Hello, sorry if this has been asked before but my phone has been having trouble connecting to LTE for some reason. I'm assuming it has something to do with my radios or something along those lines. My friend is able to connect just fine and he is on the same rom as I and he also has the same phone.
If someone could point me in the right direction that would be awesome!
Thanks!
iFrostyy said:
Hello, sorry if this has been asked before but my phone has been having trouble connecting to LTE for some reason. I'm assuming it has something to do with my radios or something along those lines. My friend is able to connect just fine and he is on the same rom as I and he also has the same phone.
If someone could point me in the right direction that would be awesome!
Thanks!
Click to expand...
Click to collapse
Are you stock? S-off? Which firmware are you on?
brholt6 said:
Are you stock? S-off? Which firmware are you on?
Click to expand...
Click to collapse
I am s-off and I am on a GPE 5.0.1 ROM.
iFrostyy said:
I am s-off and I am on a GPE 5.0.1 ROM.
Click to expand...
Click to collapse
Did you flash the custom firmware with it too? If so that's likely the problem. Been hearing of a lot of radio issues from L gpe roms lately.
A factory reset in stock recovery (stock vzw recovery) usually fixes it.
Sent from my HTC6525LVW using Tapatalk
dottat said:
Did you flash the custom firmware with it too? If so that's likely the problem. Been hearing of a lot of radio issues from L gpe roms lately.
A factory reset in stock recovery (stock vzw recovery) usually fixes it.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
The custom firmware seems to cause the issue worse than the 4.4.4 firmware. Most everyone seems to be having this issue but overlook. It also makes loading web pages really slow. Flashing the stock RUU and factory reset did not change anything, it seems the firmware is not right for Verizon phones.
LibertyMonger said:
The custom firmware seems to cause the issue worse than the 4.4.4 firmware. Most everyone seems to be having this issue but overlook. It also makes loading web pages really slow. Flashing the stock RUU and factory reset did not change anything, it seems the firmware is not right for Verizon phones.
Click to expand...
Click to collapse
If you flashed the vzw ruu you are no longer on custom firmware.
dottat said:
If you flashed the vzw ruu you are no longer on custom firmware.
Click to expand...
Click to collapse
That was just to start over, I then tried the custom firmware a few more times on multiple ROM's with the same results. Constant signal loss and slow data speeds.
LibertyMonger said:
That was just to start over, I then tried the custom firmware a few more times on multiple ROM's with the same results. Constant signal loss and slow data speeds.
Click to expand...
Click to collapse
That custom firmware should not be flashed to a vzw phone. I have no idea why he posted that firmware to be flashed. You can tell by the info.txt file that it was not.
The included wcnss was never intended to be used on a vzw phone for cdma/lte access.
Wireless connectivity networking subsystem.
OP, your best bet is to flash a stock Verizon RUU (this one works great and is for S-OFF devices), then once it is fully flashed, go into stock recovery and then do a factory reset (this is an important step, this is where you get your proper Verizon radio settings/files back!).
After that, you can go ahead and flash back to DH GPE without using custom firmware and you should be fully functional again with LTE.
And to repeat, you MUST do a factory reset from stock recovery, don't skip this step!
Croak said:
OP, your best bet is to flash a stock Verizon RUU (this one works great and is for S-OFF devices), then once it is fully flashed, go into stock recovery and then do a factory reset (this is an important step, this is where you get your proper Verizon radio settings/files back!).
After that, you can go ahead and flash back to DH GPE without using custom firmware and you should be fully functional again with LTE.
And to repeat, you MUST do a factory reset from stock recovery, don't skip this step!
Click to expand...
Click to collapse
Think that horse was beat dead already lol
Sent from my SM-T320 using Tapatalk
dottat said:
That custom firmware should not be flashed to a vzw phone. I have no idea why he posted that firmware to be flashed. You can tell by the info.txt file that it was not.
The included wcnss was never intended to be used on a vzw phone for cdma/lte access.
Wireless connectivity networking subsystem.
Click to expand...
Click to collapse
Now I am lost lol. Why is it even posted in the Verizon Forum? Too many carriers in that thread i can't keep up with it all I work too much.
