[Q] [HELP] [Oneplus One] Bricked One - ONE Q&A, Help & Troubleshooting

Hello guys
I received my oneplus One early this week and i upgraded it OTA to XNPH44S and it was working fine. I used the Oneplus One toolkit to unlock the bootloader and flash TWRP recovery then flashed the SU zip. Some minutes ,of regular use, later the phone froze and when I tried to reboot it, it stuck on the boot screen (with the one plus logo). I reflashed the CM11 XNPH44S via Fastboot and that solved the issue.
A day later the phone froze once again and when rebooted stuck on the boot screen. I can go to fastboot mode and when i try to go to recovery mode it loaded the start screen (TEAMWIN (blue)) and reboots again; so no recovery access. I tried to reflash the ROM but the process fails saying :
erasing 'userdata'...
FAILED (remote: failed to erase partition)
I tried the ONEPLUS Restore tool and it doesn't go through the second step. (My drivers are fine and i even tried on windows XP)
to sum up:
I can access fastboot mode
Recovey stuck at Teamwin screen
bootloader is unlocked
tamper bit is true
I can't flash the stock ROM (can't erase userdata partition)
I need your help guys
Thank's in advance

Which restore tool did you try? There are two:
http://forum.xda-developers.com/showthread.php?t=2970390
http://forum.xda-developers.com/showthread.php?t=2991851
Transmitted via Bacon

timmaaa said:
Which restore tool did you try? There are two:
http://forum.xda-developers.com/showthread.php?t=2970390
http://forum.xda-developers.com/showthread.php?t=2991851
Transmitted via Bacon
Click to expand...
Click to collapse
I tried both of them
The first one went to the end of the process although it failed to erase 'userdata' partition. the phone is still suck on boot screen.
The second one kept looping on the first step : right after the first step, the phone reboot normally and freezes on boot screen
Thank you

