i was trying root and install custom rom on razr hd then before i try to update it by rsd lite but unfortunately i flash xt907 firmware the rsd lite flash it and reboots it but after reboots it stuck and dead unreponsive no disply no power vol buttons working not even connect with charger working no led notification light i dont understand the software can brick harware plz help what should i do to make it alive
abifahad said:
i was trying root and install custom rom on razr hd then before i try to update it by rsd lite but unfortunately i flash xt907 firmware the rsd lite flash it and reboots it but after reboots it stuck and dead unreponsive no disply no power vol buttons working not even connect with charger working no led notification light i dont understand the software can brick harware plz help what should i do to make it alive
Click to expand...
Click to collapse
I believe you are dead in the water. There is no way to bring it back. Once you flashed the incorrect image, you pretty much trashed the phone. It's unfortunate, but other's have done this and have not been able to recover from it.
And, it's not software you flashed. Like you said, you flashed firmware. That is different from software and flashing the incorrect firmware WILL permanently brick your phone. Flashing the incorrect firmware means you've overwritten the logic in your motherboard with logic that doesn't work with your phone, including having the ability to flash back. Once that is trashed, it doesn't know how to communicate anymore.
This is why you really need to make absolutely sure you have the correct image for your phone and if you are unsure of something, ask before doing anything or else, this is the result.
Now is their any solution i mean do it require to chnge inside IC or to reset the logic to factory is their any software or hardwear solution
abifahad said:
Now is their any solution i mean do it require to chnge inside IC or to reset the logic to factory is their any software or hardwear solution
Click to expand...
Click to collapse
As I stated, the phone is dead. There is no getting it to function again. I don't know how much clearer I could have been in my previous post.
Basically, you have to swap out the motherboard. But, I don't know if that's something you can do. You could take it to a repair shop and see what they say, but there's nothing you can do any more. The phone is fubared.
Sent from my Nexus 7 using Tapatalk
Can be used or parts which i need
sorry dude, Ibolski is right
Related
Maybe i'm posting in the wrong section but here's the thing.
Okay so I tried searching everywhere for a solution and I didn't find anything.
So this is what happened, I was on ICS leak 4.0.4 ICS.672.1.13.en.03 then I tried to Fxz to AT&T 2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip and it got stuck at 5/20 saying "Rebooting bootloader" the screen stayed black for a long time, so I clicked close and this is where all this happened. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything. I don't know anymore what to do, I bought this overseas so I have no warranty and it's not an AT&T phone. If anyone went through this, I really don't know what to do.. I know it's not softbrick as I can see it. I'll be very thankful if there is a solution, but my hopes are really down..
I know I read all the guides, it said "Don't pull battery or unplug. So I didn't unplug or remove battery, I just clicked close. I really didn't know this could happend. Didn't see it in any thread or post that you can't Fxz from 4.0.4 to AT&T 2.3.5
darkmixta said:
. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything.
Click to expand...
Click to collapse
what phone model /where did you get that zipped rom from/ do you have a stock rom ?
If you start phone and screen is black ( no bootloader image) then it's possible to be really bricked
ruscan.calin said:
what phone model /where did you get that zipped rom from/ do you have a stock rom ?
If you start phone and screen is black ( no bootloader image) then it's possible to be really bricked
Click to expand...
Click to collapse
I got an Atrix 2 and I was on ICS leak 4.0.4, I tried to Fxz to this InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip which I found at this site http://sbf.droid-developers.org/edison/list.php. I have locked bootloader. Btw it got stuck at 5/21 "rebooting bootloader" with a black screen after that nothing worked for me, before I tried it I had 90% of battery.
darkmixta said:
I got an Atrix 2 and I was on ICS leak 4.0.4, I tried to Fxz to this InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip which I found at this site http://sbf.droid-developers.org/edison/list.php. I have locked bootloader. Btw it got stuck at 5/20 "rebooting bootloader".
Click to expand...
Click to collapse
never flash a rom without instructions if you are not an experienced user you have to use RSD Lite to get back to working conditions
ruscan.calin said:
never flash a rom without instructions if you are not an experienced user you have to use RSD Lite to get back to working conditions
Click to expand...
Click to collapse
But I was told that if you have a locked bootloader it's really hard to hard brick your phone.
darkmixta said:
But I was told that if you have a locked bootloader it's really hard to hard brick your phone.
Click to expand...
Click to collapse
pull out battery then back and try to boot/recovery/fastboot or flash a rom by RSD Lite
also read here
ruscan.calin said:
pull out battery then back and try to boot/recovery/fastboot or flash a rom by RSD Lite
also read here
Click to expand...
Click to collapse
I tried booting into fastboot, but the phone even turn on. Only white led when I plug it without battery into my laptop. So it isnt really dead but something is wrong, I tried the invisible boot, but I guess it isnt working.
But anything that may change the state would be a huge help if you have a thought?
All I have right now is a quick LED and battery charge signal for a second then gone.
