{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This rom was compiled by me, Scott.Hart.bti has done the real work!
I am proud to present to you BeanStalk Builds put together by myself. This is a build composed off of the CM builds and i have added alot of features on top of it. So you get speed, stability, and ultra customization ability. Many of the additional code additions came from slim ROM and also Derteufels build and have been modified to work with my current setup. A huge thanks to Derteufel and the Slim ROM guys for their work and dedication. Also a big thanks to everyone involved with CM as that is the building stone in this project. Thanks to skyliner33v for the bootanimation and upcoming wallpapers!
I plan on updating this and adding features on a pretty regular basis, so if you happen to like this, keep checking back.
Like what you see? Click the thanks button or Donate to scott.hart.bti by clicking HERE
Interested in Porting/Building BeanStalk on another device? Check out Post #3!
If you have building/development concerns or issues, Please visit the BeanStalk Development Thread to avoid cluttering this thread.
Features
Coming soon...
Download
ROM:
BeanStalk-5.0025-20150209-ariesve
Old Build
BeanStalk-5.0020-20150119-ariesve
GAPPS:
Download:BasketBuild_Gapps
***Please keep in mind that this is the initial release and bugs are to be expected. I am working on this myself and do not have a team that is helping me. Before reporting bugs, please make sure you verify everything on your end and make sure you do a full wipe and format first to make sure it is a legitimate issue. Im going to say this once and only once... I am doing this for fun. It is my CHOICE to share my work with everyone. If you decide that you do not like my work, good for you.. Move on and flash something else. I will not tolerate ungrateful people in my thread.***
How to install :
Use TWRP. with new partition
Warning: Only use this recovery to flash New build with new partitio layout.0. Otherwise, you risk bricking your phone, or you might experience boot and stability issues!
Wipe data and cache.
Format /system (only first time coning from older recovery)
Format /data and /data/media (only first time coning from older recovery)
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade the since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Sources
SlimROM source can be found HERE
DerTeufel's source can be found HERE
BeanStalk source can be found HERE
Source on Unofficial github
» Device
» Vendor
» Kernel
» audio-caf | display-caf | media-caf
Donate to scott.hart.bti by clicking HERE
Credits:
XDA:DevDB Information
BeanStalk Lollipop, ROM for the Samsung Galaxy S I9000
Contributors
K_TECH, DevConnection_Team, Christopher83
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-01-20
Last Updated 2015-02-09
Unofficial Changelogs
UNOFFICIAL CHANGELOGS
Code:
[B][SIZE="4"]2015/02/09[/SIZE][/B]
-Sync with device tree (Device, Vendor, Kernel)
-425MB of RAM *Christopher83
[B][SIZE="3"]Old Build[/SIZE][/B]
[HIDE]
[B][SIZE="4"]2015/01/19[/SIZE][/B]
-Initial release for ariesve
-Using K^kernel source as stock kernel (416 of ram) by Christopher83
-Remove CellBroadcast from build
[/HIDE]
ANNOYANCES
Code:
[B][SIZE="4"]2015/02/09[/SIZE][/B]
-Tell me please :p
SCREENSHOT
nilac8991 said:
https://www.dropbox.com/sh/ojcfpomavkylop9/AACPkyt9-GAQBjRveRTDP6Mua?dl=0
Click to expand...
Click to collapse
Many thanks to @ahmed dzico for testing it
Hope you guys enjoy this one ^_^
any screenshots please ??
K_TECH said:
[*] Use CWM6.
Click to expand...
Click to collapse
I suppose it contains an error. Please correct if I'm right, because someone could really use a recovery-clockwork-6.0.5.1-ancora.
ze7zez said:
I suppose it contains an error. Please correct if I'm right, because someone could really use a recovery-clockwork-6.0.5.1-ancora.
Click to expand...
Click to collapse
Thanks
OP edited, sorry about that
Man you're awesome ;
Keep it up!
Screenshot please
ichad88 said:
Screenshot please
Click to expand...
Click to collapse
https://www.dropbox.com/sh/ojcfpomavkylop9/AACPkyt9-GAQBjRveRTDP6Mua?dl=0
nilac8991 said:
https://www.dropbox.com/sh/ojcfpomavkylop9/AACPkyt9-GAQBjRveRTDP6Mua?dl=0
Click to expand...
