Hello sir i am from india i got a xperia zl which is a year and a half old . While back i tried flashing a rom which resulted in bricking the device. When i press the power button i only see a red notification light coming and nothing else is seen on the screen.. how do i unbrick my phone, or whom should i give my phone to repair. Please help sir .
the model no is c6502.
I think you better take a look at this thread here
Without having any details from you I can only speculate to what the problem is. If that thread does not apply to your issue you can always register and ask your question here
Good luck
Related
I bought a motorola defy plus a month ago ....i downgrad and it said downgrade finished sucessfully but afterwards when i started to turn on my dify+ or connected it to pc rsd lite isnt recognizing my phone it is just giving me a white light ....... so i think its dead plz plz help me ....my dify+ only give me white light but pc no recognize So i need u to tell me only how can i make it boot to the bootloader and after that i can continue BUT PLZ SOMEBODY TELL ME HOW TO MAKE IT START THE BOOT-LOADER BECAUSE ITs NOT RESPONDING FOR THE ( vol+ and power ) PLZZZZZZZ SOME HELP i serching in the web but this problem no one answer it ...here in xda-developers they only said that the problem solved but no mention how to do it SPATIALLY the bootloader how to get.
PLZ HELP:crying:
I have the RIFFBOX JTAG but no diffy+ support in it.
where is the developers????????
NO ONE ANSWER?? OR HELP ?? !!!!!!!!!!
Firstly, the DEVELOPERS do not exist on XDA just to help someone who has screwed up their phone by not following the instructions correctly.
Secondly, try posting this in the Q&A thread for the Motorola Defy and you might get an answer from someone who knows the device.
1st ...thanx for reply SimonTS at lest somebody echo me when i say HELP.
2nd..i put this in Q&A first before i put it here BUT NO ONE RECALL OR ANSWER ME ...NO REPLAY ...ITS LIKE I'M TALKING TO(NO BODY) SO I'M VERY SAD
I want to Root my Sony Xperia M Dual, I try many ways but got unsuccessful, then I was told to unlock my boot loader, after I had my boot loader unlocked then after it stuck in bootloops, then I got to know that I should flash kernel and flash rom to get out of boot loop
Now the Condition is that, my Xperia M Dual is not booting not even in fast boot mode or flash boot mode.
I think it get Hard Bricked, what to do Guys I am in BIG Trouble, I am Actually confused what to do
Now only I can see when I connect my Device to my computer and press Power button, the light beam below get 3 time flash
I still Learning, PLEASE GUYS help me to get out of this situation
THANKS in ADVANCE :good:
Hi! Here is a thread in your device section with a very similar issue. The last post says he solved the issue. You could try what's suggested in the thread, and if it doesn't help....ask how the opening poster fixed his issue.
>*Legacy & Low Activity Devices*>*Sony Xperia M*>*Xperia M Q&A, Help & Troubleshooting*>*Bootloader unlock went ok now bricked?
Good luck!
Thanks for link bro
KJ said:
Hi! Here is a thread in your device section with a very similar issue. The last post says he solved the issue. You could try what's suggested in the thread, and if it doesn't help....ask how the opening poster fixed his issue.
>*Legacy & Low Activity Devices*>*Sony Xperia M*>*Xperia M Q&A, Help & Troubleshooting*>*Bootloader unlock went ok now bricked?
Good luck!
Click to expand...
Click to collapse
thanks for the link, but now it is not even ready to enter flash boot or fast boot mode just i can get the 3 times red light beam flashes when I try to swich it on ....
As I said, asking in the thread I linked will get the guys who know your device to help.
If you don't get a response soon there....you can open a new thread in your device Q&A section....here....
>*Legacy & Low Activity Devices*>*Sony Xperia M*>*Xperia M Q&A, Help & Troubleshooting
Hi everybody,
I am new to this forum and to phones flashing in general. I am writing this thread in order to request your help to resolve a problem.
I have a Sony Xperia Sola, and I installed a custom firmware on it following the following topic: http://forum.xda-developers.com/xperia-u/u-development/4-0-4-xu-miui-v5-fast-stable-t2482327
Unfortunately, I did not careful cause the firmware is meant for an Xperia U, not an Xperia Sola. After trying to reboot, the phone does not start at all now. It vibrates once and that's all. When I plug it to my PC, the phone's red led is on for one second and then nothing.
Would you please give me some tips to resolve this issue ? I would be very happy to fix this problem.
Best regards,
Ghayth
Hi guys i have this phone its nothing has ever been changed in it. however it suddenly stopped
booting up 2 days back and its stuck on colorfull wave screen . I have no clue how to come out of it ive tried pc companion thats not helping either .
Can any one please suggest me steps what i can follow to repair it step wise i am totally confused ive never done anything like this before .
Thanks
XDA Visitor said:
Hi guys i have this phone its nothing has ever been changed in it. however it suddenly stopped
booting up 2 days back and its stuck on colorfull wave screen . I have no clue how to come out of it ive tried pc companion thats not helping either .
Can any one please suggest me steps what i can follow to repair it step wise i am totally confused ive never done anything like this before .
Thanks
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, please go to your device forum... (see below)
Sony Xperia M Device Forum
http://forum.xda-developers.com/xperia-m
and you may ask for help here: (Q&A Section)
http://forum.xda-developers.com/xperia-m/help
and also in your case... not a bad idea to check the development section:
http://forum.xda-developers.com/showthread.php?t=2748768
Always Remember to use the Search...
Thank you! Hope this help!
Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
XDA Visitor said:
Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like a hardware fail to me. Water damage does not have to be visible (scorching happens way more often if there was salt in the water). You will need warranty work at this point.
If you need a second opinion, you can try this thread (once you have registered for an XDA account):
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q&A] Gionee elife e3 development - root, cwm , roms , nadroid backup explained in
Hope this helps, and good luck!