Database Info

[ROM] SKY VEGA A820L-Version Galaxy S Full FC Pro-Stock rom-ICS4.0.4-flash zip!!!

A820L-version Galaxy S Full FC Pro-version1-ICS4.0.4-zip format!!!
ROM GALAXY S PRO VERSION 01. MADE IN VIETNAMESE
BY HANZOO1504
Upgrade from version rom Galaxy S FULL former FC. Upgrade little impact on performance, interface display battery, waves, unlocked, toggle function are changed to the new icon. Install a lot of new gadgets, have the category that you have selected, match the user's purposes. For example: Yahoo, Facebook, Zing Mp3, TV, Synthesis movies, Reuters, App 2 SD, Block calls, ...
+ Install rom zip.
+ Add 1 wallpaper.
+ Add button to boot into recovery, bootloader, screenshots are on phone startup key. Integrated 4 in 1.
+ Add audio to boot the phone and use your logo.
Fix not to install interface.
Update Fix. Compared with the previous version had significantly lower heat. When turned 3G/Wifi still have warm negligible. But normal mode is cool as ice. Increased smooth stamp 10%. Transparent setting.
Temporary only.
Video Media
http://www.youtube.com/watch?v=1twlqdgjlPM
Photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FORUM : http://choimobile.vn/threads/a820l-phien-ban-galaxy-s-full-fc-pro-version1-ics4-0-4-dang-zip.1791/
FACEBOOK: https://www.facebook.com/groups/581682905181015/
Link download: Click here
Below the attachment post. Only $ 2 you can download the rom. (Just comment 2 times in this topic will be $ 2 to download the rom as you like)
Instructions for installing rom.
I.Request
1.Dien the Root voice (to use all the functionality of the rom)
2. Phone install Clockworkmod 5862 version or higher.
II.Setup
1. Phone connected to the computer. Copy the rom to the phone memory. After copying is complete, unplugging usb, turning off the phone.
3. Recovery (Volume down + Power) and select the format clean to up rom follow the instructions below
- Select the wipe data / factory reset -> Select Yes
- Select the wipe cache partition -> Select Yes
- Select the advanced
wipe cache davik -> Select Yes
wipe battery stats -> Select Yes
After the format is complete, you start up the rom. Select Install zip from sdcard -> Choose zip from sdcard -> Find the rom -> Select Yes install.
4. Wait 2-3 minutes for the rom is completed.
5. Click the Back button to exit the CWM main screen and select the "Reboot system now" to restart the phone.
6. The first startup takes longer than 3-5 minutes. The next time you start going faster.
How to fix 1 error.
1. Error slowly unlock screen. Fix: You change to the unlock ICS traditional.
2. Error messages do not vibrate. Fix: Go to message settings-> Settings-> Vibration -> Select Always​

How to Root Samsung Galaxy Y s5360

How to Root Samsung Galaxy Y s5360​ :victory:
If you want to update your Samsung Galaxy Y S5360 with the latest custom ROMs available then you should know that first of all you must root the phone’s system. Without rooting, you can’t enjoy the Android 4.2 or even 4.3 flavor on your own smartphone (we will bring OS updates that can be installed on your phone soon) therefore you must complete the already mentioned operation. In order to help you out I will teach you how to easily root the Galaxy Y on any firmware, the suitable tutorial being explained below
*********************************************************************************************************************************************************
NOTE : I'M NOT RESPONSIBLE ABOUT ANYTHING WILL HAPPEN TO YOUR DEVICE
*****************************************************************************************************************************************************************
Read it before proceeding further
1) Do you have any experience about how to root an Android device? Do, you have even any idea? If the answers are no then I think you should seek the help from such a person to do it. It is because this type of operations has some risks. You may end up bricking your phone.
2) Did you have charged your phone to at least 60%? You need to do it for being on the safe side. If it switches itself off during the root process; your phone could be bricked.
3) Do not try this method on any other phone than Samsung Galaxy Y.
Click to expand...
Click to collapse
************************************************************************************************************************************************************
Requisites
1) A PC
2) Working internet connection
3) USB Data Cable
4) Samsung USB drivers or KIES.
5) A Samsung Galaxy Y S5360 mobile phone.
Click to expand...
Click to collapse
*************************************************************************************************************************************************
Instructions: Stage I
1) Backup your files. You need to keep your important data like contacts, notes or photos etc on your PC or cloud.
2) Open your PC and connect it to internet.
3) Download zip file from here
4) Now connect your Galaxy Y with PC using the data cable.
5) Copy the zip to your handsets SD card.
6) Disconnect it from the computer.
Click to expand...
Click to collapse
*********************************************************************************************************************************************************
Stage II
This stage will be done on your phone so, switch your PC off. xD
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted.
Click to expand...
Click to collapse
*****************************************************************************************************************************************
HIT THANKS IF THAT WORKS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Rom][Official][MIUI][Developer][MiPad]/Flashing guide via TWRP

