Related
Before I go any further, I just want to make it clear that I only PORTED this ROM to the Onda V919 3G Air (NOT for the dual boot version, but Android version only). The original creator Lepi did a wonderful job creating this ROM for the Cube Talk 9x and gave me his blessing to share it. I simply ported it over for our device, ironed out a few compatibility issues, and added a few things here and there.
That being said, I nor Lepi or anyone else will not be held responsible for your device being damaged in any way. Lets get the Onda v919 a bit more ROM love
Special thanks go to:
•Lepi for creating the ROM (original thread here)
•RekGRpth for mods, recipes, and testing
•Alexey for mods, recipes, and testing
•arsenev for mods, recipes, and testing
•cherva70 for mods, recipes, and testing
•Graevka for mods, recipes, and testing
•FatuRe for mods, recipes, and testing
•the_vanya1 for mods, recipes, and testing
•Slimhouse for mods, recipes, and testing
•grisha84 for mods, recipes, and testing
•Paget96 for his great LSpeed Revolution mod (thread here)
Known Bugs:
You tell me
Changelog (based on KitKat 4.4.2 and unofficial 2.0 ROM Cube Talk 9x release from December 2014):
•Fully deodexed
•ROOT by default Superuser app from Clockworkmod
•Removed all software in Chinese
•Modified boot.img
•Init.d support via busybox
•USB debugging enabled on first boot
•Added the ability to display the traffic in the status bar settings by color and off as needed. Keep in mind that color settings of texts in the status bar is only possible in portrait mode.
•Added a setting density screen for those wishing to increase the size of the entire display at the touch of a button.
•By default, the check box is turned on Unknown sources in Settings \ Security for the convenience of a quick recovery applications via Titanium.
•Black and Customizable gestures now in the bright subject.
•Round avatars in contacts and SMS.
•Implemented 3Minit Battery Mod (found under Display settings)
•Lowered minmum manual brightness of the display to 4% and auto brightness level
•Modified file platform.xml for full access to memory card
•Improved user interface firmware forbetter readability
•Returned to stock status bar settings
•Implemented system application in font chooser settings to change font
•Implemented development niorix flash drives to mount NTFS file system
•Implemented animation notifications in status bar. Thanks to Slimhouse and grisha84 for recipes, and cherva70 for the help
•USB connection now has button instead of doing Tap on the picture. Thank grisha84 for the recipe
•When you start the dialer in white topic immediately opens the numeric keypad to dial. Thanks lekha1980
•Changed power_profile in the hope of correct statistics for battery discharge.
•Turned off the default Power Saver Mode. To enable it you need to uncheck the check box. After rebooting daw back. That is exactly the opposite against stock options. The idea of user CatB. His test was successful.
•Removed mourning triangles on the avatars of contacts
•Removed annoying BEEP when you press the volume rocker
•Settings \ For developers introduced Engineering menu and test menu
•Changed the white theme. Made design a la Lolipop.
•Implemented management applet folder init.d, ie system tweaks based on scripts. Thank grisha84 for the recipe
•Introduced function to remove all recently opened applications. Thanks Alexey arsenev
•Stock radio replaced the radio from Lenovo. Thank Joker2010 finder and aid in the treatment of this application bugs
•Changed icons and many system applications
•Preinstalled Android L Keyboard
•Implemented library against stuttering sound when online viewing. Thanks to everyone who participated in this patch
•Ability to disable system applications in the Settings \ Applications. Thanks for the recipe RekGRpth.
•Change style icons Android L
•Screenshot and screen record in Power Menu. Thanks for the recipe Alexey arsenev and cherva70 for troubleshooting
•Blocking in the Preferences, the application AdAway. Thank you for the idea Graevka
•Light theme settings in Google aссoun
•Sound unlock additional tab in the Preferences. Thank FatuRe for the recipe
•Mode multiuser for 5 people.
•Returned undeservedly forgotten flashlight.
•Traffic in the status bar. Thank the_vanya1 for manual
•Animation notification with customizable animation. Thanks grisha84 for the recipe
•Changed default language to US English on first boot (Dai323)
•Added stock boot animation (Dai323)
•Added Nova Launcher as default (Dai323)
•Added Numix Material icons (activate them in Nova Settings under “look and feel-icon theme” (Dai323)
•Added Material Wallpaper (Dai323)
•Preloaded Xposed Installer (Dai323)
•Preloaded LSpeed Revolution mods from Paget96 (preloaded by Dai323)
•Added modded gps.conf (Dai323)
•Fixed broken Bluetooth caused by incompatibility issues with Cube Talk 9x (Dai323)
•Fixed broken camera caused by incompatibility issues with Cube Talk 9x (Dai323)
L Speed Revolution (Paget96) can all be found on the original thread here. You can activate and pick the scripts you want to use by opening Terminal emulator, typing “su”, and then “LS”. From there, pick the scripts you want to activate.
Download and installation instructions:
1.Download the ROM from Mega here, and put it on sd card (internal or external ok, but I recommend external).
2.MAKE A NANDROID BACKUP.
3.Full wipe from custom recovery.
4.Flash ROM.
5.Optional – Install PA Full Gapps or smaller (don’t install stock, as it breaks camera) from here directly after flashing ROM in recovery. If you do this, you will need to go into Language and Input and manually choose Android L keyboard to have a working keyboard. Otherwise, Voice Input is on by default. If you don’t flash Gapps, Google Keyboard is preloaded.
6.Reboot and enjoy.
While there are many Lollipop themed elements in the ROM, some things aren’t themed, which made me find ways to tweak the theme.
Here’s a short video of the stock theme:
https://www.youtube.com/watch?v=C5FiJeyimDs
And here’s a clip of the same ROM after I added Monster UI Xposed module:
https://www.youtube.com/watch?v=hZnQI0U_FuA
There are quite a few dark on dark issues should you choose to use the module, but for the most part it looks very smooth. This is a matter of personal taste, which is why I didn’t preinstall the module in the ROM.
