Related
I am starting this thread so all issues related to SlimKat Rom can be documented in one single place. Please post your Questions & Answers in here instead of in the SlimKat Rom Thread, lets try and keep that thread clean.
SlimKat ROM Thread: http://forum.xda-developers.com/showthread.php?t=2511512
All Credit goes to the developers, Please support them for continued development
I will try my best to keep the thread updated and have questions and solutions posted in the first three posts of this Thread:
How to Install SlimKat ROM
Assuming you have already rooted, unlocked boot loader and installed custom recovery. If not there are multitude guides to do so, search in the forum.
Step 1:
Download the following:
Current SlimKat ROM: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/979-hammerhead
Note SlimKat Rom is in beta currently
Current SlimGapps: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/978-addons4-4/downloads/dlsearch
Note Slim Gapps are also in Beta, You can choose to download the full Slimgapps or the minimalgapps thats your choice. You can also download the photosphere addon.
Current SuperSu: http://forum.xda-developers.com/showthread.php?t=1538053
Step 2:
Place the downloaded file onto your nexus 5 using the provided cable, alternatively you can also download the files directly onto your phone using the browser.
Reboot into Recovery
Wipe data/factory reset (required)
Wipe Cache Partition (required)
I also always do the following (optional)
In mounts/ Storage
Format /system (optional)
Format /data (optional)
Format/cache (optional)
These are not necessary but I have made it a habit to do so.
Once you have performed the required resets, select Flash Zip file and flash in the following sequence
Flash SlimKat Rom
Flash SlimGapps
Flash SlimPhotoSphere (optional) Note: Does cause audio lag in recorded video with some kernels also videos are darker after photosphere flash. See Q&A section
Flash Kernel ( optional: only if you want to use a custom kernel)
Flash SuperSu ( I prefer SuperSu, SuperUser does not work properly for Me)
Reboot
Now your good to go and setup your phone.
Step 3: (optional)
~ Note for ART I follow this procedure:
After Flashing, once the phone starts I skip through the setup screen
Go to Settings-> About-> tap on build 7 times to enable developer options
Go to Settings-> Developer Options -> Select Runtime --> Art
Reboot and let it finish what its doing takes 10-15 mins.
Once done setup your phone how you like.
Reserved : Guide To SlimKat Features
Features And Guide
Once I have time I will break down all the slim settings and what they do
Features Not Included
PIE - Can be installed using Xposed Framework
HALO - Can be installed using Xposed Framework
NOTE: Xposed Framework does not play nice with ART, You will need to stick with Dalvik to use Xposed.
Feature Request
I will update this as users request features but please dont request features that can be added via addons such as xposed. There is no point adding those features to the ROM, those who want them can always install via Xposed
Keyboard Automatically Switching to Numeric Keypad when a field requires numbers only
Questions and Answers
Frequently Asked Question
http://slimroms.net/index.php/faq
These Are for SlimKat 4.4.2 beta 1.95 + Slim_AIO_gapps_4.4.2 beta1.x
These will be updated/removed as SlimKat updates
DPI/ Screen Issues
[Q] What are the default DPI's
Stock Kitkat = 480
Stock SlimKat = 361
Lowest DPI working for me = 370
[Q] Water in the Google Maps app is distorted, streaked or all over the place when zoomed out
Its a DPI issue, this is how i resolved it:
Download: Rom Toolbox lite ( Free) from PlayStore
Run app -> Swipe left to switch tab to performance --> click build.prop Editor button
on this new screen-> swipe right to bring out menu on the left side of the screen
First option is LCD density Click that-->change Value to whatever you want --> click ok and reboot
once Rebooted do the following :
Settings-> Apps-> Maps-->clear data, also clear Cache--> Force Close
Open Maps and confirm everything is working.
