Database Info

Seido Surface II

Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm

SystmDcln said:
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
Click to expand...
Click to collapse
I have it and I like it.
Pros:
Thick enough to provide reasonable impact resistance without adding so much bulk you want a trailer for it
It has a felt/microfiber lining that makes contact with the phone, reducing wear on phone surfaces
It removes easily for docking, battery changes and the like
It's not horrid looking
Cons:
Doesn't cover the area below the screen around the trackball
It doesn't look great compared to an uncovered Nexus One
Pricey
I can't improve on this pic:
http://assets2.smartphoneexperts.com/images/product_images/accessories/additional_images/6392/large/2.jpg

I like it! Just got it in last night to replace my Case-Mate Tough Case. The Tough Case was solidly built and looked like it would probably take some serious tumbles. However the rubber trim around the screen and buttons picked up pocket lint like mad. Fortunately Case-Mate has a 100% refund on returns policy. If you don't keep your phone in a pants pocket all day and don't mind a bulkier case the Case-Mate is the way to go.
That being said, the Innocase will probably protect against most of the accidental drops you'll encounter. Previously I had an iPhone 3GS and a 2G since launch and in both cases I used the Agent18 Eco Shield slider case which is a very similar design. I'm sure that over the years I've managed to slide both of those phones over 100ft on concrete and tile without damage after fumbling them.
Try Amazon, esp. the partner retailers. I got mine for $25 shipped.

The Innocase II is a very nice case, the rubbery kind of exterior feels really great in your hands and doesn't pick up lint on the exterior. It should be able to provide reasonably good protection against drops, though I haven't had any experience with dropping my Nexus yet.
The only downsides to this case are:
1. Does not work well with all screen protectors because it fits extremely well. Read that it can't fit on top of Martin Fields screen protectors due to this, but I haven't tried it myself.
2. Picks up lint between the case and the phone. The felt lining to protect the back of the case which protects the phone when you slide it in and out of the case creates a space where the lint gathers.

When in Doubt, Get the Diztronic TPU Case.

I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!

you think it would fit the OEM wireless back cover?

Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
Technically, it does not fit the OEM wireless cover. However, I used a heat gun to stretch mine out, and the fit is OK, though not perfect. You can still see a little bit of the silver on the sides of the phone. The volume and power buttons work fine. I've been using the case now for over a week and there are no functionality issues.

Not familiar with the other backing myself. Like the other poster mentioned, it's a nice tight fit, so some finagling may be required to get it to work.

sanjurotsubaki said:
I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!
Click to expand...
Click to collapse
I agree. I had the Diztronic on my Nexus and the S5 case is even nicer. If you want something that will give a measure of protection without putting your phone in a hermetically sealed pickle jar, Diztronic is the answer.

Thanks guys! I don't come on XDA as often as I used to, but I was browsing the accessory thread this morning to do some research as to the demand of a case that will work with the wireless charging door. Nice start to my morning to find this thread!
It sounds like quite a few people want a case that will work with the official samsung charging door and their S5. I didn't make it before as my thinking was can't they just put a Qi receiver pad under their stock door and use any case they want? I guess the problem with that is it won't seal tight enough to keep water out. So a case that fits the wireless door is needed.
I'll think it over today. But I think there is a good chance well make a new case specifically for the wireless charging door. I'll post an update on our website if we do.

I would buy one. Already own diztronic case for s5 and s2. I think many of us would prefer a matte front (same finish as the back). The shiny black plastic all consumer electronic manufacturers are using looks cheap with reflections, scratches, and fingerprints.
Samsung should have included wireless charging in the s5 along with a magnetic charging port like the Nexus 10 pogo, and front speakers. Instead we have a worthless heart rate sensor.

We could try a matte front, I just don't think it looks as nice against the glossy screen. In my opinion the glossy lip blends better next to the display, almost like you don't even have a case on. Unlike our competitors that have recently started offering similar style cases as ours, only our front lip is glossy. Their cases the entire top half is glossy, similar to our old S2 case.
The S5 wireless charging door case could be a good model to test full matte on though.

Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
you could always get this it wirelessly charges through the case just fine using it on my S5 with the neo hybrid case just fine. as for keeping the water protection it seems to work just fine put my phone in the fishtank for 25 mins with no issues to test it.
http://www.amazon.com/gp/product/B00F3J2KJW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Does the diztronic case mess up screen protectors? Im using a tempered glass right now.

heshamtecom said:
With all respect, I belive Obliq Xtreme Pro is the best Galaxy S5 TPU case, have a look and let me know http://www.galaxy-s5-cases.com/
Click to expand...
Click to collapse
That's not a TPU case. It contains TPU on the inside, buts it's a dual layer two piece case with a polycarbonate shell. it's basically exactly the same as our Reactor case for the GS5. It's a fine case, but personally I don't like dual layer cases on my phone. Too bulky. According to that page you linked it weighs 5 ounces! That's a tank compared to a 21g TPU case. It's a totally different class of product then a traditional single layer TPU case. It also does appear to "borrow" heavily from UAGs design. I really hate it when companies do that, but it is what it is, happens in every industry.
---------- Post added at 08:24 AM ---------- Previous post was at 08:09 AM ----------
theo_yuxda said:
Does the diztronic case mess up screen protectors? Im using a tempered glass right now.
Click to expand...
Click to collapse
I prefer to think of it as the screen protectors not being compatible with cases I think it's far more common for someone to only have a case than to only have a screen protector. The vast majority of people using screen protectors will also use a case. However many use a case but no screen protector. Given that, companies that make screen protectors should do a better job making sure their products can be used with a case.
To answer your question (somewhat) , I used a tempered glass SP on my old S4 and one of our cases. It was a bit of a stretch, but after a day or two it fit well enough. I haven't tested it on an S5 however. We are going to start adding a small amount of depth to our cases in the future, likely 0.25mm to better accommodate thick screen protectors. We have to be careful that the case still fits well for those that don't use screen protectors. The new OnePlus One is the first case well be testing this on.

Ive had this case for my S3. Wonderful case and great price.
Unfortunately, they dont ship to the Netherlands. I really want this one
Sent from my SM-G900F using XDA Premium 4 mobile app

Supcase Unicorn Beetle

Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.

Here it is

Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?

arjun90 said:
Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?
Click to expand...
Click to collapse
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.

Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
JippleStar said:
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.
Click to expand...
Click to collapse
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
Its too bad the Skinomi Techskin does not include protection to the Chamfered edges. Neither do the other skins on the market. Bummer.

arjun90 said:
Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
Click to expand...
Click to collapse
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:

Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
JippleStar said:
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:
Click to expand...
Click to collapse

arjun90 said:
Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
Click to expand...
Click to collapse
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.

I'm already thinking about the Note 5. Will be the first in line when that comes out.
slackerz_86 said:
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.
Click to expand...
Click to collapse

Just 2 days and i have one scratch over my case screen protector. Lol!!

slackerz_86 said:
Just 2 days and i have one scratch over my case screen protector. Lol!!
Click to expand...
Click to collapse
Unreal. I'm glad I didn't buy this one.

shawnpuerto said:
Unreal. I'm glad I didn't buy this one.
Click to expand...
Click to collapse
Well it happens to every rugged case. Especially if u have keys or coins in ur bag or pocket that u put your phone with. Same goes if u do not have a casing or cover for your phone. There will be scratches too.

slackerz_86 said:
Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.
Click to expand...
Click to collapse
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.

E4gt007 said:
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.
Click to expand...
Click to collapse
I learnt a trick. U redo ur fingerprint scanning with the case on. U can do in any position and ways as long u do slow and steady. U'll find that it works better with the casing on rather than naked. For my N4, i just have to scan the top of my thumb and otz unlocked. Give a try. Just scan follow the flow of the casing design. From top till the casing.

What S6 cases is everyone using?

