP custom recovery with kernel version 3.18.119+ ....
Is there a custom Kernel available for this device which is 3.19 or above.?.?.
If so ...can anyone provide me the link please.?.?.
And if not...does anyone know about porting/compiling kernel for this device.?.?.
please...i need some help....
https://ibb.*co/ MCBrDtC
Click to expand...
Click to collapse
I dont' know if there's a custom kernel for this device. But you can download the source code form here https://www.nokia.com/phones/en_int/opensource to compile it and add features by yourself.
Isrks said:
I dont' know if there's a custom kernel for this device. But you can download the source code form here https://www.nokia.com/phones/en_int/opensource to compile it and add features by yourself.
Click to expand...
Click to collapse
https://ibb. co/WWFxSsb
sir there seems to be multiple files...which one should i download.?.?. I am really new to this...
and I will be very grateful if you can point to any tutorials or blog posts on how to modify kernels coz i cant seem to find any...
mechano59 said:
https://ibb. co/WWFxSsb
sir there seems to be multiple files...which one should i download.?.?. I am really new to this...
and I will be very grateful if you can point to any tutorials or blog posts on how to modify kernels coz i cant seem to find any...
Click to expand...
Click to collapse
To compile a kernel from source you can follow this tutorial.
https://forum.xda-developers.com/android/software/ultimate-guide-compile-android-kernel-t2871276
There are more threads, this is an example.
The build number in your screenshot (5_180) tells the number of the kernel version you need to download (i want think so ), in this case is the Nokia3_V5.180.tar.bz2 file.
Isrks said:
To compile a kernel from source you can follow this tutorial.
https://forum.xda-developers.com/android/software/ultimate-guide-compile-android-kernel-t2871276
There are more threads, this is an example.
The build number in your screenshot (5_180) tells the number of the kernel version you need to download (i want think so ), in this case is the Nokia3_V5.180.tar.bz2 file.
Click to expand...
Click to collapse
Thank you very much sir....will see if i can do anything with it...
(very sorry for the late reply... )
mechano59 said:
Thank you very much sir....will see if i can do anything with it...
(very sorry for the late reply... )
Click to expand...
Click to collapse
With having a linux environment you can build a kernel from source reading the guides. Adding features is more difficult because the main reason: this device has mediatek SoC.