I have flashed KITKAT 4.4.2 by superdragonpt on my micromax canvas 2, ICS out of the box, I followed the steps mentioned in the OP exactly 3-4 times. I am using TWRP 2.7.1 recovery by Bindassdost, but every time I am having a wifi issue. No one on the forum seems to be having this problem. Wifi gets stuck but switches on sometimes, connects on repeatetly switching on-off and works for 2-3 seconds and then the link speed shown is 0mbps. On switching off wifi, phone gets restarted too. I searched this bug and tried to copy system/lib/modules from 4.2.2 ROM but no luck. Can someone help ? :crying:
Reflash the ROM step by step .
I already tried 3 times using TWRP and once using Philz recovery. I wipe cache, dalvik, data, system and flash kernel, flash rom and flash kernel again. But everytime wifi is buggy. It was working fine in 4.2.2. any other suggestions ?
factory restore and then flash v1.0
Its a Kernel Issue. Just google and flash another kernel. :laugh::laugh::laugh::good::good:
Hit thanks if I helped
aseem00y said:
Its a Kernel Issue. Just google and flash another kernel. :laugh::laugh::laugh::good::good:
Hit thanks if I helped
Click to expand...
Click to collapse
It was not a kernel issue. I flashed Lime ROM 1.2 kk 4.4.2 by marcaD, WiFi was working in it. So I figured out few system/etc/firmware files missing. I have copied them and now its working fine.
Related
Hi all,
i managed to flash my P6200, i've tried
CyanogenMod 10 by aorth (http://forum.xda-developers.com/showthread.php?t=1842090)
I'm using CWM v5 (and now 6), and now i'm stuck with the bootloop (boot unfinished restarted around 5 times or so then it successfully goes into cyanogenmod logo screen and stuck forever), i've tried to rewipe and install the mod and also redownload the mod, it doesn't work at all
i also looked at:
Paranoid Android v2.5 by Androguide.fr (http://forum.xda-developers.com/showthread.php?t=1941615) got the new download link but also stuck in bootloop
is there any available download links or so?
EDIT:
now i'm using CWM 6 and still got bootload any help?
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
gabripranzo said:
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
Click to expand...
Click to collapse
okay i gave then i'll try it with CWM 6
tried with CWM 6 and still not working... is there any advance setting that i'm missing?
Here's what i do:
1. Wipe data
2. Wipe cache
3. Wipe Dalvik Cache
4. install ROM
5. install Gapps
6. Reboot
There's mount and storage setting that i don't quite understand, is there something to do with it?
UPDATE: I Finally solved it...
I installed stock ICS from: http://forum.xda-developers.com/showthread.php?t=1777303&highlight=stock
with Odin (having bad luck with crashing / not detecting Heimdall :crying
It finally boot...!!! and i got ICS..!!! well, i don't stop, next:
Reinstall CWM 6, Backup, Wipe-wipe-wipe, install Paranoid Android v2.50 and Voila...!!!
it boot correctly... maybe i'll try cyanogen soon after updating this PA and done backing up...
Sorry for troubling and hopefully it helps others...
I have flashed both aorth's CM10 and PA, both work fine. However, aorth's CM10 is much better, battery life etc. Make sure to backup and do full wipes if switching between different ROMs. If just upgrading to new aorth CM10s or new PAs from previous versions, cache and dalvik wipes are all that's needed.
Sent from my GT-P6210 using Tapatalk 2
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
YES
MontyTheSpecial said:
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
Click to expand...
Click to collapse
YES...
to CM10
Hi guys. Al thou this is my first post I've been flashing my i9003 for a year or so and i've never had any problems until now.
I have an stock gingerbread installed (XXKPQ) that I flashed using odin, kernel version (2.6.35.7-CL709629 [email protected] #1)
Just so you know, I'm from Argentina, and in order to be able to use 3g, had to keep the modem in I9003LUBKB1 version.
