Hi every one.
I just got my new Xperia Z3 Dual sim , yesterday , And since when i got the phone , 3-4 times it did happened to me.
" Touch Screen not working for about 2-3 second" and after That it will be OK again. usually it happens when I'm typing and always it happens on same spot of my touch screen, some where near the A and S Key of the standard keyboard. after that , it will be OK , and no problem at all...any body have an Idea? is it hardware issue? or software problem? any body else have same trouble?
thanks for your comments.
I think it is a software problem. I had the same problem one day but when I reset everything is back in order, but do not forget to make a backup of everything that is important to you
Never mind
vista_66 said:
Hi every one.
I just got my new Xperia Z3 Dual sim , yesterday , And since when i got the phone , 3-4 times it did happened to me.
" Touch Screen not working for about 2-3 second" and after That it will be OK again. usually it happens when I'm typing and always it happens on same spot of my touch screen, some where near the A and S Key of the standard keyboard. after that , it will be OK , and no problem at all...any body have an Idea? is it hardware issue? or software problem? any body else have same trouble?
thanks for your comments.
Click to expand...
Click to collapse
Got a Z3 Dual last saturday and all is working flawlessly. Restore software perhaps?
Related
I have had this problem for awhile , My capacitive buttons have stopped working.
I remember dropping the phone from a short height but the phone has no physical damage , it had no problems for along time and then suddenly one day they stopped working fully.
Im on the latest Android Revolution HD Rom and have tried a reinstall.
I have also opened the phone up to look for any sign of internal damage but nothing.
The touch screen itself works great the home botton works sometimes if u get it in the right spot but other then that nothing.
Anybody got any ideas? New Digitizer?
Would like any help.
Cheers
Greg
Hard to think nobody has had this problem.
Bump bump bump , great song that one
A while ago my Fit that's practically new started to work all by itself . Problem is that touch screen wont work properly. When I unlock the phone it works good, but after a few moments it starts apps all by itself, then I lock it, unlock again... I tried every single rom, custom, stock, even 2.2.1, but nothing worked. After rom flashing phone works fine for 2-3 days, and then it starts to annoy me again. It never fell into water, on the floor or something like that...
Does anyone know what the problem is? Is it hardware or software ??
it must be a hardware problem
sometimes dust accumalates beneath the screen and above the real touchscreen
as ur phone is new give it to the service center under warranty
hope it works
Answer
I also think it's hardware, but guys from service center will definitely solve this issue...
sometimes.. i have the same problem.
i don't understant english very well, i speak spanish but i think i understant your problem, and it's the same that my's!
sometimes.. when i want to unlock, touchscreen not work..
i think that its a software problem
i have never faced such prob but long ago i had a problem of wrong pressing buttons... and i just restarted it now its fine... well before goin to a service center make sure tat u are on stock rom.. try installing full package via odin it may solve your problem just try once..
Lost touchscreen handling in upper and lower part of my screen!!!Pls Help!
I have a rooted device with xsba's custom rom (4.0.4). The problem started before this ROM. I am pretty sure that this is no rom issue. I have flashed the phone several times with numerus roms. Problem persists.
I already have changed touchscreen once because of a serius fall (broke) approximately 6 months ago.
These are all the facts. Before xsba's rom i used thiaiz o3d. (2.3.7). The problem started one day that i hadn't charged the phone up. When the battery fell under 5 % the phone went berserk. (Numerus button presses all the time)
I couldn't even reboot. When I finally turned it off by removing battery and restarted the phone the upper field of touchscreen of the phone never worked again.
Yesterday i failed to charge again.ASfter finally restarting the same issue appeared in the lower field of touchscreen. Please advice!!!!!!!!
Is there a way to solve this problem without changing the touchscreen?
dim2004 said:
Lost touchscreen handling in upper and lower part of my screen!!!Pls Help!
I have a rooted device with xsba's custom rom (4.0.4). The problem started before this ROM. I am pretty sure that this is no rom issue. I have flashed the phone several times with numerus roms. Problem persists.
I already have changed touchscreen once because of a serius fall (broke) approximately 6 months ago.
