[Q] I need some serious help! - ONE Q&A, Help & Troubleshooting

Okay so I tried to root my one plus one in somehow something went wrong it now says I have no OS and I tried using ABD to flash a new ROM. But it said the phone is not unlocked and when I try to unlock using the toolkit it doesn't work because the phone just gets stuck at boot screen. I do have twrp and I have a little usb stick one side is normal USB and the other is micro so it fits in my phone but the one plus does not recognize it when I connect it. Anyone have any suggestions?

Flash the BootUnlocker script in this thread via TWRP recovery.
Be sure to read the OP in full before proceeding.

Click on this user named @timmaaa in his sig there is a thread that gives you full instructions. Delete that garbage toolkit. Start from beginning and read everything first before acting on it
Sent From Lollipopified Bacon Goodness!

Related

Having trouble unlocking with 1.85, not sure where I'm going wrong

Just picked up a 1 week old used AT&T One X. Previous owner had rooted, and the phone indeed shows "Tampered" and "Locked" when you boot into bootloader. I confirmed root by using Titanium Backup, and in there it showed "root access: OK (BusyBox 1.18-4-Titanium from app)", so I assume I'm all good there.
So I moved onto the unlock tutorial. The one found here: http://forum.xda-developers.com/showthread.php?t=1672284 I did the following:
1. Downloaded the Spoof-CID file. Unzipped and did not find the file referenced in the tutorial, which is "unlock-bootloader.bat", but assumed that must reference an older zip, and assumed the new file to use is "Spoof-CID.bat"
2. Updated the HTC drivers for the phone so it shows as "My HTC" under Android USB Devices in the device manager when plugged in and in USB debugging mode
3. Ensured USB debugging mode and Charge Only mode on phone are enabled
4. I opened task manager and shut down ADB and HTC manager if I found them running
4. Ran "Spoof-CID.bat" as admin (Win 7 pro x64) and got the red CMD prompt screen open and accepted the first two warnings.
5. This is where it failed - it gave me the following message
"Restarting ADB
Pulling Files
Checking Files
Couldn't pull files from device. Your device was not altered.
Press any key to continue..."
I've tried this on my laptop as well (also running Win 7 pro x64), and still no joy - exactly the same problem.
I did a factory reset, reinstalled superuser and SuperSU, and tried this again from scratch, and still it gave me the same error. I found one other thread that mentioned this same problem after searching, but there was no resolution given.
I'm kind of at my wits end here. I find the stock rom slow, buggy, incredibly bloated, and locked down after recently switching from a Galaxy Nexus with custom Jelly Bean rom on it. If I can't somehow unlock this thing and start putting custom roms on it, I think I might have to put it up for sale.
Any suggestions?
Did you turn fast boot off in power options?
_MetalHead_ said:
Did you turn fast boot off in power options?
Click to expand...
Click to collapse
Ah, yes, forgot to mention that too. Yes, I had it turned off. Still nothing
Taking a shot in the dark here because it's been forever since I unlocked, but try updating the SU binary in the SuperSu app.
edit: You only need SuperSU, delete SuperUser. Not sure but that could cause issues. Not necessarily with this but with other things.
Another suggestion would be to try the manual method so you can see step by step what's going on.
http://forum.xda-developers.com/showthread.php?t=1671396
Sent from my HTC One XL using Forum Runner
If your trying to do it with spoof partitions you can use the manual method also.
http://forum.xda-developers.com/showthread.php?t=1732980&page=1
Sent from my SPH-L710 using xda premium
_MetalHead_ said:
Taking a shot in the dark here because it's been forever since I unlocked, but try updating the SU binary in the SuperSu app.
edit: You only need SuperSU, delete SuperUser. Not sure but that could cause issues. Not necessarily with this but with other things.
Click to expand...
Click to collapse
I read that I should do that in another thread, but I couldn't figure out how to do it. Is that in the settings screen?
E.Cadro said:
Another suggestion would be to try the manual method so you can see step by step what's going on.
http://forum.xda-developers.com/showthread.php?t=1671396
Sent from my HTC One XL using Forum Runner
Click to expand...
Click to collapse
Thanks to all you guys for the tips. Maybe if I really can't find the solution I'll give one of these manual methods a try, though they look a little daunting and I'd be concerned about getting stuck with an unusable phone.
Is there a good reason to go with one over the other? I don't know what spoofing the partition is.
I followed your advice and tried the manual method. Turns out the problem was that the CID has already been changed to 11111111 or whatever. Makes me wonder if the previous owner did this or could it have possibly come that way from AT&T?
Either way, successfully got through the rest of the steps on HTCDev, and I'm good to go! Thanks again for the help!
Lol well that explains it. Glad it all worked out for you
Sent from my HTC One XL using Forum Runner

[Q] Bricked HOX? Please help.