I also flashed cf root (by Skin1980) and I'm using CWM v1.80
I get the latest jellybam (1.3) from this post: http://forum.xda-developers.com/showthread.php?t=1972087
And followed the instructions in the official website : http://www.igio90.net/how-to-install/
Just in case you're too lazy to follow the link here are the instructions:
What to do if you are coming from a Stock, CyanogenMod, MIUI, AOKP and any other custom ROM different from JellyBam
-Download the latest revision of JellyBam ROM for your device
-Place the zip into your internal SDCard
-Boot into CWM recovery (Home+Power+Volume up until samsung logo appear)
-Wipe data/factory reset
-Wipe dalvik cache (Inside advanced tab)
-Install zip from internal SDCard
-Welcome to JellyBam!
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
The first time I run the installer it got stuck at 50% while installing sony's media player. So i just started the process again and uncheked sony walkman player, it installed "successfully".
When the phone restarted, it was just the old gingerbread, in the about phone panel, it was all the same that before installing jellybam.
So it obviously didn't installed. I can make calls, send and receive messages, wifi is working fine.
So can anyone tell me what am I doing wrong? Do i have to flash a jellybean kernel?, I dont really know hoe to do that but I'm sure there's more than one post around here that explains that process.
If this question has already been posted I'm really sorry, I did search for any post that could help me with this problem but I didn't find any real answer.
I really hope somebody can help me, and sorry for the bad english, I did study the language but it was a long time ago.
Thanks everybody, specially to developers, you're awesome.:good:
I think you should fist flash theJellyBam v1.1.0 alpha4 in order to repartition before flash the v1.3. hope it can help u.
Sent from my GT-I9003 using xda app-developers app
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
flashing 1.1 first worked great.
I'm having issues thou, don't know if this are known bugs or just happens to me.
I can't get any signal, gonna try flashing this:
http://forum.xda-developers.com/showthread.php?t=2029921&highlight=cm10+signal+fix
And seems like the phone can't detect when it's plugged to a usb port
narshade said:
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
Click to expand...
Click to collapse
Wiping the data does not affect your Internal/External storage.
chongns said:
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
jawadlotfi said:
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
Click to expand...
Click to collapse
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
imboy25 said:
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
jawadlotfi said:
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
Click to expand...
Click to collapse
Good luck! i hope you flash it correctly! just read and follow the instructions in the cm10 thread thoroughly so you can avoid any problems.
All custom rom unofficial, not compile, but directly modify our base cyanogen
It is recommended to start on a CM10 origin
Example A3 to A4
KPE> LF2> CF-LF2
Wipe Data / Factory Reset. (MUST DO THIS STEP)
Select the CM10 A4.zip from your SD Card and flash.
Auto rebooted into recovery (if it show error mounting / cache, and cant mount in manually mount and storage, do wipe / cache)
Go to Advanced -> Reboot Recovery
Select the CM10 A4.zip from your SD Card and flash again
Go to Advanced -> Reboot Recovery.
Mounts and Storage -> Format dbdata (you would not find this in CWM so just ignor 6)
8. reboot
You can then flash all based on Unofficial Alpha 4
Just do the basic procedure wipe
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try using the base rom as v5.6.11 and try using the old twrp v2.8.7
I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.
Try provide with a logcat, might be more useful in helping you.
No other custom rom is working on my mi4i
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..?
sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
astro49 said:
I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you restore your nandroid backup like CM12, Mowkee, Resurection if you from new MIUI ROM.
If you want to restore MIUI7 nandroid backup from CM12 you need to flash MIUI7 patch ROM first.
RIYAN X55TU said:
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you flash to CM13, if not you'll get bootloop. If you use default init.qcom.post_boot.sh and your phone heat up it will lags, so use edited init.qcom.post_boot.sh.
Confirmed
Glembozt said:
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
Click to expand...
Click to collapse
I can confirm that this DID magically works!
No need to use the old TWRP, just flash MIUI V6.6.6(I used the fastboot package[1], not sure if recovery package works) then flash TWRP then flash other custom OSes.