Click to collapse
thanks bro
i'll linking it in the OP
Thans friend
great that people are working on it after all this time
First of all thanks for providing us your awesome work for this old device. I would like to ask cause i am a bit confused witch recovery we have to install and if it is twrp can you provide an other link cause the one you have is an .exe file and it is full of bloat. If it is just cwm then it is really easy to find here on xda. Again thanks for your work, i would like to see my old phone be updated to the latest android version. Thanks in advance.
meriosph said:
First of all thanks for providing us your awesome work for this old device. I would like to ask cause i am a bit confused witch recovery we have to install and if it is twrp can you provide an other link cause the one you have is an .exe file and it is full of bloat. If it is just cwm then it is really easy to find here on xda. Again thanks for your work, i would like to see my old phone be updated to the latest android version. Thanks in advance.
Click to expand...
Click to collapse
Look on the first post, it's everything explained.
nilac8991 said:
Look on the first post, it's everything explained.
Click to expand...
Click to collapse
Thanks for the replay, i have read the thread first but at the comment section they mentioned cwm and that's why i was confused, but anyways i made a mistake cause i was searching for gt-i9000 and this thread is for gt-i9001 and i suppose this will not work on my device. Have fun flashing!!
In the transition to the settings screen , an error ! how to fix it ?
Update!!
UPDATE
Download link First Post
Changelog Second Post
after a clean install after takeoff systems everything will hang and lags
Spluwicho said:
after a clean install after takeoff systems everything will hang and lags
Click to expand...
Click to collapse
I also experienced like that in my device (ancora)... Sorry about that, i'll look on it hope the next build fixed.
Stay tuned
How you set screenshots.. In power menu ??
Thanks for the really great rom..
Sent from my GT-I9105P using xda premium
Related
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
All of our features can be found on our site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our website.
Carbon Downloads
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
Who is Team Carbon?
Find out here:
Carbon Team
Remember, every peny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
ROM Banner
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
CarbonRom, ROM for the Moto E
Contributors
vishal_android freak
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest firmware
Based On: AOSP, CyanogenMod, SlimRom
Version Information
Status: Stable
Stable Release Date: 2014-10-24
Created 2014-10-24
Last Updated 2014-11-03
Changelogs, Instructions, Sources, Credits
Changelogs
Code:
Nightly #2:
-fixed 6 bar signal FC in carbon fibers
-fixed Sim settings FC in dialer settings
Code:
Nightly #1:
- initial build
Bugs?
-None that I am aware of.. You can tell me if you find any..
Instruction for flashing CarbonRom for the first time:
Boot into recovery
take nandroid backup of your current rom (to avoid any mishap)
Wipe data/factory reset, cache and dalvik cache
Flash rom zip and appropriate gapps
Reboot
Instruction for upadting to latest build:
Boot into recovery
Wipe cache and dalvik cache
Flash rom zip
reboot
Sources:
Device Tree
Kernel Tree
Vendor Blobs Tree
Credits:
CarbonRom team
CyanogenMod team
percy_g2
Tsukishiro
Shardul Niphade
percy_g2 said:
GENERAL COMMENT AND REQUEST:
We ask all the regular contributors here to please answer the "xxx is broken" or "yyy force closes" statements without an attached logcat with something like "LOGCAT or it didn't happen"
Feel free to be creative but DO NOT respond with wipe cache/clear data or any other attempted solution before the reporting user has taken the trouble to actually try to help solve the problem (e.g. by attaching a logcat, detailed steps to reproduce etc.).
We need to force more discipline in how issues are reported which will help us all find and squash bugs that may exist.
Just clearing data etc. may in fact cause us to never find the bug that caused the issue and just makes for lazy users.
Click to expand...
Click to collapse
Reserved
Downloading Now, was waiting for this.
[Stable] But Battery Drain Is Quite High.
most awaited rom back again!!
Status: stable!!!!! Hope thats true!! Gonna flash it, the most sleek,smooth and elegant rom!!
Thankful to the new dev!!
I had 2 reboots using the keyboard and using the crhome app. And in Carbon site says it has 100% Portuguese translation, but Carbon Fibers is only in English.
