Q&A for [ROM] CN Mod V2 for F350/S/K/L and D838
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CN Mod V2 for F350/S/K/L and D838. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
No WIFI, No Bluetooth, No SIM signals after CN MOD
After flashing CN MOD on my LG G Pro2 F350L, phone worked awesome for two days; but then suddenly, while charging, it went off and after removing and reinstalling the battery, phone turned on but there are no Signals for my SIM Card, turning the wifi on sticks at "Turning on wifi" can't even turn the Bluetooth on. It seems like all the radios are bad. In "About Phone" portion of settings, Mac addresses for Wifi and Bluetooth are "Unavailable" IP address is also "Unavailable".
Spent hours and hours googling but can't find the stock firmware to go back off-shelf. Already tried Factory reset and flashing another custom rom (Digital Minds V 4.1) but to no avail. Badly need help.
Any response will highly be appreciated.
http://www.lg-phones.org/official-stock-lg-g-pro-2-tot-firmware-rom.html
Related
Q&A for [KERNEL][ANYKERNEL] pink kernel 20140728
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ANYKERNEL] pink kernel 20140728. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is it compatible with Moto G LTE (XT1039) ?
How do I enable pocket detect, and what exactly does it do?
Question
Would it be possible to implement "options to disable wake functions with timeout or power button" like in the ElementalX kernel for N5?
Stuck at boot logo when Flashing over Xperience 5.0
Hi,
First: I have flashed this kernel over multiple ROMs (CM11, Xperience 4.4...) and it worked magnificiently, but when I flash it onto any Lollipop ROM (I'm on Xperience's latest build), I get stuck at the boot logo.
I have waited over 20 minutes multiple times, without luck. Could anyone help me?
Really love DT2W, and all the other features!
Second: Whatever ROM I install, the right and left audio channels are inverted.
When I come back to stock, are not switched anymore.
I have searched many forums on this issue, with no success.
Thank you for reading this and/or answering!
[UPDATE] Installed Donkey Kang kernel by pushing through ADB, and It works fine. Would still really like to use PINK kernel.
WLAN / WIFI isn't working
After i installed the kernel i couldn't activate wifi anymore :/ pls help
[Q&A] [ROM][UXUMAY]SUPERLITE SUPERFAST ROOTED OFFICIAL SAMSUNG JB4.1.2 >179MB< Feb25
Q&A for [ROM][UXUMAY]SUPERLITE SUPERFAST ROOTED OFFICIAL SAMSUNG JB4.1.2 >179MB< Feb25/13
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UXUMAY]SUPERLITE SUPERFAST ROOTED OFFICIAL SAMSUNG JB4.1.2 >179MB< Feb25/13. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem with connecting to a VPN
Hey Vincom,
Long time lurker here but just recently registered. I finally decided to root my phone, after lots of reading I decided to give this one a try. I got it working great first try, wish I had rooted years ago. I cant thank you enough, I installed as per your instructions and phone is now blazing fast. One thing though, I've reinstalled most of my favorite apps. I need to run a vpn in order to run Pandora in my country. The 2 I use are Hideninja and mainly SuperVPN. HideNinja won't connect and won't give me any error messages. SuperVPN on the other hand gives me a message of "your system do not support vpn". Do I need to install something else on my phone in order to make these work?
Again thx for your work and to anyone else who might be able to help me with this issue.
Google Maps
Hey yall,
My Google maps is bnot working properly. I am able to see my gps location but it does not track my movements while I drive. It just stays at the gos coordinates I start at. Any ideas?
Q&A for [4.2.2][MIUIv5 4.2.7] XT926
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [4.2.2][MIUIv5 4.2.7] XT926. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop
Hi guys. Umpteenth time i tried to flash my xt926 with my favorite os miui, but i just have a bootloops, with moto logo.
I did all necessary wipes before and after flash, and i tried without wipe after flash but result is the same.
During flashing i have some message like md5 check skipped or failed, cant remeber all text.
Give me please precious advice, how to solve problem.
I had miui on defy+, and i can say that miui is the best that happened with android.
Recovery- last twrp, kitkat.
Sorry, but unfortunately my english is not perfect.
Motorola XT926 32Gb
VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF - Firmware
Bootloader Unlocked
TWRP 2.7.1.0
1) Full wipe
2) Instal zip
3) Wipe Cashe/Dalvik
4) Reboot
About 5 min I see motorola dual core technology boot logo, reboot and logo again. What I did wrong?
Wanted to check if anyone knew about a gsm build of miui for JB...I really liked this roms interface but couldn't play with it much as the sms is screwed up.... USSD codes for my carrier wont work... I don't want to upgrade to kk because it doesn't work as a daily driver for me.... Currently i am on the nexesque 3.6
Q&A for DXMD3 - eRobot ROM for G-TAB 7.7
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for DXMD3 - eRobot ROM for G-TAB 7.7. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can anyone port the [ROM] 24 Dec [Aroma] [P6810 / P6800] for i815
Alcoforado said:
Still using my p6800 (less and less as a phone now, but still good for comic reading, casual gaming and movie watching )
And while i think daniel_hk has been making a terrific job keeping the device updated, so far i keep getting back to a DXMD3 build for stability (can't get BT to connect to my car in any of the 4.4 builds and battery drain is too erratic).
From these, the " erobot 2.3P Last version" seems to me the less bloated than the skyhigh (don't really care for multi window...),can play movies in full screen and the battery use seems more "balanced". Only problem is that google now ins't working properly... keeps giving "you need to update" ...
Click to expand...
Click to collapse
Can anyone port the [ROM] 24 Dec [Aroma] [P6810 / P6800] MULTI-LANGUAGE JB 4.1.2 | SkyHigh [v3.5] for the i815? I like very much for this rom and i have this in my P6800 but a friend of mine bring me a i815 from USA and i wanna install this rom in the device.
Thanks for any help
Q&A for [rom] [tw 4.3][ml1] samstock 1/6/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom] [tw 4.3][ml1] samstock 1/6/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Battery Drain
Hi,
I have a S3 i535 phone which was already rooted when i got it. It was running on some customer rom may be it was jellybean 4.1.2.
My bad luck, i tried updating the features i tried installing few other customer roms . Here my problems started.
Few roms i flashed were not functioning, i just get Samsung logo after restart nothing else. Few other crashes camera.
I got this Rom by chance and was very happy using it. i have what i need. No issues with camera or any other app.
I used it for almost 1 week and noticed that my battery is draining very fast.. I tried going into recovery and flashing the rom again, same result, battery still draining fast.
I have used CM 10.2 rom too and it gives decent battery backup so i know its not the battery.
Either am doing something wrong or may be some issue with rom.
One more question.
currently i am on 4.3.1 . is it possible for me to go back to 4.1.2. if yes, kindly explain me(Am dummy)
I have tried installing but gets stuck on Samsung logo and then i have to flash some other rom
# I am using TWRP recovery.
Or, if you can suggest me some other good roms or kernels that i can try.
Hope to get a reply and help soon.