I have an ATT One X, which I recently rooted. Yesterday I tried to flash a JB ROM and it said it was successful. However, now when I turn it on it just stays on the Quietly Brilliant screen indefinitely.
I can get into fastboot, and TWRP is there too.
I can't mount from within TWRP, as my computer just says the drive must be formatted before it can be used. I tried to run an RUU but it doesn't recognize that the phone is connected. Anytime I go to reboot, etc from within TWRP it tells me I have no OS.
Help? Please?
Reference the other 20,000 threads opened and answered about this topic
emylibef said:
I have an ATT One X, which I recently rooted. Yesterday I tried to flash a JB ROM and it said it was successful. However, now when I turn it on it just stays on the Quietly Brilliant screen indefinitely.
I can get into fastboot, and TWRP is there too.
I can't mount from within TWRP, as my computer just says the drive must be formatted before it can be used. I tried to run an RUU but it doesn't recognize that the phone is connected. Anytime I go to reboot, etc from within TWRP it tells me I have no OS.
Help? Please?
Click to expand...
Click to collapse
If it tells you in needs to be formatted... FORMAT IT!! Mount in twrp and right click removable storage. Choose format. Look down about 2 threads.. I literally just explained the process to another guy. Gotta read bro.
Sent from my HTC One XL using Tapatalk 2
I think these people need some tough love so they do some research and learning
Sent from my HTC One XL
Ya, I just stopped replying to these threads
My new years resolution didn't last long I passed on a few but OMFG how can so many people be so lazy and not see all the answers
Sent from my HTC One XL
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
Maybe next year I'll be a more patient person
2013 is not the year for me sorry noobs at least titan will be ready to hold your hand.
Titan you are my idol
Sent from my HTC One XL
emylibef said:
I have an ATT One X, which I recently rooted. Yesterday I tried to flash a JB ROM and it said it was successful. However, now when I turn it on it just stays on the Quietly Brilliant screen indefinitely.
I can get into fastboot, and TWRP is there too.
I can't mount from within TWRP, as my computer just says the drive must be formatted before it can be used. I tried to run an RUU but it doesn't recognize that the phone is connected. Anytime I go to reboot, etc from within TWRP it tells me I have no OS.
Help? Please?
Click to expand...
Click to collapse
If you have no OS, download cleanrom 5.1, and trasnfer it to your phone. Flash that in twrp and you'll have your phone back... If you want to venture further, pm me and ill help you through it
Sent from my HTC One XL using Tapatalk 2
Do not worry, ur phone not brick, just you did not flash kernel before flash rom. Always remember this, if you are on Hboot 1.14 or higher, flash kernel (boot.img) before flash rom. Now just extract the boot.img from the JB rom, hook phone to PC (make sure fastboot USB), using kernel flasher, and flash the kernel. Then bingo, your phone back to life!
*** Remember this, always nandroid backup, and as long as you can get into recovery mode, it means ur phone never been bricked!