These are all the facts. Before xsba's rom i used thiaiz o3d. (2.3.7). The problem started one day that i hadn't charged the phone up. When the battery fell under 5 % the phone went berserk. (Numerus button presses all the time)
I couldn't even reboot. When I finally turned it off by removing battery and restarted the phone the upper field of touchscreen of the phone never worked again.
Yesterday i failed to charge again.ASfter finally restarting the same issue appeared in the lower field of touchscreen. Please advice!!!!!!!!
Is there a way to solve this problem without changing the touchscreen?
Click to expand...
Click to collapse
Now , you need to go to developer options in the settings and enable show touches option. Then you touch and slide to the parts that don't work . If you see the line going there , then it's a problem with your ROM. If it's not , then you possibly have a broken touchscreen. Check the contact of the touchscreen ribbon and see if it's tightly sitting on the slot , press it down and try again.
If it's not working , you have no choice but to replace the touchscreen. You can buy one off eBay for 19 dollars and free shipping. It's made in China but it works well without problems for the past 6 months with my device.
Hope I helped.
Cheers!
Sent from my LG-P920 using xda premium
boltthrower56 said:
Now , you need to go to developer options in the settings and enable show touches option. Then you touch and slide to the parts that don't work . If you see the line going there , then it's a problem with your ROM. If it's not , then you possibly have a broken touchscreen. Check the contact of the touchscreen ribbon and see if it's tightly sitting on the slot , press it down and try again.
If it's not working , you have no choice but to replace the touchscreen. You can buy one off eBay for 19 dollars and free shipping. It's made in China but it works well without problems for the past 6 months with my device.
Hope I helped.
Cheers!
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I have already checked the rom.the problem is not there.I have checked the contact of the ribbon yesterday and everything was fine.The touchscreen that i have is a chinese one.And it lasted for 6 months or so. So you might want to get ready for a new one as well!!!!!
I am going to buy one for me from ebay today. I have no choise as it appears.
I feel the need to thank you for your time and for the solutions that you provided me with.!
You have been most helpful.
HI did you ever solve this? I have the same problem, or very similar with middle and lower sections of screen dead, strange ghost touches and screen going crazy every so often, all started after I rooted phone. Was it just a broken touch screen? Cheers
gadget9192 said:
HI did you ever solve this? I have the same problem, or very similar with middle and lower sections of screen dead, strange ghost touches and screen going crazy every so often, all started after I rooted phone. Was it just a broken touch screen? Cheers
Click to expand...
Click to collapse
My friend i changed touchscreen and problem solved.
Thanks for the reply, good to know that it solved your problem, I have a new screen ordered, hopefully will solve mine too:good:
Hello everyone, I have a problem with the screen, a long time ago a printer tonner hit my screen, it's started to show wrong resolution (no hd) so I send it to change the part that has the problem. They change it and the screen never light up, the phone turn on, the touch screen work perfectly, the sound, all the buttoms but the screen it's black... Only I can see it with airdroid... Someno know what it's happening?. Obviously they doens't charge me the work. I'm from Argentina and the model is C2105, I send the phone to my brother in Spain and there couldn't make it work.
Never gave me an answer
Ferdesor said:
Never gave me an answer
Click to expand...
Click to collapse
Maybe no one here had any solution for this issue, because it is a hardware problem, so no one can help in software manner.
Maybe but this thread it's for all the problems I think.
Hi all,
My old (now GF's) Z3 reboots after to much movement or putting down to hard. I'm assuming this is because it might have fallen to many times (with cover), with the result that the gyroscope became half defective. It seems to work still in other occasions (if the phone doesn't reboot).
Is there anyway to know for sure, and if I can repair this?
Kind regards,
Ruben
I could have the same issue as mine fall several time and now, it still works but once boot is complete, no time to "open" it that it reboot. Tried to put it in the fridge and didn't helped so it's not heat issue and I have no idea why this is rebooting because it still works .. but reboot at the end .. :|
Anyone ? Tried to recovery with Sony Companion which worked but still reboot after saying hello ...