Flashing MiPad to MIUI Developer Using TWRP :
1. First of all , its better to back up all data and apps on your MiPad
2. You must install/flash TWRP by juliusssss on your MiPad, if not ? Refer here for instructions and flashing guide of TWRP Recovery.
3. Install UC Browser from here .
4. Download the latest version of MIUI DEVELOPER ROM from MIUI Official ROM for MiPad using UC Browser tabbing on Download Full ROM to be downloaded according to the below photo :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"The download file is MIUI_MOCHA_<ROM VERSION>_<CODE>_<ANDROID VERSION>.ZIP"
5. You need to download Gapps because of Developer ROM has MIUI App Store in Chinese language instead of Google Play Store , that's why you need download it from here for searching/Installing Apps on your MiPad in English ( scroll down, the download button as "Begin Download" is in the down of the page), this ZIP file also needs to be flashed on your MiPad. ( Memorize the directories of downloaded files,/sdcard/UCDownloads)
6. Now , all initial parameters are done , we are ready to flash MIUI DEVELOPER ROM AND GAPPS , First of all , turn off your device
7. Keep pressing and holding VOLUME UP AND POWER BUTTONS together
8. Releasing them until TWRP Recovery appears on the MiPad Screen
9. Tab on the "Wipe"
10. Tab on the "Advanced Wipe"
11. Cross/Mark "Dalvik Cache and Cache ONLY" by tapping on them and "Swipe to Wipe"
Warning : Don't Cross/Mark anything else , it damages or removes your data
12. Tab on the "Back" until to see the next photo and tab on "Install"
13. if the directory of files/folders is "/sdcard" , don't change it ,
If it is in "/" ,scroll down and find/tab on "sdcard"
If it is in "/sdcard/<another folder>" tab on "(Up A Level)" to return to "/sdcard"
14. Now ,you are in "/sdcard" directory , scroll down and find "UCDOWNLOADS" and tab/select it.
15. You must find the MIUI Developer ROM Which in the form MIUI_MOCHA_<ROM VERSION>_<CODE>_<ANDROID VERSION>.ZIP in /sdcard/UCDownloads,tab/select it.
"Notice : /sdcard is sdcard0 or Internal Memory or Phone in-built Memory"
16. MIUI Developer ROM has been selected and added for flashing , now GApps must be added for flashing which was downloaded in stage 5 , for doing that ,tab/select "Add more Zips"
17. Find and tab/select "GApps" which is pa_gapps-modular-pico-4.4.4-20150410-signed.zip .( if you downloaded using UCBrowser, it is in UCdownlods folder itself)
18. Two files were prepared to be flashed , "Swipe to Confirm Flash" to flash... And processing ...
19. You see the Successful on the middle of screen , Tab/Select "Wipe Cache/Dalvik" then "Swipe to Wipe"
20. Tab/Select "Reboot to System" .
21. Finish A white progress bar will be appeared after rebooting ...wait to finish and enjoy MIUI DEVELOPER ROM

Hello sir,,
I am using Alcatel OT idol x+(TCL S960).
Everytime when i flashed the miui rom in my device with TWRP. It installed successfully.
But in file manager its showing 6.09 mb available only and at the same time in setting>storage its showing 4GB available.
Even its. Showing music libraray and gallary empty. I cant even take any image from camera.
I tried all the latest version which was available on their time.
5.5.19 & 5.5.22 & 5.5.29
All the versions hve the same problem.
I tried wipe internal storage also.
But its not worth it.
Sent from my 6043D using XDA Free mobile app

