hello dear mt7 users...
I have n9005 and I`d like to change it with mt7,but here I can`t find the gold version, so I must think about l09
something I wana you kindly answer me are these:
1. does mt7 l09 root?
2. after root ,can I update to android 5 in future?
3. can I root it without unlocking BL?
4. is there any english thread which clearly explain how to install official rom , unlock , root , etc for mt7 l09? (if yes, could you please link me?)
I love mt7 design and I hope its battery could give me about 8h screen on.
(I`ve used Samsung flagship from s2 till note3 and I hate note4 now! and I did everything on my Samsung phones, custom rom and custom kernel and ...)
thank you for your help
1. Yes you can root
2. Yes, you will be able to update when OTA will be avaible or with manual update throught updater app on the phone. You must have stock recovery to do official update.
3. For now only MT7 L10 can be rooted without unlocking BL. You must unlock booot loader for MT7 L09.
4. Search on mate 7 subforum, you have tutorial how to unlock bootloader, flash cwm recovery, root...
After that you can flash stock recovery and flash OTA updates in future with root.
You can achieve up to 10 hours of on screen time, but that depends of how you use the phone and what time of connection to network you are using. With litle of gaming, browsing and some base functions of the phone (phone and massaging), some camera, you can have 2 days usage with 6 hours on screen time. My best screen on time i 9h 30min with two and a half days of use.
This phone have the best premium feel of all phones, simply amazing build quality and design...
Mr.Nice.ba said:
1. Yes you can root
2. Yes, you will be able to update when OTA will be avaible or with manual update throught updater app on the phone. You must have stock recovery to do official update.
3. For now only MT7 L10 can be rooted without unlocking BL. You must unlock booot loader for MT7 L09.
4. Search on mate 7 subforum, you have tutorial how to unlock bootloader, flash cwm recovery, root...
After that you can flash stock recovery and flash OTA updates in future with root.
You can achieve up to 10 hours of on screen time, but that depends of how you use the phone and what time of connection to network you are using. With litle of gaming, browsing and some base functions of the phone (phone and massaging), some camera, you can have 2 days usage with 6 hours on screen time. My best screen on time i 9h 30min with two and a half days of use.
This phone have the best premium feel of all phones, simply amazing build quality and design...
Click to expand...
Click to collapse
I can't find any way to unlock l09, product id generator doesn't work!
Is there any other way to get unlock code?
Product id works perfectly, i use that method...
but now it gives me ERROR:
http://forum.xda-developers.com/mate-7/general/huawei-ascent-mate-7-unlock-recovery-t2941525/post58306913#post58306913
:crying:
Here are the instructions I folowed and everythink worked perfectly...
getmobilephone said:
@azoznet submitted this easy method for getting the unlock code for MT7-L09. Thanks to our Saudi forum member!
Quote begins:
First go to the following page
Huawei Product ID Generator.rar
download Huawei Product ID generator down and starting this.
Product Model selects Huawei Y300-0000 from her and give in your IMAI Product IMEI of your mate 7 L09
Next, you go on
EmotionUI - Unlock Bootloader
Scroll down and Click on the hook, and then click Next
On the next page you do the following
Product type: Smartphone
Product model: Huawei Y300-0000
Product SN: serial number of your Mate 7
Product IMEI / MEID: IMEI of your Mate 7
Product ID: your number from the Product ID generator
Then you give the Captcha and sends all off.
Now at the end of your unlock code should be generated
Click to expand...
Click to collapse
After code is generated use comandpromt and fastboot to unclock bootloader...
Related
Hi guys,
I followed this post to root my P8 Max http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213
Problem is, that my phone just died after 3 more reboots. It was working fine and rooted but after 3 reboots it would only boot into TWRP and then not at all. I had to flash the stock firmware B005 (from B002).
Bootloader is unlocked but now FRP lock is always on in Fastboot mode and I cannot get rid of it.