Related

Maxx stuck boot looping

Hey Guys,
I rooted my device a while ago and everyday had to dismiss the OTA update for the last few months. The other night I accidentally accepted the OTA and know my phone is stuck in a bootloop when connected to power. I'm occasionally able to get into Fastboot mode for RSD to see the phone, ADB will not see the phone. When I attempt to select Recovery or Factory the phone bootloops. I have also tried House of Moto and that didn't work.I have tried flashing all the files located at sbf with no luck. In Fastboot the Device is listed as UNLOCKED with a Status Code: 1.
Any help will be greatly appreciated.
When I flash using House of Moto I get an error for the following:
gpt.bin
motoboot.img
logo.bin
boot.img
recovery.img
system.img
NON-HLOS.bin
uniqueflips said:
Hey Guys,
I rooted my device a while ago and everyday had to dismiss the OTA update for the last few months. The other night I accidentally accepted the OTA and know my phone is stuck in a bootloop when connected to power. I'm occasionally able to get into Fastboot mode for RSD to see the phone, ADB will not see the phone. When I attempt to select Recovery or Factory the phone bootloops. I have also tried House of Moto and that didn't work.I have tried flashing all the files located at sbf with no luck. In Fastboot the Device is listed as UNLOCKED with a Status Code: 1.
Any help will be greatly appreciated.
When I flash using House of Moto I get an error for the following:
gpt.bin
motoboot.img
logo.bin
boot.img
recovery.img
system.img
NON-HLOS.bin
Click to expand...
Click to collapse
Does it ever actually boot up and then just restarts? Or are you never getting to the homescreen?
no home screen
Hi,
It won't even boot loop unless it's connected to power. When it is it just boot loops, tried everything but can't get past the boot loop. Spent countless hours trying to make any progress.
try flashing TWRP from fastboot
Code:
fastboot erase recovery
fastboot flash recovery name.img
if you get into recovery try restoring a nandroid
if that doesnt work, make sure you are flashing the appropriate SBF from the update you were in teh process of taking. My bet is somehow your device got partially updated (bootloader) so you are now unable to flash the SBF you were prevously on. ie. you were on 4.2.2, and took the 4.4 update, you need to flash the SBF for 4.4, not 4.2.2
Once you get back up and running, make sure you disable the Moto OTA app using titanium or the like. That should prevent the phone from trying to take an update again.
Still no luck
Thanks everyone for the suggestions, I'm not sure which firmware it was trying to install so I installed all the firmwares available via House of Moto and still no luck. Tried performing a Full and Keep Data and still the phone will continue to boot loop. One thing I did notice during the install using House of Moto I see the following error multiple times:
(bootloader) Variable not supported!
I got this error on all 5 firmwares.
Any ideas...
uniqueflips said:
Thanks everyone for the suggestions, I'm not sure which firmware it was trying to install so I installed all the firmwares available via House of Moto and still no luck. Tried performing a Full and Keep Data and still the phone will continue to boot loop. One thing I did notice during the install using House of Moto I see the following error multiple times:
(bootloader) Variable not supported!
I got this error on all 5 firmwares.
Any ideas...
Click to expand...
Click to collapse
what version of android were you on prior to this happening. What version was the OTA attempting to update you to?
I think I was on Android 4.4 Blur_Version.19.5.3.obake_verizon.Verizon.en.US, not 100% sure what it was trying to install 4.4.4 or 4.4 19.6.3.
Tried House of Moto again and on the 4.2.2 12.15.15 and 4.4.4 I don't get the (bootloader) Variable not supported! error. The phone still boot loops.
uniqueflips said:
I think I was on Android 4.4 Blur_Version.19.5.3.obake_verizon.Verizon.en.US, not 100% sure what it was trying to install 4.4.4 or 4.4 19.6.3.
Tried House of Moto again and on the 4.2.2 12.15.15 and 4.4.4 I don't get the (bootloader) Variable not supported! error. The phone still boot loops.
Click to expand...
Click to collapse
have you tried with the latest version of RSD lite?
If so make sure you edit the XML file to remove the part about erasing userdata
lets try this too... go to sbf.droid-developers.org and download this file for the maxx "Android 4.4.4
Blur_Version.21.11.21.obake_verizon.Verizon.en.US"
Install the latest moto device manager and RSD lite, then try flashing (might erase userdata)
If that does not work, you can manually flash each file in fastboot, lmk if any of that works
last Q, do you have a motorola factory cable?
Tried with and without removing the getvar file and no luck, still stuck in an endless boot loop when connected to power. ADB still doesn't see the device even in Fastboot mode. Never flashed each file in fastboot individual doesn't that require ADB?
uniqueflips said:
Tried with and without removing the getvar file and no luck, still stuck in an endless boot loop when connected to power. ADB still doesn't see the device even in Fastboot mode. Never flashed each file in fastboot individual doesn't that require ADB?
Click to expand...
Click to collapse
no you dont use adb from fastboot, you use "fastboot"
Lets see if we can get you booted to a recovery. Download this file, save it as recovery.img in your ADB directory.
boot to fastboot and run this command to determine fastboot sees the device
Code:
fastboot devices
If you see your device, then run the next command
Code:
fastboot flash recovery recovery.img
then try to boot to recovery. post result (make sure when you highlight "recovery" in fastboot you use volume up to select it. I just made the mistake of using power and my phone wouldnt boot to recovery)