[Q] screwed something while installing cromi4.0 need some direction

ok so i installed the asus 4.2 no problem. bootloader is unlocked. i then flashed twrp 4.2, then realized i needed to do push 4.4 twrp instead. so i did that. i was able to boot to the asus rom no problem. i then rebooted into twrp, and it starts asking me for a password, all i could do was hit cancel. Nothing will mount, no sdcards no external, no internal memory. so i did a bit of reading and someone said a factory reset from the bootloader screen would fix twrp. that was a big nope.
so, now the tablet will only boot into twrp, but not read anything, and i cant even get to the fastboot menu so that i can push anything. when i reset it says install super user??/ but it also says no os installed. i have a rom on my sd card i could load if i can get twrp to read it, but i tried mounting, and unmounting, and pretty much every option in every menu.
anyone have any insite?
Thank you
Mike
Who would have thought. I registered because of this exact issue. Actually, bought the Pad today and wanted to install this ROM which ended with a device that's stuck in recovery.
In my case I first unlocked, updated to the newest stock OS then installed TWRP "openrecovery-twrp-2.4.4.0-tf300t-JB.blob". After that it's the same as the OP.
I'm a noob, but I could install ADB drivers and then push files into the device with it ( including stock ROM ). Unfortunately, trying to install it ended with failure. Every time you reboot all the pushed files disappear, too.
Other than in ADB, the tablet is invisible to Windows ( says no drivers ).
After some research it's become rather obvious that our devices are bricked. So far it seems like the only way to fix this is to send our Pads back to Asus. The bad news is that they are likely to offer motherboard replacement which is close to the value of a new Transformer.
Myself I'll be emailing them tomorrow.
bythewayr said:
Who would have thought. I registered because of this exact issue. Actually, bought the Pad today and wanted to install this ROM which ended with a device that's stuck in recovery.
In my case I first unlocked, updated to the newest stock OS then installed TWRP "openrecovery-twrp-2.4.4.0-tf300t-JB.blob". After that it's the same as the OP.
I'm a noob, but I could install ADB drivers and then push files into the device with it ( including stock ROM ). Unfortunately, trying to install it ended with failure. Every time you reboot all the pushed files disappear, too.
Other than in ADB, the tablet is invisible to Windows ( says no drivers ).
After some research it's become rather obvious that our devices are bricked. So far it seems like the only way to fix this is to send our Pads back to Asus. The bad news is that they are likely to offer motherboard replacement which is close to the value of a new Transformer.
Myself I'll be emailing them tomorrow.
Click to expand...
Click to collapse
Did you use twrp from their site.or the modded one here on the forums
Sent from magical jelly bean.
Yeah. I had the modded one from the thread on the tab. But when i hooked it up to the computer and had everything in fast boot. I hadnt copied it over so i grabbed one from their site. I knew i screwed up something
Sent from my Galaxy Nexus using xda app-developers app
klownin5643 said:
Yeah. I had the modded one from the thread on the tab. But when i hooked it up to the computer and had everything in fast boot. I hadnt copied it over so i grabbed one from their site. I knew i screwed up something
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
That's your issue.you need the modded one
Sent from magical jelly bean.
kaos420 said:
That's your issue.you need the modded one
Sent from magical jelly bean.
Click to expand...
Click to collapse
Yeah, the only problem being that we can no longer flash anything. There's still no solution, right?
bythewayr said:
Yeah, the only problem being that we can no longer flash anything. There's still no solution, right?
Click to expand...
Click to collapse
Not sure why I stayed on 4.1 boot loader with 4.2.2 cm10.1 just not worth it to me until a o.c kernel appears
Sent from magical jelly bean.
bythewayr said:
Yeah, the only problem being that we can no longer flash anything. There's still no solution, right?
Click to expand...
Click to collapse
You might want to dig through the forums. I believe I did read about a trick using the little reset hole (About an inch below the microSD).
From there it might be possible to flash the modded TWRP. From there you should be able to get back into your JB.
I'd be very careful with flashing ROMs, I still don't see anything that confirms we can use one safely on our newest model/version.
I would be totally fine. Just installing stock Asus jellybean for now. Just so I works. I found the thread on the reset hole. I'm going to try it this afternoon.
Sent from my Galaxy Nexus using xda app-developers app
As long as fastboot still works you're not bricked. If you can't boot to download mode try adb in recovery mode and send
Adb reboot download
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