Any attempt to flash anything results in failure as FRP is always on. Is there any way of getting rid of this besides taking it to a service center?
UzY3L said:
Hi guys,
I followed this post to root my P8 Max http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213
Problem is, that my phone just died after 3 more reboots. It was working fine and rooted but after 3 reboots it would only boot into TWRP and then not at all. I had to flash the stock firmware B005 (from B002).
Bootloader is unlocked but now FRP lock is always on in Fastboot mode and I cannot get rid of it.
Any attempt to flash anything results in failure as FRP is always on. Is there any way of getting rid of this besides taking it to a service center?
Click to expand...
Click to collapse
FRP you can switch off
here:
http://www.droid-life.com/2014/11/0...nable-oem-unlock-option-in-developer-options/
Greets, Peter
greddy said:
FRP you can switch off
here:
http://www.droid-life.com/2014/11/0...nable-oem-unlock-option-in-developer-options/
Greets, Peter
Click to expand...
Click to collapse
That's the problem : Android 5.0.1 had that, which was the original firmware for the P8 Max DAV-701L, meaning B002.
B005 which is Android 5.1.1 does not have the option "Allow OEM unlock" in Developer Options or anywhere else in the menu.
The firmware that I flashed in order to save my device is B005 and when flashing using EMUI recovery, it fails at 51% and then the phone restarts. After restart, it works fine, except :
-no motion controls in menu
-increased battery consumption
-Fastboot mode reports : Phone - Unlocked / FRP - Locked
I can't find the original firmware for my device anywhere. Not even recovery with WiFi has it or HiSuite. Huawei support is absolute ****.
So now I have a device with an unlocked bootloader but the FRP lock is always on so I can't flash anything, not even the original recovery.
I don't even know why FRP is on. I reset the device 3 times and it never asked me for the google account. I have always used the same account on all my devices and even the google servers report that my current device is P8 Max.
UzY3L said:
That's the problem : Android 5.0.1 had that, which was the original firmware for the P8 Max DAV-701L, meaning B002.
restarts. After restart, it works fine, except :
-no motion controls in menu
-increased battery consumption
-Fastboot mode reports : Phone - Unlocked / FRP - Locked
I can't find the original firmware for my device anywhere. Not even recovery with WiFi has it or HiSuite. Huawei support is absolute ****.
I don't even know why FRP is on. I reset the device 3 times and it never asked me for the google account. I have always used the same account on all my devices and even the google servers report that my current device is P8 Max.
Click to expand...
Click to collapse
Hmmm, i am sure i have the option in my b005 but now i can not look coz i have the same stupid status of my 701
I can only use KangVIP .. without Wifi/BT
B029, B002, B005 never work longer then 10 seconds then reboot.
I will never buy Huawei ... since 2 days i use my HTC One Max ...
Waiting für Huawei "Full"-Update B209 or TWRP-Backup ...
Greets, Peter
greddy said:
Hmmm, i am sure i have the option in my b005 but now i can not look coz i have the same stupid status of my 701
I can only use KangVIP .. without Wifi/BT
B029, B002, B005 never work longer then 10 seconds then reboot.
I will never buy Huawei ... since 2 days i use my HTC One Max ...
Waiting für Huawei "Full"-Update B209 or TWRP-Backup ...
Greets, Peter
Click to expand...
Click to collapse
Thanks, Peter. I'll wait a bit more. If not option comes up, I'll take it to a service center to have it flashed back to stock and leave it alone until the development options mature for this device.
Cheers!
UzY3L said:
Thanks, Peter. I'll wait a bit more. If not option comes up, I'll take it to a service center to have it flashed back to stock and leave it alone until the development options mature for this device.
Cheers!
Click to expand...
Click to collapse
But the empty page in motion controls its only one xml file, you can copy in data/cust/xml and then all options are there, but for
increased battery consumption i have no idea
greets, peter
Fixed in in the service center. Huawei is still very immature in terms of software support. I'd wait a few more years before trying to root this thing again. If the software version for the DAV-701L for the EMEA region is anything but DAV-701LV100R001C100B002 the phone will hate it.