If you want your theme to look like mine, do the following:
1. Activate Numix icons
2. Turn on “Card Background” in Nova settings under “App and Widget Drawer”.
3. Install Xposed Module “Monster UI” and reboot (it will now apply the theme and look as mine did in the video).
4. Clock widget is free on Play Store (Minimal Clock is the name of the app).
5. Battery widget requires XWidgets (free) and to download “Pure Battery Info “widget” within the app (also free).
6. Quote widget is Bhanu Quote widget.
Enjoy Lepipop
how to enable multiwindows?
Help please
Dai323 said:
Before I go any further, I just want to make it clear that I only PORTED this ROM to the Onda V919 3G Air (NOT for the dual boot version, but Android version only). The original creator Lepi did a wonderful job creating this ROM for the Cube Talk 9x and gave me his blessing to share it. I simply ported it over for our device, ironed out a few compatibility issues, and added a few things here and there.
That being said, I nor Lepi or anyone else will not be held responsible for your device being damaged in any way. Lets get the Onda v919 a bit more ROM love
Special thanks go to:
•Lepi for creating the ROM (original thread here)
•RekGRpth for mods, recipes, and testing
•Alexey for mods, recipes, and testing
•arsenev for mods, recipes, and testing
•cherva70 for mods, recipes, and testing
•Graevka for mods, recipes, and testing
•FatuRe for mods, recipes, and testing
•the_vanya1 for mods, recipes, and testing
•Slimhouse for mods, recipes, and testing
•grisha84 for mods, recipes, and testing
•Paget96 for his great LSpeed Revolution mod (thread here)
Known Bugs:
You tell me
Changelog (based on KitKat 4.4.2 and unofficial 2.0 ROM Cube Talk 9x release from December 2014):
•Fully deodexed
•ROOT by default Superuser app from Clockworkmod
•Removed all software in Chinese
•Modified boot.img
•Init.d support via busybox
•USB debugging enabled on first boot
•Added the ability to display the traffic in the status bar settings by color and off as needed. Keep in mind that color settings of texts in the status bar is only possible in portrait mode.
•Added a setting density screen for those wishing to increase the size of the entire display at the touch of a button.
•By default, the check box is turned on Unknown sources in Settings \ Security for the convenience of a quick recovery applications via Titanium.
•Black and Customizable gestures now in the bright subject.
•Round avatars in contacts and SMS.
•Implemented 3Minit Battery Mod (found under Display settings)
•Lowered minmum manual brightness of the display to 4% and auto brightness level
•Modified file platform.xml for full access to memory card
•Improved user interface firmware forbetter readability
•Returned to stock status bar settings
•Implemented system application in font chooser settings to change font
•Implemented development niorix flash drives to mount NTFS file system
•Implemented animation notifications in status bar. Thanks to Slimhouse and grisha84 for recipes, and cherva70 for the help
•USB connection now has button instead of doing Tap on the picture. Thank grisha84 for the recipe
•When you start the dialer in white topic immediately opens the numeric keypad to dial. Thanks lekha1980
•Changed power_profile in the hope of correct statistics for battery discharge.
•Turned off the default Power Saver Mode. To enable it you need to uncheck the check box. After rebooting daw back. That is exactly the opposite against stock options. The idea of user CatB. His test was successful.
•Removed mourning triangles on the avatars of contacts
•Removed annoying BEEP when you press the volume rocker
•Settings \ For developers introduced Engineering menu and test menu
•Changed the white theme. Made design a la Lolipop.
•Implemented management applet folder init.d, ie system tweaks based on scripts. Thank grisha84 for the recipe
•Introduced function to remove all recently opened applications. Thanks Alexey arsenev
•Stock radio replaced the radio from Lenovo. Thank Joker2010 finder and aid in the treatment of this application bugs
•Changed icons and many system applications
•Preinstalled Android L Keyboard
•Implemented library against stuttering sound when online viewing. Thanks to everyone who participated in this patch
•Ability to disable system applications in the Settings \ Applications. Thanks for the recipe RekGRpth.
•Change style icons Android L
•Screenshot and screen record in Power Menu. Thanks for the recipe Alexey arsenev and cherva70 for troubleshooting
•Blocking in the Preferences, the application AdAway. Thank you for the idea Graevka
•Light theme settings in Google aссoun
•Sound unlock additional tab in the Preferences. Thank FatuRe for the recipe
•Mode multiuser for 5 people.
•Returned undeservedly forgotten flashlight.
•Traffic in the status bar. Thank the_vanya1 for manual
•Animation notification with customizable animation. Thanks grisha84 for the recipe
•Changed default language to US English on first boot (Dai323)
•Added stock boot animation (Dai323)
•Added Nova Launcher as default (Dai323)
•Added Numix Material icons (activate them in Nova Settings under “look and feel-icon theme” (Dai323)
•Added Material Wallpaper (Dai323)
•Preloaded Xposed Installer (Dai323)
•Preloaded LSpeed Revolution mods from Paget96 (preloaded by Dai323)
•Added modded gps.conf (Dai323)
•Fixed broken Bluetooth caused by incompatibility issues with Cube Talk 9x (Dai323)
•Fixed broken camera caused by incompatibility issues with Cube Talk 9x (Dai323)
L Speed Revolution (Paget96) can all be found on the original thread here. You can activate and pick the scripts you want to use by opening Terminal emulator, typing “su”, and then “LS”. From there, pick the scripts you want to activate.
Download and installation instructions:
1.Download the ROM from Mega here, and put it on sd card (internal or external ok, but I recommend external).
2.MAKE A NANDROID BACKUP.
3.Full wipe from custom recovery.
4.Flash ROM.
5.Optional – Install PA Full Gapps or smaller (don’t install stock, as it breaks camera) from here directly after flashing ROM in recovery. If you do this, you will need to go into Language and Input and manually choose Android L keyboard to have a working keyboard. Otherwise, Voice Input is on by default. If you don’t flash Gapps, Google Keyboard is preloaded.
6.Reboot and enjoy.