LibertyMonger said:
Now I am lost lol. Why is it even posted in the Verizon Forum? Too many carriers in that thread i can't keep up with it all I work too much.
Click to expand...
Click to collapse
It was made for the gpe version phones. They weren't sold for vzw.
dottat said:
It was made for the gpe version phones. They weren't sold for vzw.
Click to expand...
Click to collapse
Yeah I think most who are using it are either lucky or do not care or notice the dropped, weak signals. I've tried everything more than once to get it working right and the results are always the same, it acts like it's the wrong firmware, cause it is lol. Some claim to have the same issues but ignore them. I need my phone to work no matter what ROM it is. Thanks for all your help bro I see you are willing to help us when in need, that is greatly appreciated. I hope users send donations your way, I sure will once i get ahead again.
Have you set your APP correctly.
So I just tried this and cannot get back into stock recovery to wipe data. Had to factory reset from hboot, that worked but not sure if it does the same thing as the one in stock recovery, please advise. Then tried to flash the stock recovery and it's still taking me to the darn red triangle with an exclamation point. I am going to continue and install LiquidSmooth 4.0 1-02 nightly after I flash custom recovery. I have searched but cannot find anything on our variant. Thank you all in advance.
kj13569 said:
So I just tried this and cannot get back into stock recovery to wipe data. Had to factory reset from hboot, that worked but not sure if it does the same thing as the one in stock recovery, please advise. Then tried to flash the stock recovery and it's still taking me to the darn red triangle with an exclamation point. I am going to continue and install LiquidSmooth 4.0 1-02 nightly after I flash custom recovery. I have searched but cannot find anything on our variant. Thank you all in advance.
Click to expand...
Click to collapse
When you get the red triangle, you press volume up and power to enter stock recovery. Keep practicing.
LTE drops on and off
I think I have the same issue as OP. However, I'll go further and note that I notice this on ALL AOSP roms as well as the GPe rom. It's not so much that the connection is bad, it looks good. But it drops on and off randomly. I followed the instructions here to factory reset the firmware using the 4.4.4 ruu. It definitely seems to be better but I still have this issue in DH's GPe (stock kernel). Any further ideas?
Flylowguy said:
I think I have the same issue as OP. However, I'll go further and note that I notice this on ALL AOSP roms as well as the GPe rom. It's not so much that the connection is bad, it looks good. But it drops on and off randomly. I followed the instructions here to factory reset the firmware using the 4.4.4 ruu. It definitely seems to be better but I still have this issue in DH's GPe (stock kernel). Any further ideas?
Click to expand...
Click to collapse
That signal drop off issue happens to me on gpe ROMs. So far all the cm12 ROMs out there have had a perfect signal with good speeds for me. I think the signal drop off issue is something to do with the gpe ROMs.
Currently running blisspop newest nightly with 4.4.4 straight from RUU.
Related
Hi, I can't seem to find my way around this issue. Every time I try to open any camera app, it doesn't allow me and says it's unable to connect. Is there no sure solution to this yet? I tried flashing new cameras through recovery. Nothing works at all. I have tried flashing fixes from several threads on a clean start, different camera apps, clearing caches, clean wiping, and other things I can't even remember at this point with all the frustration. What's up with this?
TW based ROMs work. AOSP seems to not. I lost the thread explaining how to dial the codes into a TW based ROM, but another problem with this for me is, I am extremely confused as to how to do some of the steps explained in that thread (hence why I closed it, looks like that should be the way out for me though?).
Same problem
CZory91 said:
Hi, I can't seem to find my way around this issue. Every time I try to open any camera app, it doesn't allow me and says it's unable to connect. Is there no sure solution to this yet? I tried flashing new cameras through recovery. Nothing works at all. I have tried flashing fixes from several threads on a clean start, different camera apps, clearing caches, clean wiping, and other things I can't even remember at this point with all the frustration. What's up with this?
TW based ROMs work. AOSP seems to not. I lost the thread explaining how to dial the codes into a TW based ROM, but another problem with this for me is, I am extremely confused as to how to do some of the steps explained in that thread (hence why I closed it, looks like that should be the way out for me though?).
Click to expand...