I am back on DAV-701LV100R001C100B002 and the phone has just eaten 10% battery since this morning. Feels good.
UzY3L said:
Fixed in in the service center. Huawei is still very immature in terms of software support. I'd wait a few more years before trying to root this thing again. If the software version for the DAV-701L for the EMEA region is anything but DAV-701LV100R001C100B002 the phone will hate it.
I am back on DAV-701LV100R001C100B002 and the phone has just eaten 10% battery since this morning. Feels good.
Click to expand...
Click to collapse
where you got the DAV-701LV100R001C100B002 Rom ? Where i can download ?
Greets, Peter
greddy said:
where you got the DAV-701LV100R001C100B002 Rom ? Where i can download ?
Greets, Peter
Click to expand...
Click to collapse
Only in the Huawei Service Center, Peter. You can't find it online. Trust me, I tried.
Since a lot of weeks and a lot of bricks I’ve tested this solution. You don’t need an unlocked bootloader or rooted phone, you just have to pay 15€.
Before testing be sure you have the full firmware of your phone to go back if you need so.
You need :
DC-Phoenix
full firmware NXT-L29432B320
15 € credit for www.dc-unlocker.com
You will first use :
DC Phoenix New Account (it costs 15 euros for 15 credits to use for 72h after initial flash (small price to pay compared to sending to repair shop or having a useless brick)
An UPDATE.APP at your choice for your phone (AL10 or L29, both are interchangeable) -
This file with partition rework and factory firmware -*DOWNLOAD*
1. Make sure you have at least 30% of battery.
2. Open DC Phoenix and login with your credentials.
3. Put your phone in fastboot mode (Vol. - + Power).
4. Select «fastboot mode» in DC Phoenix and then go to the «IMG FILES» tab.
5. Select the «NXT-AL10_M00A102_Factory_firmware_Global_Nonspecific_A ndroid_6.0_EMUI_4.0» file and hit Open.
6. Click on «Update» and be patient. This should take 10 minutes.
7. Follow the log on the left. When it says «writing success», reboot your phone (Vol. - and Power until display goes off). The phone should normally boot into a Chinese-like ROM.
This would install a factory firmware, erase all data and re-partition your phone, after that you would be able to install a new ROM.
My phone was mate 8 DL00 3/32Go and was with NXT-C900B180, no update OTA.
8. Put your phone back in fastboot mode and select the «APP FILES» tab in DC Phoenix.
9. Select your UPDATE.APP, from the zip file you've downloaded, and hit Update. Be patient. This may take up to 20 minutes.
10. Again, look at the log for «writing success» line and then reboot your phone.
Now my phone is NXT-L29C432B320 and a new update is immediately available NXT-L29C432B330
Big thanks to djmitza222 who posted THE tuto to unbrick mate 8.
I was looking for a trick to change my international ROM by european one, I’ve tested his post and work's with a full firmware ROM. :silly:
If your phone is bricked see djmitza222's tuto
Just few minutes later I've received NXT-L29C432B560, donwload, install, reboot.
All seem's to be :good:
Whait and see
Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you
scotty2b said:
Just few minutes later I've received NXT-L29C432B560, donwload, install, reboot.
All seem's to be :good:
Whait and see
Click to expand...
Click to collapse
Hey mate, if you would share your accountname and and pw via PM to me, i could save 15$
Your 15$ code is for 2weeks active - would be nice man!
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
paridao said:
Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you
Click to expand...
Click to collapse
you need c432b320.zip!
i would appriciate if you got that done you txt me private - so maybe i can save 15$
paridao said:
Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you
Click to expand...
Click to collapse
Yes I'm sure zip contains NXT-L29C432B320, perhaps you must change oeminfo before, to be EU.
