Related
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
Download and install Windows mobile device center
ducbinh.vn said:
Download and install Windows mobile device center
Click to expand...
Click to collapse
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
CAPHI said:
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
Click to expand...
Click to collapse
When i used xp mode i found that in order to have a successful flash you must hard reset your phone before you flash, mount the device with the RUU running from the desktop, and once the RUU begins you must remount your device once it gos into the boot screen(it shows up as unidentified...but its the one highest up in the list)then your device will do its thing and then you magically have a new ROM! Hope this helps, and yes obviously Windows XP is a better solution but the thread is updating a ROM on Windows 7...
OK, i got it... im downgrading my PC to Windows XP SP3...
Thanks guys
no need to downgrade OS, use vmware to install XP inside it
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
hi download windows mobile device center 6.1 from ms i have it much better then active syn no need to load xp or anything so the member thats said its incorrect is wrong
grtz cyber weesje
BASSMANBOB said:
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Click to expand...
Click to collapse
he is right your incorrect windows mobile device center 6.1 no need to downgrade or load the xp virtual unit for that i use it daily and many ohters active syn is old ms even stopt working on it
grtz weesje
tljubas said:
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
Click to expand...
Click to collapse
When your Wizard is starting up, there comes a screen with in the left up corner some info like CID etc. When your Wizard is CID unlocked, then there behind CID x.xx.olip.
I know that it works with a g4 version of the wizard. Look around for more info
Edit: This is only when you succesfully installed Hardspl
I just flashed a rom on my p3300 yesterday and I did it on Windows 7 ultimate.. For me it was working just like that..
Today I will try my fathers Wizard on it
**edit**
No luck on Windows 7 installing WM6.5 on the wizard..
I installed XP on VMware and that worked for me..
Used activesync 4.5 on it.. Installed the CR96 WM6.5 of Cracing
Works like a charm!!
So yeah... Install VMware, that will be the best way to flash your Wizard.
Holla!
hi, after a year of trying custom roms i learned that the most suitable rom is the stock rom after uninstalling bloatware and system apps u dont use
and i learned that the reason that message usb not recognized appers after connecting ur phone to pc in doanload mode is that you are runnig a windows other than windows 7.
download mode works only on windows 7 ( with experience )
so , to be sure , i advice to install samsung kies from official site , install it and make sure to check install mobile drivers and then restart pc
ahmedteling said:
hi, after a year of trying custom roms i learned that the most suitable rom is the stock rom after uninstalling bloatware and system apps u dont use
and i learned that the reason that message usb not recognized appers after connecting ur phone to pc in doanload mode is that you are runnig a windows other than windows 7.
download mode works only on windows 7 ( with experience )
so , to be sure , i advice to install samsung kies from official site , install it and make sure to check install mobile drivers and then restart pc
Click to expand...
Click to collapse
You do realize none of this is true?
In MY experience, Download mode works with every windows! I have personally tried XP, 7, 8 and 8.1. Sir, you'r argument is false and invalid... Reported...
Reason for reporting: Post contains non-useful and false information that is misleading and simply wrong and might end up being harmful as Kies is not only incompatible with legacy devices but also known to be harmful, proved by a large number of devices being soft bricked, thank you.
AXAz0r said:
You do realize none of this is true?
In MY experience, Download mode works with every windows! I have personally tried XP, 7, 8 and 8.1. Sir, you'r argument is false and invalid... Reported...
Reason for reporting: Post contains non-useful and false information that is misleading and simply wrong and might end up being harmful as Kies is not only incompatible with legacy devices but also known to be harmful, proved by a large number of devices being soft bricked, thank you.
Click to expand...
Click to collapse
i have win 8 i raped the internet to make download works but no luck , till last week i tryed with my sister win7 laptop and it works
ahmedteling said:
i have win 8 i raped the internet to make download works but no luck , till last week i tryed with my sister win7 laptop and it works
Click to expand...
Click to collapse
See proof screenshots in attachments.
Fun fact. I didn't download Kies, i didn't download any drivers, i didn't use any tricks. All i did is this:
1. Run ODIN 4.42
2. Boot in Download Mode
3. Plug in USB
Oh! Right! Also, you might want to enable automatic updates in your system... you know, so windows can automatically install the drivers?
And thats it...
galaxy fit did not shows on windows 8.1
u can see the screen short
sudhanshu2099 said:
u can see the screen short
Click to expand...
Click to collapse
install samsung usb mobile driver download from google
i solved the problem by using windows 7 , i were using windows 8
Sent from my Lenovo A516 using Tapatalk
So my razr is softbricked. I have been reading the forums here for the last 4 days, probably around 10 hours+ reading for solution. Anyways, my phone refuses to turn on and it pulls up the "downgraded security version" on the fastboot screen. Now, adb recognizes my phone in fastboot mode, and I tried flashing back the stock firmware (I had it updated to 9.30 locked bootloader) to no luck. I read that RSDlite is the way to go, but it refuses to recognize my phone. I have updated the drivers close to 9 times already, and I honestly doubt that's the issue, as adb can recognize my phone just fine. Under configuration/Flash Modes there's an option for fastboot, which is greyed out and unclick-able. Is there something I could do to get it to recognize my phone? I'm not ready to give up on it just yet.
I figured the reason RSDlite wasn't working. For those who are experiencing similar issues with RSDlite not recognizing your device, I can confirm that it does not work with windows 8.1. You will have to run it in windows 7, or else it will not recognize your device.