Click to collapse
I am having the same problem you are. I am running paranoid android and cant get the camera / gallery to work. I hope somebody can help. I had it working on Beans rom build 13 but that is TW. I am going to have to bail on pa if there isn't a fix
bmanderle said:
I am having the same problem you are. I am running paranoid android and cant get the camera / gallery to work. I hope somebody can help. I had it working on Beans rom build 13 but that is TW. I am going to have to bail on pa if there isn't a fix
Click to expand...
Click to collapse
It's an AOSP problem based on the firmware of your camera when getting the phone from what I've seen.
http://forum.xda-developers.com/showthread.php?p=37072484#post37072484
Here's the thread I was talking about, however I'm confused about how to go about zipping and unzipping these files. Or even how to get to them to place the files in to begin with considering internal SD card is the only thing that comes up for USB storage. Unless you're supposed to move them in and out from within android.
Would really like a confirm on whether or not this works for the Verizon version, and whether or not it's a different process/if this even works at all, rather not break it fully
Why is this not more of a widespread issue? it seems so crucial that many are having but nobody seems to be talking about it or wanting to find a definite fix for it?
CZory91 said:
Would really like a confirm on whether or not this works for the Verizon version, and whether or not it's a different process/if this even works at all, rather not break it fully
Why is this not more of a widespread issue? it seems so crucial that many are having but nobody seems to be talking about it or wanting to find a definite fix for it?
Click to expand...
Click to collapse
I had the camera problem on MIUI...
Before flashing, I made a backup of my system with CW
I extracted the SlimISP_ZH.bin from my backup and
copied it to my /data directory and it worked fine.
Link: d-h.st/dwx
(I can't post links yet)
maybe... someone post the fix in this forum and make it sticky... lol
Ughhhhhhhhh. This is getting irritating. Going to revive the thread.
I flashed the new firmware (MD3) for this phone. I had everything good and working with CM10... Guess what, borken camera, same issues...
I can't post links yet, but it's in the android development thread with this title:
★ [Rom][I535VRBMD3][4.1.2] Stock Root Odex/Deodex [05/29/13]★
Except... this time I cannot do the simple copy/paste of the bin files this time, why is that?
At this point I just want my VRBLK3 (I think?) firmware back.. Where can I get it to reverse what I just downloaded, in essence?
Also.. What the heck kind of hurdles am I going to have to go through when CM10.1 is complete?.. I don't think I'll be updating my phone past 10.1 at this rate if this continues, really irritating.
CZory91 said:
Ughhhhhhhhh. This is getting irritating. Going to revive the thread.
I flashed the new firmware (MD3) for this phone. I had everything good and working with CM10... Guess what, borken camera, same issues...
I can't post links yet, but it's in the android development thread with this title:
★ [Rom][I535VRBMD3][4.1.2] Stock Root Odex/Deodex [05/29/13]★
Except... this time I cannot do the simple copy/paste of the bin files this time, why is that?
At this point I just want my VRBLK3 (I think?) firmware back.. Where can I get it to reverse what I just downloaded, in essence?
Also.. What the heck kind of hurdles am I going to have to go through when CM10.1 is complete?.. I don't think I'll be updating my phone past 10.1 at this rate if this continues, really irritating.
Click to expand...
Click to collapse
did you flash this after flashing the rom?
http://forum.xda-developers.com/showthread.php?t=1788313
---------- Post added at 04:47 AM ---------- Previous post was at 04:41 AM ----------
dandydon414 said:
did you flash this after flashing the rom?
http://forum.xda-developers.com/showthread.php?t=1788313
Click to expand...
Click to collapse
my advice, odin back to stock (4.1.2), root and install this rom
http://forum.xda-developers.com/showthread.php?t=1788313
has been great for me, no issues whatsoever
dandydon414 said:
did you flash this after flashing the rom?
http://forum.xda-developers.com/showthread.php?t=1788313
---------- Post added at 04:47 AM ---------- Previous post was at 04:41 AM ----------
my advice, odin back to stock (4.1.2), root and install this rom
http://forum.xda-developers.com/showthread.php?t=1788313
has been great for me, no issues whatsoever
Click to expand...