I don't know if fast boot still works. When I boot up it boots directly to twrp I don't have the option to enter recovery. It flops directly into recovery. I'm gonna try and play with this so called reset button and see if that gets me anywhere. If I can get to fast boot from there I might be OK.
Sent from my Galaxy Nexus using xda app-developers app
klownin5643 said:
I don't know if fast boot still works. When I boot up it boots directly to twrp I don't have the option to enter recovery. It flops directly into recovery. I'm gonna try and play with this so called reset button and see if that gets me anywhere. If I can get to fast boot from there I might be OK.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Check if ADB still works, it should since you have TRWP!
and try:
adb reboot bootloader
klownin5643 said:
I don't know if fast boot still works. When I boot up it boots directly to twrp I don't have the option to enter recovery. It flops directly into recovery. I'm gonna try and play with this so called reset button and see if that gets me anywhere. If I can get to fast boot from there I might be OK.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
That's why I said to execute adb from recovery.
Code:
adb reboot download
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
ok so the adb reboot bootloader worked. and i was finally able to reboot into the os. turns out it was still on there even though twrp said it was not. so now, i suppose im going to reboot into fastboot, and push the new modded twrp from fastboot. and we should be good? Im going to try it. ill report back. now that i know my adb works correctly, im not so scared of getting stuck. back in a few. thank you guys for the help. and direction. i only hope this helps someone else not get as stuck as i was.
edit:
yeah so that is no good. downloaded the modded one from the thread. though it appears that its the same as the one from twrp site. except the link in the cromi 4.0 first post points to an androidfiledownload site. i pushed it via fastboot. except when executing the reboot command, it simply booted back to the twrp screen with it still asking for a password. so now i guess im looking at reflashing the asus stock rom and letting rewrite the recovery? and starting fresh? can i do that via adb? im still learning adb and fastboot stuff. Thanks.
Can't check this adb command solution till next Thursday but I sure hope it'll work for me, too.
As far as I understand this whole TWRP problem is that it doesn't have permission to do anything which thankfully should keep the original OS safe.
Keep us posted klownin5643. At this point I'm also mostly concerned with getting back the original recovery program.
Same issue here! Happened to me a few weeks back:
http://forum.xda-developers.com/showthread.php?t=2197895
Only when mine booted directly into TWRP connecting it to the PC didnt yeaild me any results, even after I was able to get the PC to install the naked drivers. The PC would error and say, unable to start device so ADB would not work for me either and trying 'adb devices' didnt return any results. The ONLY thing that worked for me was booting into ADX but that did me no good as I had not installed NVFLASH prior to the brick.
The resolution for me was to replace the mainboard. I got it off of eBay for 88 dollars shipped. I replaced it the same day it came in and Im up and running on the new stock 4.2.1 ASUS release. Paying the 88 dollars was better than shopping for a new tablet
Good luck with your troubleshooting OP! :good:
I'm wondering at this point, can I even flash a new recovery? Or even reflash a new ROM thru fast boot? Someone else said they tried thru adb but the files just disappeared. Or was that cause he was just pushing it to the memory card? I had the os running but I got a freeze and reboot. And it went right back to the direct loading of twrp. I don't wanna have to do that every time I restart. What would be the ASB command or fast boot to flash a new rom.?
Sent from my Galaxy Nexus using xda app-developers app
I know I'm not the only one with this problem. But has anyone flashed the stock blob over top and got everything back to normal?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Refering to your question about pushing files with ADB. I pushed them to internal memory, but that was in recovery mode with locked twrp. If you can get out of recovery with "adb reboot bootloader" then it wouldn't be directly applicable.
If you really have functional fastboot commands ( i.e. commands working instead of "waiting for device" ) then flashing a new ROM or recovery should be, more or less, straightforward. One thing I'm not sure about myself is whether new recovery can be named whatever or should it be called "twrp.blob" again. Technically, yoou're giving a "flash recovery" command so it should replace the current one, whatever it is but I'd rather not brick my device for good with a bad flash. Either way, like I mentioned, I have to wait till thursday to try anything.
I have to read more about fastboot to help with the right commands but there's a lot of guides out there.
I can give the flash recovery command and it will be fine. When I give the reboot command it freezes.
Sent from my Galaxy Nexus using xda app-developers app