Fails every time wifi is switched off, only works for a moment
I'm trying to make this ROM fail, and fortunately I am unable to do so until now.
The only thing I cannot do so far is to get a lock on the GPS, but I am on Manhattan, so it is hard even on Stock.
I cannot be more grateful with the OP for releasing this ROM.
phone.apk fc on dual sim settings...
AshuGite said:
phone.apk fc on dual sim settings...
Click to expand...
Click to collapse
Get a logcat instead of a screenshot.. I know how a FC window looks.. That's just gona make me understand why or what is causing the issue
vishal_android freak said:
Get a logcat instead of a screenshot.. I know how a FC window looks.. That's just gona make me understand why or what is causing the issue
Click to expand...
Click to collapse
log attatched...
also cm torch is useless app..
Tested on XT1022 . So far no issues stable...
-when applied a theme and again reverting back to default requires a reboot to take affect to see the changes!
All over the rom is stable! In my XT1022
thanks for making carbon rom for us....... but fc in carbon fibers-->statusbar-->general-->enable six bar signal and carbon fibers-->statusbar-->general-->signal status style seems not to working.
attaching log
Which file to download out of the three files?
smith44 said:
Which file to download out of the three files?
Click to expand...
Click to collapse
This one: https://s.basketbuild.com/devs/vishal_android_freak/carbon/condor/
furnace kernel working or not??
Anyone tried the furnace kernel in this rom?? Is it working?? Cuz wen i tried, WIFI dint seem to work!!!
prince trishi said:
Anyone tried the furnace kernel in this rom?? Is it working?? Cuz wen i tried, WIFI dint seem to work!!!
Click to expand...
Click to collapse
Same thing for me. On Spirit and Carbon.
doubt!
SirRhor said:
Same thing for me. On Spirit and Carbon.
Click to expand...
Click to collapse
This rom is based on CyanogenMod, aosp nd slimrom where cm nd aosp built rom r easily compatible wid the furnace kernel but then y not dis!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
About Carbon:
https://carbonrom.org/features/
https://plus.google.com/+Carbon-rom/
Screenshots:
https://carbonrom.org/screenshots/
Sources :
Carbon ROM : https://github.com/CarbonDev
Unofficial Sources :
Device : https://github.com/khusika/android_device_samsung_ariesve/tree/carbon-kitkat
Vendor : https://github.com/AriesVE-DevCon-TEAM/android_vendor_samsung_ariesve/tree/cm-11.0
Kernel : https://github.com/Christopher83/samsung-kernel-msm7x30/tree/cm-11.0
Downloads:
Roms :
CARBON-KK-UNOFFICIAL-20150108-0958-ariesve
Changelog:
Carbon Changelog
Gerrit Code Review
Unofficial Changelog
How to install :
Use TWRP. with new partition
Warning: Only use this recovery to flash New build with new partitio layout.0. Otherwise, you risk bricking your phone, or you might experience boot and stability issues!
Wipe data and cache.
Format /system (only first time coning from older recovery)
Format /data and /data/media (only first time coning from older recovery)
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade the since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
XDA:DevDB Information
Carbon Rom, ROM for the Samsung Galaxy S Plus I9001
Contributors
K_TECH, DevConnection_Team, Christopher83
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-01-09
Last Updated 2015-01-09
Unofficial Changelogs
UNOFFICIAL CHANGELOGS
Code:
[B][SIZE="4"]2015/01/08[/SIZE][/B]
-Initial release for Ariesve
-Use K^kernel source by Christopher83 as default kernel
-New partition layout and switch to emulated storage
ANNOYANCES
Code:
[B][SIZE="4"]2015/01/08[/SIZE][/B]
-Tell me please :p
Enjoy it guys, Thanks to @ahmed dzico for test this rom
And remember, This rom with with New partition layout and switch to emulated storage
K_TECH said:
-Initial release for arisve
Click to expand...
Click to collapse
Thank you for your release, but initial release for ariesve did @educk:
http://forum.xda-developers.com/showthread.php?t=2580070
ze7zez said:
Thank you for your release, but initial release for ariesve did @educk:
http://forum.xda-developers.com/showthread.php?t=2580070
Click to expand...