While there are many Lollipop themed elements in the ROM, some things aren’t themed, which made me find ways to tweak the theme.
Here’s a short video of the stock theme:
https://www.youtube.com/watch?v=C5FiJeyimDs
And here’s a clip of the same ROM after I added Monster UI Xposed module:
https://www.youtube.com/watch?v=hZnQI0U_FuA
There are quite a few dark on dark issues should you choose to use the module, but for the most part it looks very smooth. This is a matter of personal taste, which is why I didn’t preinstall the module in the ROM.
If you want your theme to look like mine, do the following:
1. Activate Numix icons
2. Turn on “Card Background” in Nova settings under “App and Widget Drawer”.
3. Install Xposed Module “Monster UI” and reboot (it will now apply the theme and look as mine did in the video).
4. Clock widget is free on Play Store (Minimal Clock is the name of the app).
5. Battery widget requires XWidgets (free) and to download “Pure Battery Info “widget” within the app (also free).
6. Quote widget is Bhanu Quote widget.
Enjoy Lepipop
Click to expand...
Click to collapse
Hi,my same model onda is stuck in the boot mode green icon, would you have any firmware to get it back to life and maybe some info on how to use it. thanks
link
horse77 said:
Hi,my same model onda is stuck in the boot mode green icon, would you have any firmware to get it back to life and maybe some info on how to use it. thanks
Click to expand...
Click to collapse
ps link has been removed,could you help.
I still got the ROM somewhere around.
First flash this zip file with CWM for a 6GB app partition:
http://www.mediafire.com/file/zvq4ngg4x2yo5bt/partition_6gGIG.zip
Then flash the ROM:
https://drive.google.com/file/d/1_J5tcRBNcn6dayph-zRnwvxg1lOUMlKN
Mirror: http://www.mediafire.com/file/c5o0uo49tmmdybc/Lepipop Onda V919 V1.zip
I know is a dumb question but, Is it possible to show the download speed when downloading? Cyanogenmod roms have this feature but I wonder if I can add that feature to a custom rom. I have a nexus 5 running cataclysm 6.0.1
Try this:
Network Monitor Mini - https://play.google.com/store/apps/details?id=info.kfsoft.android.TrafficIndicator
I have the Pro version, which I think adds a few more customisation options such as the positioning of the up/down figures in the middle of the status bar, which is very convenient. It can be widely configured - position, text size, colour, no show when inactive, etc. I'm very happy with it.
Edit: added screenshot. The up & down figures can be configured to have U & D in front of them - I don't have that option enabled.
Or you can install Xposed and a module that adds a very neat indicator in the status bar - it's called Network Speed Indicator.
Thanks for your replies. I found another custom rom with this feature :good:
MiuiPro rom (based on Chinese rom) work on op3 and op3t
Features of MiuiPro ROMs
Code:
- assembled on the basis of Chinese firmware
- translation languages - Russian, Belarusian, Ukrainian, English, Turkish, Chinese
- own firmware and patch repository
- cut out excess Chinese applications
- optimized system resources and power consumption
- the minimum required for Google services
- extended reboot menu
- M8 weather app with an extended widget and source package
- author's wallpaper, themes and styles of design
- root-rights in the drain, integration of SuperSu
- init.d support
- busybox
- tweaks build.prop
- Keyboard Sony Xperia as the main keyboard
- independent settings
- extended desktop settings (on / off shadows, captions, reflection icons, automatic closing of folders, gestures on the desktop with the ability to choose their own applications for them)
- a modified stock dialer and the application "Phone" (the ability to turn on the maximum screen backlight when you call and configure the action after the end of the call)
- setting the time before selecting a SIM card before making a call
- possibility to activate full-screen photo when calling
- Photo caller default settings - providing photo selection (in normal mode - without full screen)
- the ability to select the default photo when calling
- the ability to hide / show the search bar, "My profile" and "Groups" in contacts and ringing
- call recording quality settings
- flashlight blinking settings when making a call
- advanced settings for network type selection
- smart mobile network - SmartNET
- setting the network type when making a call
- Set the network type when you turn on Wi-Fi
- connection timers
- advanced battery indicator settings
- fixed the notification count on icons
- possibility of on / off. sound when you connect and disconnect the charger
- the ability to manually select the color of the LED from the palette
- various styles of the status bar
- separate ring volume and notifications in the pop-up window
- possibility of on / off. screen when connecting / disabling. charger
- the ability to set the color of the percent text (own, gradient, default)
- the ability to hide / show icons in the status bar
- the view of the switch panel when the curtain is opened (in the joint mode)
- the ability to hide / show the brightness panel in the curtain
- the ability to hide / show the search bar in the curtain
- the ability to hide / show the weather in the blind
- Ability to show LTE icon instead of 4G
- a pop-up message was disabled when selecting the "3G only"
- the ability to install your application to hold the function keys
- endless scrolling of desktops
- camera tweaks (shooting modes, 4K and shooting with the screen off, noise reduction, etc.)
- enable / disable vibration when unlocking with a fingerprint
- setting the number of switches in the curtain
- customize the animation of pop-up notifications
- Yandex search in the browser
- gestures anywhere on the screen with the ability to assign any actions to them
- animation and interpolation of lists (visual effects)
- sound delivery report sms
- screen off animation
- inclusion of rounded corners of the screen
- A-GPS settings
- switching tracks with volume buttons
- FaceID (only for devices with 64-bit processor architecture)
- Assigning your application to a combination of buttons
- weather widget in personal assistant
- and much more…
MiuiPro ROMs is installed on unlocked (not locked) bootloader
How to install:
1. If you go from the official ROM or you have a DATA partition encrypted, then we make the FORMAT section data
2. If you switch from the ROM of other localizers, then we make WIPE selected partitions (Delvik / ART Cache, Cache, System, Data) and reboot again in the recovery
3. If you update MiuiPro rom, then just select the archive for the rom and flashing it
bug:
just video saving after hours ( you can reboot your device to solve it )
- you tell me
- need to test on OP3 ( I have 3t )
Download(8.2.23)
MOD EDIT: DOWNLOAD LINK REMOVED
screenshot
https://drive.google.com/drive/u/1/folders/1x_V3_R9FfhdH6dOd7ixw2taciInVJQHh[/CENTER]
next version:
1- add aroma installer
2- dolby atoms
3- Gcam with font portrait mod (no pink hue)
4- fix video saving issue
5- try to fix dt2w ( the setting added but not worked by kernel )
6- more new things ....
plz join telegram group :
https://t.me/MIUIPROONEPLUS
MOD EDIT: LINK REMOVED
build then modified to work with MI5s
cradit:
- MiuiPro
- Hito
- Siddk007
- Dhairya Chandarana
Woooow, downloading and testing.....on my OP3t!!!