[Q] Help, may have bricked

A little foreshadow. I attempted to install the jellybean update on a rooted ATT phone. I ended up getting sent to the TWRT (?) screen on the install. I was silly and decided to clear the system... Which erased my OS completely.
For a while I was able to get to the TWRT(?) screen where I could mount my sd card, etc. While researching the problem I came across this:
a solution of fastbooting a recovery.img
I ran the fastboot recovery.img. The only problem is the only screen I can now access is the bootloader. I have bootloader 1.14.0002 loaded onto my phone if that helps.
Is there anyway to try to get a operating system or flash a rom onto this phone still or is it bricked for good? Also if I was able to put a rom onto it, what do you sugggest?
When I try to go to Recovery or Factory Reset, I get the HTC screen with the red text underneath it and it never goes any further.
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
That is the information listed in my bootloader as of now. I am not showing it listed as a drive in my computer when connected to USB. Also when I 'power off' I am in a reset cycle that doesn't stop.
I really appreciate any help in advance. This was a big wake up call to myself about how I should be a lot more careful when messing with these things.
Thank you to everyone that answers!
http://forum.xda-developers.com/showthread.php?p=38909732
[Public Service Announcement] Read before installing the AT&T Jellybean OTA or RUU
You might be hosed. Can you get into bootloader?
Sent from my One X using xda premium
Read before doing anything. Such a simple task. It's easy to read, it's hard to come back from a brick.
Sent from my One XL using XDA Premium
You are not bricked, you are not even close to bricked... If you are already rooted, get the official jellybean update of your head. Clear your thoughts and lock it away. There are tons of custom jellybean ROMs available, a couple based on atts JB update... Flash one of those. If you can get to bootloader you're fine. If you can still access twrp, even better... Which version of twrp do you have IF you can still access? We'll start with that. If not You'll have to fastboot a recovery. 2.3.3.0 is your safest bet, I think the community will agree this is one of the most stable versions for our device.. Just in case you have to push it, download from here onto your computer. http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.0-evita.img
Now drop that image file into your adb/fastboot folder. Right click your adb/fastboot folder and open a command prompt from there. Shoot this command.
Fastboot flash recovery openrecovery-twrp-2.3.3.0-evita.img
Now from bootloader choose to boot into recovery. Awwww yea now we on to something!
Now you can download the rom of choice onto your computer. Since you opted for official JB, take a look at Scotts CleanRom. It uses ATT firmware as base :thumbup: once downloaded, double click the zip file (rom) it'll show contents, and youll see a boot.img. simply drop the boot.img into your fastboot/adb folder.
Now on your phone. Choose "mount" in recovery. Make sure it mounts and shows files on your computer. From here drag the entire rom zip (cleanrom) onto your SD card. Now "unmount" hell yea we getting close. I can feel it!
Back out and choose "install" find cleanrom.zip, and swipe to flash. F*ckin rite, this is what android is all about.
Once its completed, DO NOT REBOOT SYSTEM. Since your s-on and have 1.14 hboot, you'll have to fastboot the boot.img you put in your adb folder. Choose to boot into bootloader! Make sure once again it says fastboot usb
Fire up command prompt inside that folder.
Shoot the command ---> fastboot flash boot boot.img
Sending.......
Okay....
Finished.....
OMG success!!! Some people will say to ---> fastboot erase cache
I don't necessarily do this, but it definitely won't hurt. Now reboot system and enjoy Scotts hard work. They don't calls his ROMs the most stable ROMs on the planet for nothing
Sent from my One X using Tapatalk 2
Not only does fastboot erase cache not take long it avoids many stupid little issues. I would say it's a must when flashing a new recovery.
Sent from my One X using xda app-developers app
sinkthehalffoot said:
I attempted to install the jellybean update on a rooted ATT phone. I ended up getting sent to the TWRT (?) screen on the install.
Click to expand...
Click to collapse
The reason it went to recovery is very simple. The OTA needs to have stock recovery in order to install. You don't have stock recovery on your phone anymore, you have custom recovery (TWRP). So the OTA stalled there, when it didn't find stock recovery.
sinkthehalffoot said:
I was silly and decided to clear the system... Which erased my OS completely.
Click to expand...
Click to collapse
Of course it did, what were you expecting to happen? Wiping the OS is the very definition of what happens when you wipe system. If you didn't know what wiping system would do, you shouldn't have done it. For that matter, you shouldn't be doing anything on your phone if you don't know what its for.
A lot of this points to a fundamental lack of reading and understanding:
- Don't know the name of the custom recovery installed on the system
- Wiping things without knowing what they are
- Basic rule (that many folks here seem to ignore, for reasons unknown): Don't install any OTA on a rooted device without first researching what will happen
Lack of basic understanding which spells almost certain doom when modding smartphones. I would highly suggest a few solid hours of research before messing with your phone anymore. I'm not saying this to be a jerk. I'm saying it so you don't brick your phone.
You aren't bricked. With very few exceptions (and this isn't one of those) if the screen turns on, and you can get into hboot, the phone is recoverable. And probably fairly easily so, with the right steps. But you need to do some homework before proceeding.
redpoint73 said:
Lack of basic understanding which spells almost certain doom when modding smartphones. I would highly suggest a few solid hours of research before messing with your phone anymore. I'm not saying this to be a jerk. I'm saying it so you don't brick your phone.
Click to expand...
Click to collapse
+1000
This is exactly the kind of situation that occurs when people get in over their heads and start blundering around.
http://forum.xda-developers.com/showthread.php?t=2232141
InflatedTitan said:
