Hello, yesterday i briked my htc one X from att updating TWRP from the app
- The cell did not turn over, not charge the battery, not turn on or with volume down or with volume up
- the screen is completely BLACK
when i connect to the PC In the device manager only see it as "Android USB Devices" and inside "My htc"
I tried to fix using RUU did not work because not boot
From the cmd .. the comand adb no show nothing
adb devices
adb server is out of date. killing ...
* Daemon started successfully *
List of devices attached
Click to expand...
Click to collapse
Fastboot yes....
fastboot getvar all
(bootloader) Version: 0.5
(bootloader) version-bootloader: 2.18.0000
(bootloader) version-baseband:
(bootloader) version-cpld:
(bootloader) version-microP:
(bootloader) version-main: ÿ☻ƒÕ
(bootloader) version-misc: UNKNOWN
(bootloader) serialno: t ☻
(bootloader) IMEI: THEREALIMEI
(bootloader) product: └
(bootloader) platform: HBOOT-8960
(bootloader) modelId: TÉ►üTÇ É►ü $ Ç Ç $ É►ü Ø ▲ /
(bootloader) cidnum: É ¼ *
(bootloader) battery-status: good
(bootloader) battery-voltage: 3530mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-d3bfc037
(bootloader) hbootpreupdate 11
(bootloader) gencheckpt: 0
all: Done!
finished. Total time: 0.075s
Click to expand...
Click to collapse
Please Help!! sry for my english (L)
3540mv is basically a dead battery, for one. So charge your device first.
Secondly, are you sure you flashed the correct TWRP for the Evita and not the International One X? If Fastboot works, you should be able to reflash it.
Yep, charge your device fully first, keep it connected for at least five hours without interruption or interference. What app did you use to update TWRP?
Transmitted via Bacon
I'm getting the same thing.
And when I try to flash revovery I get.
fastboot flash recovery openrecovery-twrp-2.8.4.0-evita.img
sending 'recovery' (11170 KB)...
OKAY [ 0.614s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.688s
timmaaa said:
Yep, charge your device fully first, keep it connected for at least five hours without interruption or interference. What app did you use to update TWRP?
Transmitted via Bacon
Click to expand...
Click to collapse
i use the oficial app of twrp (downloaded with playstore)
3530mV is ~%50 of batery that is not the problem but i try it
Freak said:
I'm getting the same thing.
And when I try to flash revovery I get.
fastboot flash recovery openrecovery-twrp-2.8.4.0-evita.img
sending 'recovery' (11170 KB)...
OKAY [ 0.614s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.688s
Click to expand...
Click to collapse
that is because your phone is locked o relocked
Related
Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
If you can get into fastboot like you are. Your not hard bricked.
To flash the RUU like you are doing. In fastboot do the following commands...
Fastboot oem rebootRUU
Fastboot flash zip PL99IMG.zip
That should work.
Sent from my HTC6435LVW using Tapatalk 2
Flyhalf205 said:
If you can get into fastboot like you are. Your not hard bricked.
To flash the RUU like you are doing. In fastboot do the following commands...
Fastboot oem rebootRUU
Fastboot flash zip PL99IMG.zip
That should work.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
not work
Fixed by RIFF box JTAG
Thanks
Help, HTC butterfly bricked,blocked in fastboot
Hello everyone,
asking for your help because my htc butterfly is stuck in fastboot after the procedure to bring it back to stock rom.
Unfortunately I could not find the ruu.exe and tried as indicated but unfortunately they are now in this situation.
Now the phone is relocked and S-ON, is there any way to replace it?
thanks to those who help me.
help
vjeson said:
not work
Fixed by RIFF box JTAG
Thanks
Click to expand...
Click to collapse
can you make downgrade from 1.29 ota to 1.15 with riff box?
I am locked and I can sim unlock! please give more details!
thank you
vjeson said:
Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
Click to expand...
Click to collapse
you're have soff, are you chaged cid? with stock rom you're need write cid (your CID of stock rom) , flash FW and get token code again (fastboot oem get_identifier_token)
after unlock bootloader, you can flash stock rom.
Junior Member - OP :
How can you Fixed by RIFF box JTAG
no JTAG for HTL21...
can you help me..