Thank you for your hard work!!!!
MOD EDIT: OP QUOTE REMOVED
Please do not quote the whole OP to get the developer's attention as this makes reading the forum difficult for everybody. Use the mention feature instead ('@username').
how about gapps?included or need to install separately?how about magisk?can i use it?
trustkil said:
how about gapps?included or need to install separately?how about magisk?can i use it?
Click to expand...
Click to collapse
gapps preinstalled
magisk latest version work
Does this rom have the new notification shade with bundled notifications?
Which firmware needed for rom installation?
even better than the previous build....which was already perfect! thank you again
Diddy0312 said:
Woooow, downloading and testing.....on my OP3t!!!
Thank you for your hard work!!!!
Click to expand...
Click to collapse
Please don't quote long posts. Results with thread spam.
what android is this ?
which firmware should flash before rom ?
if I coming from another rom 8.1 do I need to wipe everything and reformat data?
H0lmEd said:
Does this rom have the new notification shade with bundled notifications?
Click to expand...
Click to collapse
no because base rom not have it already when it available will add it
m7d1 said:
Which firmware needed for rom installation?
Click to expand...
Click to collapse
firmware included no need to flash any thing just the Rom
Rhodesgod said:
what android is this ?
which firmware should flash before rom ?
Click to expand...
Click to collapse
no need to flash firmware it's included
android nougat 7.0
effrem123 said:
if I coming from another rom 8.1 do I need to wipe everything and reformat data?
Click to expand...
Click to collapse
wipe every things : yes
reformat data : no
Does Google camera port with with this ROM? I have tried other MIUI roms but gives me pink pictures when using hdr also the app crashes.
ceanth said:
Does Google camera port with with this ROM? I have tried other MIUI roms but gives me pink pictures when using hdr also the app crashes.
Click to expand...
Click to collapse
it's depend on setting you have with hdr and pixel 2 you won't get pink pictures
no app crash at all
I will test ASAP
BTW please post some screenshots
For me it´s the best Miui 9 we´ve seen here. Moore smooth - battery drain good - more settings - runs very good. Thank you very much, for giving us this OS!!!!!!. It´s since yesterday my daily!!! Maybe in the future: Multilanguage? Sry.for my english!
Thansk for the port
Does rom suppport oos camera with face beauty
Any one install nd test camera
Do we telegram group for this tread
FP is not working properly
Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 6.0.1 and 8.0 RAM 2-4 gb !!!Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343FOR PX30 - https://forum.xda-developers.com/showpost.php?p=79234731&postcount=6
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) and installed in the device SD card slot !!!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Restoring killed (brick) on the device after unsuccessful flashing - https://forum.xda-developers.com/showpost.php?p=75664396&postcount=3254
Built-in Root access, latest SuperSU.
Built-in latest version Xposed.If you write at the first start Xposed - it is installed, but not activated - we exit and reboot the device, then everything will be fine. And do not forget to activate all modules in it!
Signature verification app is disabled.
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Display - Custom settings (here all new added items are located)
1. Lock screen (function for PIN code access)
2. Display Weather ( Show the weather in the screensaver and launcher LM )
3. Hide - Show icons in the Status Bar ( here you can turn on - turn off the buttons in the Status Bar - Back, Home, Moon (launch of the screensaver), Volume, Screen brightness icon)
4. Clock settings in the status bar
4.1 date
4.2 date position
4.3 date Format
4.4 Font
4.5 StatusBar clock color
4.6 Font size
To make the clock visible you need to go to the section StatusBar clock color and set its color.
5. Network traffic ( showing the speed of Internet traffic in the status bar )
6. Gradient StatusBar ( You can make a transparent StatusBar there or add any color.)
7. Developer options
8. Adblock ( blocking the display of ads from the Internet in the browser )
9. Managing startup ( only for advanced users!)
Added reboot and reboot button in the recovery in StatusBar
All the most important and additional applications are in the OEM application
1. HCT_app_gold (factory applications from the firmware HA from March 03, 2018
2. Launchers ( Launcher KGL , JY, HCT, HCT New )
3. Live wallpaper ( Bubbles, Firefly Jungle, Marine Aquarium , Planets )
4. Malaysk Mod
4.1 MTCMovie4_no_panel
4.2 MTCMusic4_no_panel
4.3 MTCMusic4_panel
4.4 MTCMusic4_transparent_no_panel
4.5 MTCMusic4_transparent_panel
4.6 MTCRadio4_no_panel
4.7 MTCRadio4_panel
5. Other Launchers
6. ScreenClock Malaysk
6.1 MTCScreenClock_NEW
6.2 MTCScreenClock_OLD
6.3 MTCScreenClock_Visualizator
Versions of the screensaver 2 in 1. With a long press on it, the screen changes from analog clock to digital.
7. app ( DAB+ , Total Commander , Torque )
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http://repo.xposed.info/module/com.shubhangrathore.xposed.disablefullscreenkeyboard
Screensaver with the function of speed by GPS and Weather.
Added three default launchers - Launcher3 (Gold HA), Launcher KGL (will be the first time you run the firmware), Launcher LM ( with the weather )
Change launcher - Settings - Display - Default apps - Home app.
Added different time values for launching the screensaver in Settings - Screen - Time to start the screensaver - Never-15-30-60 seconds-2-3-5-7-10 minutes.