Some users have been able to get the maps to work properly at 361 DPI, but the lowest value at which it will work for me is 370. Default Stock Kitkat DPI is 480. Default Stock SlimKat DPI is 361
[Q] Everything is too small on default SlimKat, how can i fix that
two solutions:
go into settings-->display-->font-->change font size to make it bigger
change DPI:
Download: Rom Toolbox lite ( Free) from PlayStore
Run app -> Swipe left to switch tab to performance --> click build.prop Editor button
on this new screen-> swipe right to bring out menu on the left side of the screen
First option is LCD density Click that-->change Value to whatever you want --> click ok and reboot
Default Stock Kitkat DPI is 480, stock SlimKat DPI is 361, 400 ~ 420 DPI works best for me
Recovery
[Q] TWRP asking for a password, even though user never setup a password
When TWRP asks for a password, hit cancel.
Then go to Wipe and Factory Reset.
If that doesn't work, then restart your recovery.
If that still doesn't work then try reflashing TWRP again.
Camera
[Q] What is True View in the Camera App
True view is a camera feature to show the whole field of view of the camera.
By default the field of view is stretched and cut on the sides to fit fullscreen.
http://slimroms.net/index.php/faq/slimbean/323-what-is-true-view
[Q] Why is the Camer app Missing HDR+
HDR+ and Photosphere are closed-source. AKA no way to be built from source and must be distributed as an add-on.
Flash photosphere camera if you want HDR+.
http://forum.xda-developers.com/showpost.php?p=48832042&postcount=27
Note: PhotoSphere Addon currently adds a audio lag in recorded videos and recorded Videos are much darker, Read Q&A below about audio lag when photosphere is installed, link for photosphere is in the first post ( Slim gapps/addons)
[Q] Audio Lag in recorded video after Installing Slim PhotoSphere
Flash a different kernel, that will fix the issue
confirmed fixed with trinity.
in Recovery, without wiping:
Flash ROM
Flash Gapps
Flash PhotoSphere
Flash Kernel of choice
Flash SuperSu
Reboot
NOTE: Videos are much darker when Photosphere addon has been installed
Misc
[Q] How do I access the chamber of secrets on SlimKat
http://forum.xda-developers.com/showpost.php?p=48830608&postcount=25
[Q] Where are the QuickRecord recordings stored, are they cleared at boot and are they overwritten
/data/data/com.android.systemui/files/
It's never cleared from a reboot, but yes, rewritten each time you record.
http://forum.xda-developers.com/showpost.php?p=48832011&postcount=2577
[Q] Where is the clear all in the recent apps list
Clear all is not there as it is not needed, the list just shows the recently ran apps and provides the means of switching between apps quickly. Android will kill apps when needed there is no need to kill apps
[Q] I have no Mobile Network ( not data but no coverage at all)
This applies to only those who have no mobile network i.e they do not have a signal at all on their device and it does not say no service.
You somehow wiped the radio firmware, That needs to be restored.
http://forum.xda-developers.com/showthread.php?t=2514095
[Q] What is ART and what does it do
If you really need to know what ART is then you should not be using ART.
ART stands for Android Run Time, it is an experimental run time which is being developed by google to replace the current dalvik run time. Once released users would be able to get better performance and better battery life.
Currently, as ART is in experimental stage ( I would say Alpha, not even beta) the benefits of switching to ART are minimal. Not all apps are compatible with ART and most users will not see any performance or battery life improvements.
Thats why google buried it deep into the settings. Use at your own discretion. I suggest staying with Dalvik run time till further progress has been made on ART.
Un-Answered Questions
reserved
Regarding the last Q: Modem and EFS restoration is explained here: http://forum.xda-developers.com/showthread.php?t=2514095
Sent from my Nexus 5 using Tapatalk
lyrois said:
Regarding the last Q: Modem and EFS restoration is explained here: http://forum.xda-developers.com/showthread.php?t=2514095
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks, updated the Q&A
One last question...screen recording how do I get that again...?
Sent from my Nexus 5 using Tapatalk
Galaxysm said:
One last question...screen recording how do I get that again...?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I'm not sure how to get that, I think you have to connect the device to the computer and use something in the SDK to be able to record screen, I could be wrong. Try searching for it. If I find a solution I'll let you know.
Sent from my Nexus 5 using Tapatalk
just a suggestion what do you think to move this thread to here
http://forum.xda-developers.com/custom-roms
would be more centralized and maybe more ppl would see the q&a thread
kufikugel said:
just a suggestion what do you think to move this thread to here
http://forum.xda-developers.com/custom-roms
would be more centralized and maybe more ppl would see the q&a thread
Click to expand...