I can't get into download or recovery mode or power on.
I switched CWM versions (after a nandroid and attempting to reinstall the previous CWM would error) and then tried to flash cm10.
I went into bootloop and tried to pull the battery since i couldnt force it to recovery so i could restore factory but nothing now.
Again, I think i screwed myself, but if you can save me money I'd appreciate any thoughts.
dont know how to help man. unless you know how to jtag, it sounds like you are hard bricked. by the way, you do know that cm10 is SUPPOSED to bootloop for a few minutes on every boot right? or maybe your battery was really low during flash, or maybe you got a bad md5 sum for your download? more info on what you did to make this happed would make it easier to help you.
Make sure your doing the right combination for download mode. Volume down home button and power.
Sent from my SCH-I535 using Tapatalk 2
Stryker1297 said:
dont know how to help man. unless you know how to jtag, it sounds like you are hard bricked. by the way, you do know that cm10 is SUPPOSED to bootloop for a few minutes on every boot right? or maybe your battery was really low during flash, or maybe you got a bad md5 sum for your download? more info on what you did to make this happed would make it easier to help you.
Click to expand...
Click to collapse
yeah. it rebooted over a dozen times.
im not sure if when i updated CWM to touch and a newer version if for whatever reason it didnt recognize the nandroid from an hour earlier.
but that doesnt really make sense.
i have to think i did something wrong with the recovery img
so now there is no response to any of the hardware buttons.
crap. and thanks.
How about listing the steps on what you did to get where you are now.?
I've had somewhat similar problem. Mine turned out to be dead battery and phone wouldn't charge. I ended up charging battery on buddies phone, which allowed phone to boot. Then I wiped everything and started from scratch. Everything returned to normal
Hi, I am new at this forum and i would like to ask you the following question.
recently i bought a samsung galaxy ace 2 phone and today i decided to try a custom ROM with, being a Linux geek for years...
So i chose Kyrillos Rom for my phone and after several failures i got to understand that before i try to load the custom ROM i had to upgrade my firmware and kernel as described here :http://forum.xda-developers.com/showthread.php?t=1955679
So i used Odin tool , and tried to flash the new firmware as described here :http://forum.xda-developers.com/showthread.php?t=2118119,before proceeding to kernel flash.
Everything went smooth , Odin showed 'pass' indication and my phone after the procedure tried to reboot...and never woke up...
From then i cannot boot my phone at all, i mean neither in usual mode by pressing the power button nor in recovery or download mode. It does not respond to any of those, the screen and the buttons are completely black no matter how many seconds i press them
When i started the procedure my battery level was at 70% and just to be sure i connected it to USB port so as not to empty the battery during the procedure..Now that i connected it to its' charger it does not show the charging indicator
Any ideas as to what happened and how i can fix my problem?
Thank you in advance and keep up the good job!!!
seems motherboard is dead u need to get it replaced anyway did u follow the odin guide carefully cause it seems not
Blackwolf10 said:
seems motherboard is dead u need to get it replaced anyway did u follow the odin guide carefully cause it seems not
Click to expand...
Click to collapse
It seems that i followed the exact directions in the posts mentioned, but my phone is I8160P and not I8160 something that i had not noticed up until tonight,so i think that it has something to do with this, even though i cannot understand how my motherboard died because of the firmware upgrade even thw firmware is made for another model...
VisagenNoir said:
It seems that i followed the exact directions in the posts mentioned, but my phone is I8160P and not I8160 something that i had not noticed up until tonight,so i think that it has something to do with this, even though i cannot understand how my motherboard died because of the firmware upgrade even thw firmware is made for another model...
Click to expand...
Click to collapse
it does have everything to do with that but it seems more like a hardbrick to me so does the phone charge or have u tried a lot of times to boot it or maybe pull the battery out for 5 min then put it back in and try to go to recovery or download if none of these stuff work then i think its dead
Blackwolf10 said:
it does have everything to do with that but it seems more like a hardbrick to me so does the phone charge or have u tried a lot of times to boot it or maybe pull the battery out for 5 min then put it back in and try to go to recovery or download if none of these stuff work then i think its dead
Click to expand...
Click to collapse
Yes i tried both normal boot pressing the power button and recovery - download modes and it did not power on in any of those cases. Also i tried pulling out the battery for 5 - 10 minutes and it did not power on afterwards either.Is this something that happens often because it seems really strange to me. If it has nothing to do with the firmware upgrade and it is a hardware issue then ok, i can sent it to repair it but if i have already lost the warranty due to root and firmware - custom recovery etc.. then what exactly do i have to do..
VisagenNoir said:
Yes i tried both normal boot pressing the power button and recovery - download modes and it did not power on in any of those cases. Also i tried pulling out the battery for 5 - 10 minutes and it did not power on afterwards either.Is this something that happens often because it seems really strange to me. If it has nothing to do with the firmware upgrade and it is a hardware issue then ok, i can sent it to repair it but if i have already lost the warranty due to root and firmware - custom recovery etc.. them what exactly to i have to do..