Added internet radio - PCRadio , if you activate the module in Xposed PCRadio, then the information will be displayed in the screensaver.
Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the speed by GPS in the screensaver in KM / H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
ViperFX is installed in the system.
ViperFx was added to the MTCManager.apk to work after sleep.
Updated all mod applications - Music, Video, Radio. - You need to go into the OEM application and reinstall the applications from the folder - Malaysk MOD
Added to the modified applications button FX - for start ViperFX .
Added multi-window support to these applications.
Other.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Before installing the firmware, try to get into recovery with hardware buttons and move in it on the menu (Briefly press Power button (or the RESET, or button BACK) Apply - long press on Power button (or the RESET, or button BACK). !!!
Installation:
Who has already installed Android 8:
1. Download the apk file from here - https://forum.xda-developers.com/showpost.php?p=78429554&postcount=2517
2. Download the latest version of my firmware, unzip it, copy the update.zip file to a USB flash drive (formatted to FAT32)
3. Install the apk on the device
4. Connect the USB flash to the device (click Cancel on Firmware update window)
5. Run the Istallrecovery application and click Install
6. Automatically get into the Recovery.
7. Select Apply update system
8. In the next screen, select From usb storage.
9.After installing the firmware, we do it in Recovery - Wipe Data
If you have Android 6 installed:
There are instructions in the archive of the firmware version 3.5
Version 3.2 from December 01, 2018
The archive added information on the firmware in English and Russian.
Who is version 1.0 or 1.1 or 2.0 or 3.0- write the update.zip file to the SD card or USB flash drive - go into the recovery and update the firmware. I strongly recommend that after installation immediately in Recovery do Wipe Data (lose all your installed applications) !!
Later I will add all the information to the first page of the forum.
If after installing the firmware after the download, an error appears Xposed install - just go to the Xposed install application and exit from there.
1. The firmware is made on the basis of the factory firmware from October 11, 2018 year.
2. Removed two Chinese keyboards and cleaned the Chinese.
3. There are 3 different launchers installed by me in the firmware. Change Themes in Settings - Display General - Display Extra - Theme.
4. The default time zone is +3 GMT
5. By default, video viewing is enabled in Settings. By default, the mode is turned off when a regular music player starts automatically when a USB flash drive or SD card is connected.
6. In Settings - Display - Time to start the screensaver screensaver start time has been added Never - 15s-30s-60s-2m-3m-5m-7m-10m (By default, the download is set to 7 minutes) The screensaver is launched only in regular applications.
7. Redone regular screensaver. Added GPS speed (by default in kilometers) and buttons for quick access to regular applications. Also show tracks from a regular music player. If someone needs speed in Miles, then the screensaver can be changed in the OEM application in the ScreenClock Malay folder.
8. Added to Settings - Display - Auto screen brightness at sunset and dawn.
9. Redesigned staff application Music with the top panel. An EQ button has been added to the application to launch the equalizer setting and the VIS button to select a graphic equalizer (7 types). When you click on the weather, the screensaver starts.
10. The standard Radio application has been reworked (2 versions - with the top panel and the second version - without the top panel, located in the OEM application in the Malaysk MOD folder. The EQ button has been added to the application to launch the equalizer setting. When you click on the Weather, the Screensaver starts.
11. Redone staff application for Bluetooth. When you call the panel is also translucent.
12. The standard sound of the incoming call is changed and its sound is reduced.
13. Added application for Internet radio - PCRADIO.
14. Weather Settings in Launcher and Screensaver are located in Settings - Display General - Weather overlay
15. Changed regular volume control. Made in AV style and shown below.
16. Reworked regular widgets in the launcher. Made bigger and translucent.
17. In the Status Bar increased hours. And made a translucent status bar in the staff launcher. (will be visible when Live Wallpaper is installed)
18. Added support for OTA updates (via the Internet), for further corrections and additions.
19. If you sync with contacts from your Google account, you can call from the standard Contacts application.
20. Changed the method of calling the brightness panel from the button in the Status Bar.
21. Updated Viber FX.
22. Switching the view in the Screensaver - a long tap in the center of the screensaver (3-5 seconds). The view will change. There are also many other types of me converted in the OEM application.
23. Many other additions and corrections, a very long time to write, because Factory firmware is almost completely changed - you can watch the video - https://www.youtube.com/watch?v=GSD4UobdexU
Do not forget to activate the modules in Xposed Install, copy the folder mtce-utils to the root of the internal memory (Sdcard) and reboot.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Configuring Dark Launcher on firmware version 3.1.1 :https://youtu.be/JL_GGKbvh_s
Download 3.2 December 01, 2018: https://yadi.sk/d/6d0FikHheuRrUA
Mirror https://mega.nz/#!d151kKwC!A25UmqjLUzgPhXsAZw3D2Ew4IZcNHR0zzjuBAOjywcs
Online update 3.1 released.
1. Added support for receiver 800X480 (it is necessary to check, everything was done blindly, I do not have such a device with the screen resolution)
2. New LOGO when you start the device.
3. New settings - Customize the view launcher. Located in Settings Mod - Display General - Launcher settings
4. New settings - View hours and dates in the Status Bar. Located in Settings Mod - Display General - Clock settings in status bar.
5. In the Dark launcher, GPS speed has been added (can be disabled in Settings)
6. Fixed sound panel when turning on the MTCE-Utils module.
7. MtcDialer now visible in programs.
8. Added color setting for weather
9. A huge number of corrections and additions.
The server will be available from 9-00 to 22-00 on MCK.
Download new updated settings 02.12.2018 for MTC-Utils - https://yadi.sk/d/rzA41dZGQ_xk7Q Copy the folder with the replacement in the root of the internal memory (in the ES File Explorer, it is displayed as SDCARD)
Released online update 3.1.2 (133 MB) 25.11.2018
1. In OEM application added new versions of DAB + 180618 and EasyConnected (remove previous versions of DAB and EasyConnected before installation)
In the OEM application are in the app folder.