Click to collapse
Yes, i think that would be better. My Apologize for starting the thread in Q&A section. Could a Moderator please move the thread to the custom rom Q&A section or if someone knows how to move it let me know and ill move it.
Thanks
Nice work.
maybe add LMT to the "Features Not Included: PIE" section
shawnbon206 said:
Nice work.
maybe add LMT to the "Features Not Included: PIE" section
Click to expand...
Click to collapse
Thanks.
I am not sure if and when PIE is implemented if it would include LMT with it therefore i left it out. I believe the xposed framework PIE does have LMT support.
Hope there are enough people here to help me out. I've been using Slim ROMs for a couple years on G-Nex and now Nexus 5. On the last couple releases I've been having issues with Google Maps not getting a GPS fix, or when it does get a fix it's off by nearly a mile. GPS Data, Waze, Gas Buddy, etc. all work fine. After spending nearly a day re-flashing the ROM, app, clearing data, etc., I finally tried another ROM (Purity) and discovered that Google Maps gets a fix in less than 10 seconds and is within 20' accuracy. I used the latest Slim Gapps on Slim 1.95 and the CM Gapps on the Purity ROM. Has anyone had similar problems?
From my Nexus 5
AquilaDroid said:
Hope there are enough people here to help me out. I've been using Slim ROMs for a couple years on G-Nex and now Nexus 5. On the last couple releases I've been having issues with Google Maps not getting a GPS fix, or when it does get a fix it's off by nearly a mile. GPS Data, Waze, Gas Buddy, etc. all work fine. After spending nearly a day re-flashing the ROM, app, clearing data, etc., I finally tried another ROM (Purity) and discovered that Google Maps gets a fix in less than 10 seconds and is within 20' accuracy. I used the latest Slim Gapps on Slim 1.95 and the CM Gapps on the Purity ROM. Has anyone had similar problems?
From my Nexus 5
Click to expand...
Click to collapse
I just reflashed slimkat on my phone, took less then 5 seconds for it to get a GPS lock. Check the following:
Settings-> locations -> mode
Make sure high accuracy is selected
Also are you using a custom kernel ?
Flash sequence for ROMs is
Slimkat ROM
Slimgapps
Kernel ( if using custom kernel)
Supersu ( supersu always comes last)
Reboot.
Sent from my Nexus 5 using Tapatalk
Anyone have any issues with the stock Slim Explorer app. I've never really used it before as I've always been an ES Explorer user but want to switch having the auto toggle TRDS modes. The app loads up but as soon as I scroll the screen the app closes and I get a "Slim Explorer has stopped" message. I've seen it in the past a handful of times I went to change DPI with it before installing ES. I did a complete clean install(ie. manually wiped everything and re-downloaded and re-setup all my apps instead of restoring them with Titanium), sha matches, so I can't think of anything else that could be the issue. Maybe it doesn't agree with Super SU???
Yep, did all that except for the SuperSU bit. I did use SuperSU on the Purity install though but haven't had any problems with the built in Superuser before. I'll nandroid back to the Slim ROM to give it a try. It was with the stock kernel.
From my Nexus 5
AndrasLOHF said:
Anyone have any issues with the stock Slim Explorer app. I've never really used it before as I've always been an ES Explorer user but want to switch having the auto toggle TRDS modes. The app loads up but as soon as I scroll the screen the app closes and I get a "Slim Explorer has stopped" message. I've seen it in the past a handful of times I went to change DPI with it before installing ES. I did a complete clean install(ie. manually wiped everything and re-downloaded and re-setup all my apps instead of restoring them with Titanium), sha matches, so I can't think of anything else that could be the issue. Maybe it doesn't agree with Super SU???
Click to expand...
Click to collapse
U mean simple explorer ?
Its working for me.
It could be super user, I've had issues with it
First post on this forum has link to supersu, download zip file flash in recovery. C if that solves the issue
Sent from my Nexus 5 using Tapatalk
AquilaDroid said:
Yep, did all that except for the SuperSU bit. I did use SuperSU on the Purity install though but haven't had any problems with the built in Superuser before. I'll nandroid back to the Slim ROM to give it a try. It was with the stock kernel.