I've done this and after, unroot and install zip file with dc-phoenix.
scotty2b said:
Yes I'm sure zip contains NXT-L29C432B320, perhaps you must change oeminfo before, to be EU.
I've done this and after, unroot and install zip file with dc-phoenix.
Click to expand...
Click to collapse
Thanks scotty2b,
there is a guide i can follow to do that?
I would need also to relock bootloader at the and, 'cause, after that process, device remains unlocked (red color).
Thank you very much!
paridao said:
Thanks scotty2b,
there is a guide i can follow to do that?
I would need also to relock bootloader at the and, 'cause, after that process, device remains unlocked (red color).
Thank you very much!
Click to expand...
Click to collapse
Yes there is a guide (google is your friend ), but after you have unlocked and rooted your phone you just have to use SrkTools and change oeminfo.
See this tuto : How to switch to use stock firmware from other models
at SrkTool prompt use menu 7 and 9, choose mate 8 and eu ( 432 )
Some time you need to do reset factory default after changing oeminfo, just check after modification like test below.
I think your phone don't have vendor info, when you use this code *#*#2846579#*#* and network information query / vendor country info
If all is good you must see :
Vendor Country Info
Vendor: hw
Country: eu
Have a nice day
L09c636b191
Will this method work with L09C636B191 ? Thanks
frugalpov said:
Will this method work with L09C636B191 ? Thanks
Click to expand...
Click to collapse
I think it's possible but you must Choose factory firmware for your phone in phoenix data base :
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
After flashing the factory firmware, all would be erase on your phone (exept oeminf and IMEI, so you must unlock your bootloader, root your phone and change country with SrkTools) and you should flash full firmware for L09 with the country you would like to have.
Flash a firmware just before the new one ( for exemple if the latest is B560 take the full B330 or 320), so you should test if OTA update works fine.
I've only tried the tuto at the top of the thread.
man i did this with dc phoenix and changed my phone from NXT-C900B180 to NXT-L29C432B330 and after i got nougat b581 and i updated and have nougat now my problem is that my bootloader locked again and the previous bootloader code deosnt work my s/n changed from the original one from the box to 123456789ABCEF and in huawei site says when i want to get new bootloader code s/n and imei missmatch also dc unlocker gets bootloader error when i press read bootloader code and with original sn code works but gives me the same and because phone has different s/n says code is not corrent when i try to unlock it via fastboot
nikolas60 said:
man i did this with dc phoenix and changed my phone from NXT-C900B180 to NXT-L29C432B330 and after i got nougat b581 and i updated and have nougat now my problem is that my bootloader locked again and the previous bootloader code deosnt work my s/n changed from the original one from the box to 123456789ABCEF and in huawei site says when i want to get new bootloader code s/n and imei missmatch also dc unlocker gets bootloader error when i press read bootloader code and with original sn code works but gives me the same and because phone has different s/n says code is not corrent when i try to unlock it via fastboot
Click to expand...
Click to collapse
Sorry, I don't know what is happening.
My bootloader was unlocked and after the upgrade with DC Phoenix it was already unlocked.
I've found this :
u can fix it using the HCU tool to repair or reinstate serial/imei but you have to have that information at hand..once done repairing you can proceed to read the bootloader code using the same tool..at fastboot, the phone may already show that bootloader unlocked but all you have to do is unlocking the bootloader again using code received from HCU tool, via fastboot oem unlock XXX.
To go from 900 international to anything but al10 is already free all u have to do is install newer rom with same cust ....
c|nder said:
To go from 900 international to anything but al10 is already free all u have to do is install newer rom with same cust ....
Click to expand...
Click to collapse
How do i do that, flash system, boot and recovery.img using fastboot without reflashing cust?
Hi,
My MATE 9 MHA L09 is bricked and now i only have erecovery, dload and fastboot method to recover
on my phone screen in fastboot mode it says phone unlocked but while executing commands in HWOTA it ask for unlock password
to acquire a password i need a product ID
is there any method to acquire product id EXCEPT HUAWEIPRODUCTIDGENERATOR (DOESN'T WORK)
any help would be much appreciated.