You are not bricked, you are not even close to bricked... If you are already rooted, get the official jellybean update of your head. Clear your thoughts and lock it away. There are tons of custom jellybean ROMs available, a couple based on atts JB update... Flash one of those. If you can get to bootloader you're fine. If you can still access twrp, even better... Which version of twrp do you have IF you can still access? We'll start with that. If not You'll have to fastboot a recovery. 2.3.3.0 is your safest bet, I think the community will agree this is one of the most stable versions for our device.. Just in case you have to push it, download from here onto your computer.
Now drop that image file into your adb/fastboot folder. Right click your adb/fastboot folder and open a command prompt from there. Shoot this command.
Fastboot flash recovery openrecovery-twrp-2.3.3.0-evita.img
Now from bootloader choose to boot into recovery. Awwww yea now we on to something!
Now you can download the rom of choice onto your computer. Since you opted for official JB, take a look at Scotts CleanRom. It uses ATT firmware as base :thumbup: once downloaded, double click the zip file (rom) it'll show contents, and youll see a boot.img. simply drop the boot.img into your fastboot/adb folder.
Now on your phone. Choose "mount" in recovery. Make sure it mounts and shows files on your computer. From here drag the entire rom zip (cleanrom) onto your SD card. Now "unmount" hell yea we getting close. I can feel it!
Back out and choose "install" find cleanrom.zip, and swipe to flash. F*ckin rite, this is what android is all about.
Once its completed, DO NOT REBOOT SYSTEM. Since your s-on and have 1.14 hboot, you'll have to fastboot the boot.img you put in your adb folder. Choose to boot into bootloader! Make sure once again it says fastboot usb
Fire up command prompt inside that folder.
Shoot the command ---> fastboot flash boot boot.img
Sending.......
Okay....
Finished.....
OMG success!!! Some people will say to ---> fastboot erase cache
I don't necessarily do this, but it definitely won't hurt. Now reboot system and enjoy Scotts hard work. They don't calls his ROMs the most stable ROMs on the planet for nothing
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
In case anyone ends up stumbling here with a similar issue, this solution worked to a 'T'. Thank you again InflatedTitan.
To everyone else, yes I know, I should of read more than I had. I saw the jellybean update and have been wanting it for a while and acted with haste. I learned a valuable lesson from it all.
Lol this "solution" was around before you posted. You just didn't read or search enough.
Sent from my One X using xda app-developers app
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Venomtester said:
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Lol :beer:
Sent from my HTC One X using xda app-developers app
Venomtester said:
F**kin right! That's what android is all about. Hahaha!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Its almost like a high every time I slide to flash lol
Sent from my HTC One XL using Tapatalk 2
InflatedTitan said:
Its almost like a high every time I slide to flash lol
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I thought I was the only one. In fact I just rooted a nook tablet and installed twrp. Slides to flash... And I could swear I was on cloud 9.
But bravo on the explanation sir. Love a good write up. Even though i already know it, feels good to read it.
Sent from my Carbon-ize Evita using xda-developers app
[HELP] Not sure if bricked or hardware issue?
I know this is my first post, but I really need the help.
(Also, I'm sorry if this is a bit long)
I've have searched the HOX Evita and Android Q&A forums countless time in the past 3 days trying to figure this out. This thread and this one: "http://forum.xda-developers.com/showthread.php?t=2156665&highlight=fastboot+usb+hangs", are the most similar to what I think is happening to my phone.
Just a little background:
- Bought a used HTC One X, but has a cracked digitizer which I'll be replacing this weekend. (Not sure if this is causing the problems, could it?)
- I was told that the OS was still stock, but I know that's not true now.
- During the first 12 hours I used it, I had no problems.
- Then while I was playing music it rebooted and went to the HTC boot up screen with the red text. Stopped then rebooted again to the normal HTC boot up screen but just hanged there and vibrated nonstop.
- I then used the power button to force a shut down and haven't been able to use it since then.
Here's where I'm at now:
- I'm able to get to the bootloader screen sometimes with the VOL DOWN+PWR method, but most of the time it goes to the QHSUSB mode.
- When I can get to the bootloader, I try to get to Fastboot or Recovery mode but once I press the power button it just stops and does nothing.
- The few times I have gotten into fastboot, and plug in an USB cable, it hangs.
- So far I have NOT gotten it to show "FASTBOOT USB" therefore I haven't been able to use a RUU or flash a boot.img.
- I have reinstalled the drivers almost 5 times now, and tried with different sources from here and HTC Sync. And also tried with 3 different cables and USB ports on my laptop. But still no signs of a connection with my laptop.
- And at one time I (before I knew I shouldn't have) I did try to Factory Reset from the bootloader, but nothing happened. I hope that won't become my downfall.
But yeah, sorry again for the long post, just trying to be thorough. If anyone has an idea of what I can do, please I need your help. It really doesn't matter to me whether my HOX goes back to stock, or use a ROM like CleanROM 6, as long as I can use it again.
Also here's the info at the bootloader screen.
***TAMPERED***
***LOCKED***
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
pharrjw said:
I know this is my first post, but I really need the help.
(Also, I'm sorry if this is a bit long)
I've have searched the HOX Evita and Android Q&A forums countless time in the past 3 days trying to figure this out. This thread and this one: "http://forum.xda-developers.com/showthread.php?t=2156665&highlight=fastboot+usb+hangs", are the most similar to what I think is happening to my phone.
Just a little background:
- Bought a used HTC One X, but has a cracked digitizer which I'll be replacing this weekend. (Not sure if this is causing the problems, could it?)
- I was told that the OS was still stock, but I know that's not true now.
- During the first 12 hours I used it, I had no problems.
- Then while I was playing music it rebooted and went to the HTC boot up screen with the red text. Stopped then rebooted again to the normal HTC boot up screen but just hanged there and vibrated nonstop.