From my Nexus 5
Click to expand...
Click to collapse
I've had issues with super user so always use supersu, but maps has nothing to do with either.
Did u check the settings?
Also sometimes you have to be outside to get a GPS lock,
Also try this:
Settings -> apps-> maps.
Clear data clear cache force close.
Reboot
Go outside and open maps c if that fixes it
Sent from my Nexus 5 using Tapatalk
OK, but it will be a while - when I went into recovery (TWRP) it asked for a password (which I haven't set) then failed to backup the existing ROM.
Sent from my Nexus 5 using Tapatalk 2
fruitsalt said:
U mean simple explorer ?
Its working for me.
It could be super user, I've had issues with it
First post on this forum has link to supersu, download zip file flash in recovery. C if that solves the issue
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have Super SU installed and working already seeing as I use Faux kernel as well as I've always had issues(even on a SlimBean port on Evo LTE)with Superuser unmounting the system as RW. It's weird. It only happens when I scroll from within the emulated/legacy/0 storage. I can scroll within the device partition and change settings just fine.
Do you use ART??? Only other thing I can think of.
Edit: Added a screenshot to the post as well as a bug report
∆Thread navigator:
•What is ultimate project
••Why cm11
•••What is inside the package
••••How to install
•••••credits
••••••developers talk
•WHAT IS THE ULTIMATE PROJECT?
its a collection of mods and apps that will make your life with CM11 better than ever
••WHY CM11?
cyanogen mod is a free community and all most every one are using cm11 or 12 and i just though that it would be great to share my experience with you
•••SO WHAT IS INSIDE THE PACKAGE?
1.Quick boot mod (this will make your cm11 shut down and boot up faster)
2.quick boot.apk (this is for the unofficial cm11s if the quick boot mod didn't work you can use this app)
3.modded Google camera (better image and video quality)
4.greenify(battery and ram saver by hibernating the background apps)
5.Gapps xxsmall edition( with Google now support and gmail)
6.universal blunder ( a script to delete all unnecessary files and junks on all mobile brands)
7.adrenaline engine boost( a script to give you a better performance and gaming)
8.Emoji (all android 4.4 emoji)
9.lollipop sounds (the new android 5.0 sounds)
10.project mod treble swap ( this will gave you more ram which means more speed and performance )
11.project mod boost script special edition ( this will gonna make your android performs like an alien device )
12.lollipop launcher( the new android 5.0 launcher)
•••HOW TO INSTALL:
download the package from here
https://db.tt/thcX2rkH
1.go to recovery and flash the package
2.to activate quick boot mod go to developer options
3.to use an app just go to app drawer and open it
4.to activate adrenaline engine go to terminal and enter the code
su
boost
5.some greenify features need xposed framework
6.project mods are automatically activated
•••••CREDITS:
1.God
2 @Abhinandan Trilokia for the universal blunder
2 @ImbaWind for adrenaline engine
3 @madkita for Google apps
4 @madkita for lollipop sounds
5 @k1ks for project mods
6.Cyanogen for cm11
7.speed software for root explorer
8.mobiant for lollipop launcher
9.dropbox for the cloud server 10 @blade44 for the quick boot mod
11.if your app or mod is here and i didn't mention your name on credit please pm me so i can add you
••••••DEVELOPERS TALK:
if you you know an app or script or mod that will help just write it and I will add it on the next release
if you like my work and want to do me a favour just click the thanks button and no thing else
Now try it and give me your feedback
Please keep the threat clean
Hi there, I don't think your file is correct because nothing happens after flash. I am sure I've d/l the full file correctly.
i have flashed the file over cm11 armv6 and its working did you wipe?
madkita said:
i have flashed the file over cm11 armv6 and its working did you wipe?
Click to expand...
Click to collapse
Yes, I do wipe and make a clean flash from scratch. My phone is HTC one X with CM11 ROM.
but i say no need for wipe
open your app drawer if you found the mentioned apps that means installed successfuly
madkita said:
open your app drawer if you found the mentioned apps that means installed successfuly
Click to expand...