I'm using a vintage stylish back cover along a SGP tempered glass(9H) for the screen protection,it's good so far,for I'm not get used to the flip cover or wallet cover,it's not convenient as the brief cover as coming calls&messages,which makes it wired and also no good for video watching and daily usage. Besides, the case also with double wallet slot on the back for credit cards etc.,and two slots is enough. The slim design also enjoy another 10 scores, fine match the S6's thickness without make your device a clumsy one.
Lavet Case: http://goo.gl/Z2VA12
SGP Glass: http://goo.gl/cA9Pnl
Anyway,just share your S6 case based on your own experience,for both some help to purchase a fine case and have fun!

http://forum.xda-developers.com/galaxy-s6/accessories/reviews-post-pictures-galaxy-s6-case-t3073705
http://forum.xda-developers.com/galaxy-s6/accessories/struggle-to-acceptable-case-t3097779
http://forum.xda-developers.com/galaxy-s6/accessories/slimmest-case-available-s6-t3062011

Roigi.Manson said:
I'm using a vintage stylish back cover along a SGP tempered glass(9H) for the screen protection,it's good so far,for I'm not get used to the flip cover or wallet cover,it's not convenient as the brief cover as coming calls&messages,which makes it wired and also no good for video watching and daily usage. Besides, the case also with double wallet slot on the back for credit cards etc.,and two slots is enough. The slim design also enjoy another 10 scores, fine match the S6's thickness without make your device a clumsy one.
Lavet Case: http://goo.gl/Z2VA12
SGP Glass: http://goo.gl/cA9Pnl
Anyway,just share your S6 case based on your own experience,for both some help to purchase a fine case and have fun!
Click to expand...
Click to collapse
Is it genuine leather case? Doest it protect the camer (i.e. have a lip near camera or just thicker than the camera)? Is it soft enough inside or is it plastic inside?
I think I could go for it if there were no card holders)
Edit: found it cheaper on ebay. I think I'll order one. http://www.ebay.com/itm/Genuine-Rea...t=LH_DefaultDomain_0&var=&hash=item20fa6c88e2
Thanks

Spiegen neo-hybrid here. Minimal bulk, great grip and feel with metal buttons. I myself feel that screen protectors are unnecessary anymore, as todays gorrila glass does well enough to protect from scratches. A screen protector isn't going to stop a drop-shatter anyways. The neo is the best looking and thinnest of the 5 cases I have, all while providing two-piece drop protection.

imitebewrong said:
Spiegen neo-hybrid here. Minimal bulk, great grip and feel with metal buttons. I myself feel that screen protectors are unnecessary anymore, as todays gorrila glass does well enough to protect from scratches. A screen protector isn't going to stop a drop-shatter anyways. The neo is the best looking and thinnest of the 5 cases I have, all while providing two-piece drop protection.
Click to expand...
Click to collapse
I have the same case now. It's ok but it makes my s6 to be the size of my Oneplus One want something less bulkier. As for the screen protectors, I might disagree - tempered glasses save your phone glass from shattering almost always.

ky3bmu4 said:
I have the same case now. It's ok but it makes my s6 to be the size of my Oneplus One want something less bulkier. As for the screen protectors, I might disagree - tempered glasses saves your phone glass from shattering almost always.
Click to expand...
Click to collapse
I'm using the simple tpu Verus Crystal Light case. It's like the spigen liquid crystal clear case but looks better, has better clicky buttons and the camera and flash have separate cutouts instead of one big cutout. Also has lips to protect both the camera bezel and screen from scratches

nflwideout86 said:
I'm using the simple tpu Verus Crystal Light case. It's like the spigen liquid crystal clear case but looks better, has better clicky buttons and the camera and flash have separate cutouts instead of one big cutout. Also has lips to protect both the camera bezel and screen from scratches
Click to expand...
Click to collapse
Thanks, but I don't like the idea of transparrent case much

ky3bmu4 said:
I have the same case now. It's ok but it makes my s6 to be the size of my Oneplus One want something less bulkier. As for the screen protectors, I might disagree - tempered glasses save your phone glass from shattering almost always.
Click to expand...
Click to collapse
I respect your view on tempered glass, I have heard a lot of good things about it. Unfortunately for me, it didnt work so well the one time I needed it to. As far as cases go, the hybrid is about as thin as a current generation (protective) case could be. If you want any thinner, why would you use a case at all?

imitebewrong said:
I respect your view on tempered glass, I have heard a lot of good things about it. Unfortunately for me, it didnt work so well the one time I needed it to. As far as cases go, the hybrid is about as thin as a current generation (protective) case could be. If you want any thinner, why would you use a case at all?
Click to expand...
Click to collapse
That's an excellent question, sir!
Firstly, I beleive it will still save the back glass from shattering if I drop my phone (and I know I will drop it some day, always happens to me when after the honey moon I become more and more careless with the new toy).
Secondly, I afraid to much for the camera lens, which just waaaay too protruding to be safe, imo and also very weak according too AndroidAuthority review. (rly samsung? for 700 bucks your could not go for saphire glass on the protruding camera lens?)