- I then used the power button to force a shut down and haven't been able to use it since then.
Here's where I'm at now:
- I'm able to get to the bootloader screen sometimes with the VOL DOWN+PWR method, but most of the time it goes to the QHSUSB mode.
- When I can get to the bootloader, I try to get to Fastboot or Recovery mode but once I press the power button it just stops and does nothing.
- The few times I have gotten into fastboot, and plug in an USB cable, it hangs.
- So far I have NOT gotten it to show "FASTBOOT USB" therefore I haven't been able to use a RUU or flash a boot.img.
- I have reinstalled the drivers almost 5 times now, and tried with different sources from here and HTC Sync. And also tried with 3 different cables and USB ports on my laptop. But still no signs of a connection with my laptop.
- And at one time I (before I knew I shouldn't have) I did try to Factory Reset from the bootloader, but nothing happened. I hope that won't become my downfall.
But yeah, sorry again for the long post, just trying to be thorough. If anyone has an idea of what I can do, please I need your help. It really doesn't matter to me whether my HOX goes back to stock, or use a ROM like CleanROM 6, as long as I can use it again.
Also here's the info at the bootloader screen.
***TAMPERED***
***LOCKED***
Evita PVT Ship S-ON RL
HBOOT-1.14.0002
Radio-0.19as 32.09.11_2
OpenDSP-V29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
Click to expand...
Click to collapse
You will have to get a proper fastboot connection before you can do anything. Then unlock the bootloader then you can flash a recovery on there. Is this an AT&T phone?
exad said:
You will have to get a proper fastboot connection before you can do anything. Then unlock the bootloader then you can flash a recovery on there. Is this an AT&T phone?
Click to expand...
Click to collapse
Thanks for the reply. Yes, it is an AT&T phone. I understand that I need a fastboot connection, I'm just having difficulties timing it. Is it normally this difficult to get a FASTBOOT USB connection? Or is there something else that I could be missing, or any other method?
I have thought about booting Windows XP on my laptop from a flash drive then trying to connect from that. Does XP have a better record when it comes to unlocking and flashing with android?
If you did a factory reset from bootloader your sd is corrupted. When you can get into the bootloader what does it do if you click on recovery?
Sent from my HTC One X using xda app-developers app
pharrjw said:
Thanks for the reply. Yes, it is an AT&T phone. I understand that I need a fastboot connection, I'm just having difficulties timing it. Is it normally this difficult to get a FASTBOOT USB connection? Or is there something else that I could be missing, or any other method?
I have thought about booting Windows XP on my laptop from a flash drive then trying to connect from that. Does XP have a better record when it comes to unlocking and flashing with android?
Click to expand...
Click to collapse
There's nothing to time. Drivers and fastboot/adb are all you need. HTC Sync can get in the way so kill or uninstall it if it's running. When you boot to Bootloader, select fastboot, plug in the phone, if you have the the drivers it should go into fastboot USB. I have seen people having issues before due to something interfering with the HTC drivers but it's not common. You can try creating a VM for a clean environment with less chance of anything interfering.
Thanks again for the replies guys.
31ken31 said:
If you did a factory reset from bootloader your sd is corrupted. When you can get into the bootloader what does it do if you click on recovery?
Click to expand...
Click to collapse
I was just able to get back into Bootloader, and tried to go into recovery, but with no luck. It just hangs at the bootloader screen. :
EDIT: Not sure if relevant, but after that it eventually shut down, and when I checked it in the Device Manager it appeared again as QHSUSB-DLOAD.
exad said:
There's nothing to time. Drivers and fastboot/adb are all you need. HTC Sync can get in the way so kill or uninstall it if it's running. When you boot to Bootloader, select fastboot, plug in the phone, if you have the the drivers it should go into fastboot USB. I have seen people having issues before due to something interfering with the HTC drivers but it's not common. You can try creating a VM for a clean environment with less chance of anything interfering.
Click to expand...
Click to collapse
I'm gonna try it again with HTC Sync uninstalled. But if I get the same results I'll probably will endup creating a VM, and hopefully get better results.
I would also like to add that when I do try to get to the bootloader I get various results. Sometimes it goes into QHSUSB like I said in my first post. Then sometimes just nothing but a blank screen and the LED light blinking like the battery is low, or it's solid as if it is charging even though my HOX isn't plugged in to anything. That's what I was referring to when I said I was having difficulties timing it.
pharrjw said:
Thanks again for the replies guys.
I was just able to get back into Bootloader, and tried to go into recovery, but with no luck. It just hangs at the bootloader screen. :
EDIT: Not sure if relevant, but after that it eventually shut down, and when I checked it in the Device Manager it appeared again as QHSUSB-DLOAD.
I'm gonna try it again with HTC Sync uninstalled. But if I get the same results I'll probably will endup creating a VM, and hopefully get better results.
I would also like to add that when I do try to get to the bootloader I get various results. Sometimes it goes into QHSUSB like I said in my first post. Then sometimes just nothing but a blank screen and the LED light blinking like the battery is low, or it's solid as if it is charging even though my HOX isn't plugged in to anything. That's what I was referring to when I said I was having difficulties timing it.
Click to expand...
Click to collapse
factory reset in bootloader corrupts the SD card. We wont worry about that just yet as there's nothing we can do about it until we can get recovery on there.
You're going to have to be very careful because it sounds like your EMMC partitions might have some issues. if you can get it to bootlaoder KEEP IT AT THAT SCREEN. don't power it off or anything, leave it there. Because one wrong move could be a perma brick. If we can get a rom on there to S-OFF with, we can RUU to restore your emmc partitions.