Click to collapse
Sorry, maybe I didn't make it clear. what I was doing is fully wipe and flash CM11 ROM for HTC one X from scratch, and afte rall my google apps abd data is download back to normal from server, and then I flash your mod WITHOUT WIPE. But I don't see any app or other mod inside the system after reboot. I check it with root explorer. So I think I do follow your step, right ? Do you ever try to clean-wipe flash from scratch and then flash your mod ?
i checked it again and it works without aby problems on a clean install
chihliouma said:
Sorry, maybe I didn't make it clear. what I was doing is fully wipe and flash CM11 ROM for HTC one X from scratch, and afte rall my google apps abd data is download back to normal from server, and then I flash your mod WITHOUT WIPE. But I don't see any app or other mod inside the system after reboot. I check it with root explorer. So I think I do follow your step, right ? Do you ever try to clean-wipe flash from scratch and then flash your mod ?
Click to expand...
Click to collapse
Check if you had system partition mounted when you were installing the package, if there weren't any files installed thetn this might be the problem.
@shiftyHungary did it work for you
Good Luck !!
can any one confirm that it works
Wowza...just beathed alot of extra life into my ZTE Awe. Lolipop launcher and quickboot dont work on my device, but i can live without them. Well done
Quick boot mod only works on official cm11 builds and some other builds like armv6 build but the quick but apk works on any android device
The app just force closes whenever I try to open it. We at the Awe forums on androidforums are running an unofficial build, so it makes sense to me the mod wouldnt work but the app is not as well. Again, I can do without. Everything else, minus the launcher, appears to be working.
Though I can't find any difference when running the "boost" command. What is it supposed to do exactly?
its apically for games
Well again I didn't notice much of a difference with or without running it. Real Racing 3, GTA San Andreas and Modern Combat 4/5 run significantly better than before the mod. I was able to even record some decent game plays on each with Rec Screen Recorder with only about a 10fps drop and minor lag, something I struggled to do initially. All in all, I'll confirm this works and have already spread the word to my fellow Awe users.
Many thanks for your hard work
I’m presenting my 1st ported ROM MIUI6_v5.7.9 for Xolo Q3000, with special thanks to:
1)Xolo for the awesome phone at affordable price,
2)MIUI for the wonderful rom,
3)Turkdevs.com & SmiLeToLiFe for the ported rom,
4)Dr. Avinash for MIUI6_Boot Logo and TWRP rev2 recovery,
5)Of course, me for Repartitioning Xolo Q3000. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1)Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2)Before proceeding, Back up your Current Rom (Failsafe).
3)/System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4)SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1)Put the downloaded MiuiV6_5.7.9_By_SmiLeToLiFe.zip in sd card.
2)Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3)Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4)Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5)Install MiuiV6_5.7.9_By_SmiLeToLiFe.zip
6)Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7)Immediately, Install the MIUI6_5.7.9_Patch.zip
8)Again, Wipe Cache & Dalvik Cache.
9)Reboot System.
10)1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
WARNING:I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1)Everything from MIUI working fine
2)Latest Google Keybord
3)WSM Tools Pre-Installed
4)SuperUser & BusyBox installed
5)MX Player as default media player
6)For full changelog, visit: http://en.miui.com/thread-130282-1-1.html
Bugs:
No major bugs, till now, few minor bugs are as follows:
1)Some of the Icons missing (I Guess, it needs Custom Kernel!!).
2)Dialer Crashes for USSD commands.
3)Report, if you found any.
Download Links:
1) MIUI6_5.7.9_Rom
2) MIUI6_5.7.9_Patch
3) Audio Settings Fix
Note: For Engineer Mode, dial *#*#3646633#*#*,
All the Best, Guys:good::good::good::good::good:
Screenshots:
1) MIUI6_5.8.6
2) MIUI6_5.7.9
Updates:
Note: Don't wipe cache & Dalvik Cache before, but don't forget to wipe them after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
downloading
will post review by tomorrow
sachin.r.fulzele said:
Updates:
=> MIUI6_5.7.9 To 5.7.16_Update
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at:
=> MIUI6_5.7.16 To 5.7.23_Update
Full changelog at:
Click to expand...
Click to collapse
Bro any patch for dailer patch...
mujaid714 said:
Bro any patch for dailer patch...