2. In OEM application, native factory applications from the HCT firmware have been added. Radio, EQ, Widgets, Launcher, Video, Bluetooth, BTMusic. Located in the folder Factory app HCT.
3. Fixed applications for resolution 800X480 ( need to check who has such a device !!!)
4. Fixed the launcher Mal GPS Panel and added the display of tracks from regular Music and RDS Radio. You can configure in the MOD-Display General Settings - Launcher Settings.
5. In the MOD-Display General Settings - Hide - Show icons in Status Bar - added to disable the display of temperature in the Status Bar.
6. Many other fixes and additions.
Released online update 3.2.1 (51 MB) 12/13/2018
1. All screensavers in the OEM application are updated (if you have installed a screensaver from there, then you need to update it again by installing from the OEM application)
2. Added support for Init.d
3. Launcher Launcher NewStyle fixed
4. Added item for Online updates in Settings Mod.
5. By numerous requests added support scripts from b-max - http://4pda.ru/forum/index.php?showtopic=883219&st=9420#entry79441007 (check is necessary, I didn’t really need it )
6. Many other fixes and additions.
Released online firmware update 3.3 from February 1, 2019 (42 mb)
1. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
2. You can customize the Launcher New Style in Settings Mod- Display General - Launcher Settings.
3. Added Greek, Romanian, Turkish languages to settings mod.
4. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings Mod- Display General - Screensaver Settings.
So far it works which is located in the OEM application, in the ScreenClock Malay folder. Who installed the screensaver earlier, you need to reinstall from the OEM application. Do not forget - change the clock screen - press in the middle of the screensaver with your finger for a few seconds.
5. Other updates and additions.
Released online firmware update 3.4 from 5th of April, 2019 (36 mb)
Video 3.4 - https://www.youtube.com/watch?v=DmkIisLg4W8
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
Added 4 themes of all regular applications, Radio, Music, Video, Bluetooth music in red, green, blue and regular (default) colors. You can change themes in the OEM application in the Malay Mod folder.
Added the ability to set your own picture or car logo in the standard applications Radio, Music, Video, Bluetooth music.
Located in Settings - Display General - Set your background or logo in Radio and Music. It is desirable to download pictures in PNG format with a transparent substrate. For example, in Google search, enter the brand of your car, for example hyundai ix35 png and go to Pictures. The higher the resolution of the picture, the better. All can be viewed at VIDEO .
Added custom camera parking lines. The code is taken HERE (many thanks to the developers), only everything is finalized for 8 android.
Added two new screensavers with analog speed display via GPS in KMH and MPH. Also located in the OEM application in the Screensavers folder. Changing the view is also supported with a finger in the middle of the screen;
Added a new equalizer for DSP radio .
Many other additions and fixes.
The full version of firmware 3.5 dated May 14, 2019.
I strongly recommend that you make Wipe Data (reset to factory settings) AFTER installing the firmware.
After installation - go to Settings Mod (to update all settings)
All updated launchers and applications are in the OEM application. (everything is updated in the system too)
What's new, added, fixed in version 3.5:
-The soundbar disappears faster.
-Fixed in Radio, the radio station search panel (relevant for Russia) (if you had Radio installed from the OEM application, you need to update it from there)
-In Settings Mod - Basic Settings added whitelist of applications for auto launch after sleep. Enter the package name of the application you need, separated by a semicolon ";".
You can find out the name of the package in this section of Settings. For example, for ViperFX, the package name is: com.pittvandewitt.viperfx, for StrelkaGPS: com.ivolk.StrelkaGPS
Many thanks for the help of sva4pda!
All screensavers have been reworked, if you have installed a screensaver from an OEM application, you need to update it again from an OEM application.
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown. When you first start, you will be asked for permission for notifications - allow them! And activate the module for Xposed - screensaver.
Thanks for helping graser !!
Launcher settings, bar and screensaver status are now in the main Mod Settings window.
In Settings Mod - Screensaver Settings - you can set your car logo. Download from the Internet the logo of the car in a PNG image with a transparent cover,
size 300x190 Px. Copy it to the internal SD card and go to Settings - Screensaver settings - set the logo.
All launchers have been reworked, if you have installed a launcher from an OEM application, then you need to update it again from an OEM application. When you first start, you will be asked for permission for notifications - allow them!
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown in launchers.
The screensaver with analog speed is fixed - now the speed display starts automatically. (lies in an oem application)
A lot of other additions and fixes!
Video: https://www.youtube.com/watch?v=TaAcfrb-lAA
Download version 3.5: https://yadi.sk/d/VRSZI-xq6-rW4Q
Mirror: https://mega.nz/#!d0gQCIwR!NHTmVGKRFjFuWgMRVlK-6f2WHS2bgPXlSZjk08LDFzU
Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343
Released online update version 3.5.1:
Updated all screensavers, if you have installed a screensaver from an OEM application - update it again from there.
Fixed display of the main weather in the screensaver.
Fixed icon launch settings from the screensaver.
Fixed auto brightness on GPS.
GPS MPH Speed removed from the system - is now in the OEM application, along with the MPH screensaver.
Other fixes.
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=78421073&postcount=2499
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Video V. 3.0: https://www.youtube.com/watch?v=GSD4UobdexU
Video 3.4 - https://www.youtube.com/watch?v=DmkI...ature=youtu.be
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
It was the most difficult firmware for me, from all firmware. If you appreciate my work and the time I spent, you can buy me a beer here :highfive:
reserved
reserved
Oh wow :good:
Thank you Malaysk now we can update our 6.XX Android unit to Android 8
update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error
Thank you
sadaghiani said:
update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error
Click to expand...
Click to collapse
You must do from 1 to 5 points in the section
Installation:
Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.
A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.
Grisu002 said:
Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.
Click to expand...
Click to collapse
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
movieifx said:
A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.
Click to expand...
Click to collapse
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?
Malaysk said:
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?
Click to expand...