I Have the same problem as you..
bright screen (blank), fastboot ok..
but failed..
please help me..
Thanks.
vjeson said:
Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
Click to expand...
Click to collapse
1. Download firmware from here:
https://mega.co.nz/#!pEVXGZ6K!auhgoO81DzNQduWfJPQJ-lBV6g29PL6wAOEvpYsm1Hk
2. On fastboot, flash this firmware
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip firmware1.55_cid044.zip
fastboot reboot-bootloader
and see if you can manage from here.
Credits:
victor0888
---------- Post added at 02:01 PM ---------- Previous post was at 01:39 PM ----------
Try to download and flash a new/different firmware.
Dear Experts..
I bought HTC Desire 5088 from China for my father
and it doesnt have Google Play services and has Blinkfeed with Chinese News feeds :crying:
To change all that i wanna ROOT this device and make some needed changes
Have already Unlocked the Bootloader,
But this Phone has weird old HBOOT version:-
Kinldy check the results from Fastboot command -
C:\Users\AB\Desktop\FASTBOOT>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.35.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.80.1403.14
(bootloader) version-misc: UNKNOWN SHIP S-ON
(bootloader) serialno: HC43PWE00770
(bootloader) imei: 35519500000100
(bootloader) meid: 35519500000100
(bootloader) product: z4td
(bootloader) platform: HBOOT-SP8830
(bootloader) modelid: 0P3Z20000
(bootloader) cidnum: HTCCN704
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f75a5d23
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
anyhow, i thought to try the CWM Recovery file for HBOOT version 1.02 (which seems to work for HTC Desire 500)
When i run Fastboot command -> fastboot flash recovery recovery.img
That goes sucessful as:-
C:\Users\AB\Desktop\FASTBOOT>fastboot flash recovery recovery.img
sending 'recovery' (6982 KB)...
OKAY [ 0.309s]
writing 'recovery'...
OKAY [ 0.577s]
finished. total time: 0.886s
However, when i try to enter Recovery Mode
It just keeps the message "Entering Recovery... " on htc whte screen
i let it wait for 30 minutes and then had to power off the device..
Could any of you Experts kindly Help me out..
With suggestion of approach or maybe a different verison of CWM recovery file which i should try?
Any help would be highy appreciated :good:
Thanks,
Prvsh....
any custom recovery for this device..? htc 5088..?
Hi all,
My friends HTC One SV has got itself stuck on the boot screen. Also I cannot enter recovery mode (Selecting "recovery" just vibrates, shows the android skaters, and then goes back to hboot).
After booting into hboot and then fastboot usb, I'm trying to flash a new recovery image or a new boot.img. Unfortunately I get this output:
Code:
>fastboot.exe devices
HT31KTP01681 fastboot
>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxx
(bootloader) meid:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2bb255c2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.093s
>fastboot flash recovery TWRP-2.7.0.1-k2_ul-k2u.img
sending 'recovery' (8452 KB)...
OKAY [ 1.203s]
writing 'recovery'...
[B]FAILED (remote: image update error)[/B]
finished. total time: 2.513s
>fastboot flash boot images\422_k2ul_stock_kernel\boot.img
sending 'boot' (6160 KB)...
OKAY [ 0.911s]
writing 'boot'...
[B]FAILED (remote: image update error)[/B]
finished. total time: 2.224s
Anyone else seen this and know if its fixable?
Info at the top of hboot:
Code:
TAMPERED
UNLOCKED
K2_UL PVT SHIP S-ON RL
HBOOT-2.21.0000
OS-
eMMC-boot 1024MB
Nov 7 2013 15:32:31.0
@captainbadger
First: removed the serial number also from you fastboot devices result, please.
Then, have you tried another recovery build too? This one should also work on your hboot.
About the hboot: you can't update your hboot when the device is S-On.
What you can try, (if you can't flash recovery) is to flash again the whole firmware package. But as far as i know you must lock the bootloader for that and i don't know if you can flash the same firmware on the already same installed firmware.
But you have not much options for a S-on device, which don't has a working custom recovery.
A small F.A.Q. to understand things. Not written for k2ul but most likely similar.
Yep I tried another recovery just to be certain. No luck.
Then you should maybe really lock the device and try to flash the firmware.zip.
And maybe then you have more luck with recovery.