Click to expand...
Click to collapse
i don't think they will know since the phone won't boot up at all they know by going to download so give it a try and take it to a service and if ur in europe rooting does not affect ur warranty hope this helps
I combined some more things because I didnt want to spam section with thread for every thing
1. Backlight on hardware buttons is "shaky" Im afraid they will die. any idea why is that happening?
2. Everytime I start up my phone between LG silver logo and boot animation there is something like a white noise sometimes its green and red and sometimes when I flash in recovery and reboot it even shows 4 small pictures of recovery next to each other in weird colors. I will take picutre of it l8r.
3. Sometimes Phone just dies while Im using it. Randomly it just goes black and turns off not even a boot animation like i said it dies. On ics roms it happened sometimes now I on jellybam. After flashing pureaudio and pureperformance mod I decided to uninstall pureperf through flashable zip in thread. The installation was aborted I dont have idea why . after trying to uninstall pureperf unsuccesfully it happens often but (im not sure about this) only when listening to music or only when phone isn't charger . I don't know which one is problem.
please help my phone is going crazy and I dont have idea why :/
1. Could be a loose connection inside the phone. Or maybe some software conflict.
2. No idea, but see 3.
3. No idea except maybe you have too many mods and some do not agree.
It is always good to take a Nandroid backup before installing anything in recovery. If you have a backup from before the mods you could restore it and see what happens. Your firmware and bootloader need to be compatible with the ROM you restore (like if you have wkpark bootloader, and you try to restore a backup that had stock bootloader, you will get a security error, if I remember correctly).
drastic00 said:
1. Could be a loose connection inside the phone. Or maybe some software conflict.
2. No idea, but see 3.
3. No idea except maybe you have too many mods and some do not agree.
It is always good to take a Nandroid backup before installing anything in recovery. If you have a backup from before the mods you could restore it and see what happens. Your firmware and bootloader need to be compatible with the ROM you restore (like if you have wkpark bootloader, and you try to restore a backup that had stock bootloader, you will get a security error, if I remember correctly).
Click to expand...
Click to collapse
Im on Jellybam 4.2.2 wkparks bootloader and pureperformance and pureaudio are only mods I flashed and i flashed jb videorecord fix and arc+libs CM10. Do I need any special tools to fix loosr connection? . i found out that phone dies only when on battery so phone just ends signal with battery or other way but I think phone has to do with it because before flashing those two mods that did not happen. And about the startup. Could I jam some chip inside somehow? That weird screen is showing up for a long time it started when VR3D came out. (But I wasnt using vr3d at the time)
Also didn't you have any of these issues? You have supercharger and this mod has it integrated too
Edit: when listening to music it happens too . i turn om music it goes for 5 seconds and phone dies. When i try to reboot phone dies during booting only boots up when I put phone in charger. If phone is in charger music works fine. Pure mods and battery somehow don't work together . I would wipe them but they are so damn good
Sent from my LG-P920 using xda app-developers app
I dont understand how can software f*** up hardware like that. I did wipe flashed xbsalls v28b prerooted through lg flash tool. After that phone still randomly dies and after reboot battery showd 1% of battery left. Help me dude please is it faulty hardware?
Sent from my LG-P920 using xda app-developers app
The software runs the hardware so if there is a software issue, hardware could function incorrectly
It could be hardware since the problem carried over to another ROM. The digitizer should plug into the motherboard by a cable. You could make sure it is seated all the way.
drastic00 said:
The software runs the hardware so if there is a software issue, hardware could function incorrectly
It could be hardware since the problem carried over to another ROM. The digitizer should plug into the motherboard by a cable. You could make sure it is seated all the way.
Click to expand...
Click to collapse
Why digitizer? Digitizer works properly
Sent from my LG-P920 using xda app-developers app
I mean LCD and lights. I'd check that all cables are seated, that nothing is loose and causing the problem(s).
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
hugodefcon said:
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
Click to expand...
Click to collapse
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
billycar11 said:
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
Click to expand...
Click to collapse
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
hugodefcon said:
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
Click to expand...
Click to collapse
when you plug it in does it just stay at a green led?
billycar11 said:
when you plug it in does it just stay at a green led?
Click to expand...
Click to collapse
there is no light.
:c
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
im sorry to hear that i think you may be bricked ,but don't lose hope maybe someone that knows more about these phones than me can help
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
killrhythm09 said:
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
Click to expand...
Click to collapse
i was using rsd lite
i was on cm11 and wanted to go to stock retail brasil. which is 4.1.2
i cannot reach fastboot or anything.
i sent it to my carrier, i am not under warranty since i got this phone on launch but they said they will see it they can do anything but wont replace it,
if its a no go i will take it to a cell shop where i think they know a little bit more of this type of situation, bricking flashing and stuff
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
for some reason my phone no shows a green led when connected to the computer and to the wall charger but only for a little while then it starts blinking.
but is there some option i could try?