[Completed] Bricked moto g - XDA Assist

Somehow i managed to fully reset my device leaving no os and my device stuck in a ' unlocked bootloader' bootloop. I opened up twrp and tried to push a rom through adb to my phone but when installing the rom it failed to mount/data etc. I was told i could sideload a rom via twrp to my phone and after this was done it asked to reboot the device and now i am stuck in a bootloop of the teamwin logo! If anyone could provide me with support tonight id be extremely greatful.

Hi,
Your best option would be restoring the stock firmware. Here's a guide on that. Read the first post carefully and ask any questions here,
http://forum.xda-developers.com/showthread.php?t=2542219
2013 model I assumed?
Good luck!

Related

[Completed] [q] xperia s stuck in bootloop after twrp installation

the title says it all. i first rooted my xperia s and unlocked the bootloader. it was all well and my phone was working although all contacts,music and pictures were wiped. luckily, i had done a backup of those. i went on and installed twrp 2.4 to make a backup of the rom. my plan was to install cynogen 11 after this . but now after installing twrp i am stuck at bootloop, but i can enter twrp by holding down volume button. please tell me how to fix the bootloop error.
Hi,
Asking for help in the twrp thread you downloaded the recovery from would be your best option.
Good luck!

[q] moto g | boot loop and can't access recovery and adb not working

Hi, My moto g (XT1032) was previously running Lollipop 5.02 with a custom kernel. Also using TWRP.
I was trying out a new kernel and rom, I backed up my phone before I did all this so I went ahead and tried to install CM12 this failed so I recovered from the back up and now I am stuck in a bootloop and can not access recovery.
As soon as I try to access recovery the TWRP splash screen appears but then boots normally!!
ADB is not recognising the device whether I use Moto adb drivers or universal ones!
Really need help, would greatly be appreciated!
(Just trying fast boot, will update if no success)
Liam
Amateur developer (tinkering with kernels )
I think you ****ed up
ADB commands only work in recovery or when the phone has fully booted the OS.
Have you tried to flash your phone's stock 4.4.4 ROM? Do not flash anything older.

[Completed] is my phone bricked?

so. i updated my phone from cm 12 to cm 13 and
i got into twrp recovery and installed the the downloaded file.
now the phone is in bootloop. i tried to flash twrp recovery again. but it says mismatched partition size(recovery).
if i get into fastboot and select recovery, i get the teamwin logo and thr phone goes into the bootloop again. same thing happens even if i factory reset it(through fastboot)
please help me
thanks
Hello,
Welcome to XDA.
To further assist you, please post your device model number and I will guide you to where you may find your answers. Thank you.
Register an XDA account to post and reply in the forums.

[Completed] problem came on installing stock and custom recovery

I have Lenovo A6000 and I have installed stock recovery by minimal adb and fast boot software .
In the bootloader sceen I have successfull flashed stock recovery (not corrupted because installed it before and was working ) but while rebooting to recovery menu it stuck on boot loop,
then I have installed TWRP recovery image successfully by Minimal ADB fastboot, and same result came.
So I have decided to install stock rom by fastboot software from bootloader .
After wiping data by below command
fastboot -w
followed by
fastboot update <stock.zip>
An errom came and says no android-info.txt found.
What it is???
Please give us a way to install Stock ROM because no recovery is working.
Hi,
Thanks for using XDA assist.
I found a helpful thread that may help you solve your problem:
The Long Waiting Lollipop For Lenovo A6000 / Plus
If you follow the guide, you may be able to access your recovery.
Alternatively, you can post in the Android Q&A, Help & Troubleshooting forum as there is no dedicated thread for your device. Please note that in order to post, you will need to create a XDA account.
Good Luck! - gsstudios

[Completed] Lenovo a526 stuck at "lenovo" logo

Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Hi mr__gutz
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
mr__gutz said:
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Click to expand...
Click to collapse

Categories

Resources