Click to collapse
Yes, that is the post. I also tried MB1 out of curiosity, no dice on either of them. I had a perfectly working CM10. I dun goofed :\.
That was my next step (rerooting, installing that firmware AIO, and then installing CM10). However my question is this, what happens when more firmware comes out? I have to re root and start over again?
If you flashed md3 just flash back mb1 and you will fix that problem. I had the issue. Pulled the firmware from invisiblek for mb1 and back to normal on liquid smooth
Sent from my GT-P5113 using xda premium
bbqsfire said:
If you flashed md3 just flash back mb1 and you will fix that problem. I had the issue. Pulled the firmware from invisiblek for mb1 and back to normal on liquid smooth
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
for some reason I haven't good luck running cm roms on the s3........have much better luck with tw based rom. that's why I recommend a restock and basically start all over from scratch
dandydon414 said:
for some reason I haven't good luck running cm roms on the s3........have much better luck with tw based rom. that's why I recommend a restock and basically start all over from scratch
Click to expand...
Click to collapse
Yeah I think a clean slate is definitely needed from time to time. I swap roms frequently but liquid gives me the best battery life right now from my tests so I keep going back. I Get scared telling people to odin because so mant people soft brick while screwing up a flash inodin or hard brick because they flash a non Verizon rom
Sent from my GT-P5113 using xda premium
bbqsfire said:
Yeah I think a clean slate is definitely needed from time to time. I swap roms frequently but liquid gives me the best battery life right now from my tests so I keep going back. I Get scared telling people to odin because so mant people soft brick while screwing up a flash inodin or hard brick because they flash a non Verizon rom
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
good point. saw where someone flashed an i9300 s3 rom on the verizon s3 and brick city. my problem with aokp, cm, liquid, carbon, baked bean, I've tried them all, is constant freezing forcing me to pull the battery. I love the features of those roms but I hate having to pull the battery all the time
Hmm, over the past couple days I've tried out a few different ROMs on my girlfriend's S3 here, and on each one I would get this "Could not connect to the camera" error, every single time upon opening the camera app. One of the Paranoid Android ROMs, Liquid Smooth, and Synergy (even the Touchwiz camera was broken on that!).
I can restore to the original backup I made of the stock ROM, and the camera works fine again. But as soon as I try a different ROM, no camera.
I'd love to get an AOSP ROM running on this phone, but having a working camera is a requirement, and I can't figure out what I'm doing wrong. Searching the individual threads for the ROMs yields little help, and I'm getting exactly the same error on different ROMS, so I feel like I'm doing something wrong on a higher level. Any chance that switching from TWRP to CWM would make a difference? I don't see why it would, but I suppose it's something I could try.
bbqsfire said:
If you flashed md3 just flash back mb1 and you will fix that problem. I had the issue. Pulled the firmware from invisiblek for mb1 and back to normal on liquid smooth
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Yep, I'm saying I tried that, still nothing :\ I'm going to flash MB1 and get the stock files again to see if it will do anything but I doubt it.
CZory91 said:
Yep, I'm saying I tried that, still nothing :\ I'm going to flash MB1 and get the stock files again to see if it will do anything but I doubt it.
Click to expand...
Click to collapse
Have you tried odin back to MB1 or even LK3 and letting it go through the OTA's? Those OTA's also update rpm, and other partitions, that as far as I know don't get updated when we flash these stock files on xda unless we flash them ourselves. Maybe something screwed up and is being persistent since those partitions aren't getting updated along the way?
Watanuki-Kun said:
Have you tried odin back to MB1 or even LK3 and letting it go through the OTA's? Those OTA's also update rpm, and other partitions, that as far as I know don't get updated when we flash these stock files on xda unless we flash them ourselves. Maybe something screwed up and is being persistent since those partitions aren't getting updated along the way?
Click to expand...
Click to collapse
I'm honestly just going to restart from scratch and re root when CM10.1 is fully done (hopefully soon...) Nothing is working. Flashed to MB1 firmware on CM 10. Tan MB1 CleanROM. Camera worked in CleanROM, copy/pasted onto my CM10 after the restore, still nothing... Seriously mind boggling.