My concerns with the camera lens are the same as yours, but we can't change the design of the S6. I don't think sapphire lense would help too much either. More costly, interferes with clarity, and still breaks.

I'm using the UAG case. Love this thing. Very very slim and provides the best protection for my phone out of all the cases I've owned. UAG cases might be on the top end of costs ($30-35) but it is built to last

I used a Spigen neo hybrid, but I ended up with a UAG as well
http://www.amazon.com/gp/product/B00TRG8KGO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

This leather sleeve which fits perfectly. Pretty tight actually, so no risk of your phone falling out I guess. Great quality leather and finishing I must say, they're all handmade. Price is a bit steep but you do get what you pay for and honestly, if you spend this amount of money on a phone you might as well spend some money on protecting it.
I thought about buying on of those Spigen cases which look slick, but then I thought; Samsung finally made a phone with a finish worth looking at and holding in your hand when using it, why hide that in a case?

neonsector said:
I used a Spigen neo hybrid, but I ended up with a UAG as well
http://www.amazon.com/gp/product/B00TRG8KGO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Can you post the pictures of them aside? UAG looks so much bulkier... Thanks

Currently using Speck Mighty Shell case in Fuchsia. Very durable!
Roigi.Manson said:
I'm using a vintage stylish back cover along a SGP tempered glass(9H) for the screen protection,it's good so far,for I'm not get used to the flip cover or wallet cover,it's not convenient as the brief cover as coming calls&messages,which makes it wired and also no good for video watching and daily usage. Besides, the case also with double wallet slot on the back for credit cards etc.,and two slots is enough. The slim design also enjoy another 10 scores, fine match the S6's thickness without make your device a clumsy one.
Lavet Case: http://goo.gl/Z2VA12
SGP Glass: http://goo.gl/cA9Pnl
Anyway,just share your S6 case based on your own experience,for both some help to purchase a fine case and have fun!
Click to expand...
Click to collapse

I'm using an otterbox defender for work and a ballistic jewel case on the weekends.

imitebewrong said:
Spiegen neo-hybrid here. Minimal bulk, great grip and feel with metal buttons. I myself feel that screen protectors are unnecessary anymore, as todays gorrila glass does well enough to protect from scratches. A screen protector isn't going to stop a drop-shatter anyways. The neo is the best looking and thinnest of the 5 cases I have, all while providing two-piece drop protection.
Click to expand...
Click to collapse
I just bought this case and do like it, but all of my Mediabridge microUSB cables don't fit in the opening on the bottom. Do you happen to know of any good high rated cables that fit well? Was debating getting a different case because of it that's possibly less bulky too.
-J

ky3bmu4 said:
Can you post the pictures of them aside? UAG looks so much bulkier... Thanks
Click to expand...
Click to collapse
I don't own the s6 any longer nor the cases, I bought an edge and I went with the UAG for it as well.
I cant use another case any more, UAG does it for me

neonsector said:
I don't own the s6 any longer nor the cases, I bought an edge and I went with the UAG for it as well.
I cant use another case any more, UAG does it for me
Click to expand...
Click to collapse
Nevermind, I got rid of s6 also)

I'm using Clear View Case

Bumper-only Case?

RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.

I've got one and I agree that the volume buttons are too stiff. I had to play / force them in and out with my plastic card holder edge to soften them a bit.
The lateral part are not that "firm" around the phone so unfortunately it feels a bit flabby.
It still makes the phone bulky, but according to one YouTube video where the guy toss the phone very high a few times without the phone being damaged at all, the protection is REALLY good.

roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk

eurominican said:
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
That why I bought that case from Amazon. Can't beat Prime.

I had Rhino bumper on SGS7, totally agree with you. Hard buttons and slipery material. My buttons chopped off after almost a year of wear and tear.
My gf is using Ringke Fusion (clear back case) + dbrand skin. It looks beautiful so I ordered same case for Note9 + dbrand skin. It looks much better with lighter skins. Darker skins looks great when there is enough light around you. In low light it acts almost like a mirror.
https://imgur.com/QTYcakg
No way I go back to Rhyno again. It's not bumper case but I don't mind to flip it over and show camo skin

roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!

