Hi,
Failed to unlock my bootloader, Motorola says my bootloader can't be unlock.
Need help
3A55000455558775#54413933333039
59434700585431303333000000#1B1A
8A04466076206BE14E1BFD915289B6D
8BDA6#6212B6030F000000000000000
0000000
My phone IMEI-
355004055557857
355004055562857
Can anyoen help me to unlock my bootloader.
Thank you.
Make sure when you paste it in that dialog box on the Motorola Site there is no space in between. When you paste it the space appears so just go manually backspacing all the space boxess. Even I had the same problem last night. So don't panic
If you're on 4.4.4 kitkat and you are sure that you typed the code correctly it's not your fault. The exact same thing happened to me. You just have to flash a temporary bootloader, unlock it, and then reflash original bootloader. I would have given the link (its on the motorola forums) but I cannot as XDA won't allow me to (I have less than 10 posts on the site).
Had this problem before. The thread about this issue is in here:
http://forum.xda-developers.com/moto-g/help/failed-unlocking-bootloader-t2815481
@riteshgpt60 please remove the unlock data and IMEI numbers. These are very sensitive information. Do not make them public in future.
i_rnb said:
@riteshgpt60 please remove the unlock data and IMEI numbers. These are very sensitive information. Do not make them public in future.
Click to expand...
Click to collapse
I always see phrases like this with no explanation about what exactly damage could it make to the owner. Who can explain it to me?
There are a lot of services through the web which can give you some information about your phone based on its imei number. So, according to your words this procedure might be dangerous. And I really hardly believe in it.
And what about unlock data. What could fraud do wih it?
P.s.
Ok, I've made some researches and found out that phone could be wired based on imei.
@ all
Hi, I just wanted to upgrade my moto G to lollipop , so i flashed the brasil fw, after flashing the firmware , my phone can't boot , it stuck on fastboot mode with a warning showing " version downgrade for boot, failed to validate boot image"
I read somewhere that it can be solve by unlocking the bootloader and flash.
I paste the unlock code correctly but it can't unlock my bootloader.
Need help!
@[email protected]$h98 ,
Thank you for helping me, after unlocking BL , the update and flashing process goes fine.
Here's the prove, My moto G running 5.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected]$h98 said:
If you're on 4.4.4 kitkat and you are sure that you typed the code correctly it's not your fault. The exact same thing happened to me. You just have to flash a temporary bootloader, unlock it, and then reflash original bootloader. I would have given the link (its on the motorola forums) but I cannot as XDA won't allow me to (I have less than 10 posts on the site).
Click to expand...
Click to collapse
Please tell me the steps....
prajwaldr9 said:
Please tell me the steps....
Click to expand...
Click to collapse
Check my post on this thread:
http://forum.xda-developers.com/mot...bootloader-t2815481/post58031385#post58031385
The steps are listed in the READMEFIRST file.
Related
I have a Moto G mobile, my friend took it for some days and he locked the device by pattern which was forgotten. Then I reset the device from boot. Now the device is asking me for the google account to login which was signed in before reset, but I have forgotten the password of the account and did not set any recovery email and phone number during creating the google acc. that can help me to recover the password. Now I m in tention. Please Help me to solve the problem I m facing. srry4my bad eng..
Regards- Noorjamal
Unless your Bootloader is unlocked, or Settings > Developer options > Enable OEM unlock is ticked - there is no solution.
Can I unlock bootloader?
Thank you very much for making a reply. Now please tell me
Is there any way to unlock bootloader in this device?
noorjamal said:
Thank you very much for making a reply. Now please tell me
Is there any way to unlock bootloader in this device?
Click to expand...
Click to collapse
Was the settings option I mentioned enabled or not?
lost101 said:
Was the settings option I mentioned enabled or not?
Click to expand...
Click to collapse
How can I check if that option is enabled or not as I can't access menu.
noorjamal said:
How can I check if that option is enabled or not as I can't access menu.
Click to expand...
Click to collapse
You can't. And if the option has not been enabled, you cannot unlock the Bootloader. You can still try the following:
Bootloader Unlocking Tutorial: http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
Thanks
lost101 said:
You can't. And if the option has not been enabled, you cannot unlock the Bootloader. You can still try the following:
Bootloader Unlocking Tutorial: http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
Click to expand...
Click to collapse
I m going to try, After unlocking bootloader what I need to do ?
lost101 said:
You can't. And if the option has not been enabled, you cannot unlock the Bootloader. You can still try the following:
Bootloader Unlocking Tutorial: http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
Click to expand...