CZory91 said:
I'm honestly just going to restart from scratch and re root when CM10.1 is fully done (hopefully soon...) Nothing is working. Flashed to MB1 firmware on CM 10. Tan MB1 CleanROM. Camera worked in CleanROM, copy/pasted onto my CM10 after the restore, still nothing... Seriously mind boggling.
Click to expand...
Click to collapse
Probably best, that would be my first thing to try if I had that problem, restarting from scratch. If all else fails, restarting from scratch will wipe out everything. If that failed, I would probably suspect hardware issue.
Watanuki-Kun said:
Have you tried odin back to MB1...
Click to expand...
Click to collapse
Flashing the MB1 firmware fixed the camera for me on AOSP. I flashed this zip in recovery after the ROM was installed:
http://invisiblek.org/sch-i535/firmware/
Link was obtained from here (FAQ about it):
http://rootzwiki.com/topic/34053-firmware-vrbmd3-modemrpmtzsbl-verizon-sgs3-sch-i535/
dandydon414 said:
good point. saw where someone flashed an i9300 s3 rom on the verizon s3 and brick city. my problem with aokp, cm, liquid, carbon, baked bean, I've tried them all, is constant freezing forcing me to pull the battery. I love the features of those roms but I hate having to pull the battery all the time
Click to expand...
Click to collapse
Well I would recommend liquid 2.5 with the kernel that comes with it and I never change any of the overclocking settings. I don't have to pull the battery at all on this one.
Sent from my SCH-I535 using xda premium
TunedReference said:
Flashing the MB1 firmware fixed the camera for me on AOSP. I flashed this zip in recovery after the ROM was installed:
http://invisiblek.org/sch-i535/firmware/
Link was obtained from here (FAQ about it):
http://rootzwiki.com/topic/34053-firmware-vrbmd3-modemrpmtzsbl-verizon-sgs3-sch-i535/
Click to expand...
Click to collapse
Yep, that's what I tried. Nothing.
Hey guys,
My HTC One 4.4.2 Kitkat Wifi, Bluetooth and FM radio no longer work and will not turn on and stay in "turning on" mode.
I woke up one morning without any changes and my phone just could no longer use Wifi. I did a complete wipe of everything OS etc and flashed a new rom Android Revolution HD and wifi still will not turn on. I cleared the catche etc when doing this and flashed the boot.img
Since my phone is rooted it's warranty will most likely be void so fingers crossed it's something i can fix. Just seems weird how it stopped working out of the blue like this.
I have searched but most people with this problem seem to have it once flashing a new rom.
iAMuSIK said:
Hey guys,
My HTC One 4.4.2 Kitkat Wifi, Bluetooth and FM radio no longer work and will not turn on and stay in "turning on" mode.
I woke up one morning without any changes and my phone just could no longer use Wifi. I did a complete wipe of everything OS etc and flashed a new rom Android Revolution HD and wifi still will not turn on. I cleared the catche etc when doing this and flashed the boot.img
Since my phone is rooted it's warranty will most likely be void so fingers crossed it's something i can fix. Just seems weird how it stopped working out of the blue like this.
I have searched but most people with this problem seem to have it once flashing a new rom.
Click to expand...
Click to collapse
You should flash your phone back to full stock e.g. by running a RUU. Whats your HTC One model (m7/m8 free/carrier branded) ???
Thanks
LS.xD said:
You should flash your phone back to full stock e.g. by running a RUU. Whats your HTC One model (m7/m8 free/carrier branded) ???
Click to expand...
Click to collapse
Cool will give this a try. My HTC is a M7 on Optus Australia network.
iAMuSIK said:
Cool will give this a try. My HTC is a M7 on Optus Australia network.
Click to expand...
Click to collapse
Seems as there is no matching RUU. But i have found a stock rom backup. Its flashable via CWM. --> LINK
Yea
Been struggling trying to find a stock RUU also. Will that RUU work using TWRP as i thought to flash a RUU you only had to enter into fastboot mode,
iAMuSIK said:
Been struggling trying to find a stock RUU also. Will that RUU work using TWRP as i thought to flash a RUU you only had to enter into fastboot mode,
Click to expand...