When you say windows 7, do you mean a true physical win 7 machine, or windows 8.1 with rsdlite being executed in win 7 compatibility mode? I can't get rsdlite to work on my laptop as well and have no other machine..
Sent from my RAZR HD using Tapatalk
I have another old desktop running windows 7. I tried it there and it was able to recognize my razr in fastboot. My laptop runs windows 8.1, and no matter what I did, rsdlite didn't recognize my razr. I think rsdlite just doesn't support 8.1 yet.
Thanks for the clarification, although it was not the answer I was hoping to hear
I honestly would switch my laptop to windows 7, if i didn't have to pay the 100$ for the OS. I still can't seem to adapt to windows 8. I don't like the answer any more than you do, I messed around with the settings enough to give up. Hopefully they might make a patch in the near future to allow it to work on windows 8.1.
Needs to be USB2.0 and you need to use the original moto cable.....generally it does matter
I used a USB 2.0 port on my laptop and desktop, same sync cable on both. If the cable was the only thing stopping it in windows 8.1, then I'm sure it would had been the same in windows 7. However, I was fully able to use RSDlite on my windows 7 desktop without any issues.
cmh714 said:
Needs to be USB2.0 and you need to use the original moto cable.....generally it does matter
Click to expand...
Click to collapse
unfortunately I don't even have a USB2.0 port anymore on my ultrabook.. ah well, who needs RSDLite anyway, but still weird that it doesn't work.
Virtualize a W7 Os
Yeah, my RSD Lite doesn't recgonizde mi device, just in w7. You guys could install a virtual machine program like VM Ware or Virtual Box and Install the drivers, RSD Lite and the desired Firmware.
Hi,
The title pretty much sums it all, it won't connect at all. Driver or no driver, oem cable or not and stock rom or not. Can't even ADB in...
But ! It does work on my laptop (without drivers), so it's not a faulty device.
Anyone have any idea ?
*Edit: Both my laptop and desktop computers are running Win 8.1
dw4 said:
Hi,
The title pretty much sums it all, it won't connect at all. Driver or no driver, oem cable or not and stock rom or not. Can't even ADB in...
But ! It does work on my laptop (without drivers), so it's not a faulty device.
Anyone have any idea ?
*Edit: Both my laptop and desktop computers are running Win 8.1
Click to expand...
Click to collapse
It's the fingerprint security blocking access to the S6's data, you have to unlock screen on the S6 and your Windows will see the drive
vegetaleb said:
It's the fingerprint security blocking access to the S6's data, you have to unlock screen on the S6 and your Windows will see the drive
Click to expand...
Click to collapse
Thanks mate, but i already tried with screen unlocked. It might be a little more serious than that.
Remove all samsung drivers from control panel, then re install.
blud7 said:
Remove all samsung drivers from control panel, then re install.
Click to expand...
Click to collapse
Thanks again bro, but i already tried that.
SmartSwitch for PC has a RE-install device drivers option.
try running that.
kimkara said:
SmartSwitch for PC has a RE-install device drivers option.
try running that.
Click to expand...
Click to collapse
Okayyyyyyyy, i figured it out... So i was trying your method, installing SmartSwitch, and it wouldn't install because i didn't have the "Media Feature Pack". Because i'am running Windows 8.1 N on my desktop pc.
So i installed that media bull**** pack and then !!!! Miracle, it worked ! Didn't even need smartswitch. And if you are asking yourselves why is it working on my laptop, well the answer is very simple. My laptop is running a standard version of Windows 8.1... It actually make perfect sense the S6 only connects in PTP or MTP, which are both multimedia "modes". And i still can't adb into the device, must be coming from somethings else !
Anyway thanks to everyone for your help !
dw4 said:
Okayyyyyyyy, i figured it out... So i was trying your method, installing SmartSwitch, and it wouldn't install because i didn't have the "Media Feature Pack". Because i'am running Windows 8.1 N on my desktop pc.
So i installed that media bull**** pack and then !!!! Miracle, it worked ! Didn't even need smartswitch. And if you are asking yourselves why is it working on my laptop, well the answer is very simple. My laptop is running a standard version of Windows 8.1... It actually make perfect sense the S6 only connects in PTP or MTP, which are both multimedia "modes". And i still can't adb into the device, must be coming from somethings else !
Anyway thanks to everyone for your help !
Click to expand...
Click to collapse
good to know, glad you got it working.
HI guys. I recently needed to reformat my 2HIX WINTAB, I installed a brand new windows 10, and without any kind of support on the controllers from the vendor, i managed to get everthing installed, even the touchscreen... The problem here is that i´ve installed various drivers with the same Hardware ID and each one of them gives me diferent calibration problems and i can't manage to get the correct one.
Is ther anyone with a solution for the touch, or even better, a stock ISO with windows 10? All the help you can give me is welcome :good:
Same here. Used the windows install pendrive to install windows fresh and cleared up. Installed Windows and did not install any device.
No driver support anywhere.
Been playing it for a 1/4 of a day.
It seems we can use drivers from other makers.
I had a toshiba wt7-c and it kinda uses same hardware.
So what we need is the intel platform installer for windows 8.1 and it should install drivers for almost everything and show the hidden devices. Strangely windows 10 didnt download any drivers as far i could see through windows update.
I have the same problem... any solution so far? thanks in advance
Hello Sir,
Yesterday I had the same problem, no touch screen and no sound after clean install of windows 10 in that tablet, 2hix... did you managed a solution? Will you please share? Thanks!
Also, do you still have android running? i lost mine.
(2hix tablet was dual boot from factory with win10/android 4)
Thanks again,
Pluda