Click to collapse
Kindly can you tell me the name of the software by seeing the below screenshot?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
noorjamal said:
Kindly can you tell me the name of the software by seeing the below screenshot?
Click to expand...
Click to collapse
Google image search.
Hey guys. So I bought an LG v50 the other day on ebay from a seller in Spain. Its a v500n model with LG Uplus firmware. When I initially turned it on I got the bootloader is unlocked warning. The bootloader is indeed unlocked so I've been trying all day to relock it. The problem started when I couldn't even get it into fastboot mode so I used a guide on one of these other posts about using LG UP to flash boot a partition and boot b partition to force it into the bootloader menu. I did that and successfully gained access to it. When I tried Fastboot flashing lock command and its variants I was just getting Failed messages all the time. I included a screenshot of what I was getting. Looks like the lock count is set to 0. I tried reflashing the firmware but still nothing. Anyone help me out? I'm in Ireland and don't fancy sending this phone all the way back to Spain. Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Jacksie66 said:
Hey guys. So I bought an LG v50 the other day on ebay from a seller in Spain. Its a v500n model with LG Uplus firmware. When I initially turned it on I got the bootloader is unlocked warning. The bootloader is indeed unlocked so I've been trying all day to relock it. The problem started when I couldn't even get it into fastboot mode so I used a guide on one of these other posts about using LG UP to flash boot a partition and boot b partition to force it into the bootloader menu. I did that and successfully gained access to it. When I tried Fastboot flashing lock command and its variants I was just getting Failed messages all the time. I included a screenshot of what I was getting. Looks like the lock count is set to 0. I tried reflashing the firmware but still nothing. Anyone help me out? I'm in Ireland and don't fancy sending this phone all the way back to Spain. Thanks in advance.
Click to expand...
Click to collapse
You can go flash Android pie, flash the engineering abl using edl, and then lock it
antintin said:
You can go flash Android pie, flash the engineering abl using edl, and then lock it
Click to expand...
Click to collapse
Cheers for the reply. Would you have a quick guide to do that? I've never really messed around with lgs before so this is kind of new to me. Thanks again.
Hi,
I would like to root my Nokia 1.3 (Android Go Edition) phone TA-1207. Can someone please recommend a simple and reliable way to do this (one that has worked for them)? The first step is to unlock the bootloader, but I have not found any resource on unlocking Nokia 1.3 bootloader. Please help.
Thanks!
Me too!!!
vv_777 said:
Hi,
I would like to root my Nokia 1.3 (Android Go Edition) phone TA-1207. Can someone please recommend a simple and reliable way to do this (one that has worked for them)? The first step is to unlock the bootloader, but I have not found any resource on unlocking Nokia 1.3 bootloader. Please help.
Thanks!
Click to expand...
Click to collapse
As 1st thing of all things check wheteher phone's bootloader is unlockable or not:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do not try root nokia 1.3 if there arent many totorials because you can fast corrupt it and cant reflash it if you have wrong firmware i need a firmware to restore so yea
Greetings | [inf]KRATOS#7207 Discord!!!
vv_777 said:
Hi,
I would like to root my Nokia 1.3 (Android Go Edition) phone TA-1207. Can someone please recommend a simple and reliable way to do this (one that has worked for them)? The first step is to unlock the bootloader, but I have not found any resource on unlocking Nokia 1.3 bootloader. Please help.
Thanks!
Click to expand...
Click to collapse
To unlock boot loader on TA-1207 just unlock developer options. Then toggle OEM unlocking. Boot into fastboot and use 'fastboot oem unlock'.......worked for me
Anybody find any firmware yet? I found some, but its all too old to put on the 1.3 now. The latest OTA I have been able to find is from 06/2020. Hoping some newer versions start to pop up. Or the OTA from 10 to 11
e.giltmier said:
To unlock boot loader on TA-1207 just unlock developer options. Then toggle OEM unlocking. Boot into fastboot and use 'fastboot oem unlock'.......worked for me
Click to expand...
Click to collapse
When I try fastboot oem unlock, it throws up the 'Command not supported in default implementation' error.
Try 'fastboot flashing unlock' it worked 4 me but I broke the damn thing by flashing a fake boot image.
Hi,
I want to unlock my bootloader to install the Indonesian Rom,
when I unlock I get this message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I relock after flashing the new Rom will the phone be protected again ?
also, has any one else have problems with dark mode ?
Thank you in advance,
Itai.
itais said:
Hi,
I want to unlock my bootloader to install the Indonesian Rom,
when I unlock I get this message
View attachment 5315651
Click to expand...