Click to collapse
Do you need the backup for twrp? I think its easiest to flash CWM and use the file from my link. I haven't found a twrp backup.
LS.xD said:
Do you need the backup for twrp? I think its easiest to flash CWM and use the file from my link. I haven't found a twrp backup.
Click to expand...
Click to collapse
So there is no Ruu for my phones carrier which does suck. Im not to sure on how Nandroid backups work either, will have to do some reading and find out,
iAMuSIK said:
So there is no Ruu for my phones carrier which does suck. Im not to sure on how Nandroid backups work either, will have to do some reading and find out,
Click to expand...
Click to collapse
Have you a working CWM installed yet?
LS.xD said:
Have you a working CWM installed yet?
Click to expand...
Click to collapse
Nope, can do that without much trouble though as i have found a tutorial on how to do so.
I have cwm installed instead of twrp now. Didn't realize how easy it was to flick back and forth between the 2 lol.
iAMuSIK said:
Hey guys,
My HTC One 4.4.2 Kitkat Wifi, Bluetooth and FM radio no longer work and will not turn on and stay in "turning on" mode.
I woke up one morning without any changes and my phone just could no longer use Wifi. I did a complete wipe of everything OS etc and flashed a new rom Android Revolution HD and wifi still will not turn on. I cleared the catche etc when doing this and flashed the boot.img
Since my phone is rooted it's warranty will most likely be void so fingers crossed it's something i can fix. Just seems weird how it stopped working out of the blue like this.
I have searched but most people with this problem seem to have it once flashing a new rom.
Click to expand...
Click to collapse
i think which rom you have flashed that doesn't support on your phone. you can try to flashed other rom of your divice.
I have a problem on my M8 that nobody seems to be able to solve. My M8 doesn't connect to 3G, only to 4G and 1x. This gets carried over from Rom to Rom. My SOD is running Viper and she connects to 3G no problem while I'm stuck with 1x.
I have posted multiple times about this but nobody seems to know whats going on.
Would going back to S-ON and Unroot possibly fix this problem? Would I need to revert my firmware.
I just don't know what to do.
I'm not the one to help you but I can say with confidence that turning s-on will only limit your options for fixing you problem.
mentallo said:
I have a problem on my M8 that nobody seems to be able to solve. My M8 doesn't connect to 3G, only to 4G and 1x. This gets carried over from Rom to Rom. My SOD is running Viper and she connects to 3G no problem while I'm stuck with 1x.
I have posted multiple times about this but nobody seems to know whats going on.
Would going back to S-ON and Unroot possibly fix this problem? Would I need to revert my firmware.
I just don't know what to do.
Click to expand...
Click to collapse
What ROM are you currently running ?
You may have to revert back to a stock ROM and then build back up. Before that I would wipe everything but your external card in recovery, flash the firmware twice with fastboot, and then flash the ROM.
Good luck.
mentallo said:
I have a problem on my M8 that nobody seems to be able to solve. My M8 doesn't connect to 3G, only to 4G and 1x. This gets carried over from Rom to Rom. My SOD is running Viper and she connects to 3G no problem while I'm stuck with 1x.
I have posted multiple times about this but nobody seems to know whats going on.
Would going back to S-ON and Unroot possibly fix this problem? Would I need to revert my firmware.
I just don't know what to do.
Click to expand...
Click to collapse
Have you tried using factory reset from hboot while on a stock recovery? Stock recovery resets parts used by the radio that custom recovery can't touch.
Have you also verified you have your network settings set to global and not lte only?
Whatever you do....do not turn s-on to trouble shoot this.
So I would need to unroot to use a stock recovery right?
mentallo said:
So I would need to unroot to use a stock recovery right?
Click to expand...
Click to collapse
No just flash the stock recovery just like you would a custom recovery. If you go to the android development section you should find the download for the stock recovery. Make sure to flash the correct one, such as the 4.4.4 stock recovery if your on the latest firmware or the stock recovery for 4.4.3 if your on that firmware and so on.
It never fails, every time I see somebody ask if they Should go back to S-On for any reason other than Warranty/returning phone, I cry a little on the inside..... ?
mentallo said:
I have a problem on my M8 that nobody seems to be able to solve. My M8 doesn't connect to 3G, only to 4G and 1x. This gets carried over from Rom to Rom. My SOD is running Viper and she connects to 3G no problem while I'm stuck with 1x.
