Hi all,
I'm new to the XDA-Dev Forums... and i'm desperate :crying: .
I recently purchased a Measy B4K android TV-Box / Stick. I want to upgrade this to at least android 4.2.2 or 4.3 if possible as it came with 4.1.1, but I cant find any custom roms for this product anywhere. It's supposed to support up to 2160p output, but for some reason even if i set it to a 1080p display setting it still looks like its just upscalling from 720p. Would really like to get a true 1080p kernel on the device.
Is it possible to use a "Generic" 4.2.2 or 4.3 android build? I unfortunately don't have a lot of experience with custom rom builds or installations, but i really want to learn if ANYone can assist I would REALLY appreciate it so so much!
i know this an old thread but i'll answer anyway as we just found some intresting stuff & upgrade that helps a lot
also to be sure it's this a31 device we have and i'm guessing your talking about the same thing : http://www.measy.com.cn/product/showproduct75_en.htm
not a custom rom but we've gotten hold of a developpers 4.2.2 RC3 firmware for measy b4k. We had trouble getting installed but another person found a way to do it. You need phoenixcard 3.09 (http://www.freaktab.com/showthread....S918S-firmware&p=131526&viewfull=1#post131526)
this rom https://alimail.alibaba.com/alimail...eb961&[email protected]
burn the rom as product using phoenixcard, install terminal app, erase nanda then, insert phoenix burned sdcard in measy b4k box, reboot. because the boot is gone (nanda) it will try to boot from sd card and start the firmware upgrade the normal methods using the hidden reco button on the left did not seem to work. but this did, i did as well as someone else.
To give you an idea with original firmware that came with the device i had around 10000 - 11000 antutu score with this dev build firmware i have 19000 antutu score and everything feels a lot smoother & faster.
1st succes upgrade
http://www.freaktab.com/showthread....S918S-firmware&p=132832&viewfull=1#post132832
how to erase nanda on it
http://www.freaktab.com/showthread....S918S-firmware&p=132947&viewfull=1#post132947
do note if you fail at doing something but you erased nanda your device will not boot ! it's a bit risky but worked without a problem with me
Thanks for the info!
Enviado desde mi Lenovo A820 usando Tapatalk 2
Guys,
I'm trying to make a port for CM11 , CM10 or anything to mobile phone Galaxy S Duos - S7562 -L because we have no other developer doing anything for this device and decided by the hands in the dough , I have knowledge in linux and a little programming , have experience in iT for 10 years and want to risk , however could not follow the official tutorials Cyanogem and Google ... always end up with an error that I can not find anything .
1 - My first doubt is whether it is possible to perform the port , it is strange no one has yet tried a port of anything except the kyleopen that eh original rom with just a few additions script and deletion of apps from Samsung . It is possible to perform this port ? Developers have achieved the grand duos , so I believe it is possible also to my device .
2 - it is possible to perform another port using the stock rom sansung , Galaxy Young Duos (with android 4.2.1 ) is very similar to S duos ( stuck in 4.0.4 ) in terms of hardware but not seen anything about how to accomplish this type of port anywhere , extracts the / system and did some comparisons but it does not know how to package and flash , since the packages that depend on ODIN I have to work . ( listed on the site SAMMOBILE.com )
3 - The phone is with root access , and also with cwm 5 installed , however when I go into FlashBoot mode, it can not find the device , but adb is working properly ... need to do something before accessing the boot flash samsung for this unit ?
I apologize for the questions , however I researched a lot and have installed linux on my pc at the moment for countless attempts and so far always resulted in failure , I 'm not going to give up so easily , however I must be missing something ... this phone does not have any version ever home so most of the tutorials are not intended for me , as well as those I found to use the power fail at the time of fastboot , as some failures occur at compile time , believe they are incomplete .
Thanks in attention , hope to enlist the help of the community , if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it Thanks in attention, hope to enlist the help of the community, if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it.
(I ended up getting with this unit because I gave my wife a gift, not score as longer stand to hear her complaining of lockups, unable to make calls, slowness ... and all claims that I believe that all users of this device have already done, I my turn to give her another device, a D3 motorola ... and this is making her happy: D, I still put this curse on to with my hand .. lol)
Heeeeeeelp anyone ...
Enviado de meu GT-S7562L usando Tapatalk
alooooone
!blackram said:
Heeeeeeelp anyone ...
Enviado de meu GT-S7562L usando Tapatalk
Click to expand...
Click to collapse
acho q estou sozinho mesmo .... U_U:crying:
...:silly:
mais um
!blackram said:
Guys,
I'm trying to make a port for CM11 , CM10 or anything to mobile phone Galaxy S Duos - S7562 -L because we have no other developer doing anything for this device and decided by the hands in the dough , I have knowledge in linux and a little programming , have experience in iT for 10 years and want to risk , however could not follow the official tutorials Cyanogem and Google ... always end up with an error that I can not find anything .
1 - My first doubt is whether it is possible to perform the port , it is strange no one has yet tried a port of anything except the kyleopen that eh original rom with just a few additions script and deletion of apps from Samsung . It is possible to perform this port ? Developers have achieved the grand duos , so I believe it is possible also to my device .
2 - it is possible to perform another port using the stock rom sansung , Galaxy Young Duos (with android 4.2.1 ) is very similar to S duos ( stuck in 4.0.4 ) in terms of hardware but not seen anything about how to accomplish this type of port anywhere , extracts the / system and did some comparisons but it does not know how to package and flash , since the packages that depend on ODIN I have to work . ( listed on the site SAMMOBILE.com )
3 - The phone is with root access , and also with cwm 5 installed , however when I go into FlashBoot mode, it can not find the device , but adb is working properly ... need to do something before accessing the boot flash samsung for this unit ?