Click to collapse
educk won't update this rom anymore and this is a stable release
New Ports for an "OLDIE"
ze7zez said:
Thank you for your release, but initial release for ariesve did @educk:
http://forum.xda-developers.com/showthread.php?t=2580070
Click to expand...
Click to collapse
Hi ze7zez,
you are right concerning the initial release, but take in considderation, that this is the initial release for the Carbon ROM based on the new partition structure As i tested the first builds from @educk i will surely test @K_TECH builds as soon as i find the time to see how the new build is working :good: The same is valid for the MoKee build, as far as i remember the early builds suffer from the low memory.
THX K_Tech
Rhonin
Rhonin86 said:
Hi ze7zez,
you are right concerning the initial release, but take in considderation, that this is the initial release for the Carbon ROM based on the new partition structure As i tested the first builds from @educk i will surely test @K_TECH builds as soon as i find the time to see how the new build is working :good: The same is valid for the MoKee build, as far as i remember the early builds suffer from the low memory.
THX K_Tech
Rhonin
Click to expand...
Click to collapse
Hi Rhonin86!
The case has already been explained.
I just wanted to emphasize the participation of previous developers in the popularization of the ROM, since this information was omitted.
Nothing more nothing less.
I hope that no one felt hurt.
Regards.
Why?
This is the best ROM I've found for i9001 in the last couple month.
Why there are so few followers !?
Dear K_TECH , are You going to support the KitKat version or following the trend going to switch on Lollipop wich actually... sucks
good
you are right,
rom is good,
An Tu Tu for me 8889,
only the battery consumption,
K_TECH Thx.....awesome job....
Nar4 said:
This is the best ROM I've found for i9001 in the last couple month.
Why there are so few followers !?
Dear K_TECH , are You going to support the KitKat version or following the trend going to switch on Lollipop wich actually... sucks
Click to expand...
Click to collapse
skakavac65 said:
you are right,
rom is good,
An Tu Tu for me 8889,
only the battery consumption,
K_TECH Thx.....awesome job....
Click to expand...
Click to collapse
Good to know that you like my works, but i think Carbon rom is abandoned look at Carbon Github here, there is no activity
That's why, I focused on the lollipop branch
K_TECH said:
That's why, I focused on the lollipop branch
Click to expand...
Click to collapse
Sorry to hear that.
I understand the motive: Lollipop is "something New" and to work with it is more exciting then dealing with the old stuff.
But isn't ther nothing more to implement into KitKat?
And well. I noticed the really big battery drain in the ROM. Is it in real or it just "seems to me"?
Hi Bro
How to install on 2.3.6 XXKQP ?
please Give me recoverymod Link For Flash rom on this recovery mod
Tnx .
Please DO something
K_TECH, dear!
Please do something for scaring battery life in Your ROM!
I really value the ROM and rate it as The Best for i9003 EVER due to it's user-frendly customization! But battery drain is jast awful! (see att.)
U see Android System and Android OS consuming power extremely!
I hate LP and want to use KK further but the pity is that all devs rushed to the new OS and left 4.4.4 behind.
Please help!
thx
One of the best roms out there, the only big problem is it does not go to deep sleep..
nezhinaw said:
One of the best roms out there, the only big problem is it does not go to deep sleep..
Click to expand...
Click to collapse
Have you checked out, which app / process keeps the phone awake ? You can use BBS or Wakelock-detector....
Depending on the responsible app, you can do sth. by yourself ...
Cheers
Rhonin
S+ i9001
It is realy work on my i9001 great jobs, wayting for updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Resurrection Remix ROM
Changelog
Installation
Downloads and useful links
About Resurrection Remix ROM
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
[font=Verdana, Arial, Helvetica, sans-serif]Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy![/font]
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supportersThanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
Mustaavalkosta
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Installation instructions:
Make sure you have properly converted your device to use aceopt partition layout.
Download Rom
Download gapps from here
Put the files on SD card
Reboot to recovery
Do factory reset (ie. format /system, /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash Rom.zip
Flash gapps zip
Remember to flash boot.img via fastboot if you have S-ON
Reboot and enjoy
Github
Resurrection Remix
Open Desire Project
Kernel
Source: github
Compiler: stock AOSP gcc-4.9
Branch: cm-13.0
Kernel Version: 3.0.101
defconfig: ace_defconfig
Buglist:
* All bugs from CM13 from Mustaavalkosta
* The bootanimation is CM's not RR
Spoiler
teset
hdorius said:
fa
Click to expand...