I have posted multiple times about this but nobody seems to know whats going on.
Would going back to S-ON and Unroot possibly fix this problem? Would I need to revert my firmware.
I just don't know what to do.
Click to expand...
Click to collapse
Whatever you do, Don't go S-0n. It will only make your life more complicated.
What you need to do is run Dottat's FUU to make your whole thing stock.
Then do a factory re-set with stock recovery & kernel, and voila(!) your radios will be fixed.
Then put whatever rom you want on it.
Thanks for the help.
I recently flashed from stock to 5.01 and since then I get the "No Service" notification when I am in certain LTE coverage areas but the service bar shows 4G almost full bars.
My mobile data setting is set to Global, and if I am in the settings page the "Mobile Data" tab shows "disconnected"
I used a nandroid after a few days to get back to my previous ROM and still had the same problem. So I used an RUU to reflash 4.4.4 stock, still same issue.
I'm no expert but I'm not new to this either. I've rooted and flashed custom rom's since EVO 4G came out.
I know I'm missing something, I just don't have enough technical experience to figure this out.
Any thoughts would be greatly appreciated!
I'm in the same boat man. I flashed the 5.0.1, and I have not had LTE since. Just as lost as you are bud. Heres to finding a solution. :^)
I have found that since my post that sometimes if I turn airplane mode on for a minute, then back off I will get a connection, although not always and sometimes not for very long..
mojo82379 said:
I recently flashed from stock to 5.01 and since then I get the "No Service" notification when I am in certain LTE coverage areas but the service bar shows 4G almost full bars.
My mobile data setting is set to Global, and if I am in the settings page the "Mobile Data" tab shows "disconnected"
I used a nandroid after a few days to get back to my previous ROM and still had the same problem. So I used an RUU to reflash 4.4.4 stock, still same issue.
I'm no expert but I'm not new to this either. I've rooted and flashed custom rom's since EVO 4G came out.
I know I'm missing something, I just don't have enough technical experience to figure this out.
Any thoughts would be greatly appreciated!
Click to expand...
Click to collapse
just out of curiosity where did you get your 5.0.1 image from?
DH's 5.0.1 LolliGPE, I've used other works of his without issue?
Have any of you flashed stock recovery and selected factory reset from hboot?
dottat said:
Have any of you flashed stock recovery and selected factory reset from hboot?
Click to expand...
Click to collapse
I have not, and I should still be on stock recovery from the RUU.
Is that function any different in the hboot vs. a custom recovery like twrp? Sorry I am not doubting you, just want to understand more about what certain processes like this are doing.
THANKS
mojo82379 said:
I have not, and I should still be on stock recovery from the RUU.
Is that function any different in the hboot vs. a custom recovery like twrp? Sorry I am not doubting you, just want to understand more about what certain processes like this are doing.
THANKS
Click to expand...
Click to collapse
Stock recovery will set radio settings back to golden config while twrp will not.
dottat said:
Stock recovery will set radio settings back to golden config while twrp will not.
Click to expand...
Click to collapse
I will give it a go when I get off work tonight and let you know how it works out tomorrow.
The LTE area's I am having trouble with are on my commute so no Pandora makes for a quiet ride!
Thanks again!
any update on getting your LTE working. Same thing happened to me and i want my 4g. 3g just isnt the same.
I'm having major issues with reception in my house, and only on my 16 GB OnePlus One. When switching to my Windows Lumia 635 or my HTC One X+, I get fine reception-- but as soon as my SIM's in my OnePlus One, I start receiving texts extremely late, which is a problem with apps like WhatsApp which require text verification.
I'm running stock ROM. That's CM 12.0-YNG1TAS17L. Stock kernel, unrooted even (ever since I flashed it back to stock to try and fix the reception issues). I've also tried OxygenOS, BlissPop, and Exodus and none of those have fixed my reception woes. Thanks in advance!
toohsieh said:
I'm having major issues with reception in my house, and only on my 16 GB OnePlus One. When switching to my Windows Lumia 635 or my HTC One X+, I get fine reception-- but as soon as my SIM's in my OnePlus One, I start receiving texts extremely late, which is a problem with apps like WhatsApp which require text verification.