OK.
I need to reflash firmware.zip.
To do that I need to relock the bootloader.
To do that I need S-Off.
To do that I need to install and run firewater
To do that I need to get a working adb shell connection.
That doesn't work. The only working connection I have is fastboot. I assume that adb requires the OS to be up and running. This isn't the case.
You can relock your bootloader with fastboot cmd:
Code:
fastboot oem lock
Then you should be able to flash a signed (by HTC) firmware.zip, also when you are S-on.
The firmware.zip you need, you can get here: http://d-h.st/uwh
How to flash, you'll find in the linked FAQ in post #2.
old.splatterhand said:
You can relock your bootloader with fastboot cmd:
Code:
fastboot oem lock
Click to expand...
Click to collapse
Nah doesn't work:
Code:
C:\adt\sdk\platform-tools>fastboot oem lock
...
(bootloader) SD: write failed in CMD25.
(bootloader) [PG_ERROR] htc_pg_part_update(982):
(bootloader) sd_write_sector failed
(bootloader) [PG_ERROR] htc_pg_part_traverse(930):
(bootloader) fn return error
(bootloader) Lock successfully...
(bootloader) mipi_dsi_panel_off
(bootloader) **** This command mode dma test is failed ****
(bootloader) pm8038_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
FAILED (status read failed (Too many links))
finished. total time: 2.283s
C:\adt\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) SD: write failed in CMD25.
OKAY [ 1.228s]
finished. total time: 1.228s
C:\adt\sdk\platform-tools>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 1.140s
Ok, but then i'm sorry, i don't have a idea, whats wrong with your device.
Yeah seems like a hardware issue. It has a cracked screen so maybe that's what caused it. Thanks for the advice anyway.
Pop quiz folks! Has any of you experienced problems with installing a Splash screen using HBoot 2.21? I can't even find which partition it is currently stored on an I checked all 38 of them. Any ideas from you guys?
Sent from my C525c using Tapatalk
---------- Post added at 09:43 PM ---------- Previous post was at 09:29 PM ----------
Disregard..... It's been so long for me that I actually forgot it had to be placed at the root of the external sdcard haha. Oops!
Sent from my C525c using Tapatalk
Hi, first post here and its a plea for help, most probably the same way quite a few people find their way onto here!
My wife has a HTC one mini and it will power on and go straight to the "Fastboot" screen, it does this constantly. if you select restart it ends up in exactly the same place, same with the power button.
The phone had been unlocked with TWRP recovery about 6 months ago. it was flashed with a stock ROM
This has happened before a couple of times but after a couple of restart attempts it fired up normally and went into normal operation, after a little research we started to believe that it had a sticking volume down button, but now no amount of squeezing and resetting will get it to power up this time
If i select to go into recovery the screen goes blank for a split second and comes right back onto the "Fastboot" screen.
When I connect the phone to a computer the phone goes into "Fastboot USB" and the computer beeps to say something has been connected, HTC sync fires up but says no phone is connected.
With the phone plugged into the computer I can use fastboot to see it is connected but adb does not see it:
Code:
C:\adb>fastboot devices
SH3ACWA****** fastboot
C:\adb>adb devices
List of devices attached
C:\adb>
I have tried to reflash the recovery, I have tried CWM TWRP and the Stock recovery but all do this:
Code:
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 800227328 bytes
sending 'recovery' (8572 KB)...
OKAY [ 1.065s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.218s
C:\adb
I have used the command "fastboot oem boot" and this makes the phone show a white screen with the scateboarding androinds in the centre and gives:
Code:
C:\adb>fastboot oem boot
...
(bootloader) [ERR] Cmd18 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) CMD18: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(876): error 2
(bootloader) [DISPLAY_ERR] read sp1 partition fail!!!
(bootloader) [ERR] Cmd17 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD17
(bootloader) CMD17: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(876): error 2
(bootloader) [ERR] Cmd17 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD17
(bootloader) CMD17: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(876): error 2
(bootloader) [ERR] Boot/Recovery image does not exist!!!