Click to collapse
rere
Screenshots
Seeing is believing, so you wanted to see a screenshot before you would believe RR is actually running on the Amazing Desire HD.
Well you guess is as good as mine... Enjoy some shots of RR running on the Amazing Desire HD.
Very happy to see new build on our old desire hd but download link required decryption key what is up with that ???
hamxa266 said:
Very happy to see new build on our old desire hd but download link required decryption key what is up with that ???
Click to expand...
Click to collapse
try this
Note: this is my first time build from source,maybe some bugs will occured...
hdorius said:
try this
Note: this is my first time build from source,maybe some bugs will occured...
Click to expand...
Click to collapse
were are aware, but this has got nothing to do with the build from source, Its just that you missed the shareable link.
You have updated it and the link is working. I will post my quick impressions after flashing it.
BTW if you have and can make some screenshots, make them available for first-time users as most isn't aware of the RR ROM.
xdagee said:
were are aware, but this has got nothing to do with the build from source, Its just that you missed the shareable link.
You have updated it and the link is working. I will post my quick impressions after flashing it.
BTW if you have and can make some screenshots, make them available for first-time users as most isn't aware of the RR ROM.
Click to expand...
Click to collapse
Yeah lol,I just use that post to wrote it only...ok will make screenshot later..
hdorius said:
Yeah lol,I just use that post to wrote it only...ok will make screenshot later..
Click to expand...
Click to collapse
I have already made them, you don't have to worry.
wants to find out, any update coming up?
xdagee said:
I have already made them, you don't have to worry.
wants to find out, any update coming up?
Click to expand...
Click to collapse
The latest ROM that I made is bootlooped,so I think maybe need sometime to solve it..will try it this weekend..thank you for the screen shot ?
Nice to see new ROMs for the damn old Desire HD, maybe gonna give it a try soon.
Is this a "stable build", that means i could try to flash it and try some apps etc; its just my old device that isn't in use anymore.
Only things i need is wifi and no random reboots or so, and a good battery life would be nice, too.
So long
ChavezD
hdorius said:
Buglist:
* All bugs from CM13 from Mustaavalkosta
* The bootanimation is CM's not RR
Click to expand...
Click to collapse
Yes vendor/cm of RR source have problem. I delete vendor/cm of RR and move vendor/ of CM to folder build rom. Yes boot anim is CM. I use htc pico
Hello
How to get pure flash this room. Please help me..
Michaello.K said:
How to get pure flash this room. Please help me..
Click to expand...
Click to collapse
What is pure flash?
hdorius said:
What is pure flash?
Click to expand...
Click to collapse
How to flash this rom. I always have error on boot. How do you flash tris rom??? HELP
Delete
Hello, This ROM is compatible with version Desire HD (A9191) and SoftBank (001HT)?
This stable or beta?
Thank you!
Project is discontinued, thread closed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Omni
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Omni is a chance to get involved, no matter who you are. Developers, whether you’ve been developing apps for a week, or ROM features for 3 years, you’re welcome. Users, we know you want to help out, and now you can – Omni actively encourages bug reports and feature requests, which can be added to our publicly accessible roadmap. What’s the point in giving you a ROM, and forcing you to not tell us about any bugs you find?
We also recognise how people use Custom ROMs – we’re all custom ROM users and developers ourselves – the argument that “nightlies are not for end users” is over-used, and no longer valid. We’ve found that the vast majority of users want to get nightly updates to their ROM. For that reason, nightlies aren’t a playground – nightlies are for new features that are finished. You should be able to expect the same stability and reliability from a nightly as you would from a “release” ROM, and can report any bugs that prevent this from happening.
We know not everyone wants to update their ROM daily, and you are free to update as frequently or infrequently as you like. Omni is about flexibility and giving users what they expect – and we are excited to see where the community goes with it.
Downloads:
All builds
Gapps - (use arm64, 7.1 nano/pico)
Firmware [Flash this zip before ROM incase you are coming fro miui]
Bugs
Let me know if you find anything!