I did that on my case on day 2, it helps but I wouldn't say it is enough. At the end, when my Rhyno bumper buttons wear I even tried to cut them out and flatten the area around button. I've got choped case with holes where buttons are placed and it was bad experience. Hard plastic, rough edges, not easy to dig and not pleasant to fingers. Too bad, unfortunately, I've used cases on same phone (sgs7 like I said) with much more tactile buttons so I gave up on Rhyno.

N1NJATH3ORY said:
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
Click to expand...
Click to collapse
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?

roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I think what’s happened as Rhinoshield get there case made in China, plus they purchase in bulk, there has been a manufacturing defect...
So at the moment Rhinoshield are stuck with the defect stock, I asked the exact same thing they would not answer me.. LOL
Razor blade is your only option! Some user say it works fine others say it dont so it's your call!
Or you can wait until they get rid of this stock and order more stock without defect! But that could be in the note 10 days!
Plus they aren’t telling me when they will get new stock, so I am guessing!

roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................

KOLIOSIS said:
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
Click to expand...
Click to collapse
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design. It's frustrating for users like me who don't drop their damn phones all the time. I haven't used a screen protector since my iPhone days and my displays have always been great during the time I've had them until I sold/donated them off to another user.
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.

roaduardo said:
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design.
Click to expand...
Click to collapse
I've tried modding a few cases where it had a clear distinction from the bumper part of the case & the back cover portion.
Same here,no success,as the remaining bumper didn't have enough rigidity to hold shape.
roaduardo said:
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
Click to expand...
Click to collapse
I totally get your design idea.
It's a different take on the 2pc metal bumper design,but,w/o the necessary assembly (screws). Remove the screws from the design,build-in some elasticity on two of the sides for easy removal-installation,yet,still holding shape & retaining edge protection.
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................

KOLIOSIS said:
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
Click to expand...
Click to collapse
If only I had the time and resources. I'm happy to see someone else take this kind of thing and run with it so I can just get myself one case. I just need one for my 6T and one for my Note 9. lol

I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Sent from my Samsung SM-N960U1 using XDA Labs

nuclearrage said:
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Click to expand...
Click to collapse
Is it wrong to assume the dbrand grip would be almost impossible to pocket?
I was just about to order the Rhino Shield.

Dbrand is slightly bigger, but very VERY grippy. I wear Duluth Trading Co. Cargo pants and always have 2 phones in the front left cargo pocket.. also fits in my work shirt front pocket. Not sure about jeans or skinny fitting clothes.
Sent from my Samsung SM-N960U1 using XDA Labs

One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.

roaduardo said:
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
Click to expand...
Click to collapse
It may have different texture for the buttons for us to feel them.
If you scroll a bit the page, you may see it.

dfwfreaks said:
Never like rhinoshield case.
They don't know how to make cases
Click to expand...
Click to collapse
It's CrashGuard #3 for me today. Trying this case out for third time since it's the only viable option today for a bumper-only case.
I followed the advice of some users who suggested using a razor to slice into parts of the volume button grooves in order to make them more tactile. I'm happy to report that it worked pretty well. The buttons are actually registering clicks much easier than out of the box. Just to make it easier, I did the same thing for the power and Bixby button.
The other problem I had with this case is the area around the S-Pen makes it very difficult to remove the S-Pen. It's too small. I have average-sized hands and I have to use my pinky in order to get the S-Pen to eject. So I also modified that area and make some incisions with my razor. Then there's how tight the case can be as you try to put it on so skins can be pushed from the edges as you can see from the photos.
I just can't stand RhinoShield's tone-def response to criticisms to their CrashGuard cases. You have users reporting defective design features and they do nothing but push back with their half-baked suggestions to make their product work instead of correcting their design flaws.
They need to listen and stop deflecting. Spigen needs to also listen to us and give us a bumper-only solution.

dfwfreaks said:
Just get a tempered glass screen protector and D brand skin, bruh.
Click to expand...
Click to collapse
Already had the Dbrand on for weeks and I've never used a screen protector on any Android phone. Last time I used a screen protector was on my iPhone 4s.