My phone details
Found Phone : MHA-L09
Model : Huawei phone in fastboot mode
IMEI : 861956030103197
Serial NR. : UGM0217216001969
Firmware : NRD90M test-keys
Don't fret there is a way,
Happened to me a few weeks ago
https://www.google.co.uk/amp/s/foru...lp/how-to-product-id-bricked-p9-t3561156/amp/
sutty86 said:
Don't fret there is a way,
Happened to me a few weeks ago
https://www.google.co.uk/amp/s/foru...lp/how-to-product-id-bricked-p9-t3561156/amp/
Click to expand...
Click to collapse
That's the way that doesn't work for OP.
Sadly there are no other ways without booting.
It did work for me and at least one more Mate 9 user, that user made the error of not selecting Huawei Y300-0100 in the program and didn't select Before EMUI 5 on the EMUI website.
Hello everyone, I need my help, I bought my Honor 8 in Gearbest, version AL-10 (Chinese), but I made the huge mistake in updating, and with that it was only on the screen of eRecovery, searching the internet I found some steps and I did it, but now my cell phone does not call anymore, it's only on the screen with the Blue Honor logo, I can not do anything else, I do not enter eRecovey anymore, I can only enter Fastboot mode, but the phone is locked, Unlock this mode, from what I read I need to unlock it, but I do not have the product id to complete the unlock process, does anyone have any light on how it could make him come back to life?
How do you get it back into eRecovery mode?
Thank you guys
Sorry my english, I do not have much knowledge of the language.
Rommco05 said:
Have you unlocked bootloader?
Click to expand...
Click to collapse
Hello my friend
yesterday I ended up getting
I used a program called DC Phoenix, it unlocks and makes the recording of the new firmware
But now I'm trying to find a correct firmware for my cell phone
He entered cross flash, I installed a version yesterday and when he came up he showed me another version.
Hi alisonduarte,
You bought a chinese model of Honor 8 (AL10). But, did it came with a AL10 firmware or, in most cases of imported models, a rebranded one. (L14 or L19 maybe).
Rebranded chinese models (AL00 and AL10) are known to bootloop with recent firmwares. The last working firmware, for my own rebranded AL00 phone, is B380.
I advise you to rebrand your AL10 to L19, with the help of this link: https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220 (L19 Firmware link is dead, another link here: https://mega.nz/#!ELQXnYgb!H7c0hCSIZ6N3ljMBm8JD21-aaNY3E-1JD0M99dntr7o)
Then update to B380 using "Firmware Finder for Huawei" app -or- "dload" folder method -or- RedLotus method. (For the last one: HiSuite 5.0.1.300 needed, download link here. Use this "filelist.xml" link for FRD-L19C432B380 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v77475/f2/full/filelist.xml)
Good luck! =)
Hello,
1st i want to say, that I am not a phone expert. I got (I could not choose) this Mate 9 but how you already know it's chinese version. I was researching but after reading so many threads and websites I got tired and confused that I had to sing up for help. I would like to ask if there is a option how to unlock bootloader, because the officially way through Huawei website seems to be shut down. The link for registration for the unlock code does not work and I could not find any information about it on the huawei website. So is there any free way how to unlock it ? I want to change the region and get fully English rom. Another question is, I read on couple websites that AL00 should get the new EMUI 8, I have in the phone 5 and I am wondering how to upgrade to version 8. Again I found some info and files for download but boodloader has to be unlocked but on other side I saw something that it should be officially upgrade, so I will still need unlock bootloader ? If no, how can I make upgrade to emui 8 ? Current I have B186 and next new upgrade I have B233, I didn't download that one yet. Do I need some special build and after it will be installed will show up the upgrade to emui 8 ?
Thanks a lot for help.