Updating to 6.0....and bricked

Stock, unrooted xt1540. Got the update notification this morning, so excited. After updating, it's boot looping and the M logo is the furthest it can go.
Tried to fastboot flash back to old 5.1.1 factory image, "image validation failed". Maybe because boot loader got updated and won't roll back?
All I can think of now is to wait for the 6.0 factory image and try that again, but I may end up waiting for it too long.
Any suggestions? Thanks!
What about the images at http://forum.xda-developers.com/2015-moto-g/general/ota-moto-g3-marshmallow-ota-links-t3284308
Try in fastboot clear the cache and data ...
have you tried using twrp to just install a cm rom or something similar?
worst case scenario you can use twrp to force the soak test images onto their respective partitions. if your bootloader was updated the soak test will run...even if it bootloops for any reason, then at least you've taken one step forward again.
MrTooPhone said:
What about the images at http://forum.xda-developers.com/2015-moto-g/general/ota-moto-g3-marshmallow-ota-links-t3284308
Click to expand...
Click to collapse
I wish I could resume the OTA, even manually, but right now I can only go to bootloader, not even the stock recovery....Thanks for the idea, though! Really appreciate it.
hp420 said:
have you tried using twrp to just install a cm rom or something similar?
worst case scenario you can use twrp to force the soak test images onto their respective partitions. if your bootloader was updated the soak test will run...even if it bootloops for any reason, then at least you've taken one step forward again.
Click to expand...
Click to collapse
I just tried flash in the twrp.img, got declined by bootloader again...
Now is there factory images for the soak test? Thanks!!
lexer98 said:
Try in fastboot clear the cache and data ...
Click to expand...
Click to collapse
clearing cache went through, but clearing data failed. Rebooting to bootloader mode and try returning to stock again, still no go...
In fastboot mode, I can flast logo, fsg, NON-HLOS, bootloader, recovery -- all from 5.1.1 factory image, but when I tried to flash boot or system chunks, it says:
D:\Desktop\g\Mfastboot>fastboot flash system system.img_sparsechunk.0
target reported max download size of 268435456 bytes
sending 'system' (262141 KB)...
OKAY [ 10.573s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 11.042s
Is my only option to wait for the MM factory image....
alvin612 said:
I just tried flash in the twrp.img, got declined by bootloader again...
Now is there factory images for the soak test? Thanks!!
Click to expand...
Click to collapse
Well....yes and no.
http://forum.xda-developers.com/201...-devs-moto-g3-xt1540-soak-test-files-t3255643
The images all flash in fastboot except the system one, which requires using adb shell while booted to twrp. You have to use a dd command to force the system.img into the correct partition.
Earlier today I had to give up on this osprey because of limited bandwith for fix.
Thanks again for everyone's help!!
My phone got bricked after trying to downgrade from MM to LP
Hello, yesterday I was trying to downgrade from MM to LP using Fastboot and by mystake I flashed "fastboot flash partition gpt.bin" and it failed, the others commands failed as well, after that I was unable to turn on my device, it only let me access to Bootloader Mode and also shows the battery charging, cannot access to recovery, and it shows black screen when I try to turn it on.
My phone is completely stock, It has neve been rooted, stock recovery. Its a Moto G XT1540. the Bootloader is locked.
Is there a way to bring my phone back to life? What can I do?
JulesSDK said:
Hello, yesterday I was trying to downgrade from MM to LP using Fastboot and by mystake I flashed "fastboot flash partition gpt.bin" and it failed, the others commands failed as well, after that I was unable to turn on my device, it only let me access to Bootloader Mode and also shows the battery charging, cannot access to recovery, and it shows black screen when I try to turn it on.
My phone is completely stock, It has neve been rooted, stock recovery. Its a Moto G XT1540. the Bootloader is locked.
Is there a way to bring my phone back to life? What can I do?
Click to expand...
Click to collapse
I contacted Motorola. Warranty covers my situation. Going to ask for a replacement.
JulesSDK said:
Hello, yesterday I was trying to downgrade from MM to LP using Fastboot and by mystake I flashed "fastboot flash partition gpt.bin" and it failed, the others commands failed as well, after that I was unable to turn on my device, it only let me access to Bootloader Mode and also shows the battery charging, cannot access to recovery, and it shows black screen when I try to turn it on.
My phone is completely stock, It has neve been rooted, stock recovery. Its a Moto G XT1540. the Bootloader is locked.
Is there a way to bring my phone back to life? What can I do?
Click to expand...
Click to collapse
Unlock the bootloader and then try flashing. I was in a similar situation once, was getting failed messages when trying to flash official signed factory images. Unlocked the bootloader and then tried to flash and voila, everything flashed smoothly. No harm in trying unless you are worried about warranty.