Click to expand...
Click to collapse
Updates are uploading, It has been solved. Wait for link.....
Quick update
From is working fine
Smooth like butter
Titanium backup working fine
WiFi isn't working for me
Have tried tethering from other mobile and WiFi dongle
Will try a proper WiFi router tomorrow morning.
Update
It was my problem
Didn't do a proper flash
Everything working fine now
Awesome performance so far
Sent from my HM NOTE 1W using XDA Free mobile app
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Maybe I should reinstall the ROM
Reinstalled and everything working like a charm
Sent from my HM NOTE 1W using XDA Free mobile app
Link for MIUI6_5.7.9 To 5.7.16_Update is updated
mujaid714 said:
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Click to expand...
Click to collapse
Notification lights are limited to LED lights, to enhance battery life.
Camera capacity was not shown in megapixels, but MIUI utilizes full camera capacity (supported by Hardware).
Perfect port bro, everything working fine, rom is smooth n stable, found some bugs like fc settings when opening audio settings
awesome performance
thanks @sachin.r.fulzele for the awsum rom...smooth & very stable
wifi & mobile network work well
otg works well
dialer problem solve with MIUI6_5.7.9 To 5.7.16_Update
great sound
all games run very well(including high end)...no lag
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Fonts working on this rom?
aaayush_singh said:
Fonts working on this rom?
Click to expand...
Click to collapse
Yup..i tried one or two...got error unfortunatly theme closed...
I m getting somekind updates fro miui. Can it b updated...
mujaid714 said:
I m getting somekind updates fro miui. Can it b updated...
Click to expand...
Click to collapse
no dont do that
our phone isnt officially supported so those updates will get u into bootloop
sachin.r.fulzele said:
Updates:
Note: Wipe cache & Dalvik Cache before & after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
Click to expand...
Click to collapse
plz upload the 5.7.23 update
rohitsinghpu said:
plz upload the 5.7.23 update
Click to expand...
Click to collapse
Testing in progress......
rohitsinghpu said:
thanks @sachin.r.fulzele
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Click to expand...
Click to collapse
I guess!! you haven't wiped cache & Dalvik Cache before/after installing update. So, it's showing same version no. even after update.
Missing icons are due to lacunae in stock kernel( I've tried a lot, but Needs custom kernel)
Mi4i is a high end premium device .But the sound quality is not that great for listening to songs game sound etc.
We have many audio mods available for android devices on XDA forums.
But installing some of them gives bootloop and even requires magisk and systemless superuser support which is not available for our device.
After hours of search I found a very good audio mod by ANANDMORE @xdaforums know as Bio hazard sound mod
(Original thread link : forum.xda-developers.com/android/software/sound-mod-biohazard-android-infected-t3373888)
This mod works like a charm for the device it provides very good clarity sound and even increases the audio by several times
( All download links in the post are by Anandmore he is the original developer of this mod and I am just sharing Hit a thanks button or donate him if u like this mod Thank you)
How to install : * If you are running on any of the ROMs by ferrari-devi team(Miui not tested)
*Boot into twrp recovery and flash this file BioHazard-SRC-I zip file
(Link : https://www.androidfilehost.com/?fid=457084094631641289)
*No need to wipe any cache or dalvik cache in the recovery
*Boot into system and your done
*After installing the mod the only apps that you have to see in the drawer are ViPER4Android & AM3DZirene. The other mods are system files that are activated by default and works In every sound emitted, in all apps, and both in speaker headphones bluetooth etc.
*AM3DZirene app is not working and keeps on crashing but don't uninstall the app ( I ll fix it soon)
*Open ViPER4Android app and your ready to tweak the audio:good:
If u liked the post hit a like to Anandmore for such a great audio mod and
Ferrari- dev team members who are working very hard to support the device
Feel free to contact me in case of errors :fingers-crossed:
Thank you
Does this even solve the low output volume of speakers during call??
Rajat Naik said:
Does this even solve the low output volume of speakers during call??
Click to expand...
Click to collapse
Yes u can try it out make sure u enable extra loud feature in the settings plzz gt back to me if it works for you
Link updated
https://www.androidfilehost.com/?fid=457084094631641289
Guys, if you want Amd 3d work, you must clean Cache in recovery before installing and clean dalvik cache after installing.