[1] bigota.d.miui.com/V6.6.6.0.LXIMICF/ferrari_global_images_V6.6.6.0.LXIMICF_20150521.0000.3_5.0_global_46b5474265.tgz
I flashed latest CM 13 nightly (cm-13.0-20160910-NIGHTLY-falcon.zip) and facing some issues: (Moto g xt1033 Cm13)
1. Simcard is not detecting.
2. Whenever i try to call it just reboots.
It is showing me IMEI number so, thats mean simcard is working....
and other things that i think can be problem:
I have bricked my phone and recovered by using this thread http://forum.xda-developers.com/moto...oto-g-t2833798.
whenever i try to flash stock firmware it just reboots to recovery everytime (tried all android version of stock).
Only cm13 able to boot successfully and above mentioned problems occurs.....
PLEASE HELP ME AS THIS IS MY PRIMARY DEVICE......
Thank you so much.......
iHackIt said:
I flashed latest CM 13 nightly (cm-13.0-20160910-NIGHTLY-falcon.zip) and facing some issues: (Moto g xt1033 Cm13)
1. Simcard is not detecting.
2. Whenever i try to call it just reboots.
It is showing me IMEI number so, thats mean simcard is working....
and other things that i think can be problem:
I have bricked my phone and recovered by using this thread http://forum.xda-developers.com/moto...oto-g-t2833798.
whenever i try to flash stock firmware it just reboots to recovery everytime (tried all android version of stock).
Only cm13 able to boot successfully and above mentioned problems occurs.....
PLEASE HELP ME AS THIS IS MY PRIMARY DEVICE......
Thank you so much.......
Click to expand...
Click to collapse
1. Firstly Bro calm down and have some patience while installing ROM's.
2. You have to totally reset your device back to stock. Factory reset it and wipe all data incl.system,apps caches.
3. Download stock rom "untouched version" 5.0.1 from this link http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 according to your devices' model. (P.S. remember to thank him.)
4. Restart your phone in fastboot mode by pressing pwr+vol down button together for 10 secs. and flash evrything using fastboot...evrything incl the recovery.
5. Your device must be booted to stock now.
6. Root it again flash recovery,flash a custom rom..and enjoy.
Note: If the device is your primary device,take a lot of backup's before hand and be cautious and read forums before flashing a new ROM. :laugh:
karanksj said:
1. Firstly Bro calm down and have some patience while installing ROM's.
2. You have to totally reset your device back to stock. Factory reset it and wipe all data incl.system,apps caches.
3. Download stock rom "untouched version" 5.0.1 from this link http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 according to your devices' model. (P.S. remember to thank him.)
4. Restart your phone in fastboot mode by pressing pwr+vol down button together for 10 secs. and flash evrything using fastboot...evrything incl the recovery.
5. Your device must be booted to stock now.
6. Root it again flash recovery,flash a custom rom..and enjoy.
Note: If the device is your primary device,take a lot of backup's before hand and be cautious and read forums before flashing a new ROM. :laugh:
Click to expand...
Click to collapse
Yes i have flashed all the files step by step the untouched version of android 5.1. While flashing there was no error in flashing.
after flashing stock rom mu device always reboots to the recovery. (i also wiped all partitions before flashing.
Thank you for reply.
iHackIt said:
Yes i have flashed all the files step by step the untouched version of android 5.1. While flashing there was no error in flashing.
after flashing stock rom mu device always reboots to the recovery. (i also wiped all partitions before flashing.
Thank you for reply.
Click to expand...
Click to collapse
I quoted 5.0.1 not 5.1 brother It worked for me every time.
karanksj said:
I quoted 5.0.1 not 5.1 brother It worked for me every time.
Click to expand...
Click to collapse
Sorry for misreading...:silly:
I cant flash 5.0.1, 4.4.2,4.4.4
When i try to flash it gives errors and warnings (only 5.1 works )
i will share errors...
works in the sense it was flashed perfectly but it also boots to the recovery everytime like CM13
My bootloader version is 41.1A..