I'm running stock ROM. That's CM 12.0-YNG1TAS17L. Stock kernel, unrooted even (ever since I flashed it back to stock to try and fix the reception issues). I've also tried OxygenOS, BlissPop, and Exodus and none of those have fixed my reception woes. Thanks in advance!
Click to expand...
Click to collapse
You ever get this fixed? I recently took a trip to San Diego and noticed the poor reception there.. a friend of mine, who's also on T-Mobile, has excellent reception with his new HTC One. I, on the other hand, had horrible reception; sometimes none at all. I've manually flashed the latest radio and still no dice.
silentcovenant said:
You ever get this fixed? I recently took a trip to San Diego and noticed the poor reception there.. a friend of mine, who's also on T-Mobile, has excellent reception with his new HTC One. I, on the other hand, had horrible reception; sometimes none at all. I've manually flashed the latest radio and still no dice.
Click to expand...
Click to collapse
Yeah-- here's what I did:
1. Flash stock ROM.
2. Update to latest stock ROM version via the CM updater.
3. Install TWRP again if needed.
4. Followed steps here: http://forum.xda-developers.com/oneplus-one/help/fix-cm12-calls-sms-mms-deep-sleep-t3103193
I flashed both the modem and proximity packages after updating to latest stock, and I reflash every time there's a new stock update. Hopefully this works for you!
toohsieh said:
Yeah-- here's what I did:
1. Flash stock ROM.
2. Update to latest stock ROM version via the CM updater.
3. Install TWRP again if needed.
4. Followed steps here: http://forum.xda-developers.com/oneplus-one/help/fix-cm12-calls-sms-mms-deep-sleep-t3103193
I flashed both the modem and proximity packages after updating to latest stock, and I reflash every time there's a new stock update. Hopefully this works for you!
Click to expand...
Click to collapse
Wait, isn't the stock from still on 4.4 or something? How does that fix 5.0+ issues? Anyways, I'll give it a try, can't hurt, right? Thanks, I'll let you know how it goes.
silentcovenant said:
Wait, isn't the stock from still on 4.4 or something? How does that fix 5.0+ issues? Anyways, I'll give it a try, can't hurt, right? Thanks, I'll let you know how it goes.
Click to expand...
Click to collapse
Well, stock is 4.4, but when you use the stock CM updater you'll be brought to CM12, 5.0.2. You don't have to stay on 4.4
silentcovenant said:
Wait, isn't the stock from still on 4.4 or something? How does that fix 5.0+ issues? Anyways, I'll give it a try, can't hurt, right? Thanks, I'll let you know how it goes.
Click to expand...
Click to collapse
(Though presumably you could just try flashing modem and prox packages without flashing back to stock-- I just wanted to be sure as possible that nothing would interfere with the packages.)
toohsieh said:
(Though presumably you could just try flashing modem and prox packages without flashing back to stock-- I just wanted to be sure as possible that nothing would interfere with the packages.)
Click to expand...
Click to collapse
Flashed an old backup of stock, baseband stayed the same. Also, when I check for ROM updates, it says there are none. Currently on 4.4.4
silentcovenant said:
Flashed an old backup of stock, baseband stayed the same. Also, when I check for ROM updates, it says there are none. Currently on 4.4.4
Click to expand...
Click to collapse
That's really odd. You're on XNPH05Q? Or another one?
I used http://www.droidviews.com/restore-oneplus-one-stock/ to restore to stock instead of using a backup.
toohsieh said:
That's really odd. You're on XNPH05Q? Or another one?
I used http://www.droidviews.com/restore-oneplus-one-stock/ to restore to stock instead of using a backup.
Click to expand...
Click to collapse
The stock version they gave me was: XNF9XBS28K
silentcovenant said:
The stock version they gave me was: XNF9XBS28K
Click to expand...
Click to collapse
I can't say I've ever seen that version before but it looks like someone else had the same issue: https://forums.oneplus.net/threads/xnf9xbs28k-ota-updates.315441/