OKAY [ 0.407s]
finished. total time: 0.409s
C:\adb>
In case this is of any help:
Code:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.12.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3ACWA*****
(bootloader) imei: 355866056******
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4274mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-871d213f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.230s
I have also tried to fastboot flash a new ROM onto the phone (one that will not wipe the SDcard and all data), this also fails:
Code:
C:\adb>fastboot flash rom mini.zip
target reported max download size of 800227328 bytes
sending 'rom' (36992 KB)...
OKAY [ 2.731s]
writing 'rom'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 8.164s
The rom was from the thread http://forum.xda-developers.com/showthread.php?t=2659109 - I have renamed the zip out of lazyness so there is less to type in CMD prompt!
I have loaded up a FUU and this seems to work, it will recognise and bring up the software number of the phone and bring up the option to update it - I haven't gone through with this as it will wipe all of the SDcard data and this against what I am trying to achieve.
I would like to get access to the phone to extract the data, whether that be by mounting it and getting the data via comuter or getting it working via another method. We have a new Mini 2 as an upgrade for this phone so it does not neccesarily need to work completely.
Any help anyone can give will be greatly appreciated,
It may be a silly idea but have you tried flashing the file without the spaces in the file name? Ie fastboot flash rom_mini.zip (you'd have to change the file name to reflect that obviously), but I've had it happen on my nexus before a recovery just wouldn't flash because of the spaces in the zip's file name. It's worth a shot. If it still fails then I'd look into that signature verification error you're getting.
Have you managed to solve the issue? I in exactly the same situation as you are/were.
I'm having similar issues with a One Mini I got off of Craigslist for $40. For me the biggest issue (as far as I can tell) is that the security is still enabled (S-ON) and it appears you have a similar issue ("security: on" result from your "getvar" command). From what I've found on the forums here flashing the original ROM should bring it back to life (which you tried) but it didn't work for me either. I should mention, HTC drivers installed (of course ), fastboot will recognize it but adb won't.
The bootloader screen for me.
Code:
*** LOCKED ***
M4_UL PVT SHIP S-ON RL
HBOOT—2.22.0000
OS—4.09.631.2
eMMC—boot 1024MB
Jun 23 2014, 13:57:59.0
FASTBOOT USB
etc etc...
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.09.631.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3B1WA*****
(bootloader) imei: 3564820507*****
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5822000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3850mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.553s
A bit of an update with a couple things I've tried. I was thinking that being unable to find my device with adb could be messed up drivers, and found someone else on the forums that had a post precisely about this [http://forum.xda-developers.com/showpost.php?p=60834905&postcount=7]. Using Ubuntu is apparently an option, and as I dual-boot Ubuntu 14.04 LTS and Win7 x64 I figured I would give it a shot. Followed 'jollywhitefoot's' instructions on installing the necessary repositories, and then fastboot and adb. I could detect the device using 'sudo fastboot devices' but adb still wouldn't recognize it ('sudo adb devices'), returning a blank list. I also attempted to install the latest TWRP, to no avail. Perhaps the person who messed up the phone in the first place never enabled USB debugging.
If anyone out there has an idea of what I'm missing here, I would appreciate a little help. If not, I'll keep plugging away and see what else I can find to try. Thanks!
Code:
[email protected]********:~$ sudo fastboot flash recovery /usr/bin/twrp.img
target reported max download size of 800227328 bytes
sending 'recovery' (11460 KB)...
OKAY [ 1.636s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.777s
-- EDIT 1 --
I should add a few details. I've attempted to unlock the phone using HTCdev from both Windows and now Ubuntu and I supposedly get a valid unlock but never do see the bootloader screen change to reflect that (always stays at '*** LOCKED ***'). I'll post one of the sample outputs below.
Code:
[email protected]********:~/Downloads$ sudo fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 800227328 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.155s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.161s
-- EDIT 2 --
I've tried to flash a few different recoveries, in the hope that one would work. Unfortunately I couldn't find the stock recovery anywhere, I'm guessing that would have the highest chance of working. The three I tried were from here [http://forum.xda-developers.com/htc-one-mini/development/mega-index-roms-recoveries-mods-kernels-t2835180]. I also grapped a dmesg dump, it appears that something with the "SD card" (I know the Mini doesn't have one, but that's what it reports it's storage as) is causing problems, though I'm not sure if this is due to a lack of a formatted partition, or rather super-aggressive writes and thus failing memory.