After flashing android n rom my devices stuck in boot loop
This is not the case with single rom. I am getting boot loop for every android n roms.
I am currently using cyanogemmod 6.0.1.
please help if you have solution.
Dush4711 said:
After flashing android n rom my devices stuck in boot loop
This is not the case with single rom. I am getting boot loop for every android n roms.
I am currently using cyanogemmod 6.0.1.
please help if you have solution.
Click to expand...
Click to collapse
Make you are flashing it correctly.
Wait for at least 20 30 mins.
Reply so i can help you further.
Also mention the steps you did.
ethicalhacker365 said:
Make you are flashing it correctly.
Wait for at least 20 30 mins.
Reply so i can help you further.
Also mention the steps you did.
Click to expand...
Click to collapse
Steps:
Wipe dalvik cache,cache,data,system.
Installing zip.
Reboot to system.
After that phone stuck at boot logo and after some time I felt vibration but phone is not booting up.
I forgot to mention that this problem is with only android n ROMs and
All android m ROMs are working perfectly.
Thank you.
Dush4711 said:
Steps:
Wipe dalvik cache,cache,data,system.
Installing zip.
Reboot to system.
After that phone stuck at boot logo and after some time I felt vibration but phone is not booting up.
I forgot to mention that this problem is with only android n ROMs and
All android m ROMs are working perfectly.
Thank you.
Click to expand...
Click to collapse
I would recommend to follow the steps wisely exactly as i have written.
First copy the rom and gapps file to internal storage and remove sd card and sim cards.
I would recommend rr 5.8.0. It is the best custom ROM i know.
Factory reset.
Go to advanced wipe.
Select only davlik/art cache
I think that you select system and data that is the main cause of the problem.
Now install the rom.
Ike of helpful.
ethicalhacker365 said:
I would recommend to follow the steps wisely exactly as i have written.
First copy the rom and gapps file to internal storage and remove sd card and sim cards.
I would recommend rr 5.8.0. It is the best custom ROM i know.
Factory reset.
Go to advanced wipe.
Select only davlik/art cache
I think that you select system and data that is the main cause of the problem.
Now install the rom.
Ike of helpful.
Click to expand...
Click to collapse
Thanks
Will try after 2 days as I am currently out of town.
Reply you later
Please don't mind.
U are not doing it correctly.
Goto-twrp-wipedata-advanced-check(dalvik/art,Data & Internal Storage) dont check system.
After it Flash with any Custom Rom
Then Wipe-dalvik/art,Data & Internal Storage) uncheck system
Flash Gapps
Again Wipe-dalvik/art,data & internal storage)
Reboot to System
Wait Aleast (10-15)-For me After Flashing 6.0.1 Cyanogenmod from Official Website.
Finish(You have no problem of bootloop)
Hits thanks if you solve this way.
None of the solutions mentioned above worked for me...and the bootloop is only with Android N Roms only. Ihave also tried the official Lineage Os for Yu Yunique, it is also stucking in bootloop. All roms other than Android N (Marshmallow , lollipop ) are working fine.
dh.y said:
None of the solutions mentioned above worked for me...and the bootloop is only with Android N Roms only. Ihave also tried the official Lineage Os for Yu Yunique, it is also stucking in bootloop. All roms other than Android N (Marshmallow , lollipop ) are working fine.
Click to expand...
Click to collapse
Bro search on google Phantom Kernel jalebi. You will get 31st dec, 2016 build of phantom on android file host.
Install rom.
install gapps.
at last install phantom kernel.
rom will boot....
ankitdhimancr said:
Bro search on google Phantom Kernel jalebi. You will get 31st dec, 2016 build of phantom on android file host.
Install rom.
install gapps.
at last install phantom kernel.
rom will boot....
Click to expand...
Click to collapse
Yap it boots but problem is battery discharged within 1 hour
Yeah..phantom kernel will work but on other hand this kernel eats up battery and take to much time on charging usually 3-4 hours
Try censium kernel