Absolutely loving this rom, but does anyone know if there are bluetooth issues with the current Cyanogenmod builds? Got a wear device for christmas, and it's battery life is about half what it should be. I've seen it reported on other devices running CM because of a problem with the Bluetooth drivers. Really trying to avoid switching back. Thoughts?
Can you please specify which device and what Wear Device are you referring to ?
Related
Recently I installed CyanogenMod 11.0 M1 onto my Nexus 5. Since then charging the phone has become extremely slow, can anyone suggest any fixes for this issue?
Try going back to stock. It may be an issue with CM....in fact, I'd bet it's an issue with CM
So I just switched to a Nexus 5 from a Galaxy S4.... loved the phone until I connected it to my Tundra OEM bluetooth system. Hard to pinpoint an exact problem, it just doesn't work right. Randomly disconnects, etc. I had zero issues with bluetooth with my GS4. Is there some fix I should be aware of? i should mention that I rooted the phone right off the bat and am running Cyanogenmod Nightly.
Try it on stock to see if you have issues. It's most likely a rom issue
Sent from my Nexus 5
I've had a similar problem on stock rom with stock, chaos, franco and arkenstone kernels so I don't think the rom or kernel is the root of the problem. It will arbitrarily not connect, it will connect but when a call comes in won't automatically go to bluetooth but go to the handset etc.
I had hoped it was fixed somehow but happened again today out of the blue. It also comes with excessive bluesleep wakelocks that impact my battery life significantly (goes from draining at .7%/hr to ~3%/hr).
Okay so I was on the M8 for about a year being a crack flasher and never having my phone set up quite the way I like it. I then switched to this phone and am loving it except the bluetooth. When I got it, I updated to 05Q before trying to connect to my car's bluetooth. I then had a lot of problems with bluetooth connecting, It would take forever to auto connect, music would skip and my phone would randomly disconnect. I did some reading and discovered it may be an issue with the update so I used the tool kit to downgrade to 44S. While less often, the issues are still very much present. I've been tempted to try CM12 but need something relatively stable. That being said, the 11s doesn't seem to be very stable itself, and I'm curious is bluetooth is better in the cm12 nightlies. I've done some research and I see references here to issues and then fixes and I'm not sure where things have landed at this point. Looking for some input on whether things would improve if I switched to the nightlies. Forgot to mention on my M8 bluetooth in my car worked flawlessly.
I have my phone paired to my Pioneer head unit and if it disconnects it will occasionally cause the Bluetooth to turn on and off continuously without warning or anyway to stop the cycle. The only way I found to resolve the issue was a factory reset. I just reset my phone yesterday and the same thing happened today when I tried to re-pair to it again after I left my car. As you can imagine, this is extremely annoying, I am hoping someone can provide some insight on a possible fix for this.
Blu Pure XL
Stock ROM
Android Lollipop
SWV: BLU_P0010UU_V16_Generic_5.1_15-03-2016
I've experienced the same thing with my BLU Pure XL. It doesn't look like anyone has responded; likely because there isn't a fix and the phone is so substandard. Bluetooth is weak; signal strength is pathetic, cheap glass, lacks friendly ergonomics. I could go on. I've tried to submit issues through BLU website - no response. I won't give them another chance. Likely will buy the new Plus 1. Good luck and if you find a fix please post it here.
WilsonBridge said:
I've experienced the same thing with my BLU Pure XL. It doesn't look like anyone has responded; likely because there isn't a fix and the phone is so substandard. Bluetooth is weak; signal strength is pathetic, cheap glass, lacks friendly ergonomics. I could go on. I've tried to submit issues through BLU website - no response. I won't give them another chance. Likely will buy the new Plus 1. Good luck and if you find a fix please post it here.
Click to expand...
Click to collapse
So I noticed the Bluetooth issue only occurs for me when I am connected to a bluetooth device and a specific sequence of events occurs to cause it to happen. Specifically something like my vehicles aftermarket Pioneer radio where I can wipe the bluetooth memory of it (it has a 3 device limit). If, I wipe the bluetooth memory of my radio while my phone is connected, it will cause it to go into a loop and thus require a factory reset to resolve the issue. Since I discovered this, I have wiped the memory while the phone is disconnected and the issue does not occur. It has been quite sometime since I have originally posted here and I haven't had a problem since I have monitored it. Please let me know if this seems to be the same thing that occurred for you as well. Cheers
right now I have been using G4 for a long time.
And many problems start to appear on my phone.
I have got Bluetooth lagging, so sometimes disconnected with my earbud.
I have got no internet on 5G wifi, but 2.4G wifi works fine.
I have overheating problem and battery draining problem.
I want to know what I can do to fix or reduce the problem. Please don't tell me to buy a new one. I know it can be a solution.
Another problem is it only get Android 6.0 and I have att version but I am on Tmobile network.
I also want to know if any 3rd party Rom provides have a 7.0 or 8.0 for that?
Any suggestion can help.
If no way to fix or improve, I will look for a new one.
kevinzhang0528 said:
right now I have been using G4 for a long time.
And many problems start to appear on my phone.
I have got Bluetooth lagging, so sometimes disconnected with my earbud.
I have got no internet on 5G wifi, but 2.4G wifi works fine.
I have overheating problem and battery draining problem.
I want to know what I can do to fix or reduce the problem. Please don't tell me to buy a new one. I know it can be a solution.
Another problem is it only get Android 6.0 and I have att version but I am on Tmobile network.
I also want to know if any 3rd party Rom provides have a 7.0 or 8.0 for that?
Any suggestion can help.
If no way to fix or improve, I will look for a new one.
Click to expand...
Click to collapse
If you google LG g4 boot loops it’s all a common issue. There are fixes like baking it in the oven, taking it apart and redoing to heat sink or whatever. But only actual fix is replace the phone. The G4 is common for hardware failure. Just make sure you backup everything as it wouldn’t be a surprise when it bootloops, usually there’s no bad signs before bootloop but can still happen especially since your having hardware problems.
You’ll need an AT&T sim to update the device. Sorry can’t answer on custom Roms though.
Sent from my iPhone using Tapatalk