[ROM] KiOS for Karbonn A16 based on iOS

Here i ported one more ROM to Karbonn A16.
This time it is based on iOS.
removed all Stock icons and replaced them with iOS icons.
Boot logo and boot animation changed to iOS
smooth ROM
Pre Rooted but you have to flash latest SuperSU zip through CTR recovery.Download them from here
all Setting Menu everything is copy of iOS
DUAL SIM support
3G
Video call support also
Bugs:
The major bug is related to storage. actually script changed the whole device storage capacity to 90 GB and changed RAM size to 4GB those are showing in setting menu but in actual device storage and RAM sizes are same as product build 4GB ROM and 512MB RAM only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirments:
1. Rooted Device
2. First of all Take backup of your IMEI NVRAM part as this ROM can damage that partition. Use this GUIDE(Click here to seee guide) to take backup of your current IMEI NVRAM.
This is important step otherwise you will lost your one SIM slot.
first of all download mtkdroid tool from here ----> DOWNLOAD
Now Extract this rar file with winrar or any winrar software.
connect your device, make sure you have usb debugging mod on.
now click on root button on MTKdroid tool to get root access, this is not a necessary step, grant the access on mobile.
You will see all details regarding your device.
Now click on IMEI/NVRAM button, you will see following screen
where select backup and backup your IMEI and NVRAM
HOW TO Restore them?
Just connect your Mobile while USB debugging mode on.
now RUN MTKdroid tool.
Now you will see your device details there.
so choose ROOT button and grant root access in your device.
now you will see IMEI/NVRAM button will active.
now choose it and you will below Backup and Restore buttons are active if you already did a backup as above guide.
Now simply choose Restore and first choose bin file and in next dialoge box choose .tar file.
NOW click on Reboot and you are done
3. Download KiOS zip file from here.
(DOWNLOAD KiOS from Here)
4. Install CTR recovery on your Karbonn A16. follow this guide
Make sure you enabled USB debugging mode in your device. To know how to enable it just google it.
Now download CTR recovery installer for windows from here====> DOWNLOAD
now install this software.
now connect your mobile to pc
RUN CTR V2.4
now choose easy installer for mediatek device and auto and follow the instructions\
finally you will reboot into ctr recovery.
Guide to Install KiOS In Karbonn A16
First of all take backup of your current IMEI and NVRAM according above guide
1. Copy Above downloaded KiOS zip file and place it into your internal storage or external storage.
2. Reboot into recovery, use adb commond "adb reboot recovery" or press volume up with power button and choose recovery.
3. now you will boot into CTR recovery.
4. go to Mount section and choose format system.
5. After format choose mount system.
6. now go to wipe menu and do factory reset and wipe delvik cache.
7. now install KiOS_v1.0 Zip file.
8. when done pull out your battery and reinsert battery and restart device.
9. Your device will booted normally but you will not able to see Dual SIM right now so use this Guide to restore your DUAL SIM card setting...

How To Install Custom ROM

Downloading Custom ROM
Step 1 – First, Check Your Model Number Using Going To Setting > About Phone > Model number. The Model Number is The Unique Name or ID of Your Phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2 – After That, You Type The “Custom ROM Name” With Your “Model Number” (Like Show In Image File) in Google and Hit Enter. There Are many Website Who gives You the Custom ROM File. The Custom ROM Files Are Between 1Gb To 1.5Gb Size.
Google Search for Rom
Step 3 – Now You Download The Gapps using The OpenGapps Website.
Installing Custom ROM
So Let’s Get Started.
Step 1 – If you are Newly Android User, and You Don’t Know About How To Unlocking Bootloader Then Follow The step That Is Recommend Unloacking BootLoader.
Step 2 – After That, Copy The Rom File And Gapps File To The Computer. And Also Download The Custom Recovery and Also Copy That file Into Computer.
TWRP Recovery
Step 3 – Now, Shut Down Your Phone and Then Press Vol Down + Power Button For 5 Second. Now You can See The Fastboot Mode is Open In Your Device.
Step 4 – Now Connect Your Android Phone (in Fastboot mode) to Your Computer. On Your Computer, Open Cmd and Write Code
If Your Phone is Visible On the List, Then You are Doing Very Well. If Your Device is Not showing in the List, You Will Comment or Contact Us so I will help You With Your Problem.
Step 5 – To install Custom Recovery, First of all, go to your Folder Where You save The Custom Recovery File and press Shift + Right Click That Will Open The Options Menu (Like Show in Image), click on the Open CMD Here or Open PowerShell Here.
Step 6 – Now Write The Command In CMD
Fastboot flash recovery Your_Recovery_name.img
(Put Your Recovery Name in The Your_Recovery_name.img Area.)
For Example:-
My Custom Recovery Name is recovery.img then I am Writing
fastboot flash recovery recovery.img
fastboot, custom rom
Fastboot command Photo.
Step 7 – Now You Can See your Phone is Rebooting In Recovery Mode.
Step 8 – After Custom Recovery Successfully Installed, You Backup Your Data So if Your System is not Probably installed then You Recover The Data From Backup. So Make Sure You Backup Your all File And System.
Backup Data, custom rom
Backup Data for Future Help.
Note: Backup Your Data Is Very Important.
If The Custom Rom is Not Successfully Install in Your Device. So You Can Use the Backup To Normally Restore The Rom.
Step 9 – Now select the Option wipe and Wipe all the Data. After that Go To your Computer And copy the ROM file and Gapps into the Phone Internal Storage.
wipe data, custom rom
Wipe Your Data.
Don’t choose the Internal storage file If You Have Important Data In Android Phone.
Step 10 – After Copying the Files in Your Phone, Go to install Option And Select The Two File And Install, After installing the File, You see the Reboot option. Select The Reboot Option.
Rom, custom rom
Installing Custom Rom And Gapps
Hurry. You Install the Custom ROM To Your Android Phone.