Click to collapse
Malaysk, I would like to install your Oreo rom but please tell me why my MX W2 b5626 does not allow me to start the flash of recovery 8 with Kumarai files. Some claim that my slot is fake, it is not enabled to boot from Sd.Però I have to say that I did not create the SD with Windows 7 because I did not have it. I used Windows Vista and 10 and in fact they both gave me an error. What do you think is a change to say SOoppure my unit will never flas the new recovery 8? Another thing: I have never managed to get in recovery from keys because it has no keys, I'm always entered by USB keyboard. You say that I will have problems getting into it after installing the new recovery when the screen turns gray? Answer me please. Thank you
I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks
maniep said:
I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks
Click to expand...
Click to collapse
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read
Clandaries said:
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read
Click to expand...
Click to collapse
I made 2 SD Cards.
The 1st one has 3 files on it:
RKSDFW.TAG
SD_BOOT_CONFIG_CONFIG
SDUPDATE
The second Card has this 2 Files:
Copy_to_Innternal_sd_(SDCARD)
Zip file UPDATE
will not self update by inserting the first card.
Advise?
After upgrading the given software via @ Malaysk, I still have the basic OREO, I installed with the cleaning.
No additives as given in post # 1
mirrors:
dropbox:
recovery https://www.dropbox.com/s/43zopglkpsvxzjw/sdupdate_img from 8.0 Android.rar?dl=0
v1.1 https://www.dropbox.com/s/uvujqbyad...PX5_v_1.1_MALAY_22_03_2018_MTCD_MTCE.rar?dl=0
google drive:
recovery https://drive.google.com/file/d/1APMBe0GmBCez_A4bMOfNLVt2yI51EIG6/view?usp=sharing
v1.0 https://drive.google.com/file/d/10iKTBIvklhzWMXOXDxoLG0T5gcwN2Nhp/view?usp=sharing
v1.1 https://drive.google.com/file/d/1vReptyOHBQnUmHUorgtA4qm7YJKWM0YI/view?usp=sharing
v2.0 https://drive.google.com/open?id=1-KasU6Gs2seQC0DAxxkKy5atWER8Jw7b
v3.0 https://drive.google.com/file/d/1NFDgfusCb5A9dKXHdNpFrOJjTnh_BY8D/view?usp=sharing
v3.2 https://drive.google.com/file/d/1BcwBQLe9a18zl8xNdgfMT_CU-q8nF7BX/view?usp=sharing
i do install malay mod
very nice
thank you
but A Note
for install first stage
you must go to recovery mod and reboot then This step is done
Malaysk:
Is the only update to your sdupdate.img the one from kumarai the malaysk splash screen on boot?
Either way I can confirm that this process worked coming from malaysk android 6 v7.2 on a mtc d/e 2gb unit
That's how it looks after me after installation:
Can I upgrade a system that has a DSP?
Only for devices processor Rockchip PX30, MCU - MTCD, MTCE, MTXX (XX- different letter combinations ) Android 9.0 !!!
Mod Pie 9.0 Android PX30 RK3326
For Mod Pie 9.0 Android PX6 MCU STM32 RK3399 is HERE
For PX6 RK3399 mod 9 android is HERE
For PX5 RK3368 mod 9 android is HERE
Only for devices that already have 9 android from the factory !!
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) !!!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings-System - About the device and see your model !!!
What is added, changed:
LITE firmware version:
Root access
Added ESFileExplorer, RootExplorer, PlanetsPack live wallpapers.
Two launchers (one with day and night support)
The ability to start screensaver and set the start time of 15-30 seconds 1-3-5-7-10 minutes is included.
By default, video viewing while driving is enabled and sound muting in Navigation is set to -3.
Changed the Music and Radio application (also made translucent)
The ability to set your logo in the Radio and Music application in Settings.
Changed the main Settings.
Reworked soundbar
Reworked watches in the Status Bar with the ability to edit them - set the size, color, date.
The ability to set the viewing speed of Internet traffic in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Video LITE firmware version:
Installation: Please read carefully the instructions for installing the firmware in the archive along with the firmware.
Only for devices that already have 9 android from the factory !!Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings - System - About the device and see your model !!!
Download lite firmware version 1.0: https://yadi.sk/d/Qx8le85frD93ng
Mirror lite firmware version 1.0: https://mega.nz/#!5gIWiA4D!fFnVVrg_0scFzwd5-MpXCD44AYbpSjQ2tXD_1wRc-lI
Full firmware version :
All that is added in the lite version firmware of PLUS +:
Full root access (including the System section)
Six fully modified launchers with viewing tags of listening music (any music application), Bluetooth music and radio stations.
The ability to configure launchers (enable, disable unnecessary functions in the Settings) and the Weather settings in them and display speed via GPS.
Fixed GPS.
Improved location accuracy.
With a cold start - satellites are found in 40-70 seconds.
With a hot start (after sleep or reboot) - instantly.
Who had problems with USB ports or WiFi loss - fixed.
Initialization of USB and WiFi after a full system boot and after sleep.
A new method and settings for the white list of programs to start after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for adding third-party programs (for example Poweramp)
when launched, the sound will be muted for regular programs Music, radio, etc. (located in Settings Mod - Mod Settings - System Settings)
A new white list for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redone Launcher with support for day and night. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen.
- Clock, GPS speed, Weather, or choose to display your logo (download the logo on the Internet (for example, the logo of a BMW car),
in PNG format and preferably with a transparent backing and copy the file to the device’s internal memory)
The new graphic equalizer in the Music and Screensaver applications, with four different graphic equalizers and color choices.
3 types of screensavers with analog and digital clocks, with the ability to show speed by GPS, Weather, tag tags of listening music (any music application),
Bluetooth music and radio stations. Full customization of screensavers - color, font, disabling unnecessary functions, logo of your car, etc. in settings.
Change the screensaver view - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM application.
Customizable rear camera parking lines. You need to enable them in Settings - Settings related to the car - Advanced settings - Parking lines (ON)
Changed the volume panel and reduced the time of its disappearance.
Fully customizable Bar Status with the ability to enable and disable buttons and icons in it in Settings.
A reset button has been added to the Status Bar.