[SOLVED] Did I brick?

Hey everyone,
So I think I may have done something strange and i'm not sure how to fix it. Long story short, screen cracked, so I bought a new one and I used TWRP to backup my original phone. So now, i'm just trying to unlock and root, you know, the usual. BTW, I tried using ABD/Fastboot, which I never typically do, but I heard it was more efficient and whatnot so I thought I try. I think the unlocking of the bootloader went well. And I even think I flashed recovery properly. But when I tried to access recovery, it prompted me for a password.
I read on the TWRP site I was supposed to let the phone boot as normal before accessing recovery. Oops. So I tried formatting all the data on the phone and no I have no OS or any files to recover from and adb push keeps giving me "Device not found" and now I don't know what to do.
Help?
EDIT: In case anyone has this issue searching threads, I just used Wug Toolkit to flash everything back to stock and then used the same Toolkit to unlock and root. TWRP isn't going to recognize a backup from a different phone. To my understanding, there is a way around that, but I didn't look into it. Oh, and apparently, don't flash the EFS partition lol
New Jer-Z said:
Hey everyone,
So I think I may have done something strange and i'm not sure how to fix it. Long story short, screen cracked, so I bought a new one and I used TWRP to backup my original phone. So now, i'm just trying to unlock and root, you know, the usual. BTW, I tried using ABD/Fastboot, which I never typically do, but I heard it was more efficient and whatnot so I thought I try. I think the unlocking of the bootloader went well. And I even think I flashed recovery properly. But when I tried to access recovery, it prompted me for a password.
I read on the TWRP site I was supposed to let the phone boot as normal before accessing recovery. Oops. So I tried formatting all the data on the phone and no I have no OS or any files to recover from and adb push keeps giving me "Device not found" and now I don't know what to do.
Help?
Click to expand...
Click to collapse
I never heard of this problem before, maybe you can use Odin to flash the recovery again
Sent from my Galaxy S4 using Tapatalk p.s if I helped you peles hit the thanks button
mpalomba3 said:
I never heard of this problem before, maybe you can use Odin to flash the recovery again
Sent from my Galaxy S4 using Tapatalk p.s if I helped you peles hit the thanks button
Click to expand...
Click to collapse
Oh, that reminds me, TWRP wasn't able to mount any of the directories, it seems. I think it can, now, but I remember seeing those errors in the log before I wiped everything. Thanks for that suggestion, i'll give it a shot.
No problem, report back if it works
Sent from my Galaxy S4 using Tapatalk p.s if I helped you peles hit the thanks button
I can't seem to find on the internets which odin version is compatible with the Nexus 5. I'm not finding any hits to directly correlate and I don't want to damage further. Which one would you recommend?
Odin is for Samsung devices
sent from my HAMMERHEAD neXus
New Jer-Z said:
I can't seem to find on the internets which odin version is compatible with the Nexus 5. I'm not finding any hits to directly correlate and I don't want to damage further. Which one would you recommend?
Click to expand...
Click to collapse
Odin is a Samsung thing. Not LG.
What you'll need to do is flash the 4.4.2 factory image. Follow this guide: http://forum.xda-developers.com/showthread.php?t=2513701
El Daddy said:
Odin is a Samsung thing. Not LG.
What you'll need to do is flash the 4.4.2 factory image. Follow this guide: http://forum.xda-developers.com/showthread.php?t=2513701
Click to expand...
Click to collapse
OK!
So, I used the Wug toolkit to basically flash everything to stock, and then root it. I installed TWRP using the app and I tried using the app to restore from my earlier back up. So, it boots into recovery but nothing happened. Looking at the log, it says the TWRP isn't able to locate the files. Trying to just restore from recovery isn't helpful because when I hit "Restore" nothing pops up. As if the SDCard partition isn't being accessed. I can't see any of the files in any directory. Anyone have any ideas?
You need to let the phone boot into android before flashing a custom recovery.
Sent from my Nexus 10 using Tapatalk
El Daddy said:
You need to let the phone boot into android before flashing a custom recovery.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
I realize that now lol. Well, I fixed that, but now have a new issue. Any ideas for me?
Flashing the factory image erases everything. Such as backups stored on your phone.
Sent from my Nexus 10 using Tapatalk
El Daddy said:
Flashing the factory image erases everything. Such as backups stored on your phone.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
I had a copy saved on my desktop, so I transferred it back.
New Jer-Z said:
I can't seem to find on the internets which odin version is compatible with the Nexus 5. I'm not finding any hits to directly correlate and I don't want to damage further. Which one would you recommend?
Click to expand...
Click to collapse
Sorry about that, I have a gs4 so I thought Odin was for all devices
Sent from my Galaxy S4 using Tapatalk p.s if I helped you peles hit the thanks button
New Jer-Z said:
I had a copy saved on my desktop, so I transferred it back.
Click to expand...
Click to collapse
Did you put the backup on the root of the sdcard? I think it needs to be in the TWRP folder. You should first make a backup of your current rom even if it's stock rooted.
Sent from my Nexus 5 using Tapatalk
housry23 said:
Did you put the backup on the root of the sdcard? I think it needs to be in the TWRP folder. You should first make a backup of your current rom even if it's stock rooted.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Someone explained to me TWRP won't recognize a backup with a serial number from a different phone. So essentially, I will just have to forego it. I used Wug Toolkit to fix this issue and just flashed everything to stock and had the same toolkit unlock and root. Using ADB was a fail and cost me a whole afternoon lol

Categories

Resources