Click to collapse
Those tips are just a confirmation. If you are worried about what it's telling you, then don't unlock bootloader.
itais said:
If I relock after flashing the new Rom will the phone be protected again ?
Click to expand...
Click to collapse
Only if you flash your own region stock back. Eg. your device is Indian, then you have to flash back to Indian Rom, then you can relock.
If you relock when having different region Rom, there might cause some problem or even brick your phone.
If you are going to use other region Rom, then do not relock the boot loader.
itais said:
also, has any one else have problems with dark mode ?
Click to expand...
Click to collapse
What problem specific?
pl1992aw said:
Those tips are just a confirmation. If you are worried about what it's telling you, then don't unlock bootloader.
Only if you flash your own region stock back. Eg. your device is Indian, then you have to flash back to Indian Rom, then you can relock.
If you relock when having different region Rom, there might cause some problem or even brick your phone.
If you are going to use other region Rom, then do not relock the boot loader.
Click to expand...
Click to collapse
Ok Thanks
pl1992aw said:
What problem specific?
Click to expand...
Click to collapse
Some apps don't work , and for some i found that i can disable dark mode and then they work and there text is visible
Anybody please feel free to correct if I'm wrong, but I think what "may damage your device or cause financial loss" is exactly that custom ROM you're flashing, nothing else.
disacrol said:
Anybody please feel free to correct if I'm wrong, but I think what "may damage your device or cause financial loss" is exactly that custom ROM you're flashing, nothing else.
Click to expand...
Click to collapse
Finger print is not as secure as device with locked bootloader. This is an example of financial loss, eg. loosing the device stolen by strangers. This is what the "find my device" option Google offers for.
Even if you have official MIUI with unlock bootloader, if people steal your device, they can take your personal data with TWRP if they crack the password and finger print.
pl1992aw said:
What problem specific?
Click to expand...
Click to collapse
^ hijacking this.
*** SPOILER: I've found an answer, it's below ***
This is how sorting menu looks like in Youtube Manager Studio for example. Guess it's app-specific but I've encountered couple of them not very happy about dark mode.
(I'm on Xiaomi.eu roms but stock was the same)
Any chance I could tweak it a little somewhere?
EDIT: Found solution! Just enter Settings > Display > More Dark mode options and then just disable dark mode for problematic apps. Ofc it doesn't fix dark mode for them, just removes dark mode from those specific apps, but for me it's okay as a workaround
Hello, I have NO OEM unlocking option in developer settings? Australia is the Country. Could anyone tell me if this is normal with all CAT phones in Aus.
I got My s62 pro couple weeks back. The phone at times gets hot when in use and my voice sounded like i was talking under water , so the person at the other end explained. Generally the audio sounds a bit high pitched, it is a quirky phone. Could it be possible that spyware was installed whilst in transit, and the ability to access OEM unlocking was hidden so not to flash to another rom, just a possibility i was considering.
Any help would be appreciated . Thanks
if your firmware is :
Cat/S62Pro/S62Pro:11/RKQ1.210406.002/1.014.01
boot and recovery are here :
cat s62pro boot recovery.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
drive.google.com
chazzle001 said:
Hello, I have NO OEM unlocking option in developer settings? Australia is the Country. Could anyone tell me if this is normal with all CAT phones in Aus.
I got My s62 pro couple weeks back. The phone at times gets hot when in use and my voice sounded like i was talking under water , so the person at the other end explained. Generally the audio sounds a bit high pitched, it is a quirky phone. Could it be possible that spyware was installed whilst in transit, and the ability to access OEM unlocking was hidden so not to flash to another rom, just a possibility i was considering.
Any help would be appreciated . Thanks
Click to expand...
Click to collapse
If you have the "Allow OEM unlock" toggle in developer options, switch it on, then
adb reboot fastboot
Click to expand...
Click to collapse
Bootloader unlock is achieved with
fastboot flashing unlock
fastboot flashing unlock_critical
Click to expand...
Click to collapse
Follow instructions on the phone to unlock bootloader.... After reboot, and every time the device boots (until you run the bootloader lock command) you will get a warning that the bootloader is unlocked and data on the device can't be verified, at power on, before boot logo...
This is where I'm stuck... I have the latest firmware on S62(not Pro) and I can't find a means to get boot.img to patch and flash. There isn't a loader for edl, fastboot is only for writing to, not read back of partitions, and I can't find the OTA update .zip with a payload.bin to extract the boot.img from... If anyone can help it would be greatly appreciated