Stuck in fastboot no recovery

Hello guys I need some help. I'm stuck in fastboot mode with no recovery or OS too l, let me retrace my steps.
I had my px3 rooted on stock but I was bored with stock and tried to flash bootleggers rom and followed instructions to wipe "everything" but internal storage, so I did including storage under internal storage and flashed the ROM and twrp with it. After it just rebooted back to recovery every time I tried normal boot. (I'm assuming I F'd up by wiping storage). So I googled what to do about looping recovery and one suggestion was to factory reset so I did; I can no longer access recovery. I've tried flashing factory image, flashing the twrp zip, trying to boot straight to twrp, I can't get to adb sideload and it says "no valid slot to boot" on fastboot screen any suggestions?
Got another on fastboot, "error booting boot.img"
Does your PC recognize the phone in Fastboot mode? I would try flashing the full factory image again. Ensure you have the latest platform tools and the correct firmware for your device.
fury683 said:
Does your PC recognize the phone in Fastboot mode? I would try flashing the full factory image again. Ensure you have the latest platform tools and the correct firmware for your device.
Click to expand...
Click to collapse
Yes it does and I've got everything from twrp .zip and .IMG, factory images and ota zip.
I did make progress just now and switched to slot B and got TWRP to show up:laugh: might just sideload OTA and pretend this never happened
Update, adb sideload taking too long to start
wergrun said:
Yes it does and I've got everything from twrp .zip and .IMG, factory images and ota zip.
I did make progress just now and switched to slot B and got TWRP to show up:laugh: might just sideload OTA and pretend this never happened
Update, adb sideload taking too long to start
Click to expand...
Click to collapse
You need to get back to fastboot, and run the flash all bat file from the full factory image.
TonikJDK said:
You need to get back to fastboot, and run the flash all bat file from the full factory image.
Click to expand...
Click to collapse
I tried that but I keeps giving me an error, I'll post it when I get the chance
Problem SOLVED! used video by MaowDroid "Pixel 2 (XL): Un-root and return to stock using factory images"
fury683 said:
Does your PC recognize the phone in Fastboot mode? I would try flashing the full factory image again. Ensure you have the latest platform tools and the correct firmware for your device.
Click to expand...
Click to collapse
I have the same issue, except my computer will not recognize the device in fastboot. I tried two different computers, Windows 10 and laptop running Linux.
wergrun said:
Problem SOLVED! used video by MaowDroid "Pixel 2 (XL): Un-root and return to stock using factory images"
Click to expand...
Click to collapse
Followed the video, but I get an error:
'FAILED (remote: Failed to write to partition Not Found)'
I've tried: bootloader, bootloader_a, bootloader_b and bootloader_other and get the same error.
I'm stuck....
SS823 said:
Followed the video, but I get an error:
'FAILED (remote: Failed to write to partition Not Found)'
I've tried: bootloader, bootloader_a, bootloader_b and bootloader_other and get the same error.
I'm stuck....
Click to expand...
Click to collapse
I did get that too but it was because I forgot to put a space after "bootloader_a ", are you Stuck at around the 9 minute steps?
Yes, right around the end at 9 minutes. Everything works fine - bootloader, radio, etc. When I get to the end of the img zip file I get this message:
checking product...
OKAY [ 0.060s]
checking partition-exists...
FAILED (remote: variable not found)
finished. total time: 0.360s
I am at a loss.