How to Root?
Flash SuperSU v2.xx (latest version post 2.78)
http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Flash SuperSU after first boot of the rom(DON'T flash along with ROM and Gapps)
Installation Notes
Its extremely important to backup your current OS prior to installing.
Clean flash instructions:
When coming from either stock or another custom ROM you must preform a clean install.
Boot into custom recovery
Select Wipe/Advanced wipe
Check system, data, dalvik cache and cache (if you select internal you will lose all internal data, so please make sure you have a back up)
Swipe to wipe
Go to install
Select ROM zip add and select your GApps zip
Swipe to flash
Reboot system when complete
Dirty flash instructions:
Boot into custom recovery
Go to Install
Select the updated zip
Swipe to flash
Reboot system when complete
Clear Cache & ART (optional)
Sources
Device (if you are using my commits, I would expect that you give proper credit - cherry-pick and mention in your thread)
Kernel
Vendor
Credits:
Big Thanks to @abhishek987 for device sources :good:
Thank You
Soubhik (sk83) G+
Thanks for all your support. If you like my work and continue to support, hit Thanks and donate.
( Paypal or Scan this Paytm code)
XDA:DevDB Information
omni-mido, ROM for the Xiaomi Redmi Note 4
Contributors
SK83
Source Code: https://github.com/omnirom
ROM OS Version: 7.x Nougat
Version Information
Status: Beta
Created 2017-05-29
Last Updated 2017-09-02
Screens
FAQ
When will it become Official/will it be official ever?
Frankly speaking I don't know at the moment. Once all the bugs solved and device comply with official criteria, I may approach the team to consider mido. Till then NO ETA/NO questions
Great work bro! Hope to see video recording soon
Noice, thanks!
Nice ROM :good:
Video Recording bug fixed!
https://www.androidfilehost.com/?w=files&flid=184200
New build uploaded with F2FS fixes and updated HAL from caf
https://www.androidfilehost.com/?fid=889764386195903588
Awesome ROM... Thanks mate..
Anyone tried how is the build
Hardware button disabler isn't working.
If all other ROMs were to stop and only omni remained, I would still be glade. ??
stable enough to become daily driver?
@SK83 is this ROM gonna be official???
vishal1404 said:
Hardware button disabler isn't working.
Click to expand...
Click to collapse
Yes, I have noticed it.. will fix it in next build..
lineoxkun said:
stable enough to become daily driver?
Click to expand...
Click to collapse
Yes, I have personally using it from past week.. everything is working fine.. flash the latest build..:good:
nicks.1106 said:
@SK83 is this ROM gonna be official???
Click to expand...
Click to collapse
Hopefully, but will take some time.. :fingers-crossed:
lineoxkun said:
stable enough to become daily driver?
Click to expand...
Click to collapse
This is definitely a stable rom to be used.... smoothest rom out there!
Thanks for the ROM
Extremely smooth ROM as mentioned above as well, scrolling is smooth as silk
One question, will there be a way to disable the second sim card?
OMS support ????
HaiderHady said:
OMS support ????
Click to expand...
Click to collapse
Yes
---------- Post added at 06:32 PM ---------- Previous post was at 06:32 PM ----------
ugene1980 said:
Thanks for the ROM
Extremely smooth ROM as mentioned above as well, scrolling is smooth as silk
One question, will there be a way to disable the second sim card?
Click to expand...
Click to collapse
Don't insert the second sim card lol
Is it better than LOS 14.1(7.1.2)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Glaze OS is a free, open-source, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. It offers features not found in the official Android based firmwares of vendors.
Installation Instructions :
1. Download ROM and Copy it to your SD card or Internal Storage (Links in 2nd Post)
2. Reboot to Custom Recovery (Try RedWolf )
3. Take Backup of Existing ROM
4. Install ROM ZIP
5. Install GApps (ARM64 -> 7.1 -> Choose anyone pico or aroma)
6. Flash Latest Firmware (Optional)
7. Wipe Cache & Dalvik & Data (without Internal Storage)
8. Reboot
How to Enable FIngerprint Selfie :
You can follow this Guide to enable Fingerprint Selfie. For easy i made a ZIP file. Download it and flash from recovery (don't forget to wipe cache & dalvik) (download link in 2nd post)
Bugs : You tell me... ;-)
Again my another ROM Build on TeamMex and AQSD Sources...