I apologize for the questions , however I researched a lot and have installed linux on my pc at the moment for countless attempts and so far always resulted in failure , I 'm not going to give up so easily , however I must be missing something ... this phone does not have any version ever home so most of the tutorials are not intended for me , as well as those I found to use the power fail at the time of fastboot , as some failures occur at compile time , believe they are incomplete .
Thanks in attention , hope to enlist the help of the community , if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it Thanks in attention, hope to enlist the help of the community, if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it.
(I ended up getting with this unit because I gave my wife a gift, not score as longer stand to hear her complaining of lockups, unable to make calls, slowness ... and all claims that I believe that all users of this device have already done, I my turn to give her another device, a D3 motorola ... and this is making her happy: D, I still put this curse on to with my hand .. lol)
Click to expand...
Click to collapse
You can install cm11, cm10.1 and cm10.2 on s duos which is actually built for galaxy ace 2x. Only problem is that the build has a long list of bugs, and both the sim card slots don't work as the build is for a single sim device. Instead of building from scratch why don't you just modify ace 2x rom so that atleast one of the sim card slot works.
Nikhil...007 said:
You can install cm11, cm10.1 and cm10.2 on s duos which is actually built for galaxy ace 2x. Only problem is that the build has a long list of bugs, and both the sim card slots don't work as the build is for a single sim device. Instead of building from scratch why don't you just modify ace 2x rom so that atleast one of the sim card slot works.
Click to expand...
Click to collapse
Nikhil ... 007, I appreciate the information and I will start working on the rom for now, hope to have success in the making, I really think it will be simpler q trying to update, because I tried several times to make from scratch and have not had any success in the attempt which made me to be discouraged.
Thanks for this new breath if I get some functional thing u will be the first to know !!! :highfive::good:
!blackram said:
Nikhil ... 007, I appreciate the information and I will start working on the rom for now, hope to have success in the making, I really think it will be simpler q trying to update, because I tried several times to make from scratch and have not had any success in the attempt which made me to be discouraged.
Thanks for this new breath if I get some functional thing u will be the first to know !!! :highfive::good:
Click to expand...
Click to collapse
Best of luck!!!!:good::highfive:
So, which one are you gonna work on CM 11 or CM 10???
HEY WELL IVE FLASHED CM 11 ON S DUOS AND FOUND NO POSSIBLE WAY TO FIX NETWRK ISSUE NOW
but ony network is not only issue u got no blue tooth and camera is always rotated we will fix those soon hope so :angel::angel::angel::angel:
Guys any progress?
Hello,
With the recent Android M coming out soon, I wanted to try to find a custom ROM to flash onto my Android Phone. It's the VeryKool Sparks II s5015. However, being as it's not very much supported, I'm having issues finding ROM's etc for Lollipop custom builds. Does anyone have any idea's where I could get one? Or what? CM 12 doesn't appear to be compatible.
hey bro, your phone it's compatible but there are no developers working on your specific device, thats the reason for that you can't find a ROM... Whatever your phone have MTK Chipset, install cpu-z app from playstore and see what model is. example mine device is mt6572. when you sure know your device chipset can download custom rom from here: http://_www.mtkroms.com_/ and here: http://_www.mtkcrom.blogspot.com_/ (delete the "_" on URL) obviously you have to ported first for your device, but don't worry, there are tutorials on the pages.
finally sorry for my bad english and... do all things at your own risk, if i helped you click the "thanks" button
Hello everyone I recently bought the budget smartphone wich is not actually that bad I also rooted it with a pre-rooted stock rom but it actually is the original touchwiz wich is ........ well touchwiz it gets slow after a week of using the phone I also installed TWRP on it wich works perfect. I also found alot of links on google claiming that they got a custom rom for the j100h (btw yeah this is the model i own) especially lollipop but all the links i found use surveys and they say that there is no survey available for your country (I live in Europe Kosova to be exact) if they are real could somebody please make a mirror or send me it (somehow), but I got the GenNxt pre-rooted stock if it helps I do not think that there are any custom roms for this device (not yet) I saw that the creator of the TWRP for the j1 said that he is building one (cm12 to be exact) but I do not think that he would be able to create it ( maybe he can I hope he can) if anyone could create a custom rom for this device I would be happy if it would be cm12 (lollipop) I just need to get rid of touchwiz it's way to laggy (I do not have any experience building roms (if it helps to know).
Please reply ASAP. Timidms
Thread closed / Answered in the other thread.
Hello, FDA people.
I've got a YEZZ 5.5 M LTE VR which, in a few words, has disappointed me. I'd like to know just a few things, if you can help me:
- I compared it to a Xiaomi Redmi Note 3, and they're very similar, so I was wondering if I could use a customized ROM for that device (The Xiaomi one. I doubt there are any custom roms for the 5.5M)
- Can I install a customized ROM for a phone that is not the one it was designed for?
- I've already rooted the phone, but I haven't gone any further due to fear of hard brick
- I'm not in a position of buying a new phone at the moment
Any help will be much appreciated.
Thank you in advance.
Hi !
If a device has some similar hardware to another this doesn`t mean that you can flash a rom from one to another , it will brick it , don`t even think about it , do a proper research before proceeding to anything
There is no custom rom available for this device here on xda , you can ask here https://forum.xda-developers.com/android/help but don`t put your hopes to high , not all devices can have a custom rom
Cheers !