Code:
(bootloader) [6:9:29.394207] fastboot_command:[erase:cache]
(bootloader) [6:9:29.403677]
(bootloader) eMMC Manufacturer ID: 15
(bootloader) [6:9:29.415209] [ERR] Cmd35 polling status timed out, MCI_ST
(bootloader) ATUS: 0x4C0000
(bootloader) [6:9:29.419677] [ERR] sdcc_command: sdcc_poll_status error,
(bootloader) rc: 2
(bootloader) [6:9:29.421825] sdcc_erase, CMD35 fail
(bootloader) [6:9:29.425520] emmc_erase(2704): sd_erase_sector failed!
Buzz84, I think it's apparent now that my problem could be quite different than yours, I shouldn't have opened up your thread again but I originally thought we had very identical problems!
Anyone made any headway here? My One Mini was sitting in a drawer for months and now that my primary phone got stolen, I need it. Same problem as the others. It just goes right to fastboot and refuses to do anything else. Here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.09.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT37G*****
(bootloader) imei: ********
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Side note: Does anyone know how to unlock the bootloader without access to the OS? The HTC unlock token requires access to the OS to confirm via pop up.
Solution found
In case anyone still encounter this problem, here's a solution.
everybody has the same cure which is put the phone into constant boot loop so that in between loops the battery takes a little bit of a charge until eventually it has enough, i sorted mine out by plugging in the phone then wrapping a strong elastic band around the bottom of phone and the power button which will keep the power button pressed and the phone will keep looping until it gets enough charge, once you see the htc logo release the band before it goes into another loop.
Click to expand...
Click to collapse
htc mini loop
Hi to all,i just waste 10 hours looking for solution so for now i dont have no luck. Try it all all for one tool,windroid tool,i try from fast boot to just make small step but NO..... htc mini is stuk in fastboot mode,pc see htc as other device tru cmd -powershell everything i try had eror or remote eror. With windroid and htcdev page i got unlock-bin file and after doing steps when they say that my bootlader is unlock it is not. tru cmd the same with unlock bin file. I dont have idea how to bypass that signature chek. if someone have idea Imglad to hear it.
Hello. I have a problem because I flashed HTC Sensation PG58IMG.zip minimal version for recovery and hboot, not the RUU.
Now I cannot even unlock bootloader needed to flash a recovery file like TWRP.
Code:
fastboot oem get_identifier_token
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Using adb doesn't work at all.
Code:
adb shell
error: no devices found
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH1AWV806609
(bootloader) imei: 359118040549062
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.034s
Looks hopeless.
What do I now?
Has anyone successfully removed the internal memory card? I have the beats audio version.
kgpdeveloper said:
Hello. I have a problem because I flashed HTC Sensation PG58IMG.zip minimal version for recovery and hboot, not the RUU.
Now I cannot even unlock bootloader needed to flash a recovery file like TWRP.
Code:
fastboot oem get_identifier_token
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Using adb doesn't work at all.
Code:
adb shell
error: no devices found
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH1AWV806609
(bootloader) imei: 359118040549062
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.034s
Looks hopeless.
What do I now?
Has anyone successfully removed the internal memory card? I have the beats audio version.
Click to expand...
Click to collapse
you are on S-OFF
you are unlocked
just a flash a custom recovery from fastboot and flash a custom rom
by the way can you boot to the android?
rzr86 said:
you are on S-OFF
you are unlocked
just a flash a custom recovery from fastboot and flash a custom rom
by the way can you boot to the android?
Click to expand...
Click to collapse
I cannot.
Plus, I cannot flash anything.
Code:
fastboot flash zip PG58IMG.zip
sending 'zip' (5333 KB)...
OKAY [ 1.457s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.477s
Or fix the issue.
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
kgpdeveloper said:
I cannot.
Plus, I cannot flash anything.
Code:
fastboot flash zip PG58IMG.zip
sending 'zip' (5333 KB)...
OKAY [ 1.457s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.477s
Or fix the issue.
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Click to expand...
Click to collapse
have you enabled usb debugging mode from settings?
also don't forget to select fastboot from bootloader when you are connecting the device to the pc(in the screen should say fastboot usb)
by the way if you are trying to unlock the bootloader from htcdev site there is no need to because you are on S-OFF
do this ,flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums (important)