Thanks to :
@TeamMex, @daniel.stuart14 - For Kernel, Device, Vendor Trees...
@Swapnil Soni - He helped me a lot... Personally
Android ROM Developer's Talk Telegram Group Members - Helped me to learn...
GlazeOS Team - For this ROM
And all others who helped.....
Sources :
ROM
Device
Kernel
Vendor
XDA:DevDB Information
GlazeOS, ROM for the Xiaomi Redmi 3S
Contributors
dineshthangavel47, dineshthangavel47, TeamMex, daniel.stuart14, nichcream
Source Code: https://github.com/GlazeOS/manifest
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lastest MIUI Firmware
Based On: AOSP
Version Information
Status: Testing
Created 2017-10-01
Last Updated 2017-10-08
Downloads
ROM
Download From Here : AndroidFileHost
Fingerprint Selfie Patch :
Installer - Enable Fingerprint Selfie
Uninstaller - Disable Fingerprint Selfie
20171001-0757 - Initial Build (Unstable)
20171006-1601 - Test Build
20171007-0756 - Fixed com.android.phone crashing. (Last build on AQSD kernel)
20171007-0816 - Changed to @nichcream kernel.
20171008-1206 - Nothing Special
20171009-1436 - Added Vulkan API. Enjoy Gaming...
Appreciate your effort.
At the same time, a small suggestion.. Don't take it wrongly..
Please don't fall into the trap of publishing multiple distributions without doing complete justice to any one of them..
(I know I'm no body to tell some one else what to do.. Just a message in the right spirit)
Thank you,
Falcon_fan said:
Appreciate your effort.
At the same time, a small suggestion.. Don't take it wrongly..
Please don't fall into the trap of publishing multiple distributions without doing complete justice to any one of them..
(I know I'm no body to tell some one else what to do.. Just a message in the right spirit)
Thank you,
Click to expand...
Click to collapse
Yes I know bro. I'm not releasing multiple roms for publicity or increase my thanks meter. I'm learning Android Development and Senior Developers adviced me to first compile multiple roms and gain some experience and then learn to fix bugs. Then learn to start everything from scratch. So only I'm compiling multiple roms. And I faced different problems, bugs, errors in each rom which taught me a lot.... Thanks for your advice and I will keep it in mind
Good Attitude! Thank you!
Maybe a bunch of screenshots? About main features, and differential from other roms? Good Job anyway ?
Screenshots could be done ?
Great ROM, but I get FC on com.android.phone and then signal lost and it's repeating after signal shown. Looking forward on this ROM, because it's looks great since moved from Tesla.
whitefox9000 said:
Great ROM, but I get FC on com.android.phone and then signal lost and it's repeating after signal shown. Looking forward on this ROM, because it's looks great since moved from Tesla.
Click to expand...
Click to collapse
Working on fix... Wait for next build
dineshthangavel47 said:
Working on fix... Wait for next build
Click to expand...
Click to collapse
sure! I'll waiting until it's stable and not having much problem for daily usage
dineshthangavel47 said:
Working on fix... Wait for next build
Click to expand...
Click to collapse
whitefox9000 said:
sure! I'll waiting until it's stable and not having much problem for daily usage
Click to expand...
Click to collapse
New Builds are up... Fixed com.android.phone FC... Enjoy.... (I like this rom specially for it bootanimation )
dineshthangavel47 said:
New Builds are up... Fixed com.android.phone FC... Enjoy.... (I like this rom specially for it bootanimation )
Click to expand...
Click to collapse
Thanks
Awesome... Rom is pure and feels so awesome .. nice work
Swapnil Soni said:
Awesome... Rom is pure and feels so awesome .. nice work
Click to expand...
Click to collapse
Thanks
some ss will be apriciated
ROM Updater with Vulkan API.
Stuck
Hey, i always get this error message "E: Unknown Command [log]" twice. What does that mean?
and i always stuck at the MI Logo.
Can you please help me?
Thanks.
If i play game, the charging stat always become not charging, please fix it.
Thanks for good rom