Bootloop to fastboot

Bootloop to fastboot after being on dp3, and restoring carbon. I tried fastboot boot twrp.img, but it fails....I also tried fastboot flash it, it does, but still reboots to fastboot. Any suggestions?
I assume you had TWRP installed when this condition occurred, and trying to boot TWRP just sent you to fastboot?
What was the exact error message when trying to fastboot boot TWRP?
suzook said:
Bootloop to fastboot after being on dp3, and restoring carbon. I tried fastboot boot twrp.img, but it fails....I also tried fastboot flash it, it does, but still reboots to fastboot. Any suggestions?
Click to expand...
Click to collapse
try this one
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
had the same problem and it helped
redpoint73 said:
I assume you had TWRP installed when this condition occurred, and trying to boot TWRP just sent you to fastboot?
What was the exact error message when trying to fastboot boot TWRP?
Click to expand...
Click to collapse
It sends the file...then I get a remote error. I tried fastboot flash too. It completed, but still boots to fastboot. Guess msm tool is needed. This phone is a pita.
I cannot get twrp to boot.....Phone refuses to boot it. WTF???
Have you tried this specifically?
Code:
fastboot flash boot recoveryname.img
I was stuck in fastboot yesterday after doing a TWRP restore. The issue was I did a backup and restore including boot and system/vendor.
My thread from a few days ago: https://forum.xda-developers.com/oneplus-7-pro/help/please-help-fastboot-boot-loop-twrp-t3949952
i.Design said:
Have you tried this specifically?
Code:
fastboot flash boot recoveryname.img
I was stuck in fastboot yesterday after doing a TWRP restore. The issue was I did a backup and restore including boot and system/vendor.
My thread from a few days ago: https://forum.xda-developers.com/oneplus-7-pro/help/please-help-fastboot-boot-loop-twrp-t3949952
Click to expand...
Click to collapse
LOL...Um, yes.
Use the All-In-One Tool and flash a fastboot firmware zip (you can find downloads in the software itself). After flashing your back on OOS and can use fastboot to boot TWRP again, then install or restore your rom

Flash TWRP via fastboot android 10

Hello guys, as we known that it is unable to use command in fastboot to boot into TWRP if we are on Android 10 (both OOS and Custom rom) at the moment, so here is the simple command allow us to do that if you want to roll back android 9 or any rom by TWRP
fastboot flash boot_a <twrp name.img>
fastboot flash boot_b <twrp name.img>
fastboot reboot
Your phone will automatically boot into TWRP, so you can flash another rom
Can anyone confirm this works?
I tried something similar when I first installed OOS 10, and I successfully booted TWRP, but I ended up getting a bootloop (stuck at the g.co/ABH warning thing) when I rebooted to system. I don't know if I did something wrong, or flashing twrp to both boot partitions caused it.
I would try again, but I'm on a critical work trip until the end of the month, so my phone's uptime is expected to be 100% until then.
worked for me while anything else didnt
LazerH said:
worked for me while anything else didnt
Click to expand...
Click to collapse
Does it wipe your data?
Didn't work for me. My boot image was patched already this is probably why.
ok, I tried this, but as reported above, now also stuck on this same: "I tried something similar when I first installed OOS 10, and I successfully booted TWRP, but I ended up getting a bootloop (stuck at the g.co/ABH warning thing) when I rebooted to system. I don't know if I did something wrong, or flashing twrp to both boot partitions caused it."
How do I resrore operation for my phone? (help?)
Well, I met this issue before, and ended up with using this method to successfully boot into twrp.
This issue seems to appear on OOS, when I using `fastboot boot xxx.img` on other ROM like omni, I'm able to boot into twrp, thanks!
can someone help me please. my phone is stuck in a fastboot bootloop. everything I try doesn't work.
fastboot boot TWRP.img NOTHING
tried your solution above and still nothing
Still stuck in fastboot this is what I get:
PS C:\Users\Les Brown\Desktop\OnePlus 6> fastboot boot twrp-3.3.1-17-enchilada-Q-mauronofrio.img
downloading 'boot.img'...
OKAY [ 0.617s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.655s
@killathenoob Download DECRYPTED OOS 10.3.0 with this help if you don't really know what to do with this.
For others people (and you if you want to root or just install TWRP after fresh OOS10 Decrypted install) don't forget to OEM unlock before doing anything.
Download this
Copy "twrp-3.3.1-17-enchilada-installer-mauronofrio.zip" into internal storage of your OP6
Power it OFF
Power it ON in fastboot mode
Launch "Boot TWRP.bat"
Connect your OP6 to your PC and wait for TWRP to boot
Install twrp-3.3.1-17-enchilada-installer-mauronofrio.zip
Reboot to recovery and install magisk if you need to.
Source
Hope I helped a bit.

Categories

Resources