Screensaver, Music, Navigation, Bluetooth Music buttons have been added to the Status Bar (you can enable - disable in the settings)
Changed the function of calling the brightness panel in the Status Bar.
The screensaver now starts in all programs, in Settings there is a White List of applications where you can specify applications where the screensaver will not start.
Added the White List of Applications in Settings, where you can specify autorun after sleep.
Added equalizer ViperFX - settings can be viewed on the video
Changed the Bluetooth Music app.
Factory settings are changed for resolution 1024X600 and Russian translation is added.
Completely changed applications Music, Radio, Video.
Keyboard replaced by SwiftKey
You can execute your scripts in a folder System/etc/Init.d
Added online radio PCRadio (will appear if Wipe Data is done).
The icons in the Status Bar have been fixed for applications that have support day and night (bluetooth, Radio, launcher).
In the OEM application Added new Radio with support for day and night (translucent)
Go to the OEM application and install the application from there (there are screenshots there)
Added analog screensaver (located in OEM application)
Settings Mod - Mod Settings - System Settings - added Auto screen brightness by GPS.
Settings Mod - Display General - added Developer options.
In the OEM application - ScreenClockMalay - added an analog GPS screensaver for MPH (America and others who use MPH)
Support 1280X720 screen resolution
Four custom buttons have been added to screensavers to launch your programs.
Long press on the button - application selection.
Short press on the button - launch the application.
If you have installed the screensaver from the OEM application, you must reinstall it.
Added Music application with support for day and night (located in the OEM application)
Now you can configure the MODE button to launch your applications.
It is located in the Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
If it is disabled, the standard method of the MODE button is used (start Radio-Music-Video)
A graphic equalizer has been added to the screensaver.
In the OEM application, another version of the Music application has been added.
Added the ability to automatically adjust sound by GPS speed.
It is located in Settings Mod - Mod Settings - System Settings - GPS Auto volume control .
Removed pop-up messages with auto brightness via GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
It is located in Mod Settings - Display General - Pop-up notifications settings for players and Radio.
The new application for the equalizer, more options for tuning the DSP.
In the OEM application there are two types of equalizers, you can set which one you like
Video of the full version of firmware part 1:
Video of the full version of firmware part 2:
Download full firmware version 1.1: To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Update for FULL version 1.1 dated January 25, 2020.
1. Added support for OTA updates via the Internet.
2. Updated graphic equalizer in Music and Screensaver + two new types of graphic equalizer. If you installed Music and Screensaver from the OEM application - you must reinstall them !!
3. New launcher CHS.
4. The new Bluetooth application for making calls. Now you can control the device during calls.
5. New Radio application - located in the OEM application (in the Radio_Mod folder - RADIO_CHS)
6. Fixed WiFi launch (on some devices it did not start automatically after reboot)
7. In Settings Mod - MOD Settings - Statusbar settings - Hide - Show icons in the statusbar - added complete hiding of the StatusBar panel.
8. Updated GPS auto brightness
9. Added TTL selection for modems and WiFi (selection of values from 23 to 256, default 64)
10. Fixed an alternative launch list for your applications using the MODE button
11. Fixed launch of navigation on the hardware button.
12. Added a list of applications that will automatically start after the device is booted (in Mod Settings - Mod Settings - System Settings)
13. Fixed choice of screensaver start time.
14. Many other corrections and additions.
Who has the full version 1.0 and 1.1 (from a different date) installed, write to me by e-mail.
To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Important information! - https://forum.xda-developers.com/showpost.php?p=80099333&postcount=130
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=80203260&postcount=88
In the process of filling !!!
Only for devices that already have 9 android from the factory !!
Click to expand...
Click to collapse
PX30 and PX6 with Android 8.1 can be updated with Modinstaller Pro to Android 9.
https://youtu.be/X0qsmwnaQA8
So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?
pjottrr said:
So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?
Click to expand...
Click to collapse
You can try installing the firmware and checking. You can return to the factory firmware at any time.
thnx,
i'll try that
sorry for the edit in this post, i wasn't reading......
so that works great
now all i want is to upgrade to the full version
how can i get the full version?
I have a PX30 device with Android 8.1.0
Exist a solution to upgrade my device to Android 9 other than the Modinstaller Pro.
Hi how do we get full version?
I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?
Just read the part about donation people getting the full version!! Thanks!
Email sent! Thanks again!
BTW, had the admin changed my user name from Arden to Cantrepeat.
Timpuli said:
I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?
Click to expand...
Click to collapse
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.
6mur6mur6 said:
Hi how do we get full version?
Click to expand...
Click to collapse
Hello! Download the LITE version. The archive has instructions for the full version.
Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?
Malaysk said:
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.
Click to expand...
Click to collapse
Thank you, that do the trick.
Installed on an Eonon GA2176. Full install and working well!
Thanks for the work on the ROM. Great to be root and free of factory ROM!
pjottrr said:
Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?
Click to expand...
Click to collapse
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
Malaysk said:
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
Click to expand...
Click to collapse
Thnx, i thought i had looked there as well, but apparently i missed it,
i found the setting, set it up , yet it doesn't seem to work.
i used the wheel key study to bind the mode button to "mode" , is that a correct setup , or should i do something differently?
hi is there anyway to make the icons smaller in the status bar, i think you could in the lite version?
thanks
Running the Full version, everything seems to work well, thanks a lot ! ! !
Hi @Malaysk, quick and noobie question as I'd love to try the lite version before buying the full one:
I'm running a PX30, but a CHS one.
My build number doesn't mention the RK3326 (the guy that installed the unit updated the original rom to this one: https://yadi.sk/d/umCvHqCDzHccr/RockChip PX30 Android 9/CHS ).
Photo from my unit:
https://photos.app.goo.gl/svDPfkQ7em4x6YUh7
I know I can always back up in recovery and rollback, but I'm kind of afraid I might make some stupid mistake by flashing this one and bricking the unit somehow due to some incompatibility. Do you know if it's compatible at all?
Cheers and thanks for your work!