Hi all,
did someone find a way to get Dolby Atmos to work on Lineage OS 14 or higher ?
I tried the variations which are provided for the Axon 7 but none of them really works.
The Apps opens but you cannot hear any difference with changeging the settings.
V4A would be also be option.
Any help is appreciated
Kind Regards
Sarbaso
I don't know if this will help, but I have a .ZIP with the Axon 7 Mini Dolby UI and Dolby App... I think you put it in system/vendor/app both of them, or if that doesn't work, you can install them both.
** Do Not Flash In TWRP **
This Is Not A Flashable .ZIP, Maybe Someone Can Make It One But It Isn't Right At The Moment!
** Do Not Flash In TWRP **
https://www.mediafire.com/download/ptw96cbr2so6mlx
sarbaso said:
Hi all,
did someone find a way to get Dolby Atmos to work on Lineage OS 14 or higher ?
I tried the variations which are provided for the Axon 7 but none of them really works.
The Apps opens but you cannot hear any difference with changeging the settings.
V4A would be also be option.
Any help is appreciated
Kind Regards
Sarbaso
Click to expand...
Click to collapse
I uninstalled Audiofx and related audio files using SD Maid Pro. Then I installed the Axon 7 Dolby Atmos through Magisk Manager and it does work. It's not perfect, and the differences in equalizer settings are much more pronounced using good headphones or an external speaker. The one "problem" that seems to stay is volume control. At its lowest, one step above mute, it's still fairly loud from the built-in speakers. It's not my main phone for now, so I haven't tried to "fix it" further at this point.
Sent from my Robin using XDA Labs
marvelljones said:
I uninstalled Audiofx and related audio files using SD Maid Pro. Then I installed the Axon 7 Dolby Atmos through Magisk Manager and it does work. It's not perfect, and the differences in equalizer settings are much more pronounced using good headphones or an external speaker. The one "problem" that seems to stay is volume control. At its lowest, one step above mute, it's still fairly loud from the built-in speakers. It's not my main phone for now, so I haven't tried to "fix it" further at this point.
Click to expand...
Click to collapse
Did you or someone try the .ZIP? I haven't tried it for myself considering I am on the Stock ROM, which already has Dolby.
NewbieGamingYT said:
Did you or someone try the .ZIP? I haven't tried it for myself considering I am on the Stock ROM, which already has Dolby.
Click to expand...
Click to collapse
Hi,
i tried and it is not work on Lineage OS, cannot install them, it says that the package is corrupted. And there are no files to copy to system\vendor\ etc......
So i guess we have still no solution for this.
it is working now
Okay i get finally to work after some research.
Here are the steps which i done:
1. First deinstall AudioFX and CM-Audio Settings ( maybe it has an other name), i use Titanium Backup for this.
2. Install via TWRP the Ainur Auido from the following URL // https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516 ( after that i got no dolby app/settings or anything else where i change settings, because of that i followed Step 3)
3. Install the [UPDATED] ZTE Axon 7 Atmos (2.2.1.7_r1) from the following URL // https://forum.xda-developers.com/android/apps-games/soundmod-axon-7-dolby-atmos-t3412342
Et voilá, now you have dolby Support under LingeageOS....
sarbaso said:
Hi,
i tried and it is not work on Lineage OS, cannot install them, it says that the package is corrupted. And there are no files to copy to system\vendor\ etc......
So i guess we have still no solution for this.
Click to expand...
Click to collapse
Yeah, I tried it on Lineage also. I have the Dolby .apks in that .zip maybe someone can figure out something with them!?
Try this
https://techonation.com/install-dolby-atmos-on-android-without-root/
I froze audiofix.apk, and installed this version dolby from 4pda
bius88 said:
I froze audiofix.apk, and installed this version dolby from 4pda
Click to expand...
Click to collapse
Hello , does it fully work on LineageOS please ????
Rafaru said:
Hello , does it fully work on LineageOS please ????
Click to expand...
Click to collapse
Yes it does but you should install this when you do a clean flash of a rom or it may well NOT work.
i.e wipe system, data, cache, dalvik
install rom
install dolby atmos [ i prefer dolby atmos with viper FX as you have a choice of which one to use and viper is amazing]
install gapps
reboot
Rafaru said:
Hello , does it fully work on LineageOS please ????
Click to expand...
Click to collapse
Works for me, but now I deleted audiofix.apk.
bius88 said:
Works for me, but now I deleted audiofix.apk.
Click to expand...
Click to collapse
You should also delete cyanogen audio service as it serves no function
k500zm said:
Yes it does but you should install this when you do a clean flash of a rom or it may well NOT work.
i.e wipe system, data, cache, dalvik
install rom
install dolby atmos [ i prefer dolby atmos with viper FX as you have a choice of which one to use and viper is amazing]
install gapps
reboot
Click to expand...
Click to collapse
I am asking for brief instructions for installation dolby atmos with viper FX.
@bius88
Go to this post and click on the link and download ViperAtmos 5.5 Sony Beats Edition
https://forum.xda-developers.com/ax...unofficial-t3688005/post75053804#post75053804
wipe system, data, cache, dalvik
install rom
install ViperAtmos 5.5 Sony Beats Edition
install gapps
reboot
delete "audiofx" and "cyanogen audio" services using sdmaidpro [the best at this] or titanium pro
k500zm said:
Yes it does but you should install this when you do a clean flash of a rom or it may well NOT work.
i.e wipe system, data, cache, dalvik
install rom
install dolby atmos [ i prefer dolby atmos with viper FX as you have a choice of which one to use and viper is amazing]
install gapps
reboot
Click to expand...
Click to collapse
Hello k500zm , I have LineageOS installed would you recommend to change to AOPK Nougat by tdm ???
@Rafaru
Yes AOKP is 100000 times better than lineage.
For you you should
wipe system, data, cache, dalvik
install AOKP rom from http://xfer.aokp.co/?developer=AOKP&folder=tulip
install unsu to get rid of Supersu https://forum.xda-developers.com/showpost.php?p=63615067
install ViperAtmos 5.5 Sony Beats Edition
install Magisk
install gapps
reboot
delete "audiofx" and "cyanogen audio" services using sdmaidpro [the best at this] or titanium pro
install Sony Music player from Magisk app
Install substratum from play store
if you want a completely black rom also install
Swift black
Pitch Black
maybe also Spectrum if the power menu remains white
k500zm said:
@Rafaru
Yes AOKP is 100000 times better than lineage.
For you you should
wipe system, data, cache, dalvik
install AOKP rom from http://xfer.aokp.co/?developer=AOKP&folder=tulip
install unsu to get rid of Supersu https://forum.xda-developers.com/showpost.php?p=63615067
install ViperAtmos 5.5 Sony Beats Edition
install Magisk
install gapps
reboot
delete "audiofx" and "cyanogen audio" services using sdmaidpro [the best at this] or titanium pro
install Sony Music player from Magisk app
Install substratum from play store
if you want a completely black rom also install
Swift black
Pitch Black
maybe also Spectrum if the power menu remains white
Click to expand...
Click to collapse
Thanks , I will try and let you know , I guess it's the file "aokp_tulip_nougat_nightly_2018-09-28_ota.zip"
yes it is - hit the thanks button yeah
k500zm said:
@Rafaru
Yes AOKP is 100000 times better than lineage.
For you you should
wipe system, data, cache, dalvik
install AOKP rom from http://xfer.aokp.co/?developer=AOKP&folder=tulip
install unsu to get rid of Supersu https://forum.xda-developers.com/showpost.php?p=63615067
install ViperAtmos 5.5 Sony Beats Edition
install Magisk
install gapps
reboot
delete "audiofx" and "cyanogen audio" services using sdmaidpro [the best at this] or titanium pro
install Sony Music player from Magisk app
Install substratum from play store
if you want a completely black rom also install
Swift black
Pitch Black
maybe also Spectrum if the power menu remains white
Click to expand...
Click to collapse
Hi k500zm , all installed ok , but I can not delete audioFX , don't really know how , I have titanium pro 7.4 and also Root Uninstaller PRO , also